Unfortunately the drop logic for file-path based drag & drop checks the
used icon for its logic. This is very bad and should be changed. But
doing this involves some changes that are better not done during bcon4,
so for now stick to it and update the icon check.
Reviewed by: Julian Eisel
Differential Revision: https://developer.blender.org/D13383?id=45314
We already show a message when showing an asset library whose path can't be
found on disk. The red text was making it look like some fatal error happened.
And the message could be a bit more useful generally.
So this removes the red color of the text, (arguably) improves the text and
adds a button as shortcut to open the Preferences with the asset library
settings.
Differential Revision: https://developer.blender.org/D12894
Renames the operator from "Show Preferences" to "Open Preferences...". "Open"
is more clear than "Show" (since they could be shown in-place). "..." is
usually used in Blender to indicate that a new Window or popup will be opened.
Note that vanilla Blender doesn't actually show this name anywhere, so this
change shouldn't be visible. That may change, see D12894.
When dragging an object in non-object mode into a 3D View, there will now be
red text explaining that this is only possible in object mode.
The previous commit enabled this.
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Missed in rB69102786047dccdcbaee0df6307a8c3364d28fe0.
This change simplifies the parameter list for these functions
and reduces the chance of typos mixing up array indices.
Reviewed By: campbellbarton
Ref D12950
Use arrays for wmEvent coordinates, this quiets warnings with GCC11.
- `x, y` -> `xy`.
- `prevx, prevy` -> `prev_xy`.
- `prevclickx, prevclicky` -> `prev_click_xy`.
There is still some cleanup such as using `copy_v2_v2_int()`,
this can be done separately.
Reviewed By: campbellbarton, Severin
Ref D12901
While the screenshot operator showed an "Area" option,
it wasn't usable from the main menu (unless accessed via menu search).
Split screenshot area into an operator that depends on cursor.
Change data structure of keylists. Reducing the balancing overhead and therefore increases performance.
| **Function** | **Master** | **Patch** |
|`draw_summary_channel`| 0.202105s| 0.083874s |
When adding items to the keylist it will store it in a linked list. This linked list is
accompanied with the length (key_len) and a `last_accessed_column`. last_accessed_column is a cursor
that improve the performance when adding new items as they are mostly ordered by frame numbers.
last_accessed_column is reset when a new fcurve/mask/... is added to the keylist.
Before searching or array access. the listbase needs to be converted to an array.
`ED_keylist_prepare_for_direct_access`. After that the caller can use
`ED_keylist_find_*` or `ED_keylist_array*` functions.
The internal array can also be accessed via the `ED_keylist_listbase` function.
The items inside the array link to the previous/next item in the list.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12052
This patch just changes the mouse cursor to a "stop sign" when dragging
to an unsupported location during Join or Split operations.
See D11396 for details and examples.
Differential Revision: https://developer.blender.org/D11396
Reviewed by Campbell Barton
Screen area maintenance "Close" function allowed to be scripted.
See D12307 for usage example.
Differential Revision: https://developer.blender.org/D12307
Reviewed by Campbell Barton
Change Area Move snapping locations to even 12ths, rather than current
eights and thirds, so snap distances are consistent sizes. Also adds
snapping at minimum and maximum locations.
see D11938 for details and illustrations.
Differential Revision: https://developer.blender.org/D11938
Reviewed by Hans Goudey
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
For T78995 we want to change the data structure of keylists to
improve performance. (Probably a Vector with bin-search capabilities).
This patch hides the internal structure of the keylists behind `AnimKeylist`
structure. This allows us to change the internals without 'breaking' where it is
being used.
The change adds functions to create, free, find and walk over the
keylist.
Reviewed By: sybren
Maniphest Tasks: T78995
Differential Revision: https://developer.blender.org/D11974
Caused by {rBbbb2e0614fc3}
Since above commit only the playhead is updated as an overlay in
animation playback (was moved out of drawing of the main region for
perfomance reasons).
The driver value "debug" visualization is very useful to have during
playback though but was left in main region drawing as part of
`draw_fcurve` (thus does not update in realtime anymore).
Moving `graph_draw_driver_debug` into the overlay is not feasible
because it requires animation filtering which has significant overhead
which needs to be avoided in the overlay which is redrawn on every UI
interaction.
Now tag the whole main region for updates in the Driver Editor during
playback instead (which will make the Drivers Editor as slow during
playback as before rBbbb2e0614fc3 -- but with realtime updates of the
debug visualization).
Maniphest Tasks: T87041
Differential Revision: https://developer.blender.org/D12003
Originally the operator name was drawn next to the dragging content.
After that there was an option to add custom, static text with the
dragging content. This patch allows dynamic text to be drawn.
