Add 'G_draw' for all draw manager globals,
avoids adding extern to each file.
Connection between `ts` and `globals_ubo` wasn't obvious,
now called `G_draw.block` & `G_draw.block_ubo`.
Some of Eevee's Bloom defaults are not very good for physically based rendering. This patches addresses this issue.
This picture shows one of the problems with current default. Bloom looks very foggy:
{F6280495}
Even worse, light emitters much dimmer than the Sun can make everything equally hazy if Clamp is set to 1.0 and intensity to 0.8 (current default). Artists often forget to adjust Clamp value and do not know what value to use for realistic intensity. Also, currently both Clamp and Intensity do not have good UI ranges. This is why often Eevee renders end up very hazy and bloom often does not look right.
Bloom effect plays important role to help to distinguish between bright and relatively dim light sources. With current defaults this is broken because Clamp set to 1.0. Also, it cannot be disabled if set to 0 like expected. This patch fixes this and sets it to 0 by default. If users need to clamp, they can do so easily with UI range up to 1000. This range is good enough for most cases and provides enough precision to control lower values, and the highest value helps to limit bloom from the Sun if necessary and will leave untouched most other light emitters. If needed, much higher values for Clamp can be entered manually up to 100000. 10000 is still affects the Sun, but up to 100000 highest limit allows to clamp anything that is much brighter than the Sun if user needs to limit bloom in such cases (for example, bright explosion in the sky or anything else very bright).
I propose new default for bloom Intensity - 0.05 and UI range to suggests realistic values. Bloom Intensity > 0.1 is not realistic for clean lens but the user can enter manually much larger values if needed.
For comparison, here is a my own photo with and without bloom caused by the Sun (on second photo the Sun was occluded with an object).
{F6280500}
{F6280492}
In real life bloom is much more subtle and does not look hazy. If Clamp is disabled, then out of 0.1, 0.05 and 0.025 values I have tried, 0.05 looks most similar to the photo. Here is test render with and without bloom with the Sun in similar position like on the photo:
{F6280496}
{F6280494}
Using color probe 27x27 I compared lightness below the horizon under the Sun. In rendered by Eevee images lightness difference was 17. In case of the photos lightness difference in similar place was 11. I then compared leftmost spot (also below the horizon) and lightness difference was approximately 2 between two photos and 1 between rendered images. In other words, with these settings bloom effect is not too strong and is not too weak. Visually it may seem like decreasing bloom intensity may increase photorealism, but then bloom effect would be too localized even for the Sun.
Besides this single test, I tested in many other scenes as well, with and without the Sun, with different HDRIs, and as far as I can tell 0.05 intensity turned out to be good default - it produces bloom strong enough to be noticeable and not too hazy.
In Cycles shutter default value is 0.50, so for consistency set to 0.5 by default in Eevee too. Besides, 0.5 is typical standard for real cameras, and values higher than 0.5 usually are needed only if very strong motion blur is desired.
Here is summary of all changes:
Bloom Intensity: 0.8 > 0.05
Bloom Intensity UI range: 0-10 > 0-0.1
Bloom Clamp: 1.0 > 0.0 (disabled by default)
Bloom Clamp manual range: 0-1000 > 0-100000
Bloom Clamp UI range: 0-10 > 0-1000
Shutter: 1.0 > 0.5
This patch is related to the discussion in this thread, there are more examples of what bloom will look like with 0.05 intensity by me and others:
https://devtalk.blender.org/t/eevee-needs-to-have-physically-based-defaults/4700
Reviewers: fclem
Reviewed By: fclem
Subscribers: pablovazquez, billreynish, rboxman
Tags: #eevee
Differential Revision: https://developer.blender.org/D4212
TH_BACK was being used when drawing the 3D view even though
there was no way to set the color in the preferences.
The color was zero'd when moving to the new 2.8x theme.
Having both gradient and background colors was confusing,
especially having to use 'TH_HIGH_GRAD' for the 3D view, 'TH_BACK' for
other views.
Move the background color back to 'TH_BACK', 'TH_BACK_GRAD' is used
when gradients are enabled.
RNA is unchanged so presets don't need updating.
Even though the fragment shader was already discarding all members of
dof_bokeh_sides when blades was zero, the C code was still trying to
use this for a few divisions leading to runtime asserts.
Those are harmless yet can lead some to waste time while pursuiting
other bugs (namely a near freeze when blades aspect ratio is too low).
Object visibility is now handled by the depsgraph iterator, but this API
was incomplete as it made no distinction for visibility of the object itself,
particles and generated instances.
