archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
53d1dbbe5cfb79aa2bc904f12172fb5ab6363080
blender-archive/source/blender/windowmanager/wm.h

100 lines
3.1 KiB
C++
Raw Normal View History

doxygen: prevent GPL license block from being parsed as doxygen comment.
2011-02-23 10:52:22 +00:00
/*
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
* ***** BEGIN GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
* of the License, or (at your option) any later version.
Initial revision
2002-10-12 11:37:38 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Initial revision
2002-10-12 11:37:38 +00:00
*
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
* The Original Code is Copyright (C) 2007 Blender Foundation.
Initial revision
2002-10-12 11:37:38 +00:00
* All rights reserved.
*
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
*
* Contributor(s): Blender Foundation
Initial revision
2002-10-12 11:37:38 +00:00
*
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
* ***** END GPL LICENSE BLOCK *****
Initial revision
2002-10-12 11:37:38 +00:00
*/
doxygen: blender/windowmanager tagged.
2011-02-25 14:04:21 +00:00
/** \file blender/windowmanager/wm.h
* \ingroup wm
*/
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#ifndef __WM_H__
#define __WM_H__
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
2.5: gesture code in WM - Simplified and cleaned previous border code It was a bit too complex, too many data manipulations Original idea was to have WM API calls to manage border, circle, lines, lasso, etc. This now means that WM provides callbacks for custom operators, so it's very easy to make them. Check bottom of screen_edit.c for an example. Currently two borders were coded; with and without cross hair. Press Bkey in any area-region to test it (note: time window has wrong matrix!) Some specs to note: - gestures are in region space, and draw 'over'. That latter still needs some work when we do real composites. - only the active region is redrawn. - on todo is the generic gesture engine for 'tweak' or like how currently grab gestures in Blender work. These will be configurable per area-region, and WM then will send the proper "Gesture Event" with properties (N, S, E, W, etc) to which you then can assign operators. Such events will be generated with low priority, so other handlers who swallowed mouse events have preference.
2008-11-19 13:16:05 +00:00
struct wmWindow;
Auto Save Auto save is now working again in 2.5. It will also remember now what the location of the original file was when recovering it, so that library links still work and saving the restored file does not save to the temp directory. There is also a new Recover Auto Save operator which will open the filebrowser in the temp directory and show the auto saved .blends. Implemenation Notes: * Timer storage was moved from window to windowmanager, so we can have windowmanager level timers too now, doesn't make sense to have autosave timer attached to a particular window. * FileGlobal now has a filename field storing where the file was saved. Note that this is only used when loading a file through the recover operators, regular file read doesn't use it, so copying the quit.blend manually over the original file will still work as expected. * Jobs timer no longer uses operator now, this seems more like an internal thing, changing keymaps should not make it possible to break the jobs manager. * Autosave is postponed by 10 seconds when a modal operator is running, e.g. transform or file browsing. * Moved setting G.sce in setup_app_data before depsgraph updates, these can use the filename for pointcaches.
2009-10-20 13:58:53 +00:00
struct ReportList;
2.5: gesture code in WM - Simplified and cleaned previous border code It was a bit too complex, too many data manipulations Original idea was to have WM API calls to manage border, circle, lines, lasso, etc. This now means that WM provides callbacks for custom operators, so it's very easy to make them. Check bottom of screen_edit.c for an example. Currently two borders were coded; with and without cross hair. Press Bkey in any area-region to test it (note: time window has wrong matrix!) Some specs to note: - gestures are in region space, and draw 'over'. That latter still needs some work when we do real composites. - only the active region is redrawn. - on todo is the generic gesture engine for 'tweak' or like how currently grab gestures in Blender work. These will be configurable per area-region, and WM then will send the proper "Gesture Event" with properties (N, S, E, W, etc) to which you then can assign operators. Such events will be generated with low priority, so other handlers who swallowed mouse events have preference.
2008-11-19 13:16:05 +00:00
2.5 Vertex Paint back! Added WM level "paint cursor" system, which manages a custom painting cursor for tools or modes. - Activate it with WM_paint_cursor_activate(). That function wants two callbacks, a poll(C) to check whether there's a cursor in given context and ARegion, and a draw(C, x, y) which gets called when appropriate. - While paintcursor is active, the WM handles necessary redrawing events for all regions, also to nicely clear the cursor on region exit. - WM_paint_cursor_activate returns a handle, which you have to use to end the paint cursor. This handle also means you can register as many custom cursors as you want. At the moment, vertex paint mode registers only a mousemove handler, all other events are still normally handled. This is stuff for the future todo.
