These changes only have an effect when the experimental Undo Speedup preference
is enabled.
* For DEG_id_tag_update, accumulate recalc flags immediately before the undo
push happens instead of afterwards. Otherwise the undo state does not
contain enough flags, and the current state may contain too many flags.
This also means we call DEG_id_tag_update after undo with the accumulated
flags to ensure they are flushed to other datablocks.
* For undo, accumulate recalc flags in id->recalc and clear accumulated flags
immediately. Not clearing would cause circular behavior where accumulated
flags may never end up being cleared.
This matches what happens after an undo push where these are also cleared,
indicating that the undo state and current in-memory state match exactly.
* Don't change id->recalc of identical datablocks, it should not be needed.
There is one exception for armatures where pointers across datablocks
exist which otherwise would cause problems. There may be a better solution
to this but it seems to work in agent 327 production files.
* This contains a change in undofile.c to avoid detecting all datablocks as
changed for the first of the two undo steps, where we restore to the state
of the last undo push before going to the one before.
Without this the whole system is much less efficient. However this is unsafe
in the sense that if an app handler or operators edits a datablock after an
undo push, that change will not be undone.
It can be argued that this is acceptable behavior, since a following undo push
will include that change and this may already have unexpected side effects.
Ref T60695
Differential Revision: https://developer.blender.org/D7339
Other types of datablocks pointing to UI datablocks is unsupported, so
there is no need to store them in fd->libmap. With the experimental undo
speedup enabled preserving such pointers was done. But it didn't work in
2.82 and such pointers are easily lost in cases other than undo.
Differential Revision: https://developer.blender.org/D7329
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
There is no guarantee that depsgraph is ran between two undo steps, so
when re-using an existing data-block we should never wipe completly its
recalc flags, but instead complement them with new ones from accumulated
'storage' as needed.
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
Mpving utils from idcode to idtype proved to be somewhat painful for
some reasons, but now all looks good.
Had to add a fake/empty shell for the special snowflake too,
`ID_LINK_PLACEHOLDER/INDEX_ID_NULL`...
Unlike Linux where fseek/tell will be either 32 or 64 bit
depending on the target platform, it will always be 32 bit
on windows.
We had some macro magic in BLI_winstuff.h that substituted
them for 64 bit versions, but that is upsetting the system
headers if they get included after BLI_winstuff.h which
is problematic for D6811.
This diff adds proper functions in blenlib and updates
all calls that were using the BLI_winstuff.h header to
gain 64 bit file IO.
note: Anything that was using the 32 bit versions (ie not
including BLI_winstuff.h) will still be using the 32 bit
versions, which is perhaps a good code quality Friday project.
Differential Revision: https://developer.blender.org/D7160
Reviewers: brecht dfelinto
NOTE: While most of the milestone 1 goals are there, a few smaller features and
improvements are still to be done.
Big picture of this milestone: Initial, OpenXR-based virtual reality support
for users and foundation for advanced use cases.
Maniphest Task: https://developer.blender.org/T71347
The tasks contains more information about this milestone.
To be clear: This is not a feature rich VR implementation, it's focused on the
initial scene inspection use case. We intentionally focused on that, further
features like controller support are part of the next milestone.
- How to use?
Instructions on how to use this are here:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/How_to_Test
These will be updated and moved to a more official place (likely the manual) soon.
Currently Windows Mixed Reality and Oculus devices are usable. Valve/HTC
headsets don't support the OpenXR standard yet and hence, do not work with this
implementation.
---------------
This is the C-side implementation of the features added for initial VR
support as per milestone 1. A "VR Scene Inspection" Add-on will be
committed separately, to expose the VR functionality in the UI. It also
adds some further features for milestone 1, namely a landmarking system
(stored view locations in the VR space)
Main additions/features:
* Support for rendering viewports to an HMD, with good performance.
* Option to sync the VR view perspective with a fully interactive,
regular 3D View (VR-Mirror).
* Option to disable positional tracking. Keeps the current position (calculated
based on the VR eye center pose) when enabled while a VR session is running.
* Some regular viewport settings for the VR view
* RNA/Python-API to query and set VR session state information.
* WM-XR: Layer tying Ghost-XR to the Blender specific APIs/data
* wmSurface API: drawable, non-window container (manages Ghost-OpenGL and GPU
context)
* DNA/RNA for management of VR session settings
* `--debug-xr` and `--debug-xr-time` commandline options
* Utility batch & config file for using the Oculus runtime on Windows.
* Most VR data is runtime only. The exception is user settings which are saved
to files (`XrSessionSettings`).
* VR support can be disabled through the `WITH_XR_OPENXR` compiler flag.
For architecture and code documentation, see
https://wiki.blender.org/wiki/Source/Interface/XR.
---------------
A few thank you's:
* A huge shoutout to Ray Molenkamp for his help during the project - it would
have not been that successful without him!
* Sebastian Koenig and Simeon Conzendorf for testing and feedback!
* The reviewers, especially Brecht Van Lommel!
* Dalai Felinto for pushing and managing me to get this done ;)
* The OpenXR working group for providing an open standard. I think we're the
first bigger application to adopt OpenXR. Congratulations to them and
ourselves :)
This project started as a Google Summer of Code 2019 project - "Core Support of
Virtual Reality Headsets through OpenXR" (see
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/).
Some further information, including ideas for further improvements can be found
in the final GSoC report:
https://wiki.blender.org/wiki/User:Severin/GSoC-2019/Final_Report
Differential Revisions: D6193, D7098
Reviewed by: Brecht Van Lommel, Jeroen Bakker
The feature is hidden behind an experimental option, you'll have to
enable it in the preferences to try it.
