This patch adds support for PBVH drawing in EEVEE.
Notes:
# PBVH_FACES only. For Multires we'll need an API to get/cache attributes. DynTopo support will be merged in later with sculpt-dev's DynTopo implementation.
# Supports vertex color and UV attributes only; other types can be added fairly easily though.
# Workbench only sends the active vertex color and UV layers to the GPU.
# Added a new draw engine API method, DRW_cdlayer_attr_aliases_add. Please review.
# The vertex format object is now stored in the pbvh.
Reviewed By: Clément Foucault & Brecht Van Lommel & Jeroen Bakker
Differential Revision: https://developer.blender.org/D13897
Ref D13897
This adds support to render Curves attributes in EEVEE.
Each attribute is stored in a texture derived from a VBO. As the
shading group needs the textures to be valid upon creation, the
attributes are created and setup during its very creation, instead
of doing it lazily via create_requested which we cannot rely on
anyway as contrary to the mesh batch, we do cannot really tell if
attributes need to be updated or else via some `DRW_batch_requested`.
Since point attributes need refinement, and since attributes are all
cast to vec4/float4 to account for differences in type conversions
between Blender and OpenGL, the refinement shader for points is
used as is. The point attributes are stored for each subdivision level
in CurvesEvalFinalCache. Each subdivision level also keeps track of the
attributes already in use so they are properly updated when needed.
Some basic garbage collection was added similar to what is done
for meshes: if the attributes used over time have been different
from the currently used attributes for too long, then the buffers
are freed, ensuring that stale attributesare removed.
This adds `CurvesInfos` to the shader creation info, which stores
the scope in which the attributes are defined. Scopes are stored
as booleans, in an array indexed by attribute loading order which
is also the order in which the attributes were added to the material.
A mapping is necessary between the indices used for the scoping, and
the ones used in the Curves cache, as this may contain stale
attributes which have not been garbage collected yet.
Common utilities with the mesh code for handling requested
attributes were moved to a separate file.
Differential Revision: https://developer.blender.org/D14916
This commit introduce back support for all geometry types and all nodetree support.
Only the forward shading pipeline is implemented for now.
Vertex Displacement is automatically enabled for now.
Lighting & Shading is placeholder.
Related Task: T93220
# Conflicts:
# source/blender/draw/engines/eevee_next/eevee_engine.cc
# source/blender/gpu/CMakeLists.txt
In the current code we do not render any curves if they have not been
converted to meshes. This change makes the custom bone drawing try to
render mesh objects first and then falls back to curve objects if there
is no mesh data available.
Reviewed By: Clement
Differential Revision: http://developer.blender.org/D14804
This adds support to show dots for the curves points when in edit mode,
using a specific overlay.
This also adds `DRW_curves_batch_cache_create_requested` which for now
only creates the point buffer for the newly added `edit_points` batch.
In the future, this will also handle other edit mode overlays, and
probably also replace the current curves batch cache creation.
Maniphest Tasks: T95770
Differential Revision: https://developer.blender.org/D14262
This commit furthers some of the changes that were started in
rBb9febb54a492 and subsequent commits by changing the way surface
objects are presented to render engines and other users of evaluated
objects in the same way. Instead of presenting evaluated surface objects
as an `OB_SURF` object with an evaluated mesh, `OB_SURF` objects
can now have an evaluated geometry set, which uses the same system
as other object types to deal with multi-type evaluated data.
This clarification makes it more obvious that lots of code that dealt
with the `DispList` type isn't used. It wasn't before either, now it's
just *by design*. Over 1100 lines can be removed. The legacy curve
draw cache code is much simpler now too. The idea behind the further
removal of `DispList` is that it's better to focus optimization efforts
on a single mesh data structure.
One expected functional change is that the evaluated mesh from surface
objects can now be used in geometry nodes with the object info node.
Cycles and the OBJ IO tests had to be tweaked to avoid using evaluated
surface objects instead of the newly exposed mesh objects.
Differential Revision: https://developer.blender.org/D14550
- Metal uniform array compatibility in DRW module.
- Guard OpenGL-specific workarounds and flushes behind GPU_type_matches_ex API guard. Add further render boundaries for render paths called outside of the main loop.
Authored by Apple: Michael Parkin-White
Ref: T96261
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D14438
This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
The evaluated mesh is a result of evaluated modifiers, and referencing
other evaluated IDs such as materials.
