This commit renames enums related the "Curve" object type and ID type
to add `_LEGACY` to the end. The idea is to make our aspirations clearer
in the code and to avoid ambiguities between `CURVE` and `CURVES`.
Ref T95355
To summarize for the record, the plans are:
- In the short/medium term, replace the `Curve` object data type with
`Curves`
- In the longer term (no immediate plans), use a proper data block for
3D text and surfaces.
Differential Revision: https://developer.blender.org/D14114
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This is similar to e032ca2e25 which removed the
callback for volumes. Now that we have geometry sets, there is
no need to define a callback for every data type, and this wasn't
used. Procedural curves/hair editing will use nodes rather than new
modifier types anyway.
As described in T91186, this commit moves mesh vertex normals into a
contiguous array of float vectors in a custom data layer, how face
normals are currently stored.
The main interface is documented in `BKE_mesh.h`. Vertex and face
normals are now calculated on-demand and cached, retrieved with an
"ensure" function. Since the logical state of a mesh is now "has
normals when necessary", they can be retrieved from a `const` mesh.
The goal is to use on-demand calculation for all derived data, but
leave room for eager calculation for performance purposes (modifier
evaluation is threaded, but viewport data generation is not).
**Benefits**
This moves us closer to a SoA approach rather than the current AoS
paradigm. Accessing a contiguous `float3` is much more efficient than
retrieving data from a larger struct. The memory requirements for
accessing only normals or vertex locations are smaller, and at the
cost of more memory usage for just normals, they now don't have to
be converted between float and short, which also simplifies code
In the future, the remaining items can be removed from `MVert`,
leaving only `float3`, which has similar benefits (see T93602).
Removing the combination of derived and original data makes it
conceptually simpler to only calculate normals when necessary.
This is especially important now that we have more opportunities
for temporary meshes in geometry nodes.
**Performance**
In addition to the theoretical future performance improvements by
making `MVert == float3`, I've done some basic performance testing
on this patch directly. The data is fairly rough, but it gives an idea
about where things stand generally.
- Mesh line primitive 4m Verts: 1.16x faster (36 -> 31 ms),
showing that accessing just `MVert` is now more efficient.
- Spring Splash Screen: 1.03-1.06 -> 1.06-1.11 FPS, a very slight
change that at least shows there is no regression.
- Sprite Fright Snail Smoosh: 3.30-3.40 -> 3.42-3.50 FPS, a small
but observable speedup.
- Set Position Node with Scaled Normal: 1.36x faster (53 -> 39 ms),
shows that using normals in geometry nodes is faster.
- Normal Calculation 1.6m Vert Cube: 1.19x faster (25 -> 21 ms),
shows that calculating normals is slightly faster now.
- File Size of 1.6m Vert Cube: 1.03x smaller (214.7 -> 208.4 MB),
Normals are not saved in files, which can help with large meshes.
As for memory usage, it may be slightly more in some cases, but
I didn't observe any difference in the production files I tested.
**Tests**
Some modifiers and cycles test results need to be updated with this
commit, for two reasons:
- The subdivision surface modifier is not responsible for calculating
normals anymore. In master, the modifier creates different normals
than the result of the `Mesh` normal calculation, so this is a bug
fix.
- There are small differences in the results of some modifiers that
use normals because they are not converted to and from `short`
anymore.
**Future improvements**
- Remove `ModifierTypeInfo::dependsOnNormals`. Code in each modifier
already retrieves normals if they are needed anyway.
- Copy normals as part of a better CoW system for attributes.
- Make more areas use lazy instead of eager normal calculation.
- Remove `BKE_mesh_normals_tag_dirty` in more places since that is
now the default state of a new mesh.
- Possibly apply a similar change to derived face corner normals.
Differential Revision: https://developer.blender.org/D12770
The array modifier does not necessarily tag normals dirty.
If it doesnt, normals are recalculated "internally" using the offset ob
transform. This was happening for the array items, but not for the caps.
Now do the same thing for caps.
Maniphest Tasks: T94422
Differential Revision: https://developer.blender.org/D13681
This allows us to remove a callback from the modifier type info struct.
In the future the these modifiers might just be replaced by nodes
internally anyway, but in the meantime it's nice to unify the handling
of evaluated geometry a bit.
Differential Revision: https://developer.blender.org/D11080
The issue was that where_on_path uses a resampled curve to get the data
from the curve. This leads to disconnects between the curve the user
sees and the evaluated location data.
To fix this we simply use the actual curve data the user can see.
The older code needed a cleanup either way as there were hacks in other
parts of the code trying to work around some brokenness. This is now
fixed and we no longer need to clamp the evaluation range to 0-1 or make
helper functions to make it do what we actually want.
Reviewed By: Campbell, Sybren
Differential Revision: http://developer.blender.org/D10898
Since the initial merge of the geometry nodes project, the modifyPointCloud
function already was already modifying a geometry set. The function wasn't
renamed back then, because then the merge would have touched many
more files.
Ref T83357.
This commit uses an enum to access expansion for specific panels for
each modifier, constraint, etc. Even though these values are quite simple,
this can help make the code more explicit when the ui_expand_flag is
accessed directly. Also update comments about this bitfield to make
them consistent.
This removes `foreachObjectLink` from `ModifierTypeInfo`, `GpencilModifierTypeInfo`
and `ShaderFxTypeInfo`. There is no need to have both, `foreachObjectLink` and `foreachIDLink`.
There is not code that actually depends on `foreachObjectLink`.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D9078
As noted in T80164, there are quite a few area of Blender where the
"Reset to Default Value" operator in button context menus doesn't work.