The depsgraph iterator API now includes information about which part of the
object is visible, and this is used by Cycles to replace the old custom logic.
Cycles and EEVEE visibility should now be consistent, which unfortunately does
means some subtle compatibility breakage for both.
Fixes T58956, T58202, T59284.
Differential Revision: https://developer.blender.org/D4109
This now only upload data per loops to the GPU, making use of index buffer
to draw polygon. This make use of the vertex cache, speed up renders
and saves a lot of vram.
Update performance is also slightly faster and can even be improved further
by updating only uvs or vcol independently.
This commits breaks texture paint batches. It will be added back in another
commit.
This changes the bent normal effect to be a bit more subtle.
I also tuned down the bent normal blending factor so mesh faceted look may
appear more in occluded regions. this is to increase the fidelity of the
indirect lighting. This blending might be a parameter in the future.
Based the calculation on "Bent Normals and Cones in Screen-space"
by O. Klehm, T. Ritschel, E. Eisemann, H.-P. Seidel
There were at least three copies of those:
- OB_RECALC* family of flags, which are rudiment of an old
dependency graph system.
- PSYS_RECALC* which were used by old dependency graph system
as a separate set since the graph itself did not handle
particle systems.
- DEG_TAG_* which was used to tag IDs.
Now there is a single set, which defines what can be tagged
and queried for an update. It also has some aggregate flags
to make queries simpler.
Lets once and for all solve the madness of those flags, stick
to a single set, which will not overlap with anything or require
any extra conversion.
Technically, shouldn't be measurable user difference, but some
of the agregate flags for few dependency graph components did
change.
Fixes T58632: Particle don't update rotation settings
This changes a bit how the userprefs solid lights works. They are not
visible until enabling the "Edit Solid Light" checkbox. Once enabled the
current studiolight used for solid mode will be overwritten.
Once the lighting settings are tweaked, the user can click the
"Save as Studio light" button to save the current settings.
This makes it easy to create new lighting without messing the other
presets.
The studio lights are stored as ASCII files on the disk using a dead
simple custom format.
The UI/UX is not perfect and will be improved in other commits.
Also includes:
* Separate LookDev HDRI selection from Solid Lights
* Hide LookDev HDRIs from the Solid Lights selection list
In 2.79 hiding works in paint modes with selection enabled,
so it is a missing feature. This implements it in texture
paint overlays and in workbench base shading.
Reviewers: fclem
Differential Revision: https://developer.blender.org/D3989
* Less Lengthy enum/macro names.
* Optimize computation of Spherical Harmonics.
* Reduce radiance cubemap size a bit. Higher resolution is not necessary.
* Remove STUDIOLIGHT_LIGHT_DIRECTION_CALCULATED (was not used).
* Do windowing on each component separately instead of using luminance.
* Use ITER_PIXELS to iterate on each pixels, using pixel center coords.
* Remove gpu_matcap_3components as it is only needed when creating the gputex.
* Fix a lot of confusion in axis denomination/swizzle.
These changes should not affect functionallity.
The crash only occurs with Intel 3rd generation GPUs.
It occurs because the program needs to be used at least once in the opengl context in which it is created.
This setting can be tweaked to improve glossy reflection cubemaps.
It increases the sample count for each roughness level.
This settings affect the lookdev mode quality as well.
This enables reducing the noise comming from very bright light sources
(like a sun) that can be found in distant HDRIs.
The lost energy may be replaced manually by a sunlight that compensate the
this loss.
This clamping only concerns Reflection Cubmaps and is done on all on all
of them.
Setting to 0.0 disables it (default).
This is a parameter that will make the interpolation between irradiance
cells of a same Irradiance Volume smoother, reducing the weight of the
light leaking correction factors.
It is usefull in some cases to avoid harsh lighting transition that can
happen when a sample point it near a surface.
This is an important change. Starting from now, all lights have a finite
influence radius (similar to the old sphere option for BI).
In order to avoid costly setup time, this distance is first computed
automatically based on a light threshold. The distance is computed
at the light origin and using the inverse square falloff. The setting
can be found inside the render settings panel > shadow tab.
This light threshold does not take the light shape into account an may not
suit every case. That's why we provide a per lamp override where you can
just set the cutt off distance (Light Properties Panel > Light >
Custom Distance).
The influence distance is also used as shadow far clip distance.
This influence distance does not concerns sun lights that still have a
far clip distance.
---
This change is important because it makes it possible to cull lights
an improve performance drastically in the future.
