memory. Poses should be relinked right after duplicating, not during a
redraw (when more objects use same armature).
Added in readfile a patch to make sure files saved with this duplicate
error can still be used.
unpredictable one!
This is what it did; if two or more Constraints are of the same type, it
accumulates the Target positions/rotations for the constraints, averages
them, and then only applies the last Constraint in the row. It seems to
be a trick to blend IK Constraints or so... in all other cases I cannot
find a good use for it (nor did Bassam).
For example; add three Empties, and make one Empty to have 2 location
constraints to the other two. This just didn't work, unless you insert
an "Empty" constraint inbetween.
I will post in the blender.org animation forum feedback for it too. :)
Its quite easy to make it an option, but I first like to grasp fully what
the actual use of such an option is.
Main target was cleanup of editconstraint.c and removal of the ugly
ob->activecon (active constraint channel), which was set by the "Show"
button in the Constraint Panel.
Better is to introduce an 'Active Constraint' itself, which stores in
the Constraint itself. By using this setting, and by checking the active
Bone, the UI can update reliably now. This only shows now in IpoWindow
btw (for constraint ipos). The active Constraint is drawn in the Buttons
with a slightly brighter backdrop. Any action in that Panel selects a
constraint now (even click in backdrop).
So now we have pose channels & constraint channels nicely behaving. Now the
darn Action channels... :)
Further in this commit:
- interface.c: Button ROUNDBOX now does button callback too.
Button NUMSLI didn't do the callback on a click only
- Cleaned up include files in yafray, got annoyed it compiled over all the
time.
- removed unused variables from Constraint struct
- new feature, twiddled with lattice resizing to try to maintain
existing vertex changes... much nicer than just resetting the
lattice if you decide you need more detail in the lattice.
- modifiers work with lattices now. yes, that does mean you
can make a chain of lattices effecting each other 8 miles
long.
- some cleanup of softbody code, was rather splintered and call
path was twisted and confusing. reworked main object step
routine to do things in a more obvious and consistent manner
and without duplicate code
- added ob->softflag OB_SB_RESET instead of sbObjectReset
call
- modifier changes reset softbody now
- moved curve_getVertexCos/curve_applyVertexCos into curve.c
- update curve modifier eval to work with virtual modifiers
- update modifier apply to work with curves/surfs
- update make parent to also recalc object data
NOTE: Although you can turn SB on for curve/font objects at the
moment it doesn't really work because they call deform in
multiple steps and this confuses SB. Not sure how to deal with
atm.
- removed {lattice,curve}_modifier functions
- changed render code to use displist for curve rendering
instead of making its own. required adding a bevelSplitFlag
field to DispList. I also fixed the bevel face splitting
which did not work correctly in many situations.
- changed so all curve data creation happens in makeDispListCurveTypes,
includes making bevel list and filling polys
- changed render code to use displist for surface rendering
- removed Curve.orco variable, built as needed now
- removed stupid BLI_setScanFill* functions... why use a function
argument when you can use a global and two functions! Why indeed.
(this fixed crash when reloading a file with filled curves and
toggling editmode)
- bug fix, setting curve width!=1 disabled simple bevel for no
apparent reason
- cleaned up lots and lots of curve/displist code (fun example:
"if(dl->type==DL_INDEX3 || dl->type==DL_INDEX3)"). Hmmm!
- switched almost all lattice calls to go through lattice_deform_verts,
only exception left is particles
- added DBG_show_shared_render_faces function in render, just
helps to visualize which verts are shared while testing (no
user interface).
- renamed some curve bevel buttons and rewrote tooltips to be
more obvious
- made CU_FAST work without dupfontbase hack
Also by the way I wrote down some notes on how curve code
works, nothing spiffy but it is at:
http://wiki.blender.org/bin/view.pl/Blenderdev/CurveNotes
can only follow deform (for example, they store mesh vertex
indices)
- added ModifierType.foreachObjectLink for iterating over Object
links inside modifier data (used for file load, relinking, etc)
- switched various modifiers_ functions to take object argument
instead of ListBase
- added user editable name field to modifiers
- bug fix, duplicate and make single user didn't relink object
pointers in modifier data
- added modifiers to outliner, needs icon
- added armature, hook, and softbody modifiers (softbody doesn't
do anything atm). added conversion of old hooks to modifiers.
NOTE-THE-FIRST: User name field is not initialized on loading 2.38 files
so if you have saved stuff with a cvs blender you will see blank names.
