Some RNA structs, like operators or keymaps, are not allowed to have ID
pointer properties. now this check will ignore those, and report an
error message in the console.
Related to T82597.
Notes: While a bit more involved than rBf39fbb3e6046, this commit
remains fairly localized and non-intrusive.
It relies on some rather obscure and weird behaviors of our RNA code
though, a cleaner solution could be e.g. to add a tye to
`StructOrFunctionRNA`, so that we could properly 'rebuild' (re-cast) the
pointer to either `StructRNA` or `FunctionRNA` when needed in internal
code...
This reverts commit f39fbb3e60.
Code is not valid, `DefRNA.laststruct` does not always point to the
proper struct when defined from Python, need to be done differently.
Some RNA structs, like operators or keymaps, are not allowed to have ID
pointer properties. now this check will ignore those, and report an
error message in the console.
Related to T82597.
Remove `return` from for-loop which blocked the recalculation of driven
values when it found the first driver.
Reviewed By: sybren, sergey
Differential Revision: https://developer.blender.org/D9515
It should not be possible to set the scene collection's color tag
through rna. Also adds a missing notifier for setting the collection
color tag from python.
After rB452a1c7b3838 there were still a few cases where the old
collection icon was used in the interface. Replace these with the new
filled collection icon.
Differential Revision: https://developer.blender.org/D8660
This patch is the result of the GSoC 2020 "Editing Grease Pencil Strokes
Using Curves" project. It adds a submode to greasepencil edit mode that
allows for the transformation of greasepencil strokes using bezier
curves. More information about the project can be found
here: https://wiki.blender.org/wiki/User:Filedescriptor/GSoC_2020.
The overlap with the `Panel` flags that start with "PNL" was quite
confusing because wasn't clear which enum a flag was from. The
new names are a bit longer, but the clarity is worth it.
Note that due to convoluted layout of point caches in RNA (active one
also storing list of all available ones), we'll often have the
pointcache overrides rules twice. Should not be a huge problem,
practically speaking.
Part of first step of T82503: support disk cache in liboverrides.
Image format code checked the file type against an enum except for
zero which is used when the format can't be detected.
Also add doc-strings to some of the image file type callbacks.
This patch adds an opacity slider to the wireframe overlay. The previous
wireframe in dense geometry scenes could be too dark and sometimes the
user just wants an impression of the geometry during modelling.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D7622
Add a new property `co_ui` to Keyframes, the modification of which will
apply to the keyframe itself as well as its Bézier handles.
Dragging the "Keyframe" slider in the properties panel now maintains the
deltas between the keyframe and its handles, just like moving the key in
the graph editor would.
Reviewed by @sybren in T81813.
And remove Blender preference, which was expected to be set to match the system
preference for correct behavior. Instead just handle this automatically.
Differential Revision: https://developer.blender.org/D9402
Move the "Show Group Colors" toggle from a per-editor option to a single
user preference in the Animation preferences. The Grease Pencil
animation channel side panel allows picking a channel color; this now
shows a message when channel colors are disabled.
The old "Show Group Colors" toggle had to be set per editor, and was on
by default. This meant that disabling group colors would require an
action for every file, for every editor. It is very hard to select a
color that works both as bone color in the 3D Viewport (needs to be
bright there) as well as the channel list (needs to be dark there), most
animators turn channel list colors off.
Differential Revision: https://developer.blender.org/D9391
This adds a Box option to the Text strip's style properties, plus related Box Margin value:
{F9208309}
When enabled the text is placed on top of a solid-filled rectangle of a chosen color, as shown below:
{F9208324}
When the box option is disabled the text strip works the same as it does now. When the box option is enabled the meaning of the Shadow option changes to provide a drop-shadow on the rectangle (and not on the text itself). The latter made more sense to me.
The box margin is specified as a fraction of the image width. The offset of the drop-down box shadow is fixed to a specific fraction of the image width as well.
I tested this feature on a movie of a couple of minutes containing dozens of text strips (all with box background), edge cases like multi-line strings and text overlapping the image edges.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D9468
Proxies are expected to be fast to read. Storing them in cache has
little to no effect on performance.
