Use "filepath" which is the current convention for naming full paths.
- Main use "name" which isn't obviously a file path.
- BlendFileData & FileGlobal used "filename" which is often
used for the name component of a path (without the directory).
Use the World viewport color when rendering pose library previews.
The World's viewport color is chosen instead of the World shading nodes,
as the latter would require rendering with `OB_RENDER` (instead of
`OB_SOLID`), which would take considerably longer.
Manifest Task: T93467
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D13470
Make `ED_preview_id_is_supported(ID *)` NULL-safe. It's semantically
valid, as it's not possible to render a preview of a NULL ID.
The crash was introduced in 481f032f5c
Reviewed By: sybren, jbakker
Maniphest Tasks: T93431
Differential Revision: https://developer.blender.org/D13398
Basically, this fixes disappearing previews when editing asset metadata
or performing undo/redo actions.
The preview generation in a background job will eventually modify ID
data, but the undo push was done prior to that. So obviously, an undo
then would mean the preview is lost.
This patch makes it so undo/redo will regenerate the preview, if the preview
rendering was invoked but not finished in the undone/redone state.
The preview flag PRV_UNFINISHED wasn't entirely what we needed. So I had to
change it to a slightly different flag, with different semantics.
Mistake in e7bea3fb6e.
We should only skip preview generation for objects that don't support
preview rendering, not completely forbid accessing preview data of such
IDs.
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
`BKE_object_material_slot_used` would only check obdata usages, but
particle settings can also (weirdly enough) use objects' material slots.
So now, as its name suggests, `BKE_object_material_slot_used` does take
an object as parameter, and also checks for potential slot usage from
psys in the object.
This includes much improved GPU rendering performance, viewport interactivity,
new shadow catcher, revamped sampling settings, subsurface scattering anisotropy,
new GPU volume sampling, improved PMJ sampling pattern, and more.
Some features have also been removed or changed, breaking backwards compatibility.
Including the removal of the OpenCL backend, for which alternatives are under
development.
Release notes and code docs:
https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Cycleshttps://wiki.blender.org/wiki/Source/Render/Cycles
Credits:
* Sergey Sharybin
* Brecht Van Lommel
* Patrick Mours (OptiX backend)
* Christophe Hery (subsurface scattering anisotropy)
* William Leeson (PMJ sampling pattern)
* Alaska (various fixes and tweaks)
* Thomas Dinges (various fixes)
For the full commit history, see the cycles-x branch. This squashes together
all the changes since intermediate changes would often fail building or tests.
Ref T87839, T87837, T87836
Fixes T90734, T89353, T80267, T80267, T77185, T69800
This patch exposes the Cycles Alembic Procedural through the MeshSequenceCache
modifier in order to use and test it from Blender.
To enable it, one has to switch the render feature set to experimental and
activate the Procedural in the modifier. An Alembic Procedural is then
created for each CacheFile from Blender set to use the Procedural, and each
Blender object having a MeshSequenceCache modifier is added to list of objects
of the right procedural.
The procedural's parameters derive from the CacheFile's properties which are
already exposed in the UI through the modifier, although more Cycles specific
options might be added in the future.
As there is currently no cache controls and since we load all the data at the
beginning of the render session, the procedural is only available during
viewport renders at the moment. When an Alembic procedural is rendered, data
from the archive are not read on the Blender side.
If a Cycles render is not active and the CacheFile is set to use the Cycles Procedural,
bounding boxes are used to display the objects in the scene as a signal that the
objects are not processed by Blender anymore. This is standard in other DCCs.
However this does not reduce the memory usage from Blender as the Alembic data
was already loaded either during an import or during a .blend file read.
This is mostly a hack to test the Cycles Alembic procedural until we have a
better Blender side mechanism for letting renderers load their own geometry,
which will be based on import and export settings on Collections (T68933).
Ref T79174, D3089
Reviewed By: brecht, sybren
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D10197
This addresses reduced visibility of scenes (as displayed in the VR
headset) that can result from the 8-bit color depth format currently
used for XR swapchain images.
By switching to a swapchain format with higher color depth (RGB10_A2,
RGBA16, RGBA16F) for supported runtimes, visibility in VR should be
noticeably improved.
However, current limitations are lack of support for these higher
color depth formats by some XR runtimes, especially for OpenGL.