NOTE-THE-SECOND: Since modifiers aren't evaluated yet for non-Mesh
objects, hooks for lattices and curves are broken. Don't updated if
you actually, say, *use* Blender.
NOTE-THE-THIRD: Old hooks used a quirky weighting system during
deformation which can't be extended to modifiers. On the upside,
I doubt anyone relied on the old quirky system and the new system
makes much more sense. (Although the way falloff works is still
quite stupid I think).
inherit pose rotation/scale from its parent pose-channel.
Button is available in Editing Buttons for PoseMode as well as EditMode.
Aim is to reduce overhead of Constraint usage (copy location).
(in object.c I removed old code for IK)
with MSVS 8)
- broke mesh_create_shadedColors out of shadeDispList, used to
build vertex colors for mesh in vpaint as well (also fixed
bug where they were not initialized correctly for subsurfs)
- added modifier_copyData and modifier_findByType functions
- change editmode modifiers to only calculate if Realtime and
Editmode bits are both set, makes more sense for copying
modifiers
- update object_copy to correctly copy modifiers
- removed duplicate redefinition of ME_ attributes in python,
this is a horrible idea, why was it done in the first place?
- update armature auto vertex group code to check for subsurf
in modifier stack
- fixed flip_subdivision to work with move to modifier stack
- added copymenu_modifiers, can copy all modifiers or just
data from first modifier of a certain type (not sure how
to deal with multiple modifiers of same type... not
a big issue though I think)
- Added option to the IK buttons, to have it use the 'tip' as end of the
IK chain. I never really understood this old convention (IK didn't work
on the Bone itself).
Old files still will read OK though. But I made the "To Tip" a default
when adding new IK constraints.
- Hotkey CTRL+I: add IK, with option to have it adding an Empty target,
or use a selected Bone as target. With the new non-modal PoseMode, it
gives instant access to playing with the IK chain.
- Hotkey ALT+I: clears IK, on all selected Bones
- Hotkey ALT+C: clears Constraints on all selected Bones (incl IK)
- PoseMode now is a state Armature Objects can be in. So, while in PoseMode
for an Armature, you can just select another Object or Armature.
- The old PoseMode options (transform, insert keys etc) are accessible
with making the Armature Object 'active' (and have object in PoseMode).
- At this moment no multiple Poses can be transformed/edited at the same
time.
- The old hotkey CTRL+TAB, and view3d header menu, still work to set an
Object's PoseMode
It was quite a lot recode, so tests & reports are welcome.
Oh, as a bonus I added Lasso Select for Bones in PoseMode! It selects using
only the line between root and tip of the Bone.
- added ModifierTypeInfo.freeData function
- added modifier_{new,free] utility function
- added ccgSubSurf_getUseAgeCounts to query info
- removed subsurf modifier faking (ME_SUBSURF flag is no
longer valid). subsurf modifier gets converted on file load
although there is obscure linked mesh situation where this
can go wrong, will fix shortly. this also means that some
places in the code that test/copy subsurf settings are broken
for the time being.
- shuffled modifier calculation to be simpler. note that
all modifiers are currently disabled in editmode (including
subsurf). don't worry, will return shortly.
- bug fix, build modifier didn't randomize meshes with only verts
- cleaned up subsurf_ccg and adapted for future editmode modifier
work
- added editmesh.derived{Cage,Final}, not used yet
- added SubsurfModifierData.{mCache,emCache}, will be used to cache
subsurf instead of caching in derivedmesh itself
- removed old subsurf buttons
- added do_modifiers_buttons to handle modifier events
- removed count_object counting of modifier (subsurfed) objects...
this would be nice to add back at some point but requires care.
probably requires rewrite of counting system.
New feature: Incremental Subsurf in Object Mode
The previous release introduce incremental subsurf calculation during
editmode but it was not turned on during object mode. In general it
does not make sense to have it always enabled during object mode because
it requires caching a fair amount of information about the mesh which
is a waste of memory unless the mesh is often recalculated.
However, for mesh's that have subsurfed armatures for example, or that
have other modifiers so that the mesh is essentially changing on every
frame, it makes a lot of sense to keep the subsurf'd object around and
that is what the new incremental subsurf modifier toggle is for. The
intent is that the user will enable this option for (a) a mesh that is
currently under active editing or (b) a mesh that is heavily updated
in the scene, such as a character.
