Our beloved shapekeys are 'virtual' overrides, they need special
snowflake treatment here as well.
They do not have any override data, from override perspective they are
considered as mere sub-data from their owning ID (mesh, lattice, etc.).
Therefore, we should not copy override data from them, but instead
properly flag those new IDs as `LIB_EMBEDDED_DATA_LIB_OVERRIDE`.
Found while investigating T84373.
Our beloved shapekeys are 'virtual' overrides, they need special
snowflake treatment here as well.
They do not have any override data, from override perspective they are
considered as mere sub-data from their owning ID (mesh, lattice, etc.).
Therefore, we should not copy override data from them, but instead
properly flag those new IDs as `LIB_EMBEDDED_DATA_LIB_OVERRIDE`.
Found while investigating T84373.
This commit adds the ability to provide a default value to
`attribute_try_get_for_output` and uses it for the `Point Scale` node,
which is important because the node uses multiplication.
The idea is to keep "name-specific" functionality in nodes rather than in
the attribute API, otherwise the complexity will be hard to keep track of.
So this fix doesn't apply to the Attribute Vector Math node, but hopfully
that is okay since that's now a lower level node for this purpose anyway.
Differential Revision: https://developer.blender.org/D10115
If the mesh has any corner or point attributes (e.g. vertex weights or
uv maps), those attributes will now be available on the generated points
as well.
Other domains can be supported as well. I just did not implement those yet,
because we don't have a use case for them.
Differential Revision: https://developer.blender.org/D10114
For term consistency with usage.
The clarity is more for consistency with the nla domain() processing
function names and the core struct member name it stores the results
in, "valid". The name "domain", which implies a function can operate
on it, seems more natural than "valid", which implies something is
wrong if false.
No functional changes.
Reviewed by: sybren
Differential Revision: http://developer.blender.org/D9692
The field will already be properly written to in (anim_sys.c)
nla_eval_domain_action(). It's easier to understand the property's
usage after removing the redundancy.
No functional changes.
Reviewed by: ChrisLend, sybren
Differential Revision: http://developer.blender.org/D9689
No functional changes.
Future patches {D8867} {D8296} make use of it.
Reviewed by: sybren, ChrisLend
Differential Revision: http://developer.blender.org/D9691
No intended functional changes.
Refactors animsys_evaluate_nla() into 2 versions:
animsys_evaluate_nla_for_keyframing(), animsys_evaluate_nla_for_flush()
to make it clear what data is being calculated and why.
Dummy strip creation has been refactored to two separate functions,
animsys_create_tweak_strip() and animsys_create_action_track_strip().
Both are evaluated differently from other strips and eachother. There's
no need to interweave them. A future patch D8296, generally requires
both strips.
___
XXX anim_sys.c) nlatrack_find_tweaked() is a temporary work around.
If anyone has any insight into this problem, help is appreciated.
Reviewed by: sybren
Differential Revision: http://developer.blender.org/D9696
Note that uv layers still can't be accessed with nodes, because those
only access attributes on the point domain currently, while uv data
is stored per corner. Implicit domain conversion hasn't been
implemented yet.
This fixes the behavior of some nodes when the same attribute
name is used for input and output. If both attributes have a
different type, they can't exist at the same time. Therefore,
the input attribute has to be removed in order to create the
output attribute.
Previously, the input attribute was remove before it was used
in any computations. Now, the output is written to a temporary
buffer and only later saved in the geometry component. This
allows both attributes to coexist within the node.
The temporary attribute is only create when necessary. The
normal case without name collisions still works the same
as before.
Differential Revision: https://developer.blender.org/D10109
Ref T83793.
Now the resolution can be reduced to get less details. This is very useful for doing storyboards to get a quick fill of any character.
Following UI review, the name "Resolution" has been changed to "Precision" because is more clear.
Differential Revision: https://developer.blender.org/D10076
When the multiframe is enabled, playing animation must be disabled or the animation is not visible,
{F9527854}
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D9930
The green is still distinct from the more turquoise use for geometry, and
they are never used in the same node graph. The use of red makes sense, but
would need changes to other sockets and categories to set it apart well.
Ref T82689
The translate node moves every point in the geometry, and the scale
node multiplies the "scale" attribute of the input geometry by its input.
While these operations are already possible with the "Attribute" nodes,
these new nodes fit nicely with the nodes specifically for changing the
"rotation" attribute that already exist, and they provide a simpler way
to do the same thing.
Differential Revision: https://developer.blender.org/D10100
This commit adds the "Save as Render" feature to the file output node,
that allows to disable the application of the configured view transform
and other color management settings on the image. If disable it uses
the standard view transform instead. This feature was originally
suggested in T83842 and is part of the color management improvements
task in T68926. With this feature it is possible to toggle the
application of the color management settings for each input socket
of the File Output node individually.
Reviewed By: brecht
Maniphest Tasks: T68926, T83842
Differential Revision: https://developer.blender.org/D9921
This change will try to add meta data when using a multilayered open
exr file output node in the compositor. It adds the current scene meta
data and converts existing cryptomatte keys so it follows the
naming that is configured in the file output node.
This change supports the basic use-case where the compositor is
used to output cryptomatte layers with a different naming scheme to
support external compositors. In this case the Multilayered OpenEXR
files are used and the meta data is read from the render result.
Meta data is found when render layer node is connected with the
file output node without any other nodes in between. Redirects and empty
node groups are allowed.
The patch has been verified to work with external compositors.
