* Space: volume density and step size in object or world space
* Step Size: override automatic step size
* Clipping: values below this are ignored for tighter volume bounds
The last two are Cycles only currently.
Ref T73201
This patch contains the work that I did during my week at the Code Quest - adding support for tiled images to Blender.
With this patch, images now contain a list of tiles. By default, this just contains one tile, but if the source type is set to Tiled, the user can add additional tiles. When acquiring an ImBuf, the tile to be loaded is specified in the ImageUser.
Therefore, code that is not yet aware of tiles will just access the default tile as usual.
The filenames of the additional tiles are derived from the original filename according to the UDIM naming scheme - the filename contains an index that is calculated as (1001 + 10*<y coordinate of the tile> + <x coordinate of the tile>), where the x coordinate never goes above 9.
Internally, the various tiles are stored in a cache just like sequences. When acquired for the first time, the code will try to load the corresponding file from disk. Alternatively, a new operator can be used to initialize the tile similar to the New Image operator.
The following features are supported so far:
- Automatic detection and loading of all tiles when opening the first tile (1001)
- Saving all tiles
- Adding and removing tiles
- Filling tiles with generated images
- Drawing all tiles in the Image Editor
- Viewing a tiled grid even if no image is selected
- Rendering tiled images in Eevee
- Rendering tiled images in Cycles (in SVM mode)
- Automatically skipping loading of unused tiles in Cycles
- 2D texture painting (also across tiles)
- 3D texture painting (also across tiles, only limitation: individual faces can not cross tile borders)
- Assigning custom labels to individual tiles (drawn in the Image Editor instead of the ID)
- Different resolutions between tiles
There still are some missing features that will be added later (see T72390):
- Workbench engine support
- Packing/Unpacking support
- Baking support
- Cycles OSL support
- many other Blender features that rely on images
Thanks to Brecht for the review and to all who tested the intermediate versions!
Differential Revision: https://developer.blender.org/D3509
This patch stitches the vertices along patch edges so that cracks can
no longer form when applying subdivision or displacement a mesh.
Subpatches are now formed in a way that ensures vertex indices along
subpatch edges are equal for adjacent subpatches. A mapping of vertices
along patch edges is built to preform stitching. Overall performance is
roughly the same, some gains were made in splitting, but some was lost
in stitching.
This fixes:
- T49049 (cracks between patches from material and uv seams)
- T49048 (discontinuous normals with true displacement)
Reviewers: sergey, brecht
Differential Revision: https://developer.blender.org/D3692
This could happen e.g. when changing smoke type from flow to domain or
connecting a volume shader with to a domain without an actual flow type
around.
Fixes T58569, T68359
Reviewers: brecht
Maniphest Tasks: T58569, T68359
Differential Revision: https://developer.blender.org/D5478
Gathers information about object geometry and textures. Very basic at
this moment, but need to start somewhere.
Things which needs to be included still:
- "Runtime" information, like BVH. While it is not directly controllable
by artists, it's still important to know.
- Device array sizes. Again, not under artists control, but is added to
the overall size.
- Memory peak at different synchronization stages.
At this point it simply prints info to the stdout after F12 is done,
need better control over that too.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D3566
around the volume.
We generate a tight mesh around the active voxels of the volume in order
to effectively skip empty space, and start volume ray marching as close
to interesting volume data as possible. See code comments for details on
how the mesh generation algorithm works.
This gives up to 2x speedups in some scenes.
Reviewed by: brecht, dingto
Reviewers: #cycles
Subscribers: lvxejay, jtheninja, brecht
Differential Revision: https://developer.blender.org/D3038
This is fully unpredictable for artists when one damaged object makes the whole
scene to render incorrectly. This involves two main changes:
- It is not enough to check triangle bounds to be valid when building BVH.
This is because triangle might have some finite vertices and some non-finite.
- We shouldn't add non-finite triangle area to the overall area for MIS.
The idea is to make include statements more explicit and obvious where the
file is coming from, additionally reducing chance of wrong header being
picked up.
For example, it was not obvious whether bvh.h was refferring to builder
or traversal, whenter node.h is a generic graph node or a shader node
and cases like that.
Surely this might look obvious for the active developers, but after some
time of not touching the code it becomes less obvious where file is coming
from.
This was briefly mentioned in T50824 and seems @brecht is fine with such
explicitness, but need to agree with all active developers before committing
this.
Please note that this patch is lacking changes related on GPU/OpenCL
support. This will be solved if/when we all agree this is a good idea to move
forward.
Reviewers: brecht, lukasstockner97, maiself, nirved, dingto, juicyfruit, swerner
Reviewed By: lukasstockner97, maiself, nirved, dingto
Subscribers: brecht
Differential Revision: https://developer.blender.org/D2586
Also fixed some issues with motion keys calculation:
- Clamp lower and upper limits of curves so we can safely call those
functions for the very first and very last curve segment.
- Fixed wrong indexing for the curve radius array.
- Fixed wrong motion attribute offset calculation.
By calling `tessellate()` from the mesh manager in Cycles we can do pre/post
processing or even threaded tessellation without concerning client side code
with the details.
Displacement is now a per material setting, which means old files will have to
be updated if they had used displacement. Cool side effect of this change is
material previews now show displacement.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2140
Enables Catmull-Clark subdivision meshes with support for creases and attribute
subdivision. Still waiting on OpenSubdiv to fully support face varying
interpolation for subdividing uv coordinates tho. Also there may be some
inconsistencies with Blender's subdivision which will be resolved at a
later time.