I will try to write more about this feature for release, because it
has advantages and disadvantages that are not immediately obvious (the
first user reaction will be to turn it on for ever object, which is
probably not correct).
modifier objects
- make unlink_object clear Lattice & Curve Modifier object references
- add expand_modifiers for liblinking
There really needs to be a more consistent and unified way of dealing
with datablock references between objects. It should be possible to
make this generic so that lib_link, expand_, DEP graph, unlink,
oops and maybe outliner can use a single API. The code to deal with
this is too bulky and error prone at the moment.
- removed mesh_deform (merge into mesh_modifier)
- switch python lattice_apply function to use object_apply_deform,
this isn't exactly equivalent but the python system shouldn't
have been calling that deep into the kernel anyway.
New feature: Modifier stack
- added Object.modifiers (list of ModifierData elements)
- added DNA_modifier_types.h
o contains type definition for the file data for the various
modifier types
- added BKE_modifier.h
o contains modifierType_get_info (access to modifier type registry)
o structs and defines for runtime modifier usage
- updated mesh_calc_modifiers to evaluate modifier stack (note that
for the time being it also evaluates the old style modifiers so files
should load and work as normal).
- add file handling modifier code (todo: don't replicate on object copy)
- add modifier stack UI code (lives in object panel)
Only real new feature at the moment is that you can apply lattices and
curves *after* a subdivision surface which was never possible before.
Todo:
- DEP graph updating does not work correctly yet, so you generally have
to tab cycle to see results.
- editmode calculation does not use modifier stack.
- bug fixes (there must be a few in there somewhere)
- changed mesh_modifier, sbObjectStep, object_deform to take vertexCo
argument instead of operating on mesh
- fixed bug where a derived mesh would not be returned in editmode
- removed object_wave, replaced by init_wave_deform and calc_wave_deform
- moved cached DerivedMesh to Object, not Mesh... fixes heisenbugs
with linked objects
- fix DerivedMesh.getMinMax implementations to set min & max when
there are no vertices
- mesh boundbox calc was wrong in some cases, messed up HOMEKEY
and localview zooming
- appropriate callers of makeDispList replaced with depgraph calls
- unappropriate places just killed... small chance this gives some
errors in corner cases if dep graph isn't notified (example, font
family displists) but these can be tracked down as they show up.
- still a large number of callers of makeDispListCurveTypes, but
makeDispListMesh has just a few.
- switch all mesh boundbox access to go through mesh_get_bb
- switch object_handle_update to call mesh_changed instead of making
the displist data immediately (delayed calculation)
- cleaned up 'version correction' a bit. There was code slowing down
current files even (armatures were evaluated all, even when not in
current layer, was added to make sure they get converted OK).
Send me old files that crash now! :)
- on reading older files with path-constraints, a fix had to be added.
- error "badd call to addqueue' found when using header-less window for
filewindow
weird disabled code that was hanging out there for ages.
Also cleaned up NLA blending itself, it was copying far too much data
around. Should be three times faster or so... need good test!
And restored Action Baking.
- ALT+R clear rotation on PoseMode didn't work when an Action was assigned
- 'Delete object' didn't set object pointers to NULL for Armature/Pose
constraints (old bug)
Aim was to get a total refresh of the animation system. This
is needed because;
- we need to upgrade it with 21st century features
- current code is spaghetti/hack combo, and hides good design
- it should become lag-free with using dependency graphs
A full log, with complete code API/structure/design explanation
will follow, that's a load of work... so here below the list with
hot changes;
- The entire object update system (matrices, geometry) is now
centralized. Calls to where_is_object and makeDispList are
forbidden, instead we tag objects 'changed' and let the
depgraph code sort it out
- Removed all old "Ika" code
- Depgraph is aware of all relationships, including meta balls,
constraints, bevelcurve, and so on.
- Made depgraph aware of relation types and layers, to do smart
flushing of 'changed' events. Nothing gets calculated too often!
- Transform uses depgraph to detect changes
- On frame-advance, depgraph flushes animated changes
Armatures;
Almost all armature related code has been fully built from scratch.
It now reveils the original design much better, with a very clean
implementation, lag free without even calculating each Bone more than
once. Result is quite a speedup yes!
Important to note is;
1) Armature is data containing the 'rest position'
2) Pose is the changes of rest position, and always on object level.
That way more Objects can use same Pose. Also constraints are in Pose
3) Actions only contain the Ipos to change values in Poses.
