Change snapping behavior to snap strip edges when they are close to snap point.
Default behavior is, that each transformed strip is snapped to any other strip.
Implement snapping controls in sequencer tool settings. These controls include:
- Snapping on/off
- Ability to snap to playhead and strip hold offset points
- Filter snap points by excluding sound or muted strips
- Control snapping distance
Snapping controls are placed in timeline header similar to 3D viewport
Reviewed By: mano-wii
Differential Revision: https://developer.blender.org/D11646
Use lookup string callback function for `sequences_all` RNA property
`rna_SequenceEditor_sequences_all_lookup_string` using a GHash for faster lookups.
When names are changed or strips are added/removed the lookup is tagged invalid.
The next time the lookup is used it will rebuild it.
Reviewed By: sergey, jbakker
Differential Revision: https://developer.blender.org/D11544
Remove unused flag `SEQ_DUPE_ANIM` and code used by this flag.
Remove flag `SEQ_DUPE_CONTEXT` and refactor code, to split operator
logic from duplication code.
Reduce indentation level in for loop.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11318
Tool settings for sequencer were not initialized, which caused crash
when adding strips.
There was fix for same issue in versioning rB0f81dafe6cec, but
subversion was not bumped, so files with uninitialized tool settings
may still exist.
Add `SEQ_tool_settings_get()` accessor function that will initialize
tool settings if they are missing. Change operator code to use
`SEQ_tool_settings_fit_method_get()` function instead of accessing
tool settings directly
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11383
Move low level logic to module code and versioning logic to versioning code.
Metas strip position was handled in diffrent way compared to other strips.
This was introduced in c8b0d25794 as bugfix for T28158.
I disagree with such design. Meta strips should be handled in same way as
any other strips.
I have tested this change and haven't found any problems.
No problems after checking T28158 as well.
There should be no functional changes on user level.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D9972
Adjust default cache settings for all files to store raw and final
images.
All settings are still available when developer extras option is
enabled in user preferences.
This is part of design task T80278
Differential Revision: https://developer.blender.org/D9745
New UUID was generated for original strip not new one.
Bug caused "invisible" sound strip playing that is impossible to
remove. Especially noticable when transforming pasted strips. In such
case, file reload was necessary.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D9912
This value was meant to be used for keeping images that are slowest to
render in cache. Method of measurement was flawed, because it doesn't
take UI overhead into consideration.
Cache panel is to be removed because users should not have to tweak
settings like this. It is not useful for development either, therefore
it is removed completely.
Crash on null dereference in `SEQ_timeline_boundbox()`. This function was
generalized in rB9e4a4c2e996c to work on arbitrary `seqbase`.
Fixed by refactoring `SEQ_timeline_boundbox()` functions to return default
sane values if `seqbase` is `NULL`
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D9878
This commit resolves problem introduced in e1665c3d31 - it was
difficult to import media at their original resolution.
This is done by using original resolution as reference for scale.
All crop and strip transform values and their animation is converted
form old files.
To make both workflows easy to use, sequencer tool settings have been
created with preset for preffered scaling method. This setting is in
sequencer timeline header and add image or movie strip operator
properties.
Two new operators have been added:
`sequencer.strip_transform_fit` operator with 3 options: Scale To Fit,
Scale to Fill and Stretch To Fill.
Operator can fail if strip image or video is not loaded currently, this
case should be either sanitized or data loaded on demand.
`sequencer.strip_transform_clear` operator with 4 options:
Clear position, scale, rotation and all (previous 3 options combined).
Reviewed By: sergey, fsiddi
Differential Revision: https://developer.blender.org/D9582
Move most functions into separate files.
File sequencer.c is reserved for alloc, free and duplicating functions.
There should be no functional changes.
Remove `static int clear_scene_in_allseqs_fn(...)`. It was a utility
function for `BKE_sequencer_clear_scene_in_allseqs()`, which was removed
in c063813c30.
No functional changes.
Variables renaned:
- cfra -> timeline_frame
- nr -> frame index
- cfra_over -> overlap_frame
Function seq_give_stripelem_index was renamed to seq_give_frame_index.
Move functions closely related to rendering images and proxies into
render.c and proxy.c files. render.h and proxy.h are created for
functions used internally.
There should be no functional changes.
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
This patch changes behavior of strip transform and crop feature.
Purpose of this change is to allow display arbitrary portion of input
image, simplify user interface and workflow.
Offset and Crop values in old files are converted in versioning.
Offset animation is also converted. Crop animation and animation of
crop or offset enable properties is not taken into account
Changes in behavior and interface:
- If image is added to timeline it is scaled to fit inside preview area
while maintaining aspect ratio. Image is centered. This is considered
as a baseline for further transformation.
- Scale and rotation was added, so it is possible to transform image at
it's original resolution.
- Crop will not affect image transformation (does not move image).
- Values of Crop and Transform Position are in pixels, these values are
corrected if preview is fraction of project resolution.
- Transform and Mirror panel has been removed and new Transform panel
and Crop panel is moved to Adjust panel. Mirror is now part of new
Transform panel.
Technical changes:
- Preprocessing stage must work on duplicated image, because original is
cached. Previously Crop and Offset could run at once and required only
one duplication of image. This is not the case with new algorithms, so
duplication on demand is implemented. Transformation can read original
image and will output new image that is safe to modify. It should be
possible to add crop step to transform algorithm, so that Crop won't
require previous duplication though.
- Use Crop and Use Translation checkboxes were removed. Individual
values are compared to default values to check if image needs to be
processed. In case of transform this will be done also if resolution of
source.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8393
Intern definitions are moved to sequencer/intern/sequencer.h
BKE_sequencer.h was also cleaned up a bit to make sure that functions
and structs are in correct category.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9259
Recursion happens in case when scene strip point to it's own scene
indirectly by using SEQ_SCENE_STRIPS option.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9264
Corrects incorrect usages of the word 'loose' when 'lose' was required.
Differential Revision: https://developer.blender.org/D9243
Reviewed by Campbell Barton
Corrects incorrect usage of contraction for 'it is', when possessive 'its' was required.
Differential Revision: https://developer.blender.org/D9250
Reviewed by Campbell Barton
This was caused by canceling operator if strip has more than 0 inputs.
Logic should be reversed - cancel only if strip has 0 inputs.
BKE_sequencer_render_loop_check() arguments had to be sanitized because
seq_effect_find_selected() can set seq1,2,3 to NULL
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D9197
Generic ID management code can now do those local temp copy handling, so
no need for duplicated own code for that.
No behavioral changes expected here.
This is first step of refactoring task T77580.
Next step will be breaking up files into smaller ones.
Reviewed By: sergey, brecht
Differential Revision: https://developer.blender.org/D8492