See https://devtalk.blender.org/t/making-sense-of-cryptomatte-usage-in-third-party-programs/16576/17
See patch for example files.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D10016
This adds a new Align Rotation to Vector node based on the mockup
in T83669.
Reviewers: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10081
Previously, the span returned by `WriteAttribute`s might not contain the
current value of the attribute for performance reasons. To avoid some
bugs, the span now always contains the old values (they might have to
be copied over from the internal storage, dependending on how the
attribute is stored).
The old behavior is still available with the `get_span_for_write_only`
method. The span that it returns might not contain the current
attribute values. Therefore, it should only be used when you want
to overwrite an attribute without looking at the old values.
When painting using Auto-Normalize or Lock Relative with some
groups locked, the locked weights may not add up precisely to
1 because of precision limitations, which results in creating
nonzero weights close to FLT_EPSILON. With Lock Relative display
mode this is very obvious and annoying (random red points amid
black or blue), so add an epsilon check to consider less than
1e-6 unlocked weight to be the same as 0.
In addition, in cases when no weight can be painted due to locks,
don't create vertex group entries at all if they don't exist yet.
Also, don't run Auto Normalize when not painting a deform group.
Differential Revision: https://developer.blender.org/D10000
* Simplify and clarify logic in `BKE_undosys_step_undo/redo_with_data_ex`,
by adding early return on invalid situations, renaming some variables,
and adding comments.
* Add more sanity checks in those functions.
No behavioral change are expected here, besides in potential edge-case,
invalid situations.
This is a preliminary change, before some deeper modifications of
`BKE_undosys` undo/redo API.
Differential Revision: https://developer.blender.org/D10033
This patch implements the same operations and interface as the regular
vector math node, but it runs for every element of the attribute. This
should expand what's possible with geometry nodes quite a bit.
Differential Revision: https://developer.blender.org/D9914
Root of the issue is that `BKE_object_eval_boundbox` (that ports back
evaluated bbox to orig object during active depsgraph evaluation) is
only called when object's geometry actually is evaluated.
However, with new undo, often Object itself can be changed by undo,
without requiring its geometry to be re-evaluated, which was leading to
the evaluated bbox not being copied back into orig object anymore.
Fixing that by moving bbox copying-to-orig code into
`BKE_object_sync_to_original` instead, which is always executed when
object is evaluated (as hinted by the comment above
`BKE_object_eval_boundbox` actually).
Also allows to cleanup code for armature eval, apparently.
Maniphest Tasks: T83422
Differential Revision: https://developer.blender.org/D9789
This can be useful as a workaround on the boundary with the pinned
vertices in some situations among other things, and completely copies
the existing design of the self collision vertex group setting.
Differential Revision: https://developer.blender.org/D10043
The `object.collision.use` flag was treated as a redundant marker
of the existence of the modifier, going as far as adding/removing
it when the value was changed, which is not actually very useful.
Removing the modifier loses its position in the stack, and requires
a dependency graph rebuild. It feels it may be a legacy flag?
What would be useful however is the ability to toggle collisions
dynamically without removing the modifier. This patch adjusts the
code to keep the modifier when the flag is disabled, and add it
if it doesn't exist when the flag is enabled. The modifier now
checks the flag at the start and quickly exits after cleaning
up stale data. The redesigned setting is exposed in the UI.
Collisions can't be disabled by simply using the modifier enable
flags because the modifier merely saves a snapshot of the mesh at
a certain point of the modifier stack for other objects to use,
and thus has to be able to clear the stale data.
Differential Revision: https://developer.blender.org/D10064
Previous code would not generate a session uuid for embedded IDs (like
root node trees or master collections). While this is not a problem
currently since those are not directly stored in Main data-base, this is
conceptually wrong, since those IDs still pertain the Main data.
Further more, this is blocking using `session_uuid` more in depsgraph in
place from ID pointer itself, as identifier (related to T84397).
No ID (even remotely) related to Main database should ever be created
directly through MEM_mallocN. Using `BKE_libblock_alloc` is the bare
minimum.
Note that there is no behavior change expected here.
Previously, it was only forbidden to delete the last scene. This can
lead to the situation where a .blend file only contains linked scenes.
This is problematic, because linked data might not always be available
or can be removed from a .blend file without having an additional check
for remaining scenes.
Now there always has to be at least one local scene.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D10049
Currently such triangles are effectively already excluded, because
the calculated forces are not applied to pinned vertices. However
these forces are still being computed, which is inefficient.
This adds an early check for triangles where all vertices are
pinned during BVH overlap detection, which significantly speeds
up certain use cases with big fully pinned areas that happen to
overlap a collider. In case of self collision both triangles must
be fully pinned to exclude safely, because the computation is
symmetric and handles two triangles at the same time.
Differential Revision: https://developer.blender.org/D10041
Adjust default cache settings for all files to store raw and final
images.
All settings are still available when developer extras option is
enabled in user preferences.
This is part of design task T80278
Differential Revision: https://developer.blender.org/D9745
Instances are created with an "index" parameter used for persistence over
time through animation. Currently the geometry nodes instancer passes
the index in the array for this value, but the arrays created by the
"Point Distribution" node aren't necessarily stable in this way when
the input mesh is deformed. In D9832 we already mostly solved this
problem with an `id` attribute. The solution here is to create instances
with this attribute as well.
It's important to note that deforming the instanced points *after*
distribution will usually be a better solution for this problem. This
solution is likely still important though.
Differential Revision: https://developer.blender.org/D10024
