- autodetect optimal default, which typically avoids HT threads
- can store setting in .blend per scene
- this does not touch general omp max threads, due i found other areas where the calculations are fitting for huge corecount
- Intel notes, some of the older generation processors with HyperThreading would not provide significant performance boost for FPU intensive applications. On those systems you might want to set OMP_NUM_THREADS = total number of cores (not total number of hardware theads).
Summary:
The title actually says it all, it's just possible to
have independent free handles for mask splines. Also
it's now possible to have aligned handles displayed
as independent handles.
Required changes in quite a few places, but they're
rather straightforward.
From user perspective there's one really visible change
which is removed Handle Type menu from the panel. With
asymmetric handles it's not clear which handle type to
display there. So now the only way to change handle type
is via V-key menu.
Rewrote normal evaluation function to make it deal
with new type of handles we support. Now it works in
the following way:
- Offset the original spline by maximal weight
- Calculate vector between corresponding U positions
on offset and original spline
- Normalize this vector.
Seems to be giving more adequate results and doesn't
tend to self-intersect as much as old behavior used to,
There're still some changes which needed to be done, but
which are planned for further patch:
- Support colors and handle size via themes.
- Make handles color-coded, just the same as done for
regular bezier splines in 3D viewport.
Additional changes to make roto workflow even better:
- Use circles to draw handles
- Support AA for handles
- Change click-create-drag to change curvature of the
spline instead of adjusting point position.
Reviewers: campbellbarton
CC: sebastian_k, hype, cronk
Differential Revision: http://developer.blender.org/D121
Bevel Factor Mapping allows to control the relation between bevel factors
(number between 0 and 1) and the rendered start and end point of a beveled
spline.
There are three options: "Resolution", "Segments", "Spline". "Resolution"
option maps bevel factors as it was done < 2.71, "Spline" and "Segments"
are new.
* "Resolution“: Map the bevel factor to the number of subdivisions of a
spline (U resolution).
* "Segments“: Map the bevel factor to the length of a segment and to the
number of subdivisions of a segment.
* "Spline": Map the bevel factor to the length of a spline.
Reviewers: yakca, sergey, campbellbarton
CC: sanne
Differential Revision: https://developer.blender.org/D294
Located on topology panel.
To use just click on button and click on mesh.
Operator will just use the dimensions of the triangles below to set the
constant detail setting.
Also changed pair of scale/detail size with nice separate float
percentage value.
Nothing spectacular here, fill tools are easy. Just take the dyntopo
code and repeat until nothing more to do.
The tool can be located in the dyntopo panel when the dyntopo constant
detail is on.
Also added scale factor for constant detail. This may change when detail
sampling gets in, I am not very happy with having two numbers here,
still it will give some more control for now.
This commit introduces support for a number of new interpolation types
which are useful for motion-graphics work. These define a number of
"easing equations" (basically, equations which define some preset
ways that one keyframe transitions to another) which reduce the amount
of manual work (inserting and tweaking keyframes) to achieve certain
common effects. For example, snappy movements, and fake-physics such
as bouncing/springing effects.
The additional interpolation types introduced in this commit can be found
in many packages and toolkits (notably Qt and all modern web browsers).
For more info and a few live demos, see [1] and [2].
Credits:
* Dan Eicher (dna) - Original patch
* Thomas Beck (plasmasolutions) - Porting/updating patch to 2.70 codebase
* Joshua Leung (aligorith) - Code review and a few polishing tweaks
Additional Resources:
[1] http://easings.net
[2] http://www.robertpenner.com/easing/
Fluid sims have a very nasty feature for interaction, in which a psys
can directly update the bvhtree for //another object's psys//. This
breaks with threaded depsgraph evaluation and is generally a no-go.
To avoid crashes for now, use a global mutex to avoid concurrent writes
to an object psys' bvhtree.
Was using wire or black in many places, this color is used for cursor,
camera guides, transform helper lines. So its possible to have a dark
background with light overlay color.
Patch D331 by Brita, with some edits.