Code for reading patch tables and creating patch maps is borrowed
from OpenSubdiv.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2111
Subdivision options can now be found in the subsurf modifier. The modifier must
be the last in the stack or the options will be unavailable. Catmull-Clark
subdivision is still unavailable and will fallback to linear subdivision instead
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2109
This adds support for ngons and attributes on subdivision meshes. Ngons are
needed for proper attribute interpolation as well as correct Catmull-Clark
subdivision. Several changes are made to achieve this:
- new primitive `SubdFace` added to `Mesh`
- 3 more textures are used to store info on patches from subd meshes
- Blender export uses loop interface instead of tessface for subd meshes
- `Attribute` class is updated with a simplified way to pass primitive counts
around and to support ngons.
- extra points for ngons are generated for O(1) attribute interpolation
- curves are temporally disabled on subd meshes to avoid various bugs with
implementation
- old unneeded code is removed from `subd/`
- various fixes and improvements
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D2108
This is a bit weak, but better than tagging whole mesh manager for update.
Maybe we'll solve such dual-look up in the future.
This commit finally solves T48963: Noise when changing Diffuse node to Emission node
This is a special builder type which is allowed to orient nodes to
strands direction, hence minimizing their surface area in comparison
with axis-aligned nodes. Such nodes are much more efficient for hair
rendering.
Implementation of BVH builder is based on Embree, and generally idea
there is to calculate axis-aligned SAH and oriented SAH and if SAH
of oriented node is smaller than axis-aligned SAH we create unaligned
node.
We store both aligned and unaligned nodes in the same tree (which
seems to be different from what Embree is doing) so we don't have
any any extra calculations needed to set up hair ray for BVH
traversal, hence avoiding any possible negative effect of this new
BVH nodes type.
This new builder is currently not in use, still need to make BVH
traversal code aware of unaligned nodes.
There are several internal changes for this:
First idea is to make __tri_verts to behave similar to __tri_storage,
meaning, __tri_verts array now contains all vertices of all triangles
instead of just mesh vertices. This saves some lookup when reading
triangle coordinates in functions like triangle_normal().
In order to make it efficient needed to store global triangle offset
somewhere. So no __tri_vindex.w contains a global triangle index which
can be used to read triangle vertices.
Additionally, the order of vertices in that array is aligned with
primitives from BVH. This is needed to keep cache as much coherent as
possible for BVH traversal. This causes some extra tricks needed to
fill the array in and deal with True Displacement but those trickery
is fully required to prevent noticeable slowdown.
Next idea was to use this __tri_verts instead of __tri_storage in
intersection code. Unfortunately, this is quite tricky to do without
noticeable speed loss. Mainly this loss is caused by extra lookup
happening to access vertex coordinate.
Fortunately, tricks here and there (i,e, some types changes to avoid
casts which are not really coming for free) reduces those losses to
an acceptable level. So now they are within couple of percent only,
On a positive site we've achieved:
- Few percent of memory save with triangle-only scenes. Actual save
in this case is close to size of all vertices.
On a more fine-subdivided scenes this benefit might become more
obvious.
- Huge memory save of hairy scenes. For example, on koro.blend
there is about 20% memory save. Similar figure for bunny.blend.
This memory save was the main goal of this commit to move forward
with Hair BVH which required more memory per BVH node. So while
this sounds exciting, this memory optimization will become invisible
by upcoming Hair BVH work.
But again on a positive side, we can add an option to NOT use Hair
BVH and then we'll have same-ish render times as we've got currently
but will have this 20% memory benefit on hairy scenes.
- add_vertex() can be called from split_vertex() which does not guarantee
to have properly pre-allocate arrays.
- Need to check whether Cycles is compiled with OSL in XML reader.
This commit makes it so casting subsurface rays will totally ignore all
the BVH nodes and primitives which do not belong to a current object,
making it much simpler traversal code and reduces number of intersection
tests.
Reviewers: brecht, juicyfruit, dingto, lukasstockner97
Differential Revision: https://developer.blender.org/D1823
Basically the idea is to make code robust against extending
enum options in the future by falling back to a known safe
default setting when RNA is set to something unknown.
While this approach solves the issues similar to T47377,
but it wouldn't really help when/if any of the RNA values
gets ever deprecated and removed. There'll be no simple
solution to that apart from defining explicit mapping from
RNA value to Cycles one.
Another part which isn't so great actually is that we now
have to have some enum guards and give some explicit values
to the enum items, but we can live with that perhaps.
Reviewers: dingto, juicyfruit, lukasstockner97, brecht
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D1785
This way memory overhead caused by the BVH building is not so visible and peak
memory usage will be reduced.
Implementing this idea is not so straightforward actually, because we need to
synchronize images used for true displacement before meshes. Detecting whether
image is used for true displacement is not so striaghtforward, so for now all
all displacement types will synchronize images used for them.
Such change brings memory usage from 4.1G to 4.0G with the 01_01_01_D scene
from gooseberry. With 01_01_01_G scene it's 7.6G vs. 6.8G (before and after
the patch).
Reviewers: campbellbarton, juicyfruit, brecht
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D1217
Issue was caused by wrong order of scene device update, which could
lead to missing object flags in shader kernel.
This patch solves a bit more than that making sure objects flags are
always properly updated, so adding/removing volume BSDF will properly
reflect on viewport where camera might become being in volume and so.