It can not be stored in the EditMesh structure which is intended to be
re-used by many areas. Such sharing was causing ownership errors causing
bugs like
T93855: Cycles crash with edit mode and simultaneous viewport and final render
The proposed solution is to store the evaluated edit mesh and its cage in
the object's runtime field. The motivation goes as following:
- It allows to avoid ownership problems like the ones in the linked report.
- Object level is chosen over mesh level is because the evaluated mesh
is affected by modifiers, which are on the object level.
This patch allows to have modifier stack of an object which shares mesh with
an object which is in edit mode to be properly taken into account (before
the change the modifier stack from the active object will be used for all
objects which share the mesh).
There is a change in the way how copy-on-write is handled in the edit mode to
allow proper state update when changing active scene (or having two windows
with different scenes). Previously, the copt-on-write would have been ignored
by skipping tagging CoW component. Now it is ignored from within the CoW
operation callback. This allows to update edit pointers for objects which are
not from the current depsgraph and where the edit_mesh was never assigned in
the case when the depsgraph was evaluated prior the active depsgraph.
There is no user level changes changes expected with the CoW handling changes:
should not affect on neither performance, nor memory consumption.
Tested scenarios:
- Various modifiers configurations of objects sharing mesh and be part of the
same scene.
- Steps from the reports: T93855, T82952, T77359
This also fixes T76609, T72733 and perhaps other reports.
Differential Revision: https://developer.blender.org/D13824
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
The problem is that drw_batch_cache_generate_requested_delayed
is called on the object, which uses the original object data type to
choose which data type to get info for. So for curves and text it uses
the incorrect type (not the evaluated mesh like we hardcoded in the
armature overlay code).
To fix this I hardcoded the "delayed" generation to only use the
evaluated mesh. Luckily it wasn't use elsewhere besides this
armature overlay system. That seems like the simplest fix for
3.0. A proper solution should rewrite this whole area anyway.
Differential Revision: https://developer.blender.org/D13439
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
This adds high quality normals for non meshes. These include
* Volumetric Object Wireframe
* Metaballs
* Extracted Curves
* Curves in edit mode
This is in preparation to fix a regression in recent AMD
drivers where the `GL_INT_2_10_10_10_REV` data type isn't
working in Polaris cards.
HDRI preview should have resolution dependent on dpi, viewport scale and HDRI gizmo size.
This patch uses a LOD to render a more round sphere.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D9382
Previously, one could only select a volume object in the outliner
or by clicking on the object origin. This patch allows you to click
on the actual volume.
Furthermore, the generated (invisible) mesh that is used for
selection is also used to draw an outline for the volume object now.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9022
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/draw` module. Not all warnings are addressed
in this commit.
No functional changes.
Also includes outline overlays. Removes the temp overlay drawing
We make the geometry follow camera like billboards this uses less
geometry. Currently we use half octahedron for now. Goal would be
to use icospheres.
This patch also optimize the case when pointcloud has uniform radius.
However we should premultiply the radius prop by the default radius
beforehand to avoid a multiplication on CPU.
Using geometry instead of pseudo raytraced spheres is more scalable as
we can render as low as 1 or 2 triangle to a full half sphere and can
integrate easily in the render pipeline using a low amount of code.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D8301
Sculpt Vertex Colors is a painting system that runs inside sculpt mode, reusing all its tools and optimizations. This provides much better performance, easier to maintain code and more advanced features (new brush engine, filters, symmetry options, masks and face sets compatibility...). This is also the initial step for future features like vertex painting in Multires and brushes that can sculpt and paint at the same time.
This commit includes:
- SCULPT_UNDO_COLOR for undo support in sculpt mode
- SCULPT_UPDATE_COLOR and PBVH flags and rendering
- Sculpt Color API functions
- Sculpt capability for sculpt tools (only enabled in the Paint Brush for now)
- Rendering support in workbench (default to Sculpt Vertex Colors except in Vertex Paint)
- Conversion operator between MPropCol (Sculpt Vertex Colors) and MLoopCol (Vertex Paint)
- Remesher reprojection in the Voxel Remehser
- Paint Brush and Smear Brush with color smoothing in alt-smooth mode
- Parameters for the new brush engine (density, opacity, flow, wet paint mixing, tip scale) implemented in Sculpt Vertex Colors
- Color Filter
- Color picker (uses S shortcut, replaces smooth)
- Color selector in the top bar
Reviewed By: brecht
Maniphest Tasks: T72866
Differential Revision: https://developer.blender.org/D5975
This adds object motion blur vectors for EEVEE as well as better noise
reduction for it.