- Bones draw unrotated now
- Drawing bones speedup enormously (10-20 times)
- Bone selecting in EditMode, selection state is saved for PoseMode,
and vice-versa
- Undo in editmode
- Bone renaming does vertexgroups, constraints, posechannels, actions,
for all users of Armature in entire file
- Added Bone renaming in NKey panel
- Nkey PoseMode shows eulers now
- EditMode and PoseMode now have 'active' bone too (last clicked)
- Parenting in EditMode' CTRL+P, ALT+P, with nice options!
- Pose is added in Outliner now, with showing that constraints are in
the Pose, not Armature
- Disconnected IK solving from constraints. It's a separate phase now,
on top of the full Pose calculations
- Pose itself has a dependency graph too, so evaluation order is lag free.
TODO NOW;
- Rotating in Posemode has incorrect inverse transform (Martin will fix)
- Python Bone/Armature/Pose API disabled... needs full recode too
(wait for my doc!)
- Game engine will need upgrade too
- Depgraph code needs revision, cleanup, can be much faster!
(But, compliments for Jean-Luc, it works like a charm!)
- IK changed, it now doesnt use previous position to advance to next
position anymore. That system looks nice (no flips) but is not well
suited for NLA and background render.
TODO LATER;
We now can do loadsa new nifty features as well; like:
- Kill PoseMode (can be option for armatures itself)
- Make B-Bones (Bezier, Bspline, like for spines)
- Move all silly button level edit to 3d window (like CTRL+I = add
IK)
- Much better & informative drawing
- Fix action/nla editors
- Put all ipos in Actions (object, mesh key, lamp color)
- Add hooks
- Null bones
- Much more advanced constraints...
Bugfixes;
- OGL render (view3d header) had wrong first frame on anim render
- Ipo 'recording' mode had wrong playback speed
- Vertex-key mode now sticks to show 'active key', until frame change
-Ton-
Note: currently the 'baking' stores the entire animation system, which
makes further animation refining (or duplicating) useless for a Baked
SoftBody. You can even delete the entire anim system.
This can be presented as a feature too (saves slow armature stuff).
However, I might check on a 'relative' bake too.
- Made Blender.event var (previously only used by script links) hold ascii value -- where it applies -- of current event during events callback registered with Draw.Register(gui, events, button_events). Useful for gui scripts like Campbell's Python console. No problem using this var to hold the value, since in gui scripts it was not used (always None).
- Updated Window and Window.Theme with new theme vars and the Time space.
- Script links:
-- Added "Render" event for script links (runs twice, second time as "PostEvent", for clean-up actions). Now FrameChanged links don't run when a single pic is rendered.
-- Added "Enable Script Links" button in the script buttons tab. Now this bit gets saved in .blends along with the rest of G.f, so users can define per .blend if they are on or off by default. "blender -y" also disables all slinks as happened before with OnLoad ones only.
-- Other small changes in the script buttons tab:
When a link is added (button "new"), it becomes the active one for the window, no need to press a button to reach it.
Also, a pupmenu showing all available texts is shown when "new" is pressed, so users can choose a text w/o having to type. Cancel the popup to leave the string button empty (link exists, but has no script assigned). A pulldown would be better UI-wise, but it's kinda weird to show both scripts and normal texts (Blender doesn't differentiate them) in a script links pulldown. With a popup we can show only texts ending in ".py" (not done in this commit, need opinions) and if the script has no or another extension, case of many in old and current .blend's, there's still the string box for writing its name.
-- Implemented Ton's space handler script links:
Right now only for the 3d View, but it's trivial to add for others. There are two types: EVENT, to receive 3d View events from a chosen window and DRAW, to draw on the window. Ton's idea was to give scripts a controlled way to integrate better within Blender.
Here's how it works:
- scripts must have a proper header, like:
# SPACEHANDLER.VIEW3D.EVENT
and then they are shown in 3d View's View menu, "Space Handler Scripts" submenu. Check (mark, click on it) a script to make it active.
EVENT handlers should consult the Blender.event var to get the current event, which can be compared with values from the Draw module:
import Blender
from Blender import Draw
evt = Blender.event
if evt == Draw.AKEY:
print "a"
elif evt == Draw.LEFTMOUSE:
print "left mouse button"
else:
return # ignore, pass event back to Blender
Blender.event = None # tell Blender not to process itself the event
DRAW handlers are free to draw to their owner 3D View. OpenGL attributes and modelview and projection matrices are pushed before running the handler and poped when it finishes.
