Baking vertex colors per-corner leads to unwanted discontinuities when there is
sampling noise, for example in ambient occlusion or with a bevel shader node for
normals. For this reason the code used to always average results per-vertex.
However when using split normals, multiple materials or UV islands, we do want to
preserve discontinuities. So now bake per corner, but make sure the sampling seed
is shared for vertices.
Fix T85550: vertex color baking crash with split normals, Ref D10399
Fix T84663: vertex color baking blending at UV seams
In two cases the percentage property was actually used incorrectly, as
pointed out in T82070. The range was [0, 1], but the properties were still
displayed as percentages.
There is a preference to control whether to display factors or
percentages, so it usually doesn't make sense to manually define
properties as percentages.
Resolves T82070
Differential Revision: https://developer.blender.org/D9344
Regression from d8992192e5
The original code relied on having a separate edit-object pointer
than the active object.
Use a utility function to avoid code duplication as there are
other areas that have similar functionality.
- Rename to "Link/Transfer Data".
- Move Mesh Data Transfer operators here from the Relations sub-menu.
- Clarify which operations links to, copies or transfers/projects
data using Link, Copy and Transfer leading text.
- Re-order contents to fit each category and add separators.
- Add enum tool-tips.
Reviewed By: Blendify, campbellbarton pablovazquez, mont29
Ref D10090
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
When dragging an object into the 3D View, e.g. from the Outliner or the Asset
Browser, other objects wouldn't get deselected. That differs from what other
drop operations do, which create a new object. They deselect other objects in a
lower-level function, which happens to not be called for just dropping objects.
So I guess this is an oversight.
Old behavior was also a bit annoying because users seem to expect this to
deselect.
Outliner display under 'Animation' > 'NLA Tracks' was not updating in
the following cases:
- adding strips
- removing strips
- duplicating strips (possibly to different track)
- swapping strips
- reordering tracks
- changing strip order by translating
- translating strips between tracks
- renaming tracks
In the case of deleting strips/tracks, this was also resulting in a use-
after-free error in Outliner drawing code (this was reported specifically
in T84586).
Most of these operators already sent a ND_NLA|NA_EDITED notifier, but the
Outliner is not listening to these. Listening to NA_EDITED is also not
what we want since this also happens a lot in cases irrelevant to the
Outliner. Now be a bit more specific and send ND_NLA|NA_ADDED / ND_NLA|
NA_REMOVED or a new ND_NLA_ORDER (to distinguish from NA_EDITED
'only' - where a redraw is not neccessary) and listen to these from the
Outliner.
(note: places that were listening to ND_NLA|NA_EDITED before are also
listening to NA_ADDED or NA_REMOVED, so changing NA_EDITED should not be
a problem here)
(note 2: for cases like swapping tracks/strips order, NA_ADDED or
NA_REMOVED does not make sense, neither can we use NA_EDITED [since we
dont want to listen to this], so in this case an additional ND_NLA_ORDER
is now sent)
(note 3: in nla transform code, this is now always sent on confirm. There
are cases were the notifier would not be needed, but checking exactly all
cases were it actually would be needed seems overkill [history of D10073
has example code to check if strips moved between tracks])
Maniphest Tasks: T84586
Differential Revision: https://developer.blender.org/D10073
When using grease pencil for drawing Storyboards, it's very common to require a transform of the layers. This transform can be done using the offset modifier, but in some cases, the scene requires a lot of modifiers and makes the file hard to work.
This new feature adds a transforms Location, Rotation and Scale at Layer level, and allows to transform the layer without using a modifier, keeping the scene more clean.
{F9480695}
This feature was suggested by @pepeland after receiving feedback from several artists.
Also, done some code cleanup and rename some functions to get a better naming.
Maniphest Tasks: T83660
Differential Revision: https://developer.blender.org/D9761
This commit changes the check at the beginning of the
"Make Instances Real" operator to account for the instances
created by nodes modifiers in the modifier stack.
Differential Revision: https://developer.blender.org/D10059
- Use the name "Point Cloud" instead of "Pointcloud"
- Fix a typo in UV_OT_smart_project.
- Use the name "Install Light" to for the installation
operator for MatCaps, HDRIs, and Studio Lights.
Fixes T83585, T65291, and T54921
Differential Revision: https://developer.blender.org/D9867
Since the introduction in rB2221389d6e8e, baking to vertex colors would
still check for the existence of a valid UVMap (as if baking to image
textures).
Now check for vertex colors instead if target is
R_BAKE_TARGET_VERTEX_COLORS.
Maniphest Tasks: T84416
Differential Revision: https://developer.blender.org/D10006
When using "Make Links"->"Materials" regular materials could be linked
onto grease pencil objects. This caused a number of issues.
The fix changes the `allow_make_links_data` function to make sure that
if one object is of type `OB_GPENCIL`, the other has to be aswell.
Reviewed By: antoniov
Maniphest Tasks: T84420
Differential Revision: https://developer.blender.org/D10014
'Caused'/revealed by rBd29a720c45e5: Operators that fully re-create the
mesh would previously rely on `sculpt_update_object` called from update
code to get required sculpt-specific data layers re-added to the new
mesh.