This is a standard Hue - Saturation - Lightness model
(see for instance entry on wikipedia here: https://en.wikipedia.org/wiki/HSL_and_HSV)
Note though the difference between HSV and HSL saturation, which are not the same.
The advantage of having this color selection scheme is that artists can select
shades and tints of a color easily by using the lightness slider. Also colors
are arranged on (approximated) perceived lightness on the color wheel.
Beware, Old files opened with this preference saved will crash!
Reviewers: sergey, brecht, campbellbarton
Differential Revision: https://developer.blender.org/D385
All textures are sampled bi-linear currently with the exception of OSL there texture sampling is fixed and set to smart bi-cubic.
This patch adds user control to this setting.
Added:
- bits to DNA / RNA in the form of an enum for supporting multiple interpolations types
- changes to the image texture node drawing code ( add enum)
- to ImageManager (this needs to know to allocate second texture when interpolation type is different)
- to node compiler (pass on interpolation type)
- to device tex_alloc this also needs to get the concept of multiple interpolation types
- implementation for doing non interpolated lookup for cuda and cpu
- implementation where we pass this along to osl ( this makes OSL also do linear untill I add smartcubic to the interface / DNA/ RNA)
Reviewers: brecht, dingto
Reviewed By: brecht
CC: dingto, venomgfx
Differential Revision: https://developer.blender.org/D317
in threaded depgraph updates and effector list construction.
Gathering effectors during depgraph updates will call the
psys_check_enabled function. This in turn contained a DNA alloc call
for the psys->frand RNG arrays, which is really bad because data must be
immutable during these effector constructions.
To avoid such allocs the frand array is now global for all particle
systems. To avoid correlation of pseudo-random numbers the psys->seed
value is complemented with random offset and multiplier for the actual
float array. This is not ideal, but work sufficiently well (given that
random numbers were already really limited and show repetition quite
easily for particle counts > PSYS_FRAND_COUNT).
Dyntopo detail in object space. This allows to set the detail in
percentage of blender units and sculpt in this detail constantly,
regardless of the distance to the mesh.
This commit just enables the functionality, which is really trivial.
There will be some more commits like detail flood fill and
detail sampling in the future.
Implements a more flexible internal connect function for standard nodes
(compositor, shader, texture). Allow feasible datatype connections by
priority.
The priorities for common datatypes in compositor, shader and texture
nodes are encoded in a simple function. Certain impossible connections
(e.g. color -> cycles shader) are excluded by giving them -1 priority.
Priority overrides link status: If a higher priority input can be found,
this will be used regardless of link status. Link status only comes into
play for inputs with same priority.
Reviewers: brecht
CC: sebastian_k
Differential Revision: https://developer.blender.org/D356
After some discussion it seems both are valid defaults but useful for
very different purposes.
- 'free' lets you explore the scene with full 6dof (like fly mode)
- 'orbit' is closer to typical mouse view orbit, constraining to orbiting about a central location.
This doesn't effect orbit/pan which are available with modifier keys.
The "Cast Shadows" worked as expected, but it can cause problem in some cases.
For example, when using strand render, we need disabling only buffer shadows,
but the previous changes made that impossible. "Cast Shadows" should be added
as a newly created option.
This allows us to make materials that don't cast ray shadows.
Turning off this property can reduce the rendering time slightly.
Note: RNA path is changed to "use_cast_shadows" as well. The older
path "use_cast_buffer_shadows" still can be used as its alias, but
it will be removed after updating some addons.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D272
FCurve Noise Modifer now has an extra float property which offsets the noise in time.
This is useful for creating follow through in procedurally animated noise.
For example, if you've used a noise modifier on a parent bone to add additional movement,
a quick and easy way to add overlapping motion is to create copies of that modifier on
its children, and then offset the time those curves play at. See this in action at:
http://youtu.be/Ph6fk_z_k3k
Reviewed By: Joshua Leung
Based on the patch from Sebastian Koenig, discussed with Jonathan Williamson
https://developer.blender.org/T38172
Also removed redundant modes from clip editor.
