This was necessary when attributes were stored embedded in legacy
structs like `MPoly`. Nowadays that isn't the case anymore, and there
doesn't seem to be a reason to restrict the creation of attributes.
update_on_change_ shouldn't be called when creating an attribute but
not setting the array values. In that case it is UB to not set the values
elsewhere anyway, and that will cause its own update tag.
4d0936c7d7 explicitly avoids turning non-geometry object
instances into geometry instances. This code is called to prepare
geometry sets for baking, and baking currently assumes that the baked
instances are always geometry sets.
To fix this, just check the instance type and serialize an empty
geometry set for the crashing object instance case. Compared to before
the crash causing commit, there is no change in behavior, since that
would have created empty geometry sets too.
Pull Request: blender/blender#119892
All builtin attributes are now stored as named attributes, so the old
code path from where they were stored with non-generic types can be
removed. The stored type and attribute type don't have to be tracked
separately anymore either.
The change to use generic "capture field on geometry" utilities for this
node and other nodes like it means `AttributeWriter` with its update
tagging isn't being used anymore, the attribute is just being created
with the new values (for some cases anyway). To fix this, call the
attribute provider's update function when creating the attribute too.
This was noted as useful in 130701763b too.
The initialization of curve and point cloud runtime structs is moved
because they now have to be allocated before any attributes are added.
The same random number was used when sampling from the volume segment
and from the direct scattering position, causing correlation issues with
light tree.
To solve this problem, we ensure the same light is picked for
volume segment/direct scattering, equiangular/distance sampling by
sampling the light tree only once in volume segment. From the direct
scattering position in volume, we sample a position on the picked light
as usual. If sampling from the light tree fails, we continue with
indirect scattering.
For unbiased MIS weight for forward sampling, we retrieve the `P`, `D`
and `t` used in volume segment for traversing the light tree.
The main changes are:
1. `light_tree_sample()` and `light_distribution_sample()` now only pick
lights. Sampling a position on light is done separately via
`light_sample()`.
2. `light_tree_sample()` is now only called only once from volume
segment. For direct lighting we call `light_sample()`.
3. `light_tree_pdf()` now has a template `<in_volume_segment>`.
4. A new field `emitter_id` is added to struct `LightSample`, which just
stores the picked emitter index.
5. Additional field `previous_dt = ray->tmax - ray->tmin` is added to
`state->ray`, because we need this quantity for computing the pdf.
6. Distant/Background lights are also picked by light tree in volume
segment now, because we have no way to pick them afterwards. The direct
sample event for these lights will be handled by
`VOLUME_SAMPLE_DISTANCE`.
7. Original paper suggests to use the maximal importance, this results
in very poor sampling probability for distant and point lights therefore
excessive noise. We have a minimal importance for surface to balance, we
could do the same for volume but I do not want to spend much time on
this now. Just doing `min_importance = 0.0f` seems to do the job
okayish. This way we still won't sample the light with zero
`max_importance`.
The current solution might perform worse with distance sampling, because
the light tree measure is biased towards equiangular sampling. However,
it is difficult to perform MIS between equiangular and distance sampling
if different lights are picked for each method. This is something we can
look into in the future if proved to be a serious regression.
Pull Request: blender/blender#119389
In the tiled compositor ensure_delta() can be called from multiple threads,
but without any threading synchronization. This worked fine when the node
only supported absolute transform: multiple threads would do the same work
and assign delta to the same values.
With the addition of relative transform in #115947 a code which adjusts
previously calculated delta was added, leading to possible double-applying
relative transform.
The solution is to avoid multiple threads modifying the same data by using
a double-locked check.
This issue does not happen in 4.2 (main branch) because it switched to full
frame compositor, which works differently.
Pull Request: blender/blender#119883
Previously, the bake settings in geometry nodes were not
editable even though they were stored on the overridden
object (instead of the not-overridden but linked node tree).
Pull Request: blender/blender#119874
USD files are now findable from the cachefile.open() and
cachefile.layer_add() operators. Removed the ".abc" appending when
looking for a file for the first time, as it no longer makes sense.
Pull Request: blender/blender#118685
When using light linking with the light tree, the root index of a
mesh light subtree can be 0. The current code assumed this wasn't
possible, and as such it caused rendering issues, specifically the
incorrect computation of the PDF of certain mesh lights during
forward path tracing.
So we adjust the code to allow mesh light subtree root node
indices of 0.
This was worked on by Alaska, Sergey, and Weizhen
Pull Request: blender/blender#119770
This patch ports the GLSL SMAA library to the CPU compositor in order to
unify the anti-aliasing behavior between the CPU and GPU compositor.
Additionally, the SMAA texture generator was removed since it is now
unused.
Previously, we used an external C++ library for SMAA anti-aliasing,
which is itself a port of the GLSL SMAA library. However, the code
structure and results of the library were different, which made it quite
difficult to match results between CPU and GPU, hence the decision to
port the library ourselves.
