Causing a flurry of refresh file prompts post-commit,
Confusing local diffs and causing merge conflicts,
Stating the obvious; redundant and useless...
We shall not miss thou, blasted expand $keywords$
rendering, to prevent any race condition problems
I've noticed some weird and random crashes recently while rendering,
which I suspect have been arising from having an Action Editor open
while rendering. Previously only the timeline was patched against
these problems, though the issues may be more widespread. Hence,
solving this problem at the root cause instead.
keyframe lines are wrapped up nicely by it
Ideally it could be made so that it only became wide when it is on a
frame with a keyframe, though that could end up causing performance
problems, so this will have to do (if a bit "chunky" looking at
times).
* Keyframe lines were being drawn too short when frame number box was
enabled. The code for drawing this was modifying the View2D view-space
to get it's stuff in the right place, but the timeline code was not
accounting for this.
* In order to make the time ticks more visible outside the frame
range, I've moved the start/end frame drawing stuff in timeline to
occur after the grid drawing, and to draw semi-transparent, just like
the preview range curtains in the other animation editors
Channels can now be used as "animation containers" to be filtered
further to obtain a set of subsidiary channels (i.e. F-Curves
associated with some summary channel).
The main use of this is that object and scene summary channels can now
be defined without defining the filtering logic in three different
places - once for channel filtering, once for drawing keyframes in
action editor, and once for editing these keyframes.
An indirect consequence of this, is that the "Only selected channels"
option in Timeline will now result in only the keyframes for a
selected bones getting shown (when enabled), instead of all keyframes
for the active object. This was requested by Lee during Durian, and is
something which has only become possible as a result of this commit.
Committed changes from previous weeks, biggest changes are:
* Canvas can now have multiple "surfaces" that each can have specific format, type and settings.
* Renewed UI to support this new system.
* Aside from old "image sequence" output format, Dynamic Paint can now work on vertex level as well. Currently vertex paint and displace are supported.
* Integrated vertex level painting with Point Cache.
* Added viewport preview for Point Cache surfaces.
Due to massive amount of changes, old Dynamic Paint saves are no longer supported. Also some features are temporarily missing or may not work properly.
Migrating "redraws" settings from TimeLine view data to per Screen.
The options are now still shown in the TimeLine "Playback" menu
though.
This means that whatever redraw settings you set in a TimeLine editor
will be used throughout a screen (i.e. editor layout) to determine
which editors will get updated during playback, instead of only
certain editors doing certain things at vague times.
---
Also, I moved some version patches pre 2.56 version bump into a
version-check for 2.56. These must've been missed when doing the
release...
* Argh my bad, sorry about this!
* Now only the actual data array is saved to avoid constant re-allocations, but no relations to active data are kept.
* Also reverted Ton's quick fix for the crash as it's not needed anymore.
* Timeline didn't listen to file read notifier, so the pointcache frames indicator didn't get updated.
* Also added listens to particle & modifier (cloth, sb & smoke) notifiers as changes that cleared a pointcache weren't shown directly in the timeline either.
* The timeline display was also always one frame behind the actual state, since the notifiers are handled before the actual dynamics are calculated.
** This is now fixed too, by creating the actual drawn data always at drawtime.
Based on patch from Alexander Kuznetsov. Own changes:
- Keyframes in timelime depends on active object, so timelime better be
listeing to ND_OB_ACTIVE notifier rather than ND_OB_SELECT
- When scene is changing in this operator NC_WINDOW notifier would be send
and the whole interface would be redrawed, so no need in ND_OB_ACTIVE in
this case
* The existence of cached frames was checked each frame causing hundreds of disk operations per frame update.
* Pointcache now keeps an updated array of the cached frames for fast "frame exists in cache" queries.
* This fix also speeds up some other pointcache operations nicely.
This happened/was most noticeable when clicking on a bone of an armature in posemode but not active (i.e. some object other than the armature is active when trying to select the bone).
* Added ND_FRAME_RANGE to the header listener, changing frame range in Properties Window didn't update it in the timeline, reported by Hardworker in IRC. Thanks!
* Main Area Listener doesn't listen to all NC_SCENE Notifiers now, only selected ND Notifiers, like the header does. This is more efficient. If there is a reason to let it listen to all NC_SCENE notifiers, please tell me. :)
This started off doing pointcache debugging but it's also very useful for users too.
Previously it was very hard to see the state of the system when you're working caches
such as physics point cache - is it baked? which frames are cached? is it out of date?
Now, for better feedback, cached frames are drawn for the active object at the bottom
of the timeline - a semitransparent area shows the entire cache extents, and more
solid blocks on top show the frames that are cached. Darker versions indicate it's
using a disk cache.
It can be disabled in general in the timeline View -> Caches menu, or by each individual
system that can be shown.
There's still a bit to do on this, behaviour needs to be clarified still eg. deciding what
shows when it's out of date, or when it's been played back but not cached, etc. etc.
Part of this is due to a lack of definition in the point cache system itself, so we should
try and clean up/clarify this behaviour and what it means to users, at the same time.
