This shouldn't really be part of the windowmanager code. Pulling it out
now, so that we can reuse in RNA when switching display modes,
(and perhaps other places later)
Notes:
* Really need to address RNA setters case, end up adding way too much
G.main here these days... :/
* Added Main pointer into bAnimContext, helps a lot in anim code ;)
When using copy on write, insert keyframe operators were reading from old
bmain data instead of COW data. This meant that inserting keyframes would
often read old/stale data, resulting in invalid keyframes getting created
(e.g. from last transform operation, instead of actual current state).
This commit makes it so that keyframing operators will ask depsgraph for
the evaluated copy of the data, so that it can read values from that. It
introduces a new function - `DEG_get_evaluated_rna_pointer()`, which when
working correctly/fully, should work just like the other `DEG_get_evaluated_*()`
functions, except it lets you pass in an RNA Pointer.
However, currently, this is only done for Pose Bones (as a dirty hack, since this
is an important/pivotal requirement for production) and/or datablock
properties directly (since we can just use the DEG_get_evaluated_id() directly).
on the datablock.
Committing to a branch for now as this all needs more testing. More work to come
later at a more sane time of day!
* Draw the frame/time number box over the scrollbar instead of above it,
to reduce the clutter/clashes with markers.
* Draw the box centered around the line instead of off to one side,
making it clearer that the frame shown is the one being affected.
* Make the box larger than the scrollbar + use white text to make it
stand out from the neighbouring frame numbers (otherwise, it's easy
to misread that it's just another one of those)
This uses the global scene range, with styling matching the sequencer's start/end
frame drawing.
(The graph editor's "drivers" mode is exempt, as that doesn't really display time
in a linear way, so the start/end frames don't apply)
For many years, animators have been requesting the ability to edit keyframes in the
timeline. However, implementing such tools in the timeline quickly becomes a slippery
slope, where we'll eventually end up having to duplicate all the functionality from the
dopesheet editor.
Discussing with William and Pablo this morning, we realised that perhaps it might be possible
to just make the Timeline a mode of the Dopesheet Editor (and kill off the old standalone
Timeline), meaning that we essentially get all the Dopesheet Editor goodness for free!
Also, with some proposed UI updates (i.e. allowing "submodes" of editors to be part of the
the main editors selector), it might not even matter that there isn't an "actual" timeline
editor anymore.
This commit implements the following changes (which are actually sufficient for supporting
most basic workflows):
* Timeline mode in Dopesheet Editor
* Tweaks to UI code to make the Timeline header/menus show up in Dopesheet editor
TODO:
* Hide channels list when switching to timeline mode
* Port over cache-file indicators
* Add missing timeline-only settings that need a new home in the dopesheet
* Go through fixing all timeline editor operators (e.g. Bind to camera)
* Port over start/end frame shading (and adjust preview range rendering to make the
distinction between these clear)
* Remove old timeline editor, and transfer over any leftover code
The RenderResult struct still has a listbase of RenderLayer, but that's ok
since this is strictly for rendering.
* Subversion bump (to 2.80.2)
* DNA low level doversion (renames) - only for .blend created since 2.80 started
Note: We can't use DNA_struct_elem_find or get file version in init_structDNA,
so we are manually iterating over the array of the SDNA elements instead.
Note 2: This doversion change with renames can be reverted in a few months. But
so far it's required for 2.8 files created between October 2016 and now.
Reviewers: campbellbarton, sergey
Differential Revision: https://developer.blender.org/D2927
Cyclic extrapolation is implemented as an f-curve modifier, so this
technically violates abstraction separation and is something of a hack.
However without such behavior achieving smooth looping with cyclic
extrapolation is extremely cumbersome.
The new behavior is applied when the first modifier is Cyclic
extrapolation in Repeat or Repeat with Offset mode without
using influence, repeat count or range restrictions.
This change in behavior means that curve handles have to be updated
when the modifier is added, removed or its options change. Due to the
way code is structured, it seems it requires a helper link to the
containing curve from the modifier object.
Reviewers: aligorith
Differential Revision: https://developer.blender.org/D2783
After revert the commit rB4b99958ca12642, the line added at the end of the enum is not necessary anymore because it is replaced by the corresponding element in the list in the right position.
This reverts commit 5aa19be912 and b4a721af69.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
The idea is to allow certain animation channels to be always visible in
animation editors. So, for example, one can pin Camera animation to the
editor so it is always possible to refine/tweak camera animation when
animating something else in the scene.
There is probably some more polishing required, and some current
limitations could be solved in the future but should be a good starting
point already.
Currently only works for object without recursing into deeper datablock
(so for example, it's not possible to pin object material animation).
Studio request by Colin Levy.
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
This commit introduces a scale factor setting for scaling all keyframe indicators
in the Dopesheet Editor up/down, in order to make them easier to select. It is perhaps
most useful for keyframe types which are usually indicated using smaller keyframes
(e.g. breakdown), which may get tricky to quickly select.
By popular request, restored the ability to shift-click on the X (unlink) button
to unlink the action (from the active action slot), clear the Fake User, and
also remove the NLA-stashed copy (only works for the current object/NLA stack though).
team.
There are 3 options here:
1) Keep range (previous behaviour)
2) Seconds - allows a specified offset in seconds around current frame
3) keyframes - zoom to include a number of keyframes around the cursor
Options 2 and 3 have their own properties to tweak the behaviour and all
options can be found in User Preferences->Interface under the 2D
viewports section.
Number 3 will probably need some refinement so commiting here for the
hwoozeberry team to test first.
After looking into this more carefully, I've found that we do in fact need a dedicate
operator to add some custom logic when trying to unlink an action from the editor/datablocks.
Specifically, this new operator does the following:
1) When in Tweak Mode, it shouldn't be possible to unlink the active action,
or else, everything turns to custard.
2) If the Action doesn't have any other users, the user should at least get
a warning that it is going to get lost.
3) We need a convenient way to exit Tweak Mode from the Action Editor
4) If none of the above apply, we can just unlink normally
This commit implements this for the Action Editor, with stubs for the NLA Editor too.
Those will be fixed next.
When renaming animation channels, the old names are no longer drawn behind the
text boxes anymore. This used to cause problems if the names were long, or
if text boxes were set to have transparent backgrounds.
Thanks to kopias for reporting on IRC.
This works by using the distance in the x axis only (usually artists want to influence nearby
keyframes based on timing, not value). Tweaking handles is the same as tweaking
the central handle. It's a bit ambiguous if proportional editing is really meaningful
for handles but will leave that for artists to decide.
Using the standard "FCurve" animchannel type didn't work that well for
the control FCurves on NLA Strips, as the paths would not resolve correctly,
and the indentation was wrong. Also, there would likely be issues down the
track with applying NLA mapping. Hence, it's easier to just create a separate
type for this case, and adapt the rest of the code to also consider these (todo).
The "Nla Strip Controls" channel is used to house the per-strip
FCurves for controlling the strip_time and influence properties.
It sits above the active action's first group, at the same level
in the hierarchy as other groups.
TODO: It looks like a dedicated FCurve channel is needed for these
control FCurves, so that we won't accidentally apply NLA mapping
or have these FCurves disabled by the path lookups failing.
