This option joins any stroke with an end near the actual stroke. Now it is not limited to the last stroke, any stroke in the same layer for the actual frame can be joined. The join can join two strokes drawing a third stroke.
If the end and the start of the result stroke are very small, the stroke is changed to be cyclic automatically.
There is a limit distance to join the stroke, if the distance is greater than this value, the strokes are not joined. Actually, a constant, threshold distance is used, but we could expose
as a parameter in the UI in the future.
The tool can be used with freehand drawing or with primitives.
Note: Great part of the patch is just a refactor of the old code to make it accessible and to keep code organized.
Reviewed By: mendio
Maniphest Tasks: T82377
Differential Revision: https://developer.blender.org/D9440
Edges with 3 or more connected UV's caused UV pack to fail.
Instead of using functions from uvedit_parametrizer.c which are intended
specifically for ABF/LSCM unwrapping, use a simpler method for packing
which stores arrays of BMesh faces.
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
Instead to use the ID of the object, now the parameter is an Enum with Selected object or New.
If use selected mode, the first grease pencil object selected is used. If none of the selected objects is a grease pencil object, a new object is created.
Small cleanup changes to the original patch.
Differential Revision: https://developer.blender.org/D9529
Issue exposed by rB4c7b1766a7f1.
Main idea is that non-memfile first undo step should check into previous
memfile and tag the ID it is editing as `future_changed`.
That way, when we go back and undo to the memfile, said IDs are properly
detected as changed and re-read from the memfile.
Otherwise, undo system sees them as unchanged, and just re-use the
current data instead.
Note that currently only Sculpt mode seems affected (probably because it
is storing the mode switch itself as a Sculpt undo step instead of a
memfile one), but similar action might be needed in some other cases
too.
Maniphest Tasks: T82388
Differential Revision: https://developer.blender.org/D9510
When painting in the image editor on data images (Non-color, Raw) the
color mismatched between the sampled color and the actual effect that
the painting has on the image. The root cause is that the sampling is
color managed, but the painting still uses a fixed color management
pipeline with a lot of assumptions. Due to recent changes the drawing
of the image editor is color managed, but the painting isn't what made
these changes show up.
This patch is a work-a-round so that the sampled colors and the effect
the paint has on the texture matches. This isn't the correct solution
as that would be to migrate all the painting tools to use proper color
management.
Reviewed By: Pablo Dobarro
Differential Revision: https://developer.blender.org/D9411
Fixes 18 misspellings of 'predefined', 'Look Up', 'Lookup', and 'No One'.
Differential Revision: https://developer.blender.org/D9466
Reviewed by Hans Goudey
These functions were not used elsewhere, and the handling for the panel
tabs should be kept local to this file where possible. Also remove
another unused function and removed an unecessary "_ex" function.
I think there wasn't actually any issue currently, but only by luck. We still
passed around and NULL-checked a pointer to freed memory (the file operator,
`SpaceFile.op`) which is easy to break and should be avoided.
Noticed while testing D8598.
The behavior of the incremental snap did not take into account the
relative dimensions of the window, which resulted in a different behavior
if the area height was greater than the width.
Consistently return `false` from `ED_object_parent_set()` when parenting
is not possible. Before, when parent and child were the same object, the
function would return `true` even though the parent-child relation was
not made.
Just returning `false` in the `parent == child` case would break the
parenting operator, as `false` stops its loop over all selected objects.
This tight coupling caused T82312. The loop now has its own check for
this, so that it properly continues, and the implementation of
`ED_object_parent_set()` is decoupled from its surrounding code.
No functional changes.
This adds support for treating multiple undo steps as a single step
from the user perspective.
This is needed for outliner mode switching and `object.switch_object`
operator which change active object and mode in a single action.
When outliner datablocks are selected, switch to the corresponding tab
for that datablock in properties editors. Only properties editors
that share an edge with the outliner will change tabs.
Additionally, when modifiers, constraints, and shader effects are
selected from the outliner, the panel will be expanded in all properties
editors.
Part of T77408
Manifest Task: https://developer.blender.org/T63991
Differential Revision: https://developer.blender.org/D8638
With D8234 a new drawing method for UV/Image editor was introduced. For debugging
reasons we left the old drawing method in the code base. This patch will remove
the old drawing method.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D9011
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
This patch implements panel expansion saving and resetting for property
search. While search is active, the panel expansion is based on whether
or not it has a search result. When the search finishes, the panel
expansion returns to its state before the search started. However, any
panels interacted with during the search won't reset their expansion.
This requires adding a new runtime flag for panels to store whether to
use search result status as expansion. It also requires better handling
for animation when panel expansion changes with another new runtime flag.
`UI_panel_is_closed` gets the search-dependent expansion, but it is
intentionally not used to access expansion in every case-- sometimes it's
necessary to use `PNL_CLOSED` directly.
Differential Revision: https://developer.blender.org/D8984
Split up `ANIM_deselect_anim_channels()` into
`ANIM_anim_channels_select_set()` and
`ANIM_anim_channels_select_toggle()`.