Also would be interested in extending this to other caches such as fluid cache,
sequencer memory cache etc. in the future, too.
Only source/blender/editors/ dir, should not give errors on different platforms
Only removing: UI_*.h, ED_*.h, WM_*.h, DNA_*.h, IMB_*.h, RNA_*.h, PIL_*.h
Blender too now! :)
** Drag works as follows:
- drag-able items are defined by the standard interface ui toolkit
- each button can get this feature, via uiButSetDragXXX(but, ...).
There are calls to define drag-able images, ID blocks, RNA paths,
file paths, and so on. By default you drag an icon, exceptionally
an ImBuf
- Drag items are registered centrally in the WM, it allows more drag
items simultaneous too, but not implemented
** Drop works as follows:
- On mouse release, and if drag items exist in the WM, it converts
the mouse event to an EVT_DROP type. This event then gets the full
drag info as customdata
- drop regions are defined with WM_dropbox_add(), similar to keymaps
you can make a "drop map" this way, which become 'drop map handlers'
in the queues.
- next to that the UI kit handles some common button types (like
accepting ID or names) to be catching a drop event too.
- Every "drop box" has two callbacks:
- poll() = check if the event drag data is relevant for this box
- copy() = fill in custom properties in the dropbox to initialize
an operator
- The dropbox handler then calls its standard Operator with its
dropbox properties.
** Currently implemented
Drag items:
- ID icons in browse buttons
- ID icons in context menu of properties region
- ID icons in outliner and rna viewer
- FileBrowser icons
- FileBrowser preview images
Drag-able icons are subtly visualized by making them brighter a bit
on mouse-over. In case the icon is a button or UI element too (most
cases), the drag-able feature will make the item react to
mouse-release instead of mouse-press.
Drop options:
- UI buttons: ID and text buttons (paste name)
- View3d: Object ID drop copies object
- View3d: Material ID drop assigns to object under cursor
- View3d: Image ID drop assigns to object UV texture under cursor
- Sequencer: Path drop will add either Image or Movie strip
- Image window: Path drop will open image
** Drag and drop Notes:
- Dropping into another Blender window (from same application) works
too. I've added code that passes on mousemoves and clicks to other
windows, without activating them though. This does make using multi-window
Blender a bit friendler.
- Dropping a file path to an image, is not the same as dropping an
Image ID... keep this in mind. Sequencer for example wants paths to
be dropped, textures in 3d window wants an Image ID.
- Although drop boxes could be defined via Python, I suggest they're
part of the UI and editor design (= how we want an editor to work), and
not default offered configurable like keymaps.
- At the moment only one item can be dragged at a time. This is for
several reasons.... For one, Blender doesn't have a well defined
uniform way to define "what is selected" (files, outliner items, etc).
Secondly there's potential conflicts on what todo when you drop mixed
drag sets on spots. All undefined stuff... nice for later.
- Example to bypass the above: a collection of images that form a strip,
should be represented in filewindow as a single sequence anyway.
This then will fit well and gets handled neatly by design.
- Another option to check is to allow multiple options per drop... it
could show the operator as a sort of menu, allowing arrow or scrollwheel
to choose. For time being I'd prefer to try to design a singular drop
though, just offer only one drop action per data type on given spots.
- What does work already, but a tad slow, is to use a function that
detects an object (type) under cursor, so a drag item's option can be
further refined (like drop object on object = parent). (disabled)
** More notes
- Added saving for Region layouts (like split points for toolbar)
- Label buttons now handle mouse over
- File list: added full path entry for drop feature.
- Filesel bugfix: wm_operator_exec() got called there and fully handled,
while WM event code tried same. Added new OPERATOR_HANDLED flag for this.
Maybe python needs it too?
- Cocoa: added window move event, so multi-win setups work OK (didnt save).
- Interface_handlers.c: removed win->active
- Severe area copy bug: area handlers were not set to NULL
- Filesel bugfix: next/prev folder list was not copied on area copies
** Leftover todos
- Cocoa windows seem to hang on cases still... needs check
- Cocoa 'draw overlap' swap doesn't work
- Cocoa window loses focus permanently on using Spotlight
(for these reasons, makefile building has Carbon as default atm)
- ListView templates in UI cannot become dragged yet, needs review...
it consists of two overlapping UI elements, preventing handling icon clicks.
- There's already Ghost library code to handle dropping from OS
into Blender window. I've noticed this code is unfinished for Macs, but
seems to be complete for Windows. Needs test... currently, an external
drop event will print in console when succesfully delivered to Blender's WM.
When 'Only Selected' is ON, or the Active Object is in PoseMode, only the keyframes for the active Object are drawn (*).
Otherwise, the keyframes for the scene (sequence+nodes+world), and the selected Objects (including the Active Object) are drawn.
(*) I've also made some changes here to try and get only the selected bones showing here, but some further changes are still needed for that to be able to work.
---
Also, fixed bug in makesrna caused by missing newlines for error prints. This resulted in all error-output from makesrna appearing on a single line.