2009-01-09 13:55:45 +00:00
typedef struct wmPaintCursor {
struct wmPaintCursor *next, *prev;
Added back old sculptmode FKEY radial control. (Moved fullscreen to F11KEY for now.) Notes: * So far, only size mode ported and tested, still strength and rotation to do * Brought this back for sculptmode first, still to do are particle edit, vpaint, wpaint, texpaint, and I guess image paint? * Changed the wm paint cursor slightly, to take a customdata pointer. * Still need to bring back brush texture display in the cursor
2009-01-24 16:59:55 +00:00
void *customdata;
2.5 Vertex Paint back! Added WM level "paint cursor" system, which manages a custom painting cursor for tools or modes. - Activate it with WM_paint_cursor_activate(). That function wants two callbacks, a poll(C) to check whether there's a cursor in given context and ARegion, and a draw(C, x, y) which gets called when appropriate. - While paintcursor is active, the WM handles necessary redrawing events for all regions, also to nicely clear the cursor on region exit. - WM_paint_cursor_activate returns a handle, which you have to use to end the paint cursor. This handle also means you can register as many custom cursors as you want. At the moment, vertex paint mode registers only a mousemove handler, all other events are still normally handled. This is stuff for the future todo.
2009-01-09 13:55:45 +00:00
int (*poll)(struct bContext *C);
Added back old sculptmode FKEY radial control. (Moved fullscreen to F11KEY for now.) Notes: * So far, only size mode ported and tested, still strength and rotation to do * Brought this back for sculptmode first, still to do are particle edit, vpaint, wpaint, texpaint, and I guess image paint? * Changed the wm paint cursor slightly, to take a customdata pointer. * Still need to bring back brush texture display in the cursor
2009-01-24 16:59:55 +00:00
void (*draw)(bContext *C, int, int, void *customdata);
2.5 Vertex Paint back! Added WM level "paint cursor" system, which manages a custom painting cursor for tools or modes. - Activate it with WM_paint_cursor_activate(). That function wants two callbacks, a poll(C) to check whether there's a cursor in given context and ARegion, and a draw(C, x, y) which gets called when appropriate. - While paintcursor is active, the WM handles necessary redrawing events for all regions, also to nicely clear the cursor on region exit. - WM_paint_cursor_activate returns a handle, which you have to use to end the paint cursor. This handle also means you can register as many custom cursors as you want. At the moment, vertex paint mode registers only a mousemove handler, all other events are still normally handled. This is stuff for the future todo.
2009-01-09 13:55:45 +00:00
} wmPaintCursor;
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
extern void wm_close_and_free(bContext *C, wmWindowManager *);
extern void wm_close_and_free_all(bContext *C, ListBase *);
extern void wm_add_default(bContext *C);
* Updated blender 2.5 default setup Simplified and started from a clean slate, without much of the hidden existing space data that was hanging around in the old one. One issue I found is that saving the startup file from Blender 2.5 also saves the window size and location. This means the version I just saved would open up strangely on other screen sizes/setups. I added code to reset this to default when loading it up from the version compiled into the Blender binary, but perhaps Ton/ Brecht might want to check the diff.
2009-05-30 04:16:24 +00:00
extern void wm_clear_default_size(bContext *C);
Whole lot of changes.... here a shortlist: - removed editors/area and put this all in screen - added first python calls (note, a new c file for scriptlinks) - added view3d editor callbacks (no drawing yet) - added files in editors/interface (Cmake and Scons has to be fixed, help welcome!) - now areas/headers are being converted on file read - note: previously saved 2.50 files will crash!!! (.B.blend) - area regions are being drawn, first handler for cursor added (on edge) - window duplicate and scale works correct for screen subdiv Todos for me: - need to fix things in syntax (function names) a bit still - more operators for screen - define how Context will work... still unresolved when it gets set - docs! Reviews of code structure is welcome! There are also more todos now for others, but it can wait a couple of days
2008-01-07 18:03:41 +00:00
/* register to windowmanager for redo or macro */
Console Space Type * interactive console python console. * display reports and filter types. defaults to operator display so you can see the python commands for tools as you use them, eventually it should be possible to select commands and make macto/tools from them. Example use of autocomp. b<tab>, bpy.<tab>, bpy.<tab>, bpy.data.<tab> etc. basic instructions are printed when opening the console. Details... * Console exec and autocomp are done with operators written in python. * added CTX_wm_reports() to get the global report list. * The window manager had a report ListBase but reports have their own struct, switched to allocate and assign when initializing the WM since the type is not available in DNA. * changed report types flags for easier display filtering. * added report type RPT_OPERATOR * logging operators also adds a python-syntax report into CTX_wm_reports() so they can be displayed in the console as well as calling a notifier for console to redraw. * RnaAPI context.area.tag_redraw() to redraw the current area from a python operator. Todo... * better interactions with the console, scrolling, copy/paste. * the text displayed doesnt load back. * colors need to be themed. * scroll limit needs to be a user pref. * only tested with cmake and scons.
