The //Raycast// node intersects rays from one geometry onto another.
It computes hit points on the target mesh and returns normals, distances
and any surface attribute specified by the user.
A ray starts on each point of the input //Geometry//. Rays continue
in the //Ray Direction// until they either hit the //Target Geometry//
or reach the //Ray Length// limit. If the target is hit, the value of the
//Is Hit// attribute in the output mesh will be true. //Hit Position//,
//Hit Normal//, //Hit Distance// and //Hit Index// are the properties of the
target mesh at the intersection point. In addition, a //Target Attribute//
can be specified that is interpolated at the hit point and the result
stored in //Hit Attribute//.
Docs: D11620
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D11619
This node creates splines with more control points in between the
existing control points. The point is to give the splines more
definition for further tweaking like randomization with white noise,
instead of deforming a resampled poly spline with a noise texture.
For poly splines and NURBS, the node simply interpolates new values
between the existing control points. However, for Bezier splines,
the result follows the existing evaluated shape of the curve, changing
the handle positions and handle types to make that possible.
The number of "cuts" can be controlled by an integer input, or an
attribute can be used. Both spline and point domain attributes are
supported, so the number of cuts can vary using the value from the
point at the start of each segment.
Dynamic curve attributes are interpolated to the result with linear
interpolation.
Differential Revision: https://developer.blender.org/D11421
The minimum twist mode is important because it allows creating
normals without sudden changes in direction. The disadvantage
of minimum twist normals is that the normals depend on all control
points. So changing one control point can change the normals
everywhere. The computed normals do not match the existing
code exactly, although they do match quite well on non-cyclic and
on some cyclic curves. I also noticed that the existing implementation
has some fairly simple failure cases that I haven't found in the new
implementation so far.
Differential Revision: https://developer.blender.org/D11621
This makes the parts where a node is locked more explicit. Also, now the thread
is isolated when the node is locked. This prevents some kinds of deadlocks
(which haven't happened in practice yet).
- BKE_mesh_copy_parameters_for_eval to be used for evaluated meshes only
as it doesn't handle ID user-counts.
- BKE_mesh_copy_parameters is a general function for copying parameters
between meshes.
Refactor function `freeSeqData` so it is readable.
One strip can have multiple transform operations defined. To prevent
processing strip multiple times, build `SeqCollection` and use
sequencer iterator instead of iterating `TransData` directly.
No functional changes.
Differential Revision: https://developer.blender.org/D11618
Reduce complexity of sequencer transform code by removing recursivity.
This is possible by treating meta strips (mostly) as any other strip and
containing all transform code within SEQ_ functions.
Unfortunately internally meta strips still require special treatment,
but all complexity from code all over transform code seems to be
possible to contain within one function.
Functional change:
Previously adjusting handle of single image strip moved animation.
Now animation is not moved, which is behavior for all other strips.
Reviewed By: sergey, mano-wii
Differential Revision: https://developer.blender.org/D11493
Starts scrolling when dragging a node or node link and going outside the current window.
Largely copied from the VIEW2D_OT_edge_pan operator.
Edge panning operator customdata and supporting functions now in
UI_view2d.h, so they could be used by operators in other editor
libraries. The VIEW2D_OT_edge_pan operator also uses this customdata and
shared functions now. Operators properties can be used to configure
edge panning margins and speed for each use case, rather than using
hardcoded values.
The speed function for edge panning has been tweaked somewhat:
* "Speed per pixel" has been replaced with a "speed ramp" distance.
This is more intuitive and also creates an upper bound for the speed,
which can otherwise become extreme with large cursor distance.
* "Max speed" is reached at the end of the speed ramp.
* Padding the region inside and outside is applied as before, but both
values are operator properties now.
Node transform operator also supports edge panning. This requires
an offset for changes in the view2d rect, otherwise nodes are "stuck"
to the original view.
Transform operator had cursor wrapping categorically enabled, but this
gets quite confusing with the edge scrolling mechanism. A new TransInfo
option T_NO_CURSOR_WRAP has been introduced to disable this behavior.
