This option from the very beginning of its existence needed more work
to make it work correct and this was never done.
This option was working fine during continuous playback, when there
are no skipped frames, but it was failing when AV-sync of framedrop
was enabled.
It was never working correct when jumping between frames, including
rendering on a farm which usually does frame-range based rendering.
With copy-on-write things became even more tricky, since the "stuck"
flag was never preserved between re-evaluations.
Fixes T65683: Sticky Option in Floor Constraint for Bones Not Working
Better to make internal code naming match official/UI naming to some
extent, this will reduce confusion in the future.
This is 'breaking' scripts and files that would use that feature, but
since it is not yet officially supported nor exposed in 2.80, as far
as that release is concerned, it is effectively
a 'no functional changes' commit.
This also makes `IDP_CopyProperty` the "opposite"
of `IDP_FreeProperty`, which is what I'd expect.
Two refactoring steps:
* rename IDP_FreeProperty to IDP_FreePropertyContent
* new IDP_FreeProperty function that actually frees the property
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4872
This constraint requires full bone data to evaluate, so it can't
use the generic single target matrix system. Calculating it is
thus useless waste of CPU time.
Since scale is multiplicative, the appropriate way to partially copy
it is to use power. However, the influence slider of constraints uses
linear interpolation. Thus, there is no way to correctly split scale
via constraints without adding this feature.
In addition, this allows inverting scale by using negative powers,
fulfilling the function of Copy Rotation's Invert checkboxes.
Add a new option that makes the Spline IK solver apply volume
preservation on top of the original scaling, considering the
pre-IK scale of the bone as the goal volume to be preserved.
This basically works similar to the Stretch To constraint, and
allows easily rigging a stretchy chain that uniformly follows
its parent's scaling.
Since the Stretch To behavior is more familiar, the new option
is on by default for newly created Spline IK constraints.
After a lot of thinking about this, I decided that all operation modes
that I've tried over the past couple of years, including the original
2.79 one, have their uses after all. Thus the only reasonable solution
is to add yet another option.
The modes are:
- Strict: The current 2.80 mode, which overrides the original scaling
of the non-free axes to strictly preserve the volume. This is the most
obvious way one would expect a 'Maintain Volume' constraint to work.
- Uniform: The original 2.79 mode, which assumes that all axes have been
scaled the same as the free one when computing the volume. This seems
strange, but the net effect is that when simply scaling the object
uniformly with S, the volume is preserved; however, scaling the non-
free axes individually allows deviating from the locked volume.
This was obviously intended as a more or less convenient UI tool.
- Single Axis: My own variant of the intent of the Uniform scale, which
does volume-preserving if the object is scaled just on the Free axis,
while passing the non-free axis scaling through. I.e. instead of
uniform S scaling, the user has to scale the object just on its
primary axis to achieve constant volume. This can allow reducing the
number of animation curves when only constant volume scaling is needed,
or be an easier to control tool inside a complex rig.
* The cache file datablock is now evaluated as part of the dependency graph,
creating/freeing the Alembic file handle matching the current frame.
Modifiers and constraints depend on this evaluation.
* Cache file handles and readers now only exist on COW datablocks, never the
original ones.
* Object data paths are flushed back to the original for the user interface.
* The cache file keeps a list of all readers associated with its handle, and
automatically frees them when the handle is freed. This kind of sharing of
data across datablocks is weak but we have no better mechanism for it.
Fix T62720: Alembic sequences not working and crashing
Differential Revision: https://developer.blender.org/D4774
Previously Spline IK provided only two choices: either scale the
length of the bone chain to fit the length of the curve, or don't
scale the bone in the Y dimension at all (ignoring effects of
actually fitting to the curve due to curvature and curve object
scale).
This patch adds a new option to use the pre-IK Y scale of the
bones to adjust their length when fitted to the curve, allowing
individual posing control over the length of the segments.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D4687
Previously B-Bone deformation mapped every vertex to just one
B-Bone segment. This results in abrupt transformation differences
between the sides of each threshold plane, reducing the quality
of B-Bone deformation and making the use of shape keys impractical.