Also important to note that GPU_offscreen_create() now explicitly
takes in the texture format (eGPUTextureFormat) instead of a
"high_bitdepth" boolean.
Reviewed By: Julian Eisel, Clément Foucault
Differential Revision: http://developer.blender.org/D9842
Before this commit rendering material icons the floor will is hidden.
This reduces the readability of reflective/refractive materials.
check patch for additional screenshots and notes.
This patch will switch the floor material that uses ray visibility tricks to render a floor for reflective rays.
Eevee uses screen space reflections that makes this a different problem. There is nothing else drawn in
the scene in screen space so we need a different trick. Using math we convert a reflective ray to UV space
and generate a world that projects a checker pattern to infinity.
As now the floor is in the world it is being reflected via
a cubemap. As the film is transparent the background (including the floor isn't rendered)
In the future when Eevee supports vulkan raytracing we can re-evaluate and perhaps remove this
approximation.
We tried lightprobes but that wasn't able to do the trick.
Using the compositor would lead to more memory usage (render layers and intermediate buffers) and slower performance.
Solution has been validated with Simon
Reviewed By: sybren, Severin
Differential Revision: https://developer.blender.org/D11988
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
The preview was always using frame 1, but maybe the object has changed and it's better create preview using the current frame.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12018
Scaling down images could create images with a width or height of zero.
Clamp at 1 to prevent a crash, also add an assert to scaling functions.
Ref D11956
The `action_preview_render()` function used to just render, but now it
also temporarily applies the pose. Its comment is now updated for this.
No functional changes.
When generating a preview image for a pose, temporarily apply it to the
armature. Contrary to the usual pose application, this ignores the
selected bones and always applies the entire pose.
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
After looking into task isolation issues with Sergey, we couldn't find the
reason behind the deadlocks that we are getting in T87938 and a Sprite Fright
file involving motion blur renders.
There is no apparent place where we adding or waiting on tasks in a task group
from different isolation regions, which is what is known to cause problems. Yet
it still hangs. Either we do not understand some limitation of TBB isolation,
or there is a bug in TBB, but we could not figure it out.
Instead the idea is to use isolation only where we know we need it: when
holding a mutex lock and then doing some multithreaded operation within that
locked region. Three places where we do this now:
* Generated images
* Cached BVH tree building
* OpenVDB lazy grid loading
Compared to the more automatic approach previously used, there is the downside
that it is easy to miss places where we need isolation. Yet doing it more
automatically is also causing unexpected issue and bugs that we found no
solution for, so this seems better.
Patch implemented by Sergey and me.
Differential Revision: https://developer.blender.org/D11603
This patch makes the "Render" window a top-level window, not a child of
the main window, which was the case in blender versions prior to 2.93.
This means it is no longer "on top", nor is the icon grouped on the
taskbar in the same way, but you can Alt-Tab between it and the main
window. This change only affects the Windows platform as the other
platforms behave this way.
See D11576 for links to negative feedback that prompts this change.
Differential Revision: https://developer.blender.org/D11576
Reviewed by Brecht Van Lommel
Note that these changes are limited simple cases as these kinds of
changes could allow for errors when refactoring code when the known
state is not so obvious.
Under some circumstances using task isolation can cause deadlocks.
Previously, our task pool implementation would run all tasks in an
isolated region. Now using task isolation is optional and can be
turned on/off for individual task pools.
Task pools that spawn new tasks recursively should never enable
task isolation. There is a new check that finds these cases at runtime.
Right now this check is disabled, so that this commit is a pure refactor.
It will be enabled in an upcoming commit.
This fixes T88598.
Differential Revision: https://developer.blender.org/D11415
Textures may be important to be able to identify an object. They are also a way
to make many objects look more like when rendered with an advanced render
engine, without being that expensive.
So this seems like a simple way to increase usefulness of the automatic
previews.
Object orientation for thumbnail creation changed to be slightly
oblique (tilted to one side and from above) to better show shape,
especially when axis-aligned. Camera lens changed to 85 to avoid
distortion of close objects like human heads.
see D9940 for details and examples.
Differential Revision: https://developer.blender.org/D9940
Reviewed by Julian Eisel
Pass `bContext *C` a bit further down the call stack, to prevent
exploding the number of parameters of `ED_preview_icon_render()`. An
upcoming change will require access to yet another context member, and
this can now be done without adding yet another parameter.
No functional changes.