The double negative is a bit annoying, but want to avoid affecting the
existing transform modes, so by default it should still set the
OP_IS_MODAL_GRAB_CURSOR flag (which then sets the WM_CURSOR_WRAP_XY
flag during modal execution).
Reviewed By: HooglyBoogly, JacquesLucke
Differential Revision: https://developer.blender.org/D11073
This allows line art to run only once for each modifier stacks,
with an option to toggle a specific line art modifier should
use cache or re-do their own calculations.
Reviewed By: Sebastian Parborg (zeddb), Hans Goudey (HooglyBoogly)
Differential Revision: https://developer.blender.org/D11291
This makes it easier to use task isolation in c++ code.
Previously, one either had to check `WITH_TBB` (possibly indirectly
through `WITH_OPENVDB`) or one had to use the C function which
is less convenient.
This namespace groups threading related functions/classes. This avoids
adding more threading related stuff to the blender namespace. Also it
makes naming a bit easier, e.g. the c++ version of BLI_task_isolate could
become blender::threading::isolate_task or something similar.
Differential Revision: https://developer.blender.org/D11624
Similar to what we do for constraints and modifiers, except that
currently adding or editing shaderfx in liboverride objects is
completely unsuported.
Fix T88974.
Used to detect if a shaderfx is purely local, or comes from linked data,
in case of a liboverride.
Not actually used yet since we do not currently support adding
shaderfx's to overrides, but will be in the future, and matches
constraints and modifiers code.
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
On selecting a multi-layer image with a combined pass, a "Combined"
socket is created and default combined pass socket "Image" is
disabled by setting `SOCK_UNAVAIL` flag. When converting into
operations, `ImageNode` converts alpha socket on finding any socket with
a combined pass without checking the flag.
Since commit rB93e2491ee724 an assertion fails when mapping sockets
twice because now map `add_new` is used.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11566
Adds full frame implementation to Value node operation.
No functional changes.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11594
- Include all objects in pose mode.
- Show the number of objects in pose mode.
- Show the number of objects in edit mode for all types of objects
(not just meshes).
This adds support for importing UV sets which are defined per vertex,
instead of per face corners. Such UV sets can be generated when the
mesh is split according to UV islands, or when there is only one UV
island, in which cases only a single UV value can be stored per
vertex since vertices will never be on a seam.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D11584
Implementation of T86970. This node takes a geometry input with
multiple components and outputs them by component type. Meshes,
Curves, and Point Clouds support combining multiple input instances,
while volumes will only output the first volume component input until
suitable instance realization for multiple volumes is finished.
When direct geometry instancing is implemented it will be possible to
avoid realizing instances in this node.
Differential Revision: https://developer.blender.org/D11577
Creating a new full screen area had it's area initialized as empty,
updating the screen then set the area to a 3D view (as a fallback),
before the actual area type was set.
This made setting the intended space-type run the 3D views exit callback
on a 3D view without a View3D struct allocated, which the exit callback
needed to account for.
Resolve by calling ED_screen_change after the area type has been set.
This patch improves the 3DView statistics overlay to show LOCAL stats
while in local view. This means the stats can vary between 3DViews and
the statusbar when views are in local view, but this gives a much more
accurate count of the objects, and their components, that you are
directly working with rather than just scene values.
Differential Revision: https://developer.blender.org/D8883
Reviewed by Campbell Barton
Versioning code for converting strip offset property doesn't work, when
property was animated and disabled or when crop was used.
When offset property is animated and offset is enabled, animation is
converted to be used with new transform design. When offset is disabled,
animation is left untouched. New transform design doesn't have option
to disable offset, and therefore old unconverted animation is used
instead of converted static value.
Remove animation from propery if it was unused.
Another issue was that both X and Y offset animation was being corrected
by factor caluclated for X channel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11370
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
Just like the way we often have a choice between an attribute input and
a single float, this adds the ability to choose between attribute and
integer input sockets, useful for D11421.
There is no particular reason these two functions shouldn't be used
outside of the bezier spline implementation since they don't do anything
particularly controversial.
Create maps that specify which batches have vbo or ibo as a reference
and use these maps to discard batches along with buffers.
Differential Revision: https://developer.blender.org/D11588