Now instead put all code adding data to orig mesh for sculpt purpose
into a new util function (`BKE_sculpt_ensure_orig_mesh_data`), and call
that function when entering sculpt mode, and from voxel remesher code.
This is contonuing effort to more clearly separate orig data from evaluated
data handling/usage in sculpt code.
TODO: there are likely other code paths that would need to call that
new function?
Reviewers: @sergey, @pablodp606
Subscribers:
Steps to reproduce were:
* Drag object icon from the Outliner into the 3D view (or an object asset from
the Asset Browser)
* Open the "Adjust Last Operation" panel
* Edit options in there - the object would move to the mouse location
The same issue happens with collection instance and object data adding (e.g.
via drag & drop). This patch addresses them too.
The operator used the event state stored in the window. This shouldn't be
accessed from the operator execute callback generally which happened here.
Especially not if the operator supports editing properties.
Use the BMesh symmetrize operator instead of using the modifier code.
While we could support shape-keys with the existing code used by the
mirror modifier, we'd need to add code-paths for evaluated mesh & bmesh
conversion to handle shape-keys differently just for this one case,
since we want to avoid copying & processing shape-keys layers for
evaluated meshes in general.
These two operators (one for grease pencil, one for other objects)
copy a single modifier from the active object to all selected objects.
The operators are exposed in the dropdown menus in modifier headers.
Note that It's currently possible to drag and drop modifiers between
objects in the outliner, but that only works for dragging to one object
at a time. Modifiers can also be copied with the "Make Links" operator,
but that copies *all* modifiers rather than just one. The placement
and scope of these new operators allow for more useful poll messages
and error messages as well.
Every object type that supports modifiers is supported. Although hook
and collision modifiers aren't supported because of an unexplained
comment in `BKE_object_copy_modifier`, other than that, every modifier
type is supported, including particle systems, nodes modifiers, etc.
The new modifiers are set active, which required two small tweaks to
`object.c` and `particle.c`.
Reviewed By: Hans Goudey (with additional edits)
Differential Revision: https://developer.blender.org/D9537
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
Approximately 195 changes of capitalization to conform to MLA title style.
UI labels and property names should use MLA title case, while descriptions
should be capitalized like regular prose, generally with only the start of
a sentence capitalized.
Differential Revision: https://developer.blender.org/D9922
In the Bake > Output panel, there is now a choice between Image Textures and
Vertex Colors. The active vertex color layer is used for baking. This works
with both existing per-corner and sculpt per-vertex vertex colors.
Split of internal/external image bake target code off into smaller functions and
refactor associated data structures for clarity. Designed so that a vertex color
bake target is easy to fit in.
Also avoid passing in a huge number of arguments into the main baking function,
pass a struct instead.
Weight Paint Multi-Paint definitely depends on the weight specific
flag, and vertex group locking also involves group name symmetry
via BKE_object_defgroup_mirror_selection. These two are also
features implemented by me so I feel confident.
The rest of object_vgroup.c possibly should be changed too, but
that requires more consideration than these obvious cases.
Expand abbreviations for words like "Bright" (instead of "Brightness"),
"Premul", "Lib", "Dir", etc.
Differential Revision: https://developer.blender.org/D9862
Some weird proxies apparently can have a local collection instancing...
Not sure this is even really valid for proxies, but in any case we
cannot override that, just detect and properly cancel the operation
then.
Should be backported to 2.91.1 should we do it.
Since a few versions (even before 2.79) we have an option that allows to restrict the vertex tools to operate only on deform groups. This was originally implemented for working with vertex groups for skeletal animation. In that case it is fortunate to have weight tools operate only on deforming vertext groups (vgroups assigned to bones)
In previous versions of Blender (up to 2.79) we have been able to use this option in Mesh Edit mode regardless of the armature mode. The current implementation (since 2.80 as far as i know) enables this option only when the associated armature is in pose mode. this has a bad consequence:
It is not at all intuitive that you have to put the armature into Pose mode before you can make use of the option in mesh edit mode.
Besides this it is not even necessary in the case when the user wants to restrict the tool only to all pose bones. In that case the armature can safely be kept in Object mode. However, when the tool shall apply only to selected pose bones, then it actually makes sense to have the armature in pose mode (as it is implemented right now)
I do not know why this feature has been restricted as described above. It must have got lost somewhere on the way to Blender 2.90
This patch fixes the issue as it allows to select the "restrict to pose bones" option when the armature is in any mode. I see no downsides of this change, actually this is a fix for a feature that once worked and apparently got forgotten in newer releases.
Reviewed By: sybren, campbellbarton
Differential Revision: https://developer.blender.org/D9658
The geometry-nodes features no longer depend on the point cloud object.
Therefore the point cloud object, although important in the future, can
be postponed until we have render and edit mode fully working.
This reverts commits:
* ea74ed5a7a.
* dc614c68ef.