This feature is not yet considered fully stable, crashes may happen, as
well as .blend file corruptions (very unlikely, but still possible).
In a nutshell, the ideas behind this code are to:
* Detect unchanged IDs across an undo step.
* Reuse as much as possible existing IDs memory, even when its content
did change.
* Re-use existing depsgraphs instead of building new ones from scratch.
* Store accumulated recalc flags, to avoid needless re-compute of things
that did not change, when the ID itself is detected as modified.
See T60695 and D6580 for more technical details.
Part of the fix was to get gputexture to use an array to accomodate each
eye. This takes care of viewports showing individual Left or Right
views.
For the combined view the fix was in overlay_image.c:camera_background_images_stereo_setup.
Note 1: Referece images are still not supporting stereo.
Note 2: For painting, and getting image bindcode I'm hardcording a
single-view experience.
Note 3: Without D6922 stereo is too broken to even test this patch.
With D6922 + this patch the fullscreen modes work (anaglyph/interlace
not yet).
Differential Revision: D7143
Both are doing almost the same and can be merged. This reduce complexity for user and less code to maintain.
Reviewed By: mendio, pepeland, fclem
Differential Revision: https://developer.blender.org/D7134
We implement cubemap array support for EEVEE's lightcache reflection probes.
This removes stretched texels and bottom hemisphere seams artifacts caused
by the octahedral projection previously used.
This introduce versioning code for the lightcache which will discard any
lightcache version that is not compatible.
Differential Revision: https://developer.blender.org/D7066
This is more in line with standard grids and means we don't have to make
many special exceptions in the upcoming change for arbitrary number of volume
grids support in Eevee.
The workbench shader was also changed to fix bugs where squared density was
used, and the smoke color would affect the density so that black smoke would
be invisible. This can change the look of smoke in workbench significantly.
When using the color grid when smoke has a constant color, the color grid
will no longer be premultiplied by the density. If the color is constant
we want to be able not to store a grid at all. This breaks one test for
Cycles and Eevee, but the setup in that test using a color without density
does not make sense. It suffers from artifacts since the unpremultiplied
color grid by itself will not have smooth boundaries.
Differential Revision: https://developer.blender.org/D6951
'Private' can be a rather confusing term, especially when considering
its meaning in programming languages.
So now root node trees and master collections are 'embedded' IDs
instead.
This commit is a full refactor of the grease pencil modules including Draw Engine, Modifiers, VFX, depsgraph update, improvements in operators and conversion of Sculpt and Weight paint tools to real brushes.
Also, a huge code cleanup has been done at all levels.
Thanks to @fclem for his work and yo @pepeland and @mendio for the testing and help in the development.
Differential Revision: https://developer.blender.org/D6293
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
"session-wise" here mean while editing a same .blend file. So creating
or opening a new one will reset the uuid counter. This should avoid any
overflow in practice.
Only IDs added to Main database get an uuid, runtime-only ones are not
affected.
This is intended to provide undo with a way to find IDs across several
'memory realms' (undo speedup project).
No behavior change is expected from this commit itself.
Part of T60695.
Differential Revision: https://developer.blender.org/D7007
- Use 'BKE_object_material_*', 'BKE_id_material_*' prefix
for functions that operate on Object and ID types.
- Use '_len' suffix for length (matching BLI naming).
- Use '_p' suffix for functions that return a pointer to values
where the value would typically be returned.
Functions renamed:
- BKE_object_material_resize was BKE_material_resize_object
- BKE_object_material_remap was BKE_material_remap_object
- BKE_object_material_remap_calc was BKE_material_remap_object_calc
- BKE_object_material_array_p was BKE_object_material_array
- BKE_object_material_len_p was BKE_object_material_num
- BKE_id_material_array_p was BKE_id_material_array
- BKE_id_material_len_p was BKE_id_material_num
- BKE_id_material_resize was BKE_material_resize_id
- BKE_id_material_append was BKE_material_append_id
- BKE_id_material_pop was BKE_material_pop_id
- BKE_id_material_clear was BKE_material_clear_id
Consequences of own refactor of usercount handling in readfile.c
(rB367ecff15d74).
Not super happy to have to call that function twice, but that should be
OK (not a real overhead here anyway).
It does not make sense to read those values when loading a file and they can crash the cursor if they contain invalid coordinates.
Reviewed By: brecht
Maniphest Tasks: T54270
Differential Revision: https://developer.blender.org/D6754
Having that extra ID users handling at readfile level, besides generic
one ensured by libquery, has been something bothering me for a long time
(had to fix my share of bugs due to mismatches between those two areas).
Further more, work on undo speedup will require even more complex ID
refcount management if we want to keep it in readfile.c area.
So idea is instead to generalize what we did for linked data already
when undoing: recompute properly usercount numbers after liblink step,
for all IDs.
Note that extra time required here is neglectable in a whole .blend file
reading (few extra milliseconds when loading a full production scene
e.g.).
Notes:
* Some deprecated data (IPOs) are not refcounted at all anymore, this
should not be an issue in pratice since the are supposed to get deleted
after doversion anyway.
* Refcounting happens after `do_versions_after_linking`, i.e those
functions won't get valid ID usercounts currently. Again, this is not a
problem in current code, if needed we could recompute refcount before,
and then ensure `do_versions_after_linoiing()` actually handles properly
usercount, which it does not currently.
Differential Revision: https://developer.blender.org/D6881
Library data-blocks are supposed to be tagged as 'real user', i.e.
have one virtual user, since nothing else actually uses (refcounts)
them. That was done in liblink code, but not for newly added ID-LI IDs
when linking from a new libblend file e.g.
Using a struct here allows to change given parameters to the callbacks
without having to edit all callbacks functions, which is always noisy
and time consuming.