To communicate between EVENT and DRAW handler scripts we have the Blender.Registry module, as always.
Still need to code some nice example, which should also serve to test properly space handlers. Simple tests went fine.
- doc updates about the additions.
=======
Note: the UI part of the space handlers and script links is of course open for changes, I just tried to make it understandable. Probably we won't use the scriptlinks icon for "None Available" (check 3d View -> View -> Space Handler Scripts), though it hints at what space handlers are. The tooltips may not be accepted either, since other menus don't use them. Opinions welcomed.
Works as follows;
- press the 'show bake settings' button (no space left... :)
- define start/end frame for bake, and an interval step.
The baked result interpolates nicely (Bspline, 4 keys) so in general a
step size of 2 or 3 still gives OK results.
- Press "BAKE". This will do a full animation + playback. Press ESC if it
you don't want it.
Once Baked, the BAKE button becomes a FREE BAKE. As reminder the softbody
buttons get blocked with error() menu.
This saves OK in a file. Renders any frame, including fields and moblur.
You can also set a "Timeoffs" for the softbody. And yes, this should be
in the NLA once... :)
NOTE! With this commit, files saved with the old (first commit) version by
Jens Ole won't read the settings back... he stored all sofbody variables in
Object, which was moved to a new struct when I did my first commit on SB
(over a month ago)
Also note that I moved particle deflecting & softbody to a new include.
- after grab/duplicate the softbody didn't get a reset signal
- added 'copy properties' for softbody settings
- duplicate object didn't copy softbody yet
User level notes are in Wiki here;
http://wiki.blender.org/bin/view.pl/Blenderdev/Softbodies
And will be added in blender3d.org CMS later.
Tech level notes are still pending, but here's the most relevant ones;
- made ob->soft struct SoftBody to hold all settings, and read/save in
files
- added (temporal!) conversion for the old settings. So: read old files
with softbody experiments now, and save over!
- cleaned API calls for softbody, which are only 5 of them now:
sbNew()
sbFree()
sbObjectStep() (animation steps)
sbObjectToSoftbody() (full re-initialize data)
sbObjectReset() (only reset motion)
- API calls accepts time in frames now, within softbody.c it converts
Further, internally code was cleaned some (missing tabs etc). Also tried
to keep a well defined structure with hints how to add support for more
objects. Can write notes about that...
NOTE: BLI_winstuff.h was meant to be a wrapper around windows.h to handle
undefining various crap that windows.h defines. Platform specific headers
should only have to be included in a few places. This reduces the number
of inclusions of BLI_winstuff.h to 16 which is a much more reasonable
number (than the 144 or whatever it used to be)
Much wanted feature, to have paths with children having fixed distance
offsets from each other, for example to animate a train with wagons.
Solved it with Path option (Editing buttons curve) "PathDist Offs" which
interprets time-offsets of children as blender-unit offsets. The entire
animation system still works, but offsets are calculated based on distance,
even with a CurvePath without motion (speed curve horizontal).
http://download.blender.org/demo/test/pathdist.blend
Thanks to Bassam for kicking my ass!
It used to be a simple hack, scaling lens with 100, and moving the camera
to the back with an equivalent amount.
Because of the hack, making it 100% compatible with older files I could not
achieve (yet?). To help reminding users, I've added a print when reading
old files with Ortho cameras.
Full description of how it works can be found here;
http://www.blender3d.com/cms/Render_changes.515.0.html
Object "time" ipo was evaluated before it applied offset for field and
motion blur. Should be after! (ancient one)
in buttons_editing.c: removed sound include file
- Dupli-Frames objects didn't render correct with Motion Blur (they moved!)
- VertexKey on Bezier paths didn't animate the 'twist' rotation. This did
work for Nurbs paths.
Plus; removed Nabla slider from Stucci, it doesn't work for that texture.
channels to link texture to.
The amount of code changes seems large, but is mostly getting rind of
hardcoded values (6 and 8) for channels, replacing it with MAX_MTEX.
Further did some fixes;
- Ipo for Lamp showed too many mapping channels
- Texture MapTo buttons for lamp missed the slider to blend texture color
- Lamp texture mapping "View" only worked for Spot, now it uses lamp-
view vector for all types. (Nice for projections!)
- bug #1307; copy full scene didn't update links in constraints
(was an oldie bug!)
- also fixed same for Hooks, which even't didn't duplicate yet
- HOME in outliner (show hierarchy) now only does current scene