The custom text was implemented as out parameter of the poll function
what made the code unclear. This patch introduces a tooltip function
that separates tooltip generation from the poll function.
NOTE: the text should always be returned in its own memory block. This
block will be freed after it is copied in the drag struct.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12104
These operators shouldn't be available in the Asset Browser.
https://developer.blender.org/T83556
Added a comment to each operator poll assignment to explicitly mention
the intention. That should also remind devs to decide if the operator
should apply for both file & asset browsing when copy & pasting operator
definition code.
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
Mainly:
* Make `ED_operator_object_active_editable_ex` properly report poll
messages on failure.
* Add `ED_operator_object_active_local_editable_posemode_exclusive` for
bone constraints requiring pure local Object (non-override one).
* General cleanup and adding more poll messages on failures.
This patch makes the "Render" window a top-level window, not a child of
the main window, which was the case in blender versions prior to 2.93.
This means it is no longer "on top", nor is the icon grouped on the
taskbar in the same way, but you can Alt-Tab between it and the main
window. This change only affects the Windows platform as the other
platforms behave this way.
See D11576 for links to negative feedback that prompts this change.
Differential Revision: https://developer.blender.org/D11576
Reviewed by Brecht Van Lommel
When using large sequences including audio the drawing of the audio on
top of the strip takes a lot of time. This effects the playback
performance heavily.
During the animation playback performance there was a solution for this
by only drawing the playhead overlay. This was reverted for the sequence
editor as it didn't update the color strips when they were animated.
This patch checks if there are animated color strips if so the full
screen is redrawn, otherwise only the playhead is redrawn.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D11580
The term direction was used in 3 different ways in screen editing code,
making it hard to follow:
- 0-3 for as magic numbers mapped to [west,north,east,south].
- `h`, `v` characters for [horizontal,vertical] axes.
- Cycle direction SPACE_CONTEXT_CYCLE_PREV, SPACE_CONTEXT_CYCLE_NEXT
The following changes have been made:
- Add `eScreenDir` for [west,north,east,south], use variable name `dir`.
- Add `eScreenAxis` for [horizontal,vertical] values, use variable name
`dir_axis`.
- Add `eScreenCycle` for existing enum `SPACE_CONTEXT_CYCLE_{PREV/NEXT}`.
- Add macros `SCREEN_DIR_IS_VERTICAL(dir)`,
`SCREEN_DIR_IS_HORIZONTAL(dir)`.
Replacing `ELEM(dir, 1, 3)`, `ELEM(dir, 0, 2)`.
- Move `ED_screen_draw_join_highlight`, `ED_screen_draw_split_preview`
to `screen_intern.h`.
Reviewed By: Severin
Ref D11245
Removing mid-operation area re-targeting for safety and predictability.
Differential Revision: https://developer.blender.org/D11066
Reviewed by Campbell Barton
The RGN_TYPE_EXECUTE region was zero height - with the "Load & Save"
button drawing outside of those bounds - so it didn't respond to events.
This is because the region started off this size and does not change
with simply adding the buttons. Although it has RGN_FLAG_DYNAMIC_SIZE,
delayed reinit of regions is only currently supported on headers.
This gives the execute region an initial (minimum) vertical size but
also makes the region **hidden** by default.
- Showing Prefs as an editor among others it will show the header
but not the execute region.
- Showing the Prefs in a popup window, hides the header region
and shows the execute region.
Ref D10636
Refactoring: WM_window_open() that can open different types of windows. 'New Window' with simplified layout.
Differential Revision: https://developer.blender.org/D10419
Reviewed by Brecht Van Lommel
When dropping an asset somewhere, it is appended and then a drop operation is
called to actually add it to the scene based on current context. If this drop
operation fails, the appended data-block is now still in the .blend. The user
may not notice and not expect this.
Instead idea is to rollback any changes done by dropping code if the operation
fails, namely removing the appended data-block again.
Adds a new `cancel()` callback which is called if the drop operator returns
`OPERATOR_CANCELLED` to drop-boxes and a generic function to deal with assets
on drop failure.
Also removes the `free_id_on_error` property of the `NODE_OT_add_group`
operator, which was used as ad-hoc solution to get this same behavior.
There should be a conversion to native pixel size as expected by GHOST at the
window manager level, the dimensions at screen level do not need a conversion.
Differential Revision: https://developer.blender.org/D9976
Approximately 138 changes in the spelling of compound words
and proper names like "Light Probe", "Shrink/Fatten", "Face Map".
In many cases, hyphens were used where they aren't correct, like
"re-fit". Other common changes include:
- "Datablock" -> "data-block"
- "Floating point" -> "floating-point"
- "Ngons" -> "n-gons"
These changes help give the language used in the interface
a consistent, more professional feel.
Differential Revision: https://developer.blender.org/D9923