This commit replaces this approach with a linear blend between
the two closest segment transformations, effectively representing
the B-Bone as two weight-blended plain bones for each vertex.
In order to distribute the interpolation more evenly along the
bone, segment matrices for deformation are now computed at points
between the segments and at the ends of the B-Bone. The computation
also uses the true tangents of the Bezier curve for the orientation.
The nodes at the end of the bone require some special handling to
deal with zero-length Bezier handles caused by a zero ease value.
The Copy Transforms constraint now also smoothly interpolates
rotation and scaling along the bone shape when enabled.
The initial version of the patch was submitted by @Sam200.
Differential Revision: https://developer.blender.org/D4635
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
This commit makes it so curve path parent solving accepts an explicit
arguments for both time and curve speed flag, making it so we don't
have to mock around with scene's frame.
One unfortunate issue still is that if the instancing object is used
for something else, we might be running into a threading conflict.
Possible solution would be to create a temp copy of an object, but
then it will be an issue of preventing drivers from modifying other
datablocks.
At least the original issue is fixed now, and things behave same as
in older Blender version. Additionally, the global variable which
was defining curve speed flag behavior is gone now!
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
Computing the shape of a B-Bone is a quite expensive operation, and
there are multiple constraints that can access this information in
a variety of useful ways. This means computing the shape once per
bone and saving it is good for performance.
Since the shape may depend on the position of up to two other bones,
often in a "cyclic" manner, this computation has to be a separate
node with its own dependencies.
Reviewers: sergey
Differential Revision: https://developer.blender.org/D3975
The constraint is supposed to automatically initialize the rest
length when it is first evaluated, so now that evaluation is done
on a separate copy it also has to copy the value to the master
instance - or newly created constraints will be broken.
Since this is supposed to happen once at constraint creation,
implementing as a search for now instead of adding new fields.
The Nearest Surface Point shrink method, while fast, is neither
smooth nor continuous: as the source point moves, the projected
point can both stop and jump. This causes distortions in the
deformation of the shrinkwrap modifier, and the motion of an
animated object with a shrinkwrap constraint.
This patch implements a new mode, which, instead of using the simple
nearest point search, iteratively solves an equation for each triangle
to find a point which has its interpolated normal point to or from the
original vertex. Non-manifold boundary edges are treated as infinitely
thin cylinders that cast normals in all perpendicular directions.
Since this is useful for the constraint, and having multiple
objects with constraints targeting the same guide mesh is a quite
reasonable use case, rather than calculating the mesh boundary edge
data over and over again, it is precomputed and cached in the mesh.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D3836
The main use one can imagine for this is adding tweak controls to
parts of a model that are already deformed by multiple other major
bones. It is natural to expect such locations to deform as if the
tweaks aren't there by default; however currently there is no easy
way to make a bone follow multiple other bones.
This adds a new constraint that implements the math behind the Armature
modifier, with support for explicit weights, bone envelopes, and dual
quaternion blending. It can also access bones from multiple armatures
at the same time (mainly because it's easier to code it that way.)
This also fixes dquat_to_mat4, which wasn't used anywhere before.
Differential Revision: https://developer.blender.org/D3664
- Use smooth normals to displace in Above Surface mode.
- Add an option to align an axis to the normal in the constraint.
I've seen people request the alignment feature, and it seems useful.
For the actual aligning I use the damped track logic.
In order to conveniently keep mesh data needed for normal
computation together, a new data structure is introduced.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D3762
Allow raycasting in two directions and culling front or back faces.
Also implement a new Invert Cull option in both constraint and
modifier that can be used to aim for faces aligned with the project
axis direction when raycasting both ways.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D3737
In addition to the original map to surface and Keep Above Surface,
add modes that only affect vertices that are inside or outside
the object. This is inspired by the Limit Distance constraint,
and can be useful for crude collision detection in rigs.
The inside/outside test works based on face normals and may not be
completely reliable near 90 degree or sharper angles in the target.
Reviewers: campbellbarton, mont29
Differential Revision: https://developer.blender.org/D3717
