intern/cycles/integrator/render_scheduler.cpp

@@ -899,8 +899,8 @@ int RenderScheduler::get_num_samples_during_navigation(int resolution_divider) c
   /* Schedule samples equal to the resolution divider up to a maximum of 4.
    * The idea is to have enough information on the screen by increasing the sample count as the
    * resolution is decreased. */
-  /* NOTE: Changeing this formula will change the formula in
+  /* NOTE: Changing this formula will change the formula in
-   * "RenderScheduler::calculate_resolution_divider_for_time()"*/
+   * `RenderScheduler::calculate_resolution_divider_for_time()`. */
   return min(max(1, resolution_divider / pixel_size_), 4);
 }
 
@@ -1177,18 +1177,18 @@ int RenderScheduler::calculate_resolution_divider_for_time(double desired_time,
 {
   const double ratio_between_times = actual_time / desired_time;
 
-  /* We can pass "ratio_between_times" to "get_num_samples_during_navigation()" to get our
+  /* We can pass `ratio_between_times` to `get_num_samples_during_navigation()` to get our
    * navigation samples because the equation for calculating the resolution divider is as follows:
-   * "actual_time / desired_time = sqr(resolution_divider) / sample_count".
+   * `actual_time / desired_time = sqr(resolution_divider) / sample_count`.
-   * While "resolution_divider" is less than or equal to 4, "resolution_divider = sample_count"
+   * While `resolution_divider` is less than or equal to 4, `resolution_divider = sample_count`
-   * (This relationship is determined in "get_num_samples_during_navigation()"). With some
+   * (This relationship is determined in `get_num_samples_during_navigation()`). With some
-   * substitution we end up with "actual_time / desired_time = resolution_divider" while the
+   * substitution we end up with `actual_time / desired_time = resolution_divider` while the
    * resolution divider is less than or equal to 4. Once the resolution divider increases above 4,
-   * the relationsip of "actual_time / desired_time = resolution_divider" is no longer true,
+   * the relationship of `actual_time / desired_time = resolution_divider` is no longer true,
-   * however the sample count retrieved from "get_num_samples_during_navigation()" is still
+   * however the sample count retrieved from `get_num_samples_during_navigation()` is still
    * accurate if we continue using this assumption. It should be noted that the interaction between
-   * pixel_size, sample count, and resolution divider are automatically accounted for and that's
+   * `pixel_size`, sample count, and resolution divider are automatically accounted for and that's
-   * why pixel_size isn't included in any of the equations. */
+   * why `pixel_size` isn't included in any of the equations. */
   const int navigation_samples = get_num_samples_during_navigation(
       ceil_to_int(ratio_between_times));
 

source/blender/blenkernel/intern/rigidbody.c

@@ -1704,7 +1704,7 @@ static void rigidbody_update_sim_ob(Depsgraph *depsgraph, Object *ob, RigidBodyO
     }
   }
 
-  /* Make transformed objects temporarily kinmatic
+  /* Make transformed objects temporarily kinematic
    * so that they can be moved by the user during simulation. */
   if (is_selected && (G.moving & G_TRANSFORM_OBJ)) {
     RB_body_set_kinematic_state(rbo->shared->physics_object, true);

source/blender/bmesh/intern/bmesh_mesh_convert.cc

@@ -1166,7 +1166,7 @@ void BM_mesh_bm_to_me(Main *bmain, BMesh *bm, Mesh *me, const struct BMeshToMesh
         &bm->ldata, CD_PROP_BOOL, BKE_uv_map_pin_name_get(layer_name, sub_layer_name));
 
     /* If ever the uv map associated bool layers become optional in BMesh as well (like in Mesh)
-     * this assert needs to be removed. For now it is a bug if they doin't exist. */
+     * this assert needs to be removed. For now it is a bug if they don't exist. */
     BLI_assert(vertsel_layer_index >= 0 && edgesel_layer_index >= 0 && pin_layer_index >= 0);
 
     int vertsel_offset = vertsel_layer_index >= 0 ? bm->ldata.layers[vertsel_layer_index].offset :

source/blender/bmesh/intern/bmesh_walkers_impl.c

@@ -1197,8 +1197,8 @@ static void bmw_FaceLoopWalker_begin(BMWalker *walker, void *data)
 {
   BMwFaceLoopWalker *lwalk, owalk, *owalk_pt;
   BMEdge *e = data;
-  /* BMesh *bm = walker->bm; */             /* UNUSED */
+  // BMesh *bm = walker->bm;              /* UNUSED */
-  /* int fcount = BM_edge_face_count(e); */ /* UNUSED */
+  // int fcount = BM_edge_face_count(e);  /* UNUSED */
 
   if (!bmw_FaceLoopWalker_edge_begins_loop(walker, e)) {
     return;

source/blender/bmesh/operators/bmo_inset.c

@@ -1183,7 +1183,7 @@ void bmo_inset_region_exec(BMesh *bm, BMOperator *op)
     f = BM_face_create_verts(bm, varr, j, es->l->f, BM_CREATE_NOP, true);
     BMO_face_flag_enable(bm, f, ELE_NEW);
 
