In fact, color management settings shouldn't be editing from this operator since
screenshot is using OpenGL which is in sRGB space, but fixed issues with Image
Format initialization and added NULL pointer checks.
Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
Only remaining undocumented one is IMAGE_OT_record_composite (not sure what it actually does, nor even whether it’s actually working or not...).
Note that I didn’t bother with operators flagged as OPTYPE_INTERNAL!
Added option display_type to WM_operator_properties_filesel which defines which file
display type (short/list/icons/default) should be used for file browser.
All current operators are using FILE_DEFAULTDISPLAY display type which means display
type will still be calculated based on type of opening file and user preferences
settings. Recover Auto Save operator is now using long display type so file date can
easily be checked now.
Reviewed by Andrea, thanks!
Issue was caused by incorrectly set PTS value frames came form Scene strip renderer.
This value used to be calculated from RenderData current and start frame which
lead to non-uniformuly counting which totally confuses encoder.
Switch append_avi and append_ffmpeg to use current frame from rendering scene
(which was already passing to this functions and was used mostly for logging)
and start frame of rendering scene (it's new parameter added). This allowed to
calculate correct PTS value easily and get rid of global static sframe variable
in writeavi.c file.
Looks like some codecs depends on valid PTS set for frame to encode
frame in right way. PTS is calculating based on current frame number
appending to stream which is stored in render data.
So use rd.cfra in screenshot_startjob() instead of keeping own variable
for reporting current frame number.
Now codecs should be happy and work nice.
- File Window: when opened with operator (save, load, etc), you
couldn't start a new one, causing memleaks. Now it nicely
refreshes file window for new operator.
Also means you can make CTRL+F3 screenies of filewindow now.
- CTRL+F3 screenshot had memleak on cancel.
The main reason to have this is so renders can be scripted to write to a specific file without having to do annoying tricks like set a dummy start/end frame range, render an animation and work out the current frame image will be written to, then rename after rendering.
Also made some 'char *' args into 'const char *'
Both stored the filename of the blend file, but G.sce stored the last opened file.
This will make blender act differently in some cases since a relative path to the last opened file will no longer resolve (which is correct IMHO since that file isnt open and the path might not even be valid anymore).
Tested linking with durian files and rendering to relative paths when no files is loaded however we may need to have some operators give an error if they are used on the default startup.blend.
- removed deprecated bitmap arg from IMB_allocImBuf (plugins will need updating).
- mostly tagged UNUSED() since some of these functions look like they may need to have the arguments used later.
path -> filepath (for rna and operators, as agreed on with elubie)
path -> data_path (for windowmanager context functions, this was alredy used in many places)
- added relative option to saving external multires data
- renamed multires external functiosn to have save / pack as suffix.
- added TODO's for file select operators that should support relative paths but dont.
- also disable openmp on linux cross compile, mingw currently isnt linking -lgomp
Now, rather than the bit-too-alarming stop sign, threaded wmJobs
display a progress indicator in the header. This is an optional feature
for each job type and still uses the same hardcoded ui template
(could use further work here...).
Currently implemented for:
Render - parts completed, then nodes comped
Compositor - nodes comped
Fluid Sim - frames simulated
Texture Bake - faces baked
Example: http://mke3.net/blender/devel/2.5/progress.mov
tile cache code in imbuf, but it is not hooked up to the render engine.
Imbuf module: some small refactoring and removing a lot of unused or old code
(about 6.5k lines).
* Added a ImFileType struct with callbacks to make adding an file format type,
or making changes to the API easier.
* Move imbuf init/exit code into IMB_init()/IMB_exit() functions.
* Increased mipmap levels from 10 to 20, you run into this limit already with
a 2k image.
* Removed hamx, amiga, anim5 format support.
* Removed colormap saving, only simple colormap code now for reading tga.
* Removed gen_dynlibtiff.py, editing this is almost as much work as just
editing the code directly.
* Functions removed that were only used for sequencer plugin API:
IMB_anim_nextpic, IMB_clever_double, IMB_antialias, IMB_gamwarp,
IMB_scalefieldImBuf, IMB_scalefastfieldImBuf, IMB_onethird, IMB_halflace,
IMB_dit0, IMB_dit2, IMB_cspace
* Write metadata info into OpenEXR images. Can be viewed with the command
line utility 'exrheader'
For the image tile cache code, see this page:
http://wiki.blender.org/index.php/Dev:2.5/Source/Imaging/ImageTileCache
* Division by zero fix for TNT SVD code.
* Sound fix, in case ffmpeg decode fails, don't use the samples.
* Fix for incorrect bounds of transformed objects in new raytracing code.
* Gave memory arena's a name used for allocations for easier memory
usage debugging.
* Dupligroup no_draw option was using layers but not restrict view/render
setting. (not a bugfix exactly but would do display list context switching
while drawing for no reason).
* Fix objects instanced on hair particles not giving consistent results
when the object is transformed.
* New math functions: madd_v4_v4fl, len_squared_v3v3, interp_v4_v4v4v4,
mul_v4_m4v4, SH and form factor functions, box_minmax_bounds_m4.
* mul_m4_m4m4 and mul_m3_m3m3 now accept the same pointers for multiple
arguments.
* endjob callback for WM jobs system.
* Geometry node uv/color layer now has search list/autocomplete.
* Various small buildsystem tweaks, not strictly needed yet in trunk.
Only source/blender/editors/ dir, should not give errors on different platforms
Only removing: UI_*.h, ED_*.h, WM_*.h, DNA_*.h, IMB_*.h, RNA_*.h, PIL_*.h