`ANIM_anim_channels_select_set()` is equivalent to the old
`ANIM_deselect_anim_channels(..., false, ACHANNEL_SETFLAG_xxx)`.
`ANIM_anim_channels_select_toggle()` is equivalent to the old
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_ADD)`.
`ANIM_deselect_anim_channels(..., true, ACHANNEL_SETFLAG_CLEAR)` was
also called once. The `true` parameter suggested the "toggle" behaviour
was intended, but the `ACHANNEL_SETFLAG_CLEAR` argument prevented any
toggling. This is now replaced with `ANIM_anim_channels_select_set(ac,
ACHANNEL_SETFLAG_CLEAR)` to make this explicit.
No functional changes, just a cleanup in order to better understand how
the selection works.
This patch enables property search for all tabs in the property editor.
To make interaction faster, if the editor's current tab doesn't have a
result, the current tab changes to the next tab that has a match.
This patch implements basic code that only searches panels.
While we could run the existing "single tab" property search for every
tab, that would also do everything else related to the layout pass,
which would be less efficient, and maybe more complicated to maintain.
The search match status for every current tab of the property editor is
stored in a runtime bitfield and them displayed later by dimming icons
in the tab selector panel to the left. Using `BLI_bitmap` properly in
the runtime struct required moving it to `buttons_intern.h` and
adding a small API to access the search filter instead.
To make sure the editor isn't influenced by anything that happens while
building the layout for other tabs, most of the context is duplicated
and the new search is run in the duplicated editor.
Note that the tool settings tab works slightly different than the other
tabs, so I've disabled searching it for this commit. That would be a
relatively simple improvement, but would just require a bit of
refactoring of existing code.
Differential Revision: https://developer.blender.org/D8859
This adds arguments to `uiLayout.prop_tabs_enum` and the C equivalent
(`uiItemTabsEnumR_prop`) to gray out tabs based on a boolean array.
For property search in multiple tabs, we need a way to show which tabs
have a search result, but we still need to show which tab is active.
Differential Revision: https://developer.blender.org/D8858
Default text output routines (which do not specify a size) will now use Text Style point size.
Differential Revision: https://developer.blender.org/D9107
Reviewed by Brecht Van Lommel
In the graph editor there is a panel that says "Active Keyframe" for
numerically editing a keyframe's values, but in the code there is no
concept of the "active keyframe." Since this is a useful concept to
have for some other features anyway, this commit adds an active
keyframe index value to FCurves. It also displays it with a theme
color for the active vertex (which didn't exist before) if the
FCurve is active.
The active keyframe in the graph editor is treated similarly to the
active vertex in the 3D view. It is the keyframe most recently selected
with a single click, and it is always selected.
For now, the only real functional change is that the active keyframe
appears in white and it should be more predictable which keyframe is
being edited in the sidebar panel.
Differential Revision: https://developer.blender.org/D7737
Because the active context is stored as a short in DNA it's better
to use short in the code surrounding it. Also adjusted a comment
that reflected an incorrect assumption.
This commit makes the panel expansion set based on the search results
when the active tab in the properties editor changes. The multi-tab
search patch (D8859) actually doesn't handle this because it uses a
different code path.
This feature uncovered a subtle but fairly significant issue with the
implementation of property search (More details in T81113). Basically,
the search needed multiple redraws to properly display the expansion of
panels based on the search results. Because there is no animation of
panel expansion when switching tabs, the problem was exposed only now.
With this commit, hiding of "search only" buttons and panel size
calculation happens in a single final step of the panel layout pass.
The "search only" layout root flag is removed. Instead every button
inside a panel header is in a single "uiButtonGroup" marked with a
specific "in header" flag, an idea which could be generalized in the
future.
Differential Revision: https://developer.blender.org/D9006
Specific armature editing undo code would duplicate and store a list of
editbones. However, those are not linked to main data storage and should
therefore never affect ID usercounting.
Version patching userpref.blend wasn't using the correct version,
causing settings not to be properly updated.
This seems the likely cause of T70196 and similar bugs.
It looks like this code was left over from tabbed panels in the
properties editor. It wasn't used anywhere except for in one line of
the horizontally-aligned panel code that was recently removed.
Differential Revision: https://developer.blender.org/D8651
The "UI_panel_set_expand_from_list_data" doesn't need to be in the
public API since it's just called every time an instanced panel is added.
This commit just sets the expansion automatically and adjusts some
naming to account for the moved function.
In the 3D view sidebar, the active tool settings panel can be pinned to other
categories, and in those other categories it doesn't redraw when the active
tool changes. This commit checks for pinned panels from the "Tool" category
when checking whether to redraw.
Note that the relatively expensive string comparison is only done for
currently visible pinned panels.
Differential Revision: https://developer.blender.org/D9012
Since the search is applied all in one phase, there is no need to store
a reference to the search filter in every uiBlock. Instead just pass it
as an argument to UI_block_apply_search_filter.
Those two functions had `BKE_` prefix, were defined in BKE headers, but
implemented in ED code, yuck.
Moved everything to ED area for now, since those do not look fondamental
enough to belong to BKE, and none of their usages requires it currently.