-    /* Copy for loop data, otherwise UVs and vcols are no good.
+    /* Copy for loop data, otherwise UVs and vertex-colors are no good.
      * tiny speedup here we could be more clever and copy from known adjacent data
      * also - we could attempt to interpolate the loop data,
      * this would be much slower but more useful too. */

source/blender/editors/armature/armature_skinning.c

@@ -401,9 +401,9 @@ static void add_verts_to_dgroups(ReportList *reports,
     vertsfilled = 1;
   }
   else if (BKE_modifiers_findby_type(ob, eModifierType_Subsurf)) {
-    /* is subsurf on? Lets use the verts on the limit surface then.
+    /* Is subdivision-surface on? Lets use the verts on the limit surface then.
      * = same amount of vertices as mesh, but vertices  moved to the
-     * subsurfed position, like for 'optimal'. */
+     * subdivision-surfaced position, like for 'optimal'. */
     subsurf_calculate_limit_positions(mesh, verts);
     vertsfilled = 1;
   }

source/blender/editors/gpencil/annotate_paint.c

@@ -528,7 +528,7 @@ static short annotation_stroke_addpoint(tGPsdata *p,
 
       /* store settings */
       copy_v2_v2(pt->m_xy, mval);
-      /* #44932 - Pressure vals are unreliable, so ignore for now */
+      /* Pressure values are unreliable, so ignore for now, see #44932. */
       pt->pressure = 1.0f;
       pt->strength = 1.0f;
       pt->time = (float)(curtime - p->inittime);
@@ -544,7 +544,7 @@ static short annotation_stroke_addpoint(tGPsdata *p,
 
       /* store settings */
       copy_v2_v2(pt->m_xy, mval);
-      /* #44932 - Pressure vals are unreliable, so ignore for now */
+      /* Pressure values are unreliable, so ignore for now, see #44932. */
       pt->pressure = 1.0f;
       pt->strength = 1.0f;
       pt->time = (float)(curtime - p->inittime);
@@ -620,7 +620,7 @@ static short annotation_stroke_addpoint(tGPsdata *p,
 
     /* store settings */
     copy_v2_v2(pt->m_xy, mval);
-    /* #44932 - Pressure vals are unreliable, so ignore for now */
+    /* Pressure values are unreliable, so ignore for now, see #44932. */
     pt->pressure = 1.0f;
     pt->strength = 1.0f;
     pt->time = (float)(curtime - p->inittime);

source/blender/editors/gpencil/gpencil_paint.c

@@ -764,7 +764,7 @@ static short gpencil_stroke_addpoint(tGPsdata *p,
 
       /* store settings */
       copy_v2_v2(pt->m_xy, mval);
-      /* #44932 - Pressure vals are unreliable, so ignore for now */
+      /* Pressure values are unreliable, so ignore for now, see #44932. */
       pt->pressure = 1.0f;
       pt->strength = 1.0f;
       pt->time = (float)(curtime - p->inittime);
@@ -780,7 +780,7 @@ static short gpencil_stroke_addpoint(tGPsdata *p,
 
       /* store settings */
       copy_v2_v2(pt->m_xy, mval);
-      /* #44932 - Pressure vals are unreliable, so ignore for now */
+      /* Pressure values are unreliable, so ignore for now, see #44932. */
       pt->pressure = 1.0f;
       pt->strength = 1.0f;
       pt->time = (float)(curtime - p->inittime);
@@ -3685,7 +3685,7 @@ static int gpencil_draw_modal(bContext *C, wmOperator *op, const wmEvent *event)
   }
 
   /* We don't pass on key events, GP is used with key-modifiers -
-   * prevents Dkey to insert drivers. */
+   * prevents D-key to insert drivers. */
   if (ISKEYBOARD(event->type)) {
     if (ELEM(event->type, EVT_LEFTARROWKEY, EVT_DOWNARROWKEY, EVT_RIGHTARROWKEY, EVT_UPARROWKEY)) {
       /* allow some keys:

