- use NULL rather then 0 where possible (makes code & function calls more readable IMHO).
- set static variables and functions (exposed some unused vars/funcs).
- use func(void) rather then func() for definitions.
oldbump -> original
newbump -> compatible
*new* -> default (3tap)
*new* -> best quality (5tap)
the latter two have an option to apply bumpmapping in
viewspace - much like displacement mapping
objectspace - default (scales with the object)
texturespace - much like normal mapping (scales)
Many thanks to them!
For comparison, see here:
http://kishalmi.servus.at/3D/bumpcode/
Based on algorithm in: Mikkelsen M. S.: Simulation of Wrinkled Surfaces Revisited.
http://jbit.net/~sparky/sfgrad_bump/mm_sfgrad_bump.pdf
This fixes bugs:
#24591: Artefacts/strange normal mapping when anti-aliasing is on
#24735: Error at the Normal function.
#24962: Normals are not calculated correctly if anti-aliasing is off
#25103: Weird artefacts in Normal
This will break render compatibility a bit, but fixing this bugs would have also
done that, so in this case it should be acceptable.
Patch committed with these modifications:
* Bump method Old/3-Tap/5-Tap option in UI, 3-Tap is default
* Only compute normal perturbation vectors when needed
* Fix some middle of block variable definitions for MSVC
After loading file, the Undo-push happened too early, causing an
undo for the first action to show animated setups wrong.
(material.c: removed old crap)
The icons for materials were always lagging or not updating
at all. I also found it suspicious slow...
It appeared that the icons now store a "mip level", where for
every change in Materials 2 render jobs for icons were started,
one for 32x32 pix, one for 96x96. The latter was cancelling out
the first job almost always.
Also made preview renders detect size, to set amount of tiles
to be rendered. Small icons use 1 part, larger previews 16 now.
All in all, behaves much smoother now! But, will also update
the thread Jobs manager to allow "delayed jobs" like for icons,
these are aggressively put as first in the jobs list.
Preview render for node shaders broke, caused by localizing
materials last week, to prevent thread crashes. Fixed now.
Also added a temp fix to draw color-management corrected
node previews default. Will follow scene setting tomorrow.
Also: SSS in nodes doesn't render yet. Was issue in 2.4 too...
Two isses:
- Material assigning to MetaBalls used wrong pointer
(copy paste error, casting badly).
- Checking for node-material used wrong RNA pointer
(confusing void stuff going on here!)
The error leads to corruption in data and/or random
crashes. Better update svn now!
Also use const char in many other parts of blenders code.
Currently this gives warnings for setting operator id, label and description since these are an exception and allocated beforehand.
- set_frame() --> frame_set()
- set_context_pointer() --> context_pointer_set()
material adding works for curves and metaballs, new function to remove materials.
materials.link() didnt well fit how this is used elsewhere
- order matters
- it can be linked more than once.
- remove(material), isnt that useful since you need to manage indicies.
... use list style functions instead. materials.append(mat) / materials.pop(index)
- if a group has one or more objects in it, it gets a refcount of 1 on load (unchanged from before)
- dupli-groups, and materials no longer add/remove a reference.
- now groups are only freed when they contain no objects or when manually unlinked.
- BGE Shader.setSampler(name, index): index range check was wrong.
- Compositor check for an invalid channel was incorrect.
- getting the center of selected verts used an uninitalized z axis.
- do_init_render_material() used && rather then & when testing for MA_TRANSP.
- weight paint activate flipped bone used && rather then & for flag checking.
Ambient occlusion: multiplied with direct lighting by default, add
is also still available and more blending methods might be added if
they are useful. This is fundamentally a non physical effect.
Environment lighting: always added as you would expect (though you can
subtract by specifying negative energy). This can be just white or take
colors or textures from the world.
Indirect lighting: only supported for AAO at the moment (and is still
too approximate), and also is always added. A factor is available to
specify how much is added, though value 1.0 is correct.
Also:
* Material ambient value now defaults to 1.0.
* Added Environment, Indirect and Emit pass.
* "Both" blending method is no longer available.
* Attenuation, sampling parameters are still shared, some could be split
up, though if they are different this would affect performance.
Also: Changed 'Spread' value to be proportional to the light cache voxel grid
(i.e. 0.5 spreads half the width of the grid), so that it's independent of light
cache resolution. This means that results should be similar as you increase/
decrease resolution.
* Convert all code to use new functions.
* Branch maintainers may want to skip this commit, and run this
conversion script instead, if they use a lot of math functions
in new code:
http://www.pasteall.org/9052/python
Volumes can now receive shadows from external objects, either raytraced shadows or shadow maps.
To use external shadows, enable 'external shadows' in volume material 'lighting' panel. This an extra toggle since it causes a performance hit, but this can probably be revisited/optimised when the new raytrace accelerator is integrated. For shadow maps at least, it's still very quick.
Renamed 'scattering mode' to 'lighting mode' (a bit simpler to understand), and the options inside. Now there's:
- Shadeless
takes light contribution, but without shadowing or self-shading (fast)
good for fog-like volumes, such as mist, or underwater effects
- Shadowed (new)
takes light contribution with shadows, but no self-shading. (medium)
good for mist etc. with directional light sources
eg. http://vimeo.com/6901636
- Shaded
takes light contribution with internal/external shadows, and self shading (slower)
good for thicker/textured volumes like smoke
- Multiple scattering etc (still doesn't work properly, on the todo).
After code review and experimentation, this commit makes some changes to the way that volumes are shaded. Previously, there were problems with the 'scattering' component, in that it wasn't physically correct - it didn't conserve energy and was just acting as a brightness multiplier. This has been changed to be more correct, so that as the light is scattered out of the volume, there is less remaining to penetrate through.
Since this behaviour is very similar to absorption but more useful, absorption has been removed and has been replaced by a 'transmission colour' - controlling the colour of light penetrating through the volume after it has been scattered/absorbed. As well as this, there's now 'reflection', a non-physically correct RGB multiplier for out-scattered light. This is handy for tweaking the overall colour of the volume, without having to worry about wavelength dependent absorption, and its effects on transmitted light. Now at least, even though there is the ability to tweak things non-physically, volume shading is physically based by default, and has a better combination of correctness and ease of use.
There's more detailed information and example images here:
http://wiki.blender.org/index.php/User:Broken/VolumeRendering
Also did some tweaks/optimisation:
* Removed shading step size (was a bit annoying, if it comes back, it will be in a different form)
* Removed phase function options, now just one asymmetry slider controls the range between back-scattering, isotropic scattering, and forward scattering. (note, more extreme values gives artifacts with light cache, will fix...)
* Disabled the extra 'bounce lights' from the preview render for volumes, speeds updates significantly
* Enabled voxeldata texture in preview render
* Fixed volume shadows (they were too dark, fixed by avoiding using the shadfac/AddAlphaLight stuff)
More revisions to come later...
#19345: can't get out of grayed out pointer field.
#19342: item_pointerR fields can't be cleared with one item.
#19341: fix hanging tooltips when manipulating regions.
#19339: context panel still allowed tabbing, but it has no header.
#19334: editing SSS settings crashed previewrender.
#19330: object mode could not be switched on from the header menu.