This change also allows to omit invalidation of cache when user switch
between proxies and original media.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9473
"Camera Parent Lock" can be useful when rigging cameras, but it is not
intuitive, and has also generated a lot of confusion (bug reports).
This is because it breaks the fundamental parent <-> child relationship
conventions in Blender, and there is no indication that it's intended
without diving into the preferences.
This commit moves the setting to the object level, and exposes it in
the relations panel in the property editor. It is exposed for every
object type because any object type can be "View Locked" in the 3D view.
The property description is also updated to reflect this change and be
more specific without getting too long.
In the future this could become a more general feature of the transform
system, but for now it is limited to "Lock Camera to View".
Differential Revision: https://developer.blender.org/D9239
Fixes 18 misspellings of 'predefined', 'Look Up', 'Lookup', and 'No One'.
Differential Revision: https://developer.blender.org/D9466
Reviewed by Hans Goudey
Map frame for cached raw images to strip input media frame range. This
means that static images or extended frame range of movies will only
generate one cache entry.
timeline_frame is stored in cache key as a reference - on what frame
was this entry created, so we don't have to reverse lookup frame range.
Since each media frame corresponds to one cache frame with same frame
index key, there is no need to invalidate raw cache when changing time
remapping properties like use_reverse_frames or strobe
No changes are needed for disk cache, since invalidating raw entry
assumes all data will be invalidated.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9462
Replace BKE_sequencer wirh SEQ_render or SEQ_proxy prefixes.
In cases where function is very generic, only SEQ prefix is used.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9439
Use "Rotation" in place of "Rot" for the rotation header text.
Cleanup various RNA titles and tooltips.
Differential Revision: https://developer.blender.org/D9457
Set step in RNA property definition.
There was a hardcoded setting of a1 for this specific button, which
used to be the variable to store the step size of number buttons until
rBe6f0b60c2e91. hardcoded value is removed in rBe29206f86a5f.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D9277
This patch allows the user to type a property name into the
Attribute node, which will then output the value of the property
for each individual object, allowing to e.g. customize shaders
by object without duplicating the shader.
In order to make supporting this easier for Eevee, it is necessary
to explicitly choose whether the attribute is varying or uniform
via a dropdown option of the Attribute node. The dropdown also
allows choosing whether instancing should be taken into account.
The Cycles design treats all attributes as one common namespace,
so the Blender interface converts the enum to a name prefix that
can't be entered using keyboard.
In Eevee, the attributes are provided to the shader via a UBO indexed
with resource_id, similar to the existing Object Info data. Unlike it,
however, it is necessary to maintain a separate buffer for every
requested combination of attributes.
This is done using a hash table with the attribute set as the key,
as it is expected that technically different but similar materials
may use the same set of attributes. In addition, in order to minimize
wasted memory, a sparse UBO pool is implemented, so that chunks that
don't contain any data don't have to be allocated.
The back-end Cycles code is already refactored and committed by Brecht.
Differential Revision: https://developer.blender.org/D2057
This addition to the filters allows the user to enable the
outliner tree to restrict the listing to only Selectable objects.
Differential Revision: https://developer.blender.org/D7310
`WM_operator_properties_filesel()` allows C operators to set a display or sort
type for the File Browser to use. But the File Browser would always override
that because of an invalid `_is_set()` check. (The operators don't actually set
the value, they only set the property's default value.)
The only operator affected by this is "Recover Auto Save". It is supposed to
show a vertical list ordered chronologically. It used settings from the
previous File Browser usage before this patch.
Operators using the File Browser should generally use
`FILE_DEFAULTDISPLAY`/`FILE_SORT_DEFAULT` now, except if they have a reason not
to. See comments at their definition.
----
This makes it so operators that set a different display or sort type
don't change the sort or display type for the next File Browser operation.
So using "Recover Auto Save" entirely isolates display and sort type from other
operations.
Differential Revision: https://developer.blender.org/D8598
Reviewed by: Bastien Montagne
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
