This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
When changing the material while the properties editor temporarily isn't
visible (e.g. because another editor is in full-screen or a different
workspace is active), the preview wouldn't be updated on changes.
Always trigger a material preview update on screen layout or editor type
changes.
This adds a notification type for shaderfx so the properties editor can
be properly notified to redraw.
Another possible solution would be to also redraw the shaderfx tab
with a ND_MODIFIER update, but this solution allows us to avoid
some unecessary redraws too. There were no existing cases of
ND_OBJECT | NC_MODIFIER updates, so those cases were
removed from buttons_area_listener.
Differential Revision: https://developer.blender.org/D8159
This replaces the cmake options `WITH_NEW_OBJECT_TYPES` and
`WITH_NEW_SIMULATION_TYPE` with two experimental userpref settings:
* `use_new_particle_system`: Enables the point cloud type and the simulation editor.
* `use_new_hair_type`: Only displays the add-operator in the add menu for now.
Note, in the current state you can't do anything productive with the new particle
system or the new hair type. Features will be added step by step in the upcoming
weeks and months.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8096
This patch implements the list panel system D7490 for grease pencil
shader effects. It also moves their drawing to a callback in
ShaderFxTypeInfo in line with the extensible architecture refactoring
goal T75724.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (@mendio) for helping to develop the layout
changes.
Differential Revision: https://developer.blender.org/D7985
This patch implements the list panel system D7490 for grease pencil
modifiers. It also moves their drawing to a callback in
GpencilModifierTypeInfo in line with the extensible architecture
refactoring goal T75724.
This also adds the "set_error" function for grease pencil modifiers,
which hadn't been copied from mesh modifiers yet.
The implementation is basically exactly the same as for the modifier
patch (9b099c8612).
Thanks to Matias Mendiola (mendio) for providing mockups for many
of the layout changes.
Differential Revision: https://developer.blender.org/D7978
This patch implements the list panel system D7490 for modifiers.
It also moves modifier drawing to a callback in ModifierTypeInfo
in line with the extensible architecture refactoring goal T75724.
This adds a PanelRegister callback and utilities for registering
panels and subpanels. It also adds the callbacks for expansion saving
and drag and drop reordering described in D7490.
These utilities, callbacks, and other common UI elements shared
between modifiers live in MOD_ui_common.c.
Because modifier buttons are now in panels, we can make use of
subpanels for organization. The UI layouts also use the single
column layout style consistently used elsewhere in Blender.
Additionally, the mode-setting buttons are aligned and ordered
consistently with the outliner.
However, the large number of UI changes in this patch may mean
that additional polishing is required in master.
Thanks to William Reynish (@billreynish) who did a fair amount of the
layout work and to Julian Eisel (@Severin) for consistent help.
Differential Revision: https://developer.blender.org/D7498
- uiTemplateID: Straightforward, just const for the template
and the functions it calls
- uiTemplateCacheFile: Create a function in rna_ui.c because
the generated RNA callback doesn't have const context.
Differential Revision: https://developer.blender.org/D7895
Due to recent changes clicks in the node editor would trigger a
depsgraph update resulting in too many redraws. This patch limits
the updates to when workbench shown in texture mode in any visible
screen.
There are still cases where too many updates are created. For example when
there are a Cycles render viewport and a Workbench texture viewport on the
same screen.
This fix is meant as a workaround. The actual fix should add a mechanism
to the depsgraph and the viewports should check if they need to be redrawn.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D7830
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
Follow up of b2ee1770d4 and 10c2254d41, part of T74432.
Now the area and region naming conventions should be less confusing.
Mostly a careful batch rename but had to do few smaller fixes.
Also ran clang-format on affected files.
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
Since changing the active particle system uses NC_OBJECT | ND_DRAW
for 'RNA_def_property_update()' we need to redraw/refresh
BCONTEXT_PARTICLE in 'buttons_area_listener()' as well.
Maniphest Tasks: T67654
Differential Revision: https://developer.blender.org/D6702
A collection of smaller changes that are required in the /blender/source files. A lot of them are also due to variable renaming.
Reviewed By: sergey
Maniphest Tasks: T59995
Differential Revision: https://developer.blender.org/D3855
We have no dedicated image context tab, so for now making sure we don't
end up passing its ID as the pinned one.
If we ever get one, we then will need a different solution here, like
changing the ID that owns the data to be the object, instead of the
empty image datablock.
Differential Revision: https://developer.blender.org/D6273
setting/clearing render region uses ND_RENDER_OPTIONS notifier, but
listener was only refreshing RENDER and VIEWLAYER tabs in that case,
whereas the render region buttons are located in OUTPUT tab.
Reviewers: billreynish
Maniphest Tasks: T69522
Differential Revision: https://developer.blender.org/D5685
The old layout of `PointerRNA` was confusing for historic reasons:
```
typedef struct PointerRNA {
struct {
void *data;
} id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
This patch updates it to:
```
typedef struct PointerRNA {
struct ID *owner_id;
struct StructRNA *type;
void *data;
} PointerRNA;
```
Throughout the code base `id.data` was replaced with `owner_id`.
Furthermore, many explicit pointer type casts were added which
were implicit before. Some type casts to `ID *` were removed.
Reviewers: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D5558
This adds NA_SELECTED to notifier when selecting Grease Pencil layers so Properties Editor will update
Differential Revision: https://developer.blender.org/D5073
Reviewed by Dalai Felinto
Cheap tip: anything that is not "Camel Case" and/or that is more than
a few words long should use `TIP_` translation, not `IFACE_` one.
Also added several missing strings (including the one reported in D5056
by Jean First (@robbott), thanks).
Internally tool settings have been moved to the 3D view.
Added the ability for to draw panels from another space/region
so they can be mirrored in the properties editor.
No functional change, this adds LIB definition and args to cmake files.
Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS'
since there are many platforms/configurations that could break when
changing linking order.
Manually add and enable WITHOUT_SORTED_LIBS to try building
without sorted libs (currently fails since all variables are empty).
This check will eventually be removed.
See T46725.
The UI was trying to use screen_context.c for its poll and draw
functions. So the active object and active object data and active layer
was used in the UI, instead of the context one.
Besides, for the material, the wrong context path was used altogether
when the active object was a greasepencil.
This would lead to all sort of pinning problems:
* A Mesh panel is pinned, but the active object is a grease pencil, the
grease pencil panels would show.
* If a Grease Pencil (data) panel is pinned, but the active object is not
the one pinned, nothing would show.
* Material panels and pinning were totally broken, showing the material
context for pinned mesh data panels even.
I also sanitized the name of the panels, their inheritance and poll
functions.
Reviewers: antoniov, brecht
Subscribers: billrey
Differential Revision: https://developer.blender.org/D4470
