Main reason for doing this is that the navigation buttons are very
close to the file list now, making them much faster to reach.
Initially we let the upper bar (the one with the file path, navigation
and display buttons) use full area width, because designs back then had
more horizontal space problems. The designs have changed meanwhile, and
horizontal space is less of an issue.
However, when the file browser is shrunk horizontally, or if it's open
in a small area (e.g. see "Shading" workspace), having the tool region
open brings back the space issues. But even the file list layout becomes
problematic then, and the same issue was present before the new file
browser design, so we've decided this is an acceptable tradeoff.
The big options button in the lower left is now gone, it's replaced by a
smaller icon toggle button in the upper right.
That means I could also remove code for the region we had just for this
button.
I also added versioning code for the removal, to make sure the region is
removed cleanly when reading old files.
So far the file browser code had some lazy creation for the tool region,
even though it should always be there. The only reason I can see for
this is compatiblity. So I simply added versioning code to add the
region in case it's not there. Now we should be able to savely assume
the tool region to be there, whithout any unusual lazy-creation.
This makes it so that regions only needed when the file browser is
invoked as an operation (e.g. Ctrl+O rather than a regular editor) are
lazy created then, and removed if the file browser is changed into a
regular editor then (e.g. Ctrl+O over regular file browser editor ->
Cancel).
That should remove some troublesome assumptions and makes versioning
redundant.
It also fixes the issue of an empty execute region at the bottom after
cancelling a file operation invoked from a regular file browser editor.
I'm not sure how a .blend file could get into this state, but apparently
for some files saved with versions of Blender after the file browser
changes, the execute region would not have been created. File browser
code assumes this region to be there however.
Luckily I found a file with which I could recreate the issue. My guess
is that the error only happens with files that were stored before
certain versioning fixes were done after the file browser redesign.
To fix this, we just let the versioning code for the execute region run
even with newest files. We can run this safely, it only acts if the
execute region actually doesn't exist.
Support per-viewport collection visibility options.
Note 1: There is no way to show a collection that was not visible before
due to depsgraph. Otherwise we would risk having all the collections in
the depsgraph and I believe this is not the idea.
An alternative would be to have a new depsgraph for viewports that are
not local. Something to keep in mind if we do per-viewport current frame
in the future.
So for now what we do is to only allow collections visibility to be
disabled/hidden in this mode.
Note 2: hide_viewport (the eye icon) doesn't really matter for
depsgraph. So after the merge we can still ignore it to show the
collections locally in a viewport with no problems for the depsgraph.
Reviewers: brecht, sergey
Subscribers: billreynish
Related task: T61327
Differential Revision: https://developer.blender.org/D5611
When reading a old .blend file (from before the new file browser
design), we wouldn't create the execute region for existing file
editors. This usually wasn't an issue, but it could become one when a
file browser was opened in a temporary screen before, and that screen
was still visible. Then code spawning the new file browser would re-use
the old file browser data, assuming the execute region was there.
Handle this in versioning code and let rest of the code keep sane
assumtions (e.g. that there always is a execute region, even if
invisible).
This patch implements the paper "Regularized Kelvinlets: Sculpting Brushes based on Fundamental Solutions of Elasticity" https://graphics.pixar.com/library/Kelvinlets/paper.pdf
It includes grab, biscale grab, triscale grab, scale and twist.
All deformation modes are accessible under the same tool. This helps to keep the code organized and it should not make any difference to the user when a better brush management system is implemented.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5634
Add option to change the Intensity of the HDRI in the 3d viewport. This works for both EEVEE and Cycles
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5674
Upon close inspection, the way the Offset mode works in the
Copy Rotation constraint makes no sense, and in fact, destroys
the rotation of its owner unless either it's single axis, or
the order is set specifically to `ZYX Euler`.
Since it can't simply be changed because of backward compatibility
concerns, replace the checkbox with a dropdown that provides a set
of new modes that actually make sense.
Specifically, add a mode that simply adds Euler components together,
and two options that use matrix multiplication in different order.
The Python use_offset property is replaced with compatibility stubs.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5640
This change implements the basics as described in {T68312} for the
shading modes.
* LookDev shading mode is renamed to Material Preview. It always uses Eevee as renderer, and is intended to provide a fast material preview suitable for texture painting, and texture and material setup.
* Rendered shading gains "Use Scene Lights" and "Use Scene World" options similar to current Material Preview. These will be enabled by default. When Use Scene World is turned off, HDRIs will be used for lighting instead. These options are available for EEVEE and Cycles.
* Renderers will be able to customize the shading settings panel and add additional settings.
Reviewed By: brecht, fclem
Differential Revision: https://developer.blender.org/D5612
As an inherent property of matrix-based transformation math, non-
uniform scaling of a parent bone induces shear into the transform
matrix of any rotated child. Such matrices cannot be cleanly
decomposed into a combination of location/rotation/scale, which
causes issues for rigging and animation tools.
Blender bones have options to exclude rotation and/or scale from the
inherited transformation, but don't have any support for removing the
often undesired shear component. That goal requires replacing simple
parenting with a combination of multiple bones and constraints. The
same is true about the goal of inheriting some scale, but completely
avoiding shear.