Reviewers: brecht, carter2422
Reviewed By: carter2422
CC: sebastian_k, carter2422
Differential Revision: https://developer.blender.org/D293
Description:
--------------------------
Use loose edges marked as seams as sewing springs.
Usage:
-------------------------
All this patch does is set the rest length to 0 and the stiffness to 1 for springs for loose edges marked as seams so that during the cloth simulation they will be brought together.
Example Video:
-------------------------
http://www.youtube.com/watch?v=-Y_bC0gjoM0
Original Patch by thesleepless (+ git patch by codemanx)
Thank you!
Z, Index, normal, UV and vector passes are only affected by surfaces with alpha
transparency equal to or higher than this threshold. With value 0.0 the first
surface hit will always write to these passes, regardless of transparency. With
higher values surfaces that are mostly transparent can be skipped until an opaque
surface is encountered.
Added function called WM_set_locked_interface which does
two things:
- Prevents event queue from being handled, so no operators
(see below) or values are even possible to run or change.
This prevents any kind of "destructive" action performed
from user while rendering.
- Locks interface refresh for regions which does have lock
set to truth in their template. Currently it's just a 3D
viewport, but in the future more regions could be considered
unsafe, or we could want to lock different parts of
interface when doing different jobs.
This is needed because 3D viewport could be using or changing
the same data as renderer currently uses, leading to threading
conflict.
Notifiers are still allowed to handle, so render progress is
seen on the screen, but would need to doublecheck on this, in
terms some notifiers could be changing the data.
For now interface locking happens for render job only in case
"Lock Interface" checkbox is enabled.
Other tools like backing would also benefit of this option.
It is possible to mark operator as safe to be used in locked
interface mode by adding OPTYPE_ALLOW_LOCKED bit to operator
template flags.
This bit is completely handled by wm_evem_system, not
with operator run routines, so it's still possible to
run operators from drivers and handlers.
Currently allowed image editor navigation and zooming.
Reviewers: brecht, campbellbarton
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D142
Changed curve active point from pointer to index. Allows curve active point to be saved to file and retained between modes for free. Also some small optimisations by removing pointer look up code.
- Made active point access functions into BKE API calls.
- Fixes operators where curve de-selection resulted in unsel-active point.
- Split curve delete into 2 functions
For example for vector displacement, you may have an EXR texture that has
negative colors values. Blender clamps these by default, now the Colors panel
for textures has a Clamp option to disable this clamping.
This option affects all texture types and is enabled by default, you need
to disable it if you want negative values to have an influence.
Patch by Fredrik Hansson with modifications by me.
This was storing the original object matrix, which builds on the
assumption that obmat is modified during dupli construction, which is a
bad hack.
Now the obmats are still modified, but this only happens outside of the
dupli system itself and the original ("omat") is stored as local
variables in the same place where the obmat manipulation takes place.
This is easier to follow and avoids hidden hacks as much as possible.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D254
patch D234 from Jonathan Williamson with edits
- de-duplicate rna_def_userdef_theme_space_gradient and rna_def_userdef_theme_space_generic
- ui_theme_init_new_do now always sets theme settings (no need to test),
used by bpy.ops.ui.reset_default_theme()
Evaluating the animation is causing the object to get tagged as changed, but in
this case it's not a permanent change so no one should be notified. Also found
a case where the persistent ID for duplis wasn't unique, fixed that as well.
Increase the maximum allowed amount of points in a spline from currently 32,767 (short) to 2,147,483,647 (int).
Change variables that get assigned the value from pntsu/pntsv to int type all over the codebase.
Change function parameters that previously passed the count as short to int type as well.
(because https://developer.blender.org/T38191)
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D212
This commit introduces the ability to make the Build Modifier operate in reverse,
essentially allowing it to be used as a "deconstruction" effect.
(See D219 for more details about use cases for this)
This patch makes it possible to customise the colours used for the different
keyframe types (Keyframe, Breakdown, Extreme, Jitter) and the border colours
(normal and selected).
Reviewed by: Joshua Leung