source/blender/editors/sculpt_paint/sculpt_uv.c

@@ -50,83 +50,84 @@
 #define MARK_BOUNDARY 1
 
 typedef struct UvAdjacencyElement {
-  /* pointer to original uvelement */
+  /** pointer to original UV-element. */
   UvElement *element;
-  /* uv pointer for convenience. Caution, this points to the original UVs! */
+  /** UV pointer for convenience. Caution, this points to the original UVs! */
   float *uv;
-  /* Are we on locked in place? */
+  /** Are we on locked in place? */
   bool is_locked;
-  /* Are we on the boundary? */
+  /** Are we on the boundary? */
   bool is_boundary;
 } UvAdjacencyElement;
 
 typedef struct UvEdge {
   uint uv1;
   uint uv2;
-  /* Are we in the interior? */
+  /** Are we in the interior? */
   bool is_interior;
 } UvEdge;
 
 typedef struct UVInitialStrokeElement {
-  /* index to unique uv */
+  /** index to unique UV. */
   int uv;
 
-  /* strength of brush on initial position */
+  /** Strength of brush on initial position. */
   float strength;
 
-  /* initial uv position */
+  /** initial UV position. */
   float initial_uv[2];
 } UVInitialStrokeElement;
 
 typedef struct UVInitialStroke {
-  /* Initial Selection,for grab brushes for instance */
+  /** Initial Selection,for grab brushes for instance. */
   UVInitialStrokeElement *initialSelection;
 
-  /* Total initially selected UVs. */
+  /** Total initially selected UVs. */
   int totalInitialSelected;
 
-  /* initial mouse coordinates */
+  /** Initial mouse coordinates. */
   float init_coord[2];
 } UVInitialStroke;
 
-/* custom data for uv smoothing brush */
+/** Custom data for UV smoothing brush. */
 typedef struct UvSculptData {
-  /* Contains the first of each set of coincident UVs.
+  /**
-   * These will be used to perform smoothing on and propagate the changes
+   * Contains the first of each set of coincident UVs.
-   * to their coincident UVs */
+   * These will be used to perform smoothing on and propagate the changes to their coincident UVs.
+   */
   UvAdjacencyElement *uv;
 
-  /* Total number of unique UVs. */
+  /** Total number of unique UVs. */
   int totalUniqueUvs;
 
-  /* Edges used for adjacency info, used with laplacian smoothing */
+  /** Edges used for adjacency info, used with laplacian smoothing */
   UvEdge *uvedges;
 
-  /* Total number of #UvEdge. */
+  /** Total number of #UvEdge. */
   int totalUvEdges;
 
-  /* data for initial stroke, used by tools like grab */
+  /** data for initial stroke, used by tools like grab */
   UVInitialStroke *initial_stroke;
 
-  /* timer to be used for airbrush-type brush */
+  /** Timer to be used for airbrush-type brush. */
   wmTimer *timer;
 
-  /* to determine quickly adjacent UVs */
+  /** To determine quickly adjacent UVs. */
   UvElementMap *elementMap;
 
-  /* uvsmooth Paint for fast reference */
+  /** UV-smooth Paint for fast reference. */
   Paint *uvsculpt;
 
-  /* tool to use. duplicating here to change if modifier keys are pressed */
+  /** Tool to use. duplicating here to change if modifier keys are pressed. */
   char tool;
 
-  /* store invert flag here */
+  /** Store invert flag here. */
   char invert;
 
-  /* Is constrain to image bounds active? */
+  /** Is constrain to image bounds active? */
   bool constrain_to_bounds;
 
-  /* Base for constrain_to_bounds. */
+  /** Base for constrain_to_bounds. */
   float uv_base_offset[2];
 } UvSculptData;
 

source/blender/gpu/GPU_shader.h

@@ -249,8 +249,10 @@ typedef enum {
 } GPUUniformBuiltin;
 #define GPU_NUM_UNIFORMS (GPU_UNIFORM_SRGB_TRANSFORM + 1)
 
-/** TODO: To be moved as private API. Not really used outside of gpu_matrix.cc and doesn't really
+/**
- * offer a noticeable perf boost. */
+ * TODO: To be moved as private API. Not really used outside of gpu_matrix.cc and doesn't really
+ * offer a noticeable performance boost.
+ */
 int GPU_shader_get_builtin_uniform(GPUShader *shader, int builtin);
 
 /** DEPRECATED: Use hardcoded buffer location instead. */

source/blender/gpu/vulkan/vk_memory.hh

@@ -18,17 +18,17 @@ namespace blender::gpu {
 /**
  * `VK_ALLOCATION_CALLBACKS` initializes allocation callbacks for host allocations.
  * The macro creates a local static variable with the name `vk_allocation_callbacks`
- * that can be passed to vulkan API functions that expect
+ * that can be passed to VULKAN API functions that expect
  * `const VkAllocationCallbacks *pAllocator`.
  *
  * When Blender is compiled with `WITH_VULKAN_GUARDEDALLOC` this will use
  * `MEM_guardedalloc` for host allocations that the driver does on behalf
  * of blender. More internal allocations are still being allocated via the
- * implemention inside the vulkan device driver.
+ * implementation inside the VULKAN device driver.
  *
  * When `WITH_VULKAN_GUARDEDALLOC=Off` the memory allocation implemented
  * in the vulkan device driver is used for both internal and application
- * focussed memory operations.
+ * focused memory operations.
  */
 
