Refactor `ED_object_parent_set`:
- Mark parameters `ob` and `par` as `const` so that it's clear the
function doesn't assign any other value to them.
- Rename `pararm` to `is_armature_parent`; I mis-read it as `param` all
the time, and it was very confusing.
- Replace repeated `if-else` statements with `switch` statements.
- Reorder preconditions to have some simple checks first.
- Flip condition on a huge `if`-statement to return early and unindent
the remainder of the function.
This function still requires splitting up into smaller functions, but at
least this is a step forward.
No functional changes.
Refactor the operator exec function into a few smaller functions. The exec
function was mixing up vertex-parent and non-vertex-parent code, including
incorrect comments.
No functional changes.
More localized variables, avoid ugly 'offset by one' index usage in
favor of explicit `INDEX_UNSET` define, etc.
No behavior change expected from this commit.
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/blenlib` module. Not all warnings are
addressed in this commit.
No functional changes.
When overriding a whole linked collection from a single object in
3DView, said 'reference' object would be removed by code. We only want
that behavior when overriding from an instanciating Empty.
Removed the 'select main object to override' menu when overriding an
instanced collection, this was no more used anyway.
Added new behavior allowing to select which directly linked collection
to override when trying to override an inderctly linked object. This
allows to link collections without instancing them with an empty object,
select one of their objects, and call override operator.
Note that this behavior is enforced on user level for now, but on code
side it is controlled with a flag, which should make it easy to refine
that behavior if needed.
Only exception is when we duplicate a linked ID directly (then we assume
user wants a local deep-copy of that linked data, and we always also
duplicate linked sub-data-blocks).
Note that this commit also slightly refactor the handling of actions of
animdata, by simplifying `BKE_animdata_copy_id_action()` and adding an
explicit new `BKE_animdata_duplicate_id_action()` to be used during ID
duplication (deep copy).
This also allows us to get rid of the special case for liboverrides.
This one now uses a generic 'dependency detection' process to decide
which IDs should be overridden.
This will e.g. allow to override mesh and shapekeys when those have some
values controlled by drivers using an armature bone...
We want to get rid of those for all ID types ultimately, but that one
was only used in one place, being the only one calling
`BKE_collection_duplicate` without hierarchical duplicate and parent
collection pointer, effectively using the full power of the complex deep
duplication code for a mere `BKE_id_copy` call...
This will allow for further cleanup in duplicate code.
Now all overrides are handled that way. Performances of the process look
decent enough, even with production characters...
If performance issues still arise, we'll investigate other solutions.
This should also make T73154 obsolete now.
When using the "Make Library Override" operator on instance collections, keep
the overriden collection in the parent collection of the instance empty.
Previoulsy the collection would be added to the scene collection, which was
confusing and not what users expected. It was placed there for a reason after
all.
Part of T76555.
Reviewed by: Andy Goralczyk, Bastien Montange.
Differential Revision: https://developer.blender.org/D7626
Unlink (delete if single-user) collection instance empty once an override is
added to the collection through the "Make Library Override" operator. It isn't
used as a collection instance anymore then so the emtpy is an annoying left
over that has no purpose.
Part of T76555.
Reviewed by: Andy Goralczyk, Bastien Montange.
Differential Revision: https://developer.blender.org/D7626
If we parent with type `PAR_ARMATURE` (where vertexgroups are already
set up and named correctly according to the corresponding bones), we
still need an armature modifier. This just wasnt added.
In contrast to meshes [which add their armature modifier early in
`ED_object_parent_set`], grease pencil used to do this (adding the
armature modifier) in `ED_gpencil_add_armature_weights`.
Now split ED_gpencil_add_armature_weights in two:
- ED_gpencil_add_armature
- ED_gpencil_add_armature_weights (which calls ED_gpencil_add_armature)
- use ED_gpencil_add_armature for the PAR_ARMATURE case
Maniphest Tasks: T76416
Differential Revision: https://developer.blender.org/D7625
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
Parenting in the outliner via drang and drop would always happen without
the 'Keep Transforms' option. Since this is often desired, this adds the
ability to hold Alt for doing this to the drop action.
Adding the hint to hold Alt to the operator name is not nice, but since
the operator name is used for the UI, there doesnt seem to be a nicer
way of doing this.
If modifier keys are needed back for other actions, spawning a menu
instead could be an alternative for the future.
Maniphest Tasks: T74649
Differential Revision: https://developer.blender.org/D7120
This change fixes artifacts produced by these operations.
On a technical aspect this is done by porting all of the operations
to the new subdivision surface implementation which ensures that
tangent space used to evaluate modifier and those operations is
exactly the same (before modifier will use new code and the operations
will still use an old one).
The next step is to get sculpting on a non-top level to work, and
that actually requires fixes in the undo system.
- Split 'verify_fcurve' into two functions:
ED_action_fcurve_ensure which adds the f-curve if needed.
ED_action_fcurve_find which returns NULL when not found.
Callers of ED_action_fcurve_find had unused 'group'
argument which has been removed.
- Rename verify_adt_action to ED_id_action_ensure
It had an argument to add data which was always true,
remove this instead of splitting in into a separate function.
- Use 'BKE_object_material_*', 'BKE_id_material_*' prefix
for functions that operate on Object and ID types.
- Use '_len' suffix for length (matching BLI naming).
- Use '_p' suffix for functions that return a pointer to values
where the value would typically be returned.
Functions renamed:
- BKE_object_material_resize was BKE_material_resize_object
- BKE_object_material_remap was BKE_material_remap_object
- BKE_object_material_remap_calc was BKE_material_remap_object_calc
- BKE_object_material_array_p was BKE_object_material_array
- BKE_object_material_len_p was BKE_object_material_num
- BKE_id_material_array_p was BKE_id_material_array
- BKE_id_material_len_p was BKE_id_material_num
- BKE_id_material_resize was BKE_material_resize_id
- BKE_id_material_append was BKE_material_append_id
- BKE_id_material_pop was BKE_material_pop_id
- BKE_id_material_clear was BKE_material_clear_id
fails
Exposed by rB50d5c03e2d14.
This was only a problem when _only_ 'Object Data' was made local.
If also e.g. 'Object' or 'Materials' was checked, these were already
making sure realations were updated [DEG_relations_tag_update(bmain)].
Now also call DEG_relations_tag_update(bmain) for the 'Object Data'
case.
I assume the underlying issue is that there is some ID_NEW_REMAP
happening in 'single_obdata_users()' -- including that for 'me-
>texcomesh', which might be responsible for the glitches in selection/
editing? Also not entirely sure why this wasnt a problem prior to
rB50d5c03e2d14.(I assume this was somewhat hidden by the fact this was
always called with a default action being nothing, the user would always
need to access the redo panel. So this might have been hidden by an Undo
step involved?)
Maniphest Tasks: T73797
Differential Revision: https://developer.blender.org/D7020
Using a struct here allows to change given parameters to the callbacks
without having to edit all callbacks functions, which is always noisy
and time consuming.
This works on selected_editable_objects, so no active object mandatory.
After deletion of the active object and using slection tools such as
e.g. box select, the lack of an active object would prevent this
operator from being called without good reason.
Also cannot think of any other existing poll that would really make
sense (Editor type, ...).
ref T68975
Maniphest Tasks: T68975
Differential Revision: https://developer.blender.org/D6773