The port was performed through a complete copy of the library to C++,
retaining the same function and variable names, even if they are
different from Blender's naming conversions. The necessary code changes
were done to make it work in C++, including manually doing swizzling
which changes the code structure a bit.
Even after porting the library, there were still major differences
between CPU and GPU, due to different arithmetic precision. To fix this
some of the bilinear samplers used in branches and selections were
carefully changed to use point samplers to avoid discontinuities around
branches, also resulting in a nice performance improvement. Some slight
differences still exist due to different bilinear interpolation, but
they shall be looked into later once we have a baseline implementation.
The new implementation is slower than the existing implementation, most
likely due to the liberal use of bilinear interpolation, since it is
quite cheap on GPUs and the code even does more work to use bilinear
interpolation to avoid multiple texture fetches, except this causes a
slow down on CPUs. Some of those were alleviated as mentioned in the
previous section, but we can probably look into optimizing it further.
Pull Request: blender/blender#119414
This patch unifies the sRGB to Linear color space conversion between the
CPU and GPU compositors. This is because CPU uses an optimized path that
produces values that are very slightly off. To fix this, for the GPU, we
do the conversion CPU side instead of doing it in a shader. Since images
are cached, the performance implications are not significant.
Another added benefit is that we no longer get differences due to the
order of alpha pre-multiplication and sRGB conversion, demonstrated in
#114305. And we no longer require any preprocessing of the images.
This patch adds some new utilities to the Image Buffer module to assign
float, byte, and compressed buffers along with their color spaces. It
also adds an ownership flag to compressed data. Those were added as a
way to facilitate the implementation.
Pull Request: blender/blender#118624
`asset_lib` is null when calling undo in active file browser space.
This causes crash in `asset undo poll`. So exit out of the poll function
when active file space is filebrowser.
Pull Request: blender/blender#119870
object_index is not found (-1) when all mesh data is deleted hence it
crashes when accessing base from the vector at index -1.
So skip the further execution to prevent crash.
Pull Request: blender/blender#119865
Since the `Set Snap Base` feature has been implemented, it would be
convenient to reflect the use of the term `Snap Base` in other areas in
the UI.
Pull Request: blender/blender#119723
By restricting the sample range along the ray to the valid segment.
Supports
**Mesh Light**
- [x] restrict the ray segment to the side with MIS
**Area Light**
- [x] when the spread is zero, find the intersection of the ray and the bounding box/cylinder of the rectangle/ellipse area light beam
- [x] when the spread is non-zero, find the intersection of the ray and the minimal enclosing cone of the area light beam
*note the result is also unbiased when we just consider the cone from the sampled point in volume segment. Far away from the light source it's less noisy than the current solution, but near the light source it's much noisier. We have to restrict the sample region on the area light to the part that lits the ray then, I haven't tried yet to see if it would be less noisy.*
**Point Light**
- [x] the complete ray segment should be valid.
**Spot Light**
- [x] intersect the ray with the spot light cone
- [x] support non-zero radius
Pull Request: blender/blender#119438
Resolve a glitch where the window contents didn't fit the window
on startup under GNOME. This also avoids flickering whenever the
window manager changed the window size from the requested size.
See code-comments for details.
Noticed lack of it via #119793. Now DDS images using BC1/BC2/BC3
(aka DXT1/DXT3/DXT5) formats can keep on being GPU compressed
on Metal too, just like e.g. on OpenGL.
Pull Request: blender/blender#119835
Running a very simple files when Blender is built with the
WITH_COMPILER_ASAN=ON and WITH_CYCLES_KERNEL_ASAN=ON CMake options
leads to ASAN reporting an unknown-crash at line where the worker
pool is being filled in.
It is not entirely clear if it is a real issue in the code, since
placing debug prints with `this` address report proper addresses,
however there is no harm on capturing `this` pointer by value and
it does solve the ASAN reporting issues.
It is possible to reproduce the ASAN crash with the following steps:
- Start with --factory-startup
- Enable Metal device in User Preferences
- Switch render device to GPU Compute
- Switch viewport more to Rendered
Pull Request: blender/blender#119867
This commit fixes the following assert:
mtl_command_buffer.mm:165, submit(), at 'MTLBackend::get()->is_inside_render_boundary()'
It happens when toggling rendered state of viewport on macOS, and is
caused by incorrect order of setting active GPU context to null and
calling GPU_render_end.
This change makes the flow of GPU_render_{beign, end} and GPU context
activation closer to what it is in the draw manager's functions
DRW_render_context_{enable, disable}.
Pull Request: blender/blender#119868
Change label from "Add Child Collection" to "Add Bone Collection", as the
newly added collection becomes a sibling, not a child, of the active one.
Pull Request: blender/blender#119845
Fix the "Merge Vertices" report, replacing "vertice(s)" with either
"vertex" or "vertices". The singular "vertice" is not a word in English,
and thus the regular "append (s)" approach is incorrect.
Pull Request: blender/blender#119863
Change label from "Add Child Collection" to "Add Bone Collection", as the
newly added collection becomes a sibling, not a child, of the active one.
Pull Request: blender/blender#119845