Modifiers are one of them, because the DNA defaults system was never
set up for them.
Additionally, this should make modifier versioning easier. Whenever a
new field is added it should be automatically initialized to the
default value.
I had to make some ordering changes in the following modifiers to work
around an error with `-Wsign-conversion` in the macros:
- Solidify Modifier
- Corrective Smooth Modifier
- Screw Modifier
Some modifiers are special cases and are skipped in this commit:
- Data Transfer Modifier
- Cloth Modifier
- Fluid Modifier
- Softbody Modifier
Differential Revision: https://developer.blender.org/D8747
This reduces the number of places that have to be modified
when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D9000
With this change `outliner_draw.c` does not have to be
edited anymore when a new modifier is added.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8998
For modifier shortcuts we added a "custom_data" field to panels.
This commit uses the same system for accessing the list data that
corresponds to each panel. This way the context is only used once
and the modifier for each panel can be accessed more easily later.
This ends up being mostly a cleanup commit with a few small changes
in interface_panel.c. The large changes in the UI functions are due
to the fact that the panel custom data is now passed around as a
single pointer instead of being created again for every panel.
The list_index variable in Panel.runtime is removed as it's now
unnecessary.
Differential Revision: https://developer.blender.org/D8559
These changes are smaller, made based on feedback and a pass on all
the layouts for clarity and consistency. The Multires modifier UI will
be addressed in a separate patch. Here is an overview of the changes:
Renaming Options:
- Build: "Start" -> "Start Frame"
- Curve: "From Radius" -> "Size from Radius"
- Screw: "Calc Order" -> "Calculate Order"
- Displace, Warp, Wave: "Texture Coordinates Object" -> "Object"
Move Mode Toggle to Top & Expand:
- Bevel, Boolean, Normal Edit, Subdivision
Use Columns for Tighter Spacing:
- Displace, Explode, Ocean, Particle Instance, Remesh, Shrinkwrap,
Solidify, Warp, Weighted Normal, Wave
Misc:
- Bevel: Set inactive properties for vertex bevel
- Mesh Sequence Cache: Remove box for cache file
- Skin: Don't align "Mark Loose" and "Clear Loose"
- Array: Expand relative offset subpanel by default
- Array: Move start cap, end cap to a new subpanel
- Bevel: Move width type above width
Differential Revision: https://developer.blender.org/D8115
This is part of a greater blenloader decentralization effort (T76372).
For modifiers the goal is that fewer files have to be modified when
a new modifier is added.
This patch just adds the `blendWrite` and `blendRead` callbacks to
`ModifierTypeInfo` but does not change any other code yet. In the next
steps, modifier specific code will be moved from `writefile.c` and
`readfile.c` into their corresponding `MOD_*` files.
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
There is no user visible difference in standard builds, as there are no
volume modifiers yet. When using WITH_NEW_OBJECT_TYPES some deform only
modifiers are now available for hair and pointcloud objects.
Differential Revision: https://developer.blender.org/D7141
Was happening when object transform is animated.
Caused by overly aggressive dependency construction introduced a
while back in 9d4129eee6: we shouldn't add dependencies unless
we really need them.
This change removes unneeded transform dependency for cap objects
(since only their geometry is used), and also removes own transform
dependency if there is no offset object (which is the only case when
own transform is needed).
Differential Revision: https://developer.blender.org/D6184
This is a continuation of rB39f005eae8eed8b939579aff8c9a05a4f50e5e38
Now all the fields where we check for object type in RNA (like
rna_Curve_object_poll) will have a safe guard for when this isn't the
case. For example when loading files that has missing object libraries
and all missing objects are replaced with empties (placeholders).
Reviewed By: Brecht
Differential Revision: http://developer.blender.org/D5425
This was wrong and violating design to force modifiers to query
evaluated objects and IDs. It is up to the caller to make sure
the object is properly evaluatable.
Effectively, reverting changes from de491abf99 (and possibly
other related changes).
The general idea of this change is to have a runtime data pointer
in the ModifierData, so it can be preserved through copy-on-write
updates by the dependency graph.
This is where subdivision surface modifier can store its topology
cache, so it is not getting trashed on every copy-on-write which
is happening when moving a vertex.
Similar mechanism should be used by multiresolution, dynamic paint
and some other modifiers which cache evaluated data.
This fixes T61746.
Thing to keep in mind, that there are more reports about slow
subdivision surface in the tracker, but that boils down to the
fact that those have a lot of extraordinary vertices, and hence
a lot slower to evaluated topology.
Other thing is, this speeds up oeprations which doesn't change
topology (i.e. moving vertices).
Reviewers: brecht
Reviewed By: brecht
Maniphest Tasks: T61746
Differential Revision: https://developer.blender.org/D4541
This is what modifiers are to use to indicate that they depend
on a transformation of the object itself.
Currently should be no functional changes, but in the future
this will allow to easily change transform operation depending
on whether there is a simulation associated with the object.
`BKE_modifier_get_evaluated_mesh_from_evaluated_object()` used by
modifiers needing access to other objects' geometry probably skipped out
of the radar when cage and final evaluated meshes were added to
BMEditMesh? In any case, we do not need to duplicate (and then free!) a
temp mesh from editdata anymore, and we can even add instead a parameter
to get cage instead of final. Also makes modifiers code a bit simpler.
BF-admins agree to remove header information that isn't useful,
to reduce noise.
- BEGIN/END license blocks
Developers should add non license comments as separate comment blocks.
No need for separator text.
- Contributors
This is often invalid, outdated or misleading
especially when splitting files.
It's more useful to git-blame to find out who has developed the code.
See P901 for script to perform these edits.