This patch replaces the old Inherit Scale checkbox with a enum that
supports multiple options:
* Full: inherit all effects of scale, like with enabled Inherit Scale.
* Fix Shear: removes shear from the final inherited transformation.
The cleanup math is specifically designed to preserve the main
axis of the bone, its length and total volume, and minimally
affect roll on average. It however will not prevent reappearance
of shear due to local rotation of the child or its children.
* Average: inherit uniform scale that represents the parent volume.
This is the simplest foolproof solution that will inherit some
scale without ever causing shear.
* None: completely remove scale and shear.
* None (Legacy): old disabled Inherit Scale checkbox.
This mode does not handle parent shear in any way, so the child
is likely to end up having both scale and shear. It is retained
for backward compatibility.
Since many rigging-related addons access the use_inherit_scale
property from Python, it is retained as a backward compatibility
stub that provides the old functionality.
As a side effect of reworking the code, this also fixes a matrix
multiplication order bug in the Inherit Rotation code, which caused
the parent local scale to be applied in world space. In rigger
opinion this option is useless in production rigs, so this fix
should not be a problem.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D5588
This is a general redesign of the File Browser GUI and interaction
methods. For screenshots, check patch D5601.
Main changes in short:
* File Browser as floating window
* New layout of regions
* Popovers for view and filter options
* Vertical list view with interactive column header
* New and updated icons
* Keymap consistency fixes
* Many tweaks and fixes to the drawing of views
----
General:
* The file browser now opens as temporary floating window. It closes on
Esc. The header is hidden then.
* When the file browser is opened as regular editor, the header remains
visible.
* All file browser regions are now defined in Python (the button
layout).
* Adjusted related operator UI names.
Keymap:
Keymap is now consistent with other list-based views in Blender, such as
the Outliner.
* Left click to select, double-click to open
* Right-click context menus
* Shift-click to fill selection
* Ctrl-click to extend selection
Operator options:
These previously overlapped with the source list, which caused numerous
issues with resizing and presenting many settings in a small panel area.
It was also generally inconsistent with Blender.
* Moved to new sidebar, which can easily be shown or hidden using a
prominent Options toggle.
* IO operators have new layouts to match this new sidebar, using
sub-panels. This will have to be committed separately (Add-on
repository).
* If operators want to show the options by default, they have the option
to do so (see `WM_FILESEL_SHOW_PROPS`, `hide_props_region`), otherwise
they are hidden by default.
General Layout:
The layout has been changed to be simpler, more standard, and fits
better in with Blender 2.8.
* More conventional layout (file path at top, file name at the bottom,
execute/cancel buttons in bottom right).
* Use of popovers to group controls, and allow for more descriptive
naming.
* Search box is always live now, just like Outliner.
Views:
* Date Modified column combines both date and time, also uses user
friendly strings for recent dates (i.e. "Yesterday", "Today").
* Details columns (file size, modification date/time) are now toggleable
for all display types, they are not hardcoded per display type.
* File sizes now show as B, KB, MB, ... rather than B, KiB, MiB, … They
are now also calculated using base 10 of course.
* Option to sort in inverse order.
Vertical List View:
* This view now used a much simpler single vertical list with columns
for information.
* Users can click on the headers of these columns to order by that
category, and click again to reverse the ordering.
Icons:
* Updated icons by Jendrzych, with better centering.
* Files and folders have new icons in Icon view.
* Both files and folders have reworked superimposed icons that show
users the file/folder type.
* 3D file documents correctly use the 3d file icon, which was unused
previously.
* Workspaces now show their icon on Link/Append - also when listed in
the Outliner.
Minor Python-API breakage:
* `bpy.types.FileSelectParams.display_type`: `LIST_SHORT` and
`LIST_LONG` are replaced by `LIST_VERTICAL` and `LIST_HORIZONTAL`.
Removes the feature where directories would automatically be created if
they are entered into the file path text button, but don't exist. We
were not sure if users use it enough to keep it. We can definitely bring
it back.
----
//Combined effort by @billreynish, @harley, @jendrzych, my university
colleague Brian Meisenheimer and myself.//
Differential Revision: https://developer.blender.org/D5601
Reviewers: Brecht, Bastien
Same issue here as with root nodetrees, those are private ID data owned
by another ID, and not in Main DB. This requires special handling.
there are still quiet a few things to do here, like getting rid of
special code for master collection (regular ID copying should handle
that just as it already does for root nodetrees), cleanup in ID copying
code, etc.
This commit includes the new brush cursor, active vertex updates and the normal radius brush property for all sculpt brushes.
-The new brush cursor previews the real stroke radius over the mesh and the sampled sculpt normal.
-The active vertex is used in sculpt tools and brushes as a starting point for an operation, similar to a preselection. It is also mirrored following the enabled symmetry options to preview the stroke symmetry.
-The normal radius brush property limits the radius that is going to be used to sample the sculpt normal and area center. It controls how closely the cursor follows the surface and it improves the behavior of most brushes, making them suitable for hard surface sculpting.