For TAA reprojection we just compute the motion vector on the fly based on
camera motion and depth buffer. This makes possible to store another motion
vector only for the blurring which is not useful for TAA history fetching.
Motion Data is saved per object & per geometry if using deformation blur.
We support deformation motion blur by saving previous VBO and modifying the
actual GPUBatch for the geometry to include theses VBOs.
We store Previous and Next frame motion in the same motion vector buffer
(RG for prev and BA for next). This makes non linear motion blur (like
rotating objects) less prone to outward/inward blur.
We also improve the motion blur post process to expand outside the objects
border. We use a tile base approach and the max size of the blur is set via
a new render setting.
We use a background reconstruction method that needs another setting
(Background Separation).
Sampling is done using a fixed 8 dithered samples per direction. The final
render samples will clear the noise like other stochastic effects.
One caveat is that hair particles are not yet supported. Support will
come in another patch.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D7297
The memory leak is noticeable when using custom bone shapes. When using custom
bone shapes objects could be extracted twice. Where the second extraction can
overwrite data created by the first extraction what causes the memory leak.
Options that have been checked:
1. Use two task graphs phases. One for normal extraction (DST.task_graph) and
the other one will handle extractions that require blocking threads.
2. Keep a list of all objects that needs extraction and only start extraction
when all objects have been populated.
The second would slow performance as the extraction only happens when all
objects have been populated. In the future we might want to go for the second
option when we have the capability to render multiple viewports with a single
populate. As this design isn't clear this patch will implement the first
option.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7969
This patch uses a graph flow scheduler for creating all mesh batches.
On a Ryzen 1700 the framerate of Spring/020_02A.anim.blend went from 10 fps to 11.5 fps.
For each mesh where batches needs to be updated a sub-graph will be added to the task_graph.
This sub-graph starts with an extract_render_data_node. This fills/converts the required data
from Mesh.
Small extractions and extractions that can't be multi-threaded are grouped in a single
`extract_single_threaded_task_node`.
Other extractions will create a node for each loop exceeding 4096 items. these nodes are
linked to the `user_data_init_task_node`. the `user_data_init_task_node` prepares the userdata
needed for the extraction based on the data extracted from the mesh.
Note: If the `lines` and `lines_loose` are requested, the `lines_loose` sub-buffer is created
as part of the lines extraction. When the lines_loose is only requested the sub-buffer is
created from the existing `lines` buffer. It is assumed that the lines buffer is always
requested before or together with the lines_loose what is always the case (see
`DRW_batch_requested(cache->batch.loose_edges, GPU_PRIM_LINES)` in `draw_cache_impl_mesh.c`).
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7618
Only the volume drawing part is really finished and exposed to the user. Hair
plugs into the existing hair rendering code and is fairly straightforward. The
pointcloud drawing is a hack using overlays rather than Eevee and workbench.
The most tricky part for volume rendering is the case where each volume grid
has a different transform, which requires an additional matrix in the shader
and non-trivial logic in Eevee volume drawing. In the common case were all the
transforms match we don't use the additional per-grid matrix in the shader.
Ref T73201, T68981
Differential Revision: https://developer.blender.org/D6955
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
This previously caused a bug in T74283, that should be fixed now.
Differential Revision: https://developer.blender.org/D6695
This reverts commit f2b95b9eae.
Fix T74283: modifier display lost when moving object in edit mode.
The cause is not immediately obvious so better to revert and look at this
carefully.
This is in preparation of new object types. This only changes mesh_eval, we
may do the same for mesh_deform_eval and other areas in the future if there is
a need for it.
Differential Revision: https://developer.blender.org/D6695
When using duplicate linked meshes, objects that are not in edit-mode will be drawn as
it is in edit mode, when another object with the same mesh is in edit mode.
This will not be the case when one of the objects are influenced by modifiers. The change
reflects more how it was done in Blender 2.79.
The current change introduces a draw manager method that checks in detail who is responsible
for the drawing (render engine or overlay engine). If the edit mesh is not the original or
the object that is drawn doesn't draw the original mesh the object will be drawn by the render
engine.
Known Limitation of this patch is that the rendering outside edit mode doesn't reflect the
latest changes until the user switches between object and edit mode. When there are no
modifiers in use, the updating is done immediately.
IMO this would be sufficient for blender 2.82, it also fixes parts of T72733.
The updating of the surface batches requires more development and is
post-poned for now.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D6737