 #ifdef WITH_VULKAN_GUARDEDALLOC

source/blender/makesdna/DNA_space_types.h

@@ -95,7 +95,8 @@ enum {
   /**
    * The space is not a regular one opened through the editor menu (for example) but spawned by an
    * operator to fulfill some task and then disappear again.
-   * Can typically be cancelled using Escape, but that is handled on the editor level. */
+   * Can typically be canceled using Escape, but that is handled on the editor level.
+   */
   SPACE_FLAG_TYPE_TEMPORARY = (1 << 0),
   /**
    * Used to mark a space as active but "overlapped" by temporary full-screen spaces. Without this
@@ -605,10 +606,13 @@ typedef struct SequencerTimelineOverlay {
 typedef enum eSpaceSeq_SequencerTimelineOverlay_Flag {
   SEQ_TIMELINE_SHOW_STRIP_OFFSETS = (1 << 1),
   SEQ_TIMELINE_SHOW_THUMBNAILS = (1 << 2),
-  SEQ_TIMELINE_SHOW_STRIP_COLOR_TAG = (1 << 3), /* use Sequence->color_tag */
+  /** Use #Sequence::color_tag */
+  SEQ_TIMELINE_SHOW_STRIP_COLOR_TAG = (1 << 3),
   SEQ_TIMELINE_SHOW_FCURVES = (1 << 5),
-  SEQ_TIMELINE_ALL_WAVEFORMS = (1 << 7), /* draw all waveforms */
+  /** Draw all wave-forms. */
-  SEQ_TIMELINE_NO_WAVEFORMS = (1 << 8),  /* draw no waveforms */
+  SEQ_TIMELINE_ALL_WAVEFORMS = (1 << 7),
+  /** Draw no wave-forms. */
+  SEQ_TIMELINE_NO_WAVEFORMS = (1 << 8),
   SEQ_TIMELINE_SHOW_STRIP_NAME = (1 << 14),
   SEQ_TIMELINE_SHOW_STRIP_SOURCE = (1 << 15),
   SEQ_TIMELINE_SHOW_STRIP_DURATION = (1 << 16),
@@ -978,7 +982,7 @@ enum eFileDetails {
   FILE_DETAILS_DATETIME = (1 << 1),
 };
 
-/* these values need to be hardcoded in structs, dna does not recognize defines */
+/* These values need to be hard-coded in structs, DNA does not recognize defines. */
 /* also defined in BKE */
 #define FILE_MAXDIR 768
 #define FILE_MAXFILE 256
@@ -1210,7 +1214,7 @@ typedef struct SpaceImage {
   struct Image *image;
   struct ImageUser iuser;
 
-  /** Histogram waveform and vectorscope. */
+  /** Histogram waveform and vector-scope. */
   struct Scopes scopes;
   /** Sample line histogram. */
   struct Histogram sample_line_hist;
@@ -1589,12 +1593,12 @@ typedef struct SpaceNode {
 
   /* tree type for the current node tree */
   char tree_idname[64];
-  /** Treetype: as same nodetree->type. */
+  /** Same as #bNodeTree::type (deprecated). */
   int treetype DNA_DEPRECATED;
 
-  /** Texfrom object, world or brush. */
+  /** Texture-from object, world or brush (#eSpaceNode_TexFrom). */
   short texfrom;
-  /** Shader from object or world. */
+  /** Shader from object or world (#eSpaceNode_ShaderFrom). */
   short shaderfrom;
 
   /** Grease-pencil data. */
@@ -1658,7 +1662,7 @@ typedef struct ConsoleLine {
   /* Keep these 3 vars so as to share free, realloc functions. */
   /** Allocated length. */
   int len_alloc;
-  /** Real len - strlen(). */
+  /** Real length: `strlen()`. */
   int len;
   char *line;
 
@@ -1671,7 +1675,8 @@ typedef struct ConsoleLine {
 typedef enum eConsoleLine_Type {
   CONSOLE_LINE_OUTPUT = 0,
   CONSOLE_LINE_INPUT = 1,
-  CONSOLE_LINE_INFO = 2, /* autocomp feedback */
+  /** Auto-completion feedback. */
+  CONSOLE_LINE_INFO = 2,
   CONSOLE_LINE_ERROR = 3,
 } eConsoleLine_Type;