Reviewed By: campbellbarton, brecht
Differential Revision: https://developer.blender.org/D3594
NodeTree structures of materials and some other data blocks are
effectively node group datablock objects that are contained inside
the parent block. Thus, direct references to them are only valid
while blender is running, and are lost on save.
Fix Copy As New Driver to create a reference that goes through
the owner datablock, by adding a new ID flag to mark private
pseudo-datablocks.
Also fix functions that return full paths to structures and
properties, e.g. used in python tooltips. Functions for paths
from ID to struct or property can't be changed because of
Animation Data related code.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D5559
The recent commit of synced selection added an active color theme to
the outliner, and synced selection enabled by default. The subversion
bump was missed.
Move outliner versioning for syncing and themes to the block
for the next subversion bump. It was not moved from the first
location it was placed in the soc-2019-outliner branch.
Old files will now load with synced selection enabled reliably.
Adds a toggle to the filter menu for outliner synced selection. Enabled
by default, this ensures selection is synced between objects, bones, and
sequences. An active outliner element theme color is added to indicate
which element is active.
Synced selection is controlled on the operator level. Each operator
that modifies selection for objects, bones, sequences, or outliner
elements needs to call the respective ED_outliner_select_sync_from..
function to tag outliners to be synced.
Syncing is done lazily on outliner draw.
The voxel remesher introduces a new workflow for sculpting without any of the limitations of Dyntopo (no geometry errors or performance penalty when blocking shapes). It is also useful for simulations and 3D printing.
This commit includes:
- Voxel remesh operator, voxel size mesh property and general remesh flags.
- Paint mask reprojection.
- Geometry undo/redo for sculpt mode. This should support remesh operations as well as future tools that modify the topology of the sculpt in a single step, like trimming tools or mesh insert brushes.
- UI changes in the sculpt topbar and the mesh properties pannel.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D5407
This commit also provide a compatibility code that will convert old
materials using Additive or Multiply Blend mode to their node equivalent.
This conversion is only done on outputs that are enabled for eevee.
When NULL pointer can be a valid return value, one has to use
`do_versions_find_region_or_null()` instead...
Fixes asserts as reported in rBa2fe386153e.
Tweak Text Editor to fit better with the rest of Blender 2.8:
- Move sidebar to the right
- Add proper context menu
- Move view toggles to the View menu
- Change the indentation option to be an enum between spaces and tabs
- Several layout tweaks
Patch by @tintwotin / Peter Fog with additional tweaks by me.
Differential Revision https://developer.blender.org/D5028
Reviewers: Brecht, Campbell
Added because the current default is too fast
for painting with tablets, see D5385.
Turntable and trackball have different settings because
turn-table uses an angle-per-pixel, where as trackball
values are relative to the view-port size so a scale is used.
The sensitivity is scaled by the pixel size so hi-dpi views don't rotate faster.
We need a final subversion bump before release in case there are
remaining 'unversioned' code in our versionning callbacks...
Should have been done before first RC actually. ;)
To be ported to 2.80 release branch.
Second completely unrelated issue reported in same task (tssst...),
caused by missing doversion code of some changes in recent-ish 2.80
development (tsst... again).
Proper fix for the issue (reverted rB8a5a8282ce48 was merely sweeping
the dirt under the carpet...).
CDData checking on file load was not taking into account deprecated
CD_MTEXPOLY datatype, which unfortunately shows same weird glitch as
CD_PAINT_MASK and CD_FACEMAP ones...
Note that it was annoying (due to amount of warnings in console), but
totally harmless, since that data type is just deleted anyway.
This commit also generally cleans up the CD_MTEXPOLY deprecation code, we
have a system to handle that, let's use it, instead of defining local
static values to replace it...
This option can not be supported by a new granular dependency graph,
and, especially, copy-on-write.
It was always doing full update ever since initial commit of new dependency
graph which we are using here in the studio for the past years and lack of
this option was never brought up.
Fixes T65557: Delay refresh option in armatures is broken
Regression introduced by rB7fe3d1e7d718 (fixing T57934).
This effectively reverts rBrB7fe3d1e7d718, since changing the type of an
object is a very bad idea in general, and would need a careful and
complex check of all of its usages (many object usages assume a specific
type of object...).
Instead, we simply remove duplicollection on those objects, and give a
warning in case dupligroup was effectively used (in many reported cases,
dupligroup was a 'mistake setting', without actually instancing
aniything).
Note that the otehr idea to fix that versioning issue (to create a new
empty object for the instancing) is much less easy than it might look
(one would need to take into account potential animations, relations
between objects, etc.). Doable probably, but way overkill for a
corner-case 'bad' usage of the feature in the first place.
Users could change the master collection flags, but they should not.
That would not effectively affect the master collection objects
(depsgraph flag evaluation ignores master collection flags).
However we use the layer collection flags of the parent collection when creating
a new child collection.
We *could* solve this differently by creating a new RNA type for the
master collection (and layer collection) and hook this with rna refine.
But this patch seems to work well enough and it is simpler.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4981
