Please never, ever use same DNA var for two different things. Even worse
if they do not have same type and ranges!
This is only ensuring issues (as described in report, but also if
animating both RNA props using same DNA var... yuck).
And we were not even saving any byte in DNA, could reuse some padding
there to store the two new needed vars (yes, two, since we cannot re-use
existing one if we want to keep backward *and* forward compatibility).
I didn't manage to get the proper object context in the collection
properties editor. That said I got it working for now in a temporary way
since this will change once we get workspaces anyways
(see changes in buttons_context.c and
rna_scene.c::rna_LayerCollection_mode_settings_get)
I still need to handle the merging of the settings. I will find a
provisory solution while we wait for depsgraph.
(also layer_collection_create_mode_settings_object and layer_collection_create_mode_settings_edit could probably be elsewhere - under draw/engines likely)
Every time:
* A collection settings is set
* A collection visibility changes
* An object is added/removed/ ...
We need to recalculate the "accumulated" CollectionEngineSettings that
the render engine should use for an object.
This is to be handled by the depsgraph. Meanwhile this code should allow
us to start using those settings in the render engines.
Note: We are storing this in the objects, which means we can only have
one active calculated option every time.
This is intended to get the conversation with the Depsgraph department
going.
Initial work by Clément Foucault with contributions from Dalai Felinto
(mainly per-collection engine settings logic, and depsgraph iterator placeholder).
This makes Blender require OpenGL 3.3. Which means Intel graphic card
and OSX will break. Disable CLAY_ENGINE in CMake in those cases.
This is a prototype render engine intended to help the design of real
render engines. This is mainly an engine with enphasis in matcap and
ambient occlusion.
Implemented Features
--------------------
* Clay Render Engine, following the new API, to be used as reference for
future engines
* A more complete Matcap customization with more options
* Per-Collection render engine settings
* New Ground Truth AO - not enabled
Missing Features
----------------
* Finish object edit mode
- Fix shaders to use new matrix
- Fix artifacts when edge does off screen
- Fix depth issue
- Selection sillhouette
- Mesh wires
- Use mesh normals (for higher quality matcap)
- Non-Mesh objects drawing
- Widget drawing
- Performance issues
* Finish mesh edit mode
- Derived-Mesh-less edit mode API (mesh_rende.c)
* General edit mode
- Per-collection edit mode settings
* General engines
- Per-collection engine settings
(they are their, but they still need to be flushed by depsgraph, and
used by the drawing code)
Design Documents
----------------
* https://wiki.blender.org/index.php/Dev:2.8/Source/Layers
* https://wiki.blender.org/index.php/Dev:2.8/Source/DataDesignRevised
User Commit Log
---------------
* New Layer and Collection system to replace render layers and viewport layers.
* A layer is a set of collections of objects (and their drawing options) required for specific tasks.
* A collection is a set of objects, equivalent of the old layers in Blender. A collection can be shared across multiple layers.
* All Scenes have a master collection that all other collections are children of.
* New collection "context" tab (in Properties Editor)
* New temporary viewport "collections" panel to control per-collection
visibility
Missing User Features
---------------------
* Collection "Filter"
Option to add objects based on their names
* Collection Manager operators
The existing buttons are placeholders
* Collection Manager drawing
The editor main region is empty
* Collection Override
* Per-Collection engine settings
This will come as a separate commit, as part of the clay-engine branch
Dev Commit Log
--------------
* New DNA file (DNA_layer_types.h) with the new structs
We are replacing Base by a new extended Base while keeping it backward
compatible with some legacy settings (i.e., lay, flag_legacy).
Renamed all Base to BaseLegacy to make it clear the areas of code that
still need to be converted
Note: manual changes were required on - deg_builder_nodes.h, rna_object.c, KX_Light.cpp
* Unittesting for main syncronization requirements
- read, write, add/copy/remove objects, copy scene, collection
link/unlinking, context)
* New Editor: Collection Manager
Based on patch by Julian Eisel
This is extracted from the layer-manager branch. With the following changes:
- Renamed references of layer manager to collections manager
- I doesn't include the editors/space_collections/ draw and util files
- The drawing code itself will be implemented separately by Julian
* Base / Object:
A little note about them. Original Blender code would try to keep them
in sync through the code, juggling flags back and forth. This will now
be handled by Depsgraph, keeping Object and Bases more separated
throughout the non-rendering code.
Scene.base is being cleared in doversion, and the old viewport drawing
code was poorly converted to use the new bases while the new viewport
code doesn't get merged and replace the old one.
Python API Changes
------------------
```
- scene.layers
+ # no longer exists
- scene.objects
+ scene.scene_layers.active.objects
- scene.objects.active
+ scene.render_layers.active.objects.active
- bpy.context.scene.objects.link()
+ bpy.context.scene_collection.objects.link()
- bpy_extras.object_utils.object_data_add(context, obdata, operator=None, use_active_layer=True, name=None)
+ bpy_extras.object_utils.object_data_add(context, obdata, operator=None, name=None)
- bpy.context.object.select
+ bpy.context.object.select = True
+ bpy.context.object.select = False
+ bpy.context.object.select_get()
+ bpy.context.object.select_set(action='SELECT')
+ bpy.context.object.select_set(action='DESELECT')
-AddObjectHelper.layers
+ # no longer exists
```
This commit introduces the ability to use the Robert Penner easing equations
or a Custom Curve to control the way that the "Interpolate Sequence" operator
interpolates between keyframes. Previously, it was only possible to get linear
interpolation between the gp frames.
Workflow:
1) Place current frame between a pair of GP keyframes
2) Open the "Interpolate" panel in the Toolshelf
3) Choose the interpolation type (under "Sequence Options")
4) Adjust settings (e.g. if you're using "Custom Curve", use the curvemap widget
to define the way that the interpolation proceeds)
5) Click "Sequence" to interpolate
6) Play back/scrub the animation to see if you've got the result you want
7) If you need to make some tweaks, undo, or delete the generated keyframes,
then repeat the process again from step 4 until you've got the desired result.
This reverts commit 5aa19be912 and b4a721af69.
Due to postponement of particle system rewrite it was decided to put particle code
back into the 2.8 branch for the time being.
Basically all this does is drawing layout previews into the opened layout search menu.
https://youtu.be/RHYWtZP7pyA
The previews are drawn using offscreen rendering so they can't use multi-threading (yet!). But that shouldn't be an issue since only a handful of previews are drawn at the same time. Normally we only need to redraw the preview if a screen layout was changed. Would be nice if PreviewImage could store if it supports threaded rendering.
Previews are saved in files, might be useful if you later want to support appending layouts.
Adds a new file screen_draw.c.
Forward compatibility code should never, ever be run during undo saving.
Note: related to T49991 (but does not fix it either, crash now happens
when doing a real file save...).
This is yet another debug option that allows to render an arbitrary
simulation field by using a color ramp to inspect its voxel values.
Note that when using this, fire rendering is turned off.
Reviewers: plasmasolutions, gottfried
Differential Revision: https://developer.blender.org/D1733
Regression caused rBbcc863993ad, write code was assuming dw->ob was always valid,
wich is no more the case right after reading file e.g.
Another good example of how bad it is to use 'hidden' dependencies between datablocks. :(
And another fix to be backported to 2.78a. :(((
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
Since SDNA was allocated for each undo step,
the new address meant it was considered different and included again.
Add an option not to duplicate the DNA string when calling DNA_sdna_from_data,
as well as avoiding a redundant copy, it writes the same address each time.