2009-07-16 00:50:27 +00:00
void wm_operator_register(bContext *C, wmOperator *op);
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
/* wm_operator.c, for init/exit */
void wm_operatortype_free(void);
void wm_operatortype_init(void);
Key Configuration Keymaps are now saveable and configurable from the user preferences, note that editing one item in a keymap means the whole keymap is now defined by the user and will not be updated by Blender, an option for syncing might be added later. The outliner interface is still there, but I will probably remove it. There's actually 3 levels now: * Default builtin key configuration. * Key configuration loaded from .py file, for configs like Blender 2.4x or other 3D applications. * Keymaps edited by the user and saved in .B.blend. These can be saved to .py files as well to make creating distributable configurations easier. Also, user preferences sections were reorganized a bit, now there is: Interface, Editing, Input, Files and System. Implementation notes: * wmKeyConfig was added which represents a key configuration containing keymaps. * wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap. * Modal maps are not wrapped yet. * User preferences DNA file reading did not support newdataadr() yet, added this now for reading keymaps. * Key configuration related settings are now RNA wrapped. * is_property_set and is_property_hidden python methods were added.
2009-10-08 18:40:03 +00:00
void wm_window_keymap(wmKeyConfig *keyconf);
Step 3 for the initial commits for 2.5: removing src/ and python, adding new windowmanager module, and the first bits of new editors module.
2007-12-24 18:27:28 +00:00
2.5 Sanitized the 'tweak' event. Original idea was to have WM event system generating it automatically. However, I first tested it via a handler and operator, to check what kind of configurations would be useful. It appeared to not work nice, also because that inserting a tweak operator in a keymap is confusing. Now 'tweaks' are generated automatically, and can be catched by keymaps as any event. The current definition of tweak is: - if Left/Middle/Rightmouse pressed if event wasn't handled by window queue (modal handlers) start checking mousepositions - while mousepositions are checked - escape on any event other than mouse - on mouse events: - add tweak event if mousemove > 10 pixels - stop checking for tweak if mousebutton released - Tweak events have a define indicating mousebutton used EVT_TWEAK_L, EVT_TWEAK_M, EVT_TWEAK_R - In keymap definitions you can use _S or _A to map to action or select mouse userdef. - Event value in keymap should be KM_ANY for all tweaks, or use one of the eight directions: EVT_GESTURE_E, _SE, _S, _SW, _W, _NW, _N, _NE - And of course you can add modifier checks in keymaps for it. - Because tweaks are a result of mouse events, the handlers get both to evaluate. That means that RMB-select + tweak will work correctly. In case you don't want both to be handled, for example the CTRL+LMB 'extrude' and CTRL+LMB-tweak 'lasso select', you will need to set the first acting on a EVT_RELEASE, this event only gets passed on when tweak fails. The current system allows all options, configurable, we had in 2.48, and many more! A diagram of what's possible is on the todo. :) Also in this commit: lasso select editmesh failed with 'zbuffer occluded select'. Also circle-select failed.
2009-02-02 14:13:14 +00:00
void wm_tweakevent_test(bContext *C, wmEvent *event, int action);
2.5: gesture code in WM - Simplified and cleaned previous border code It was a bit too complex, too many data manipulations Original idea was to have WM API calls to manage border, circle, lines, lasso, etc. This now means that WM provides callbacks for custom operators, so it's very easy to make them. Check bottom of screen_edit.c for an example. Currently two borders were coded; with and without cross hair. Press Bkey in any area-region to test it (note: time window has wrong matrix!) Some specs to note: - gestures are in region space, and draw 'over'. That latter still needs some work when we do real composites. - only the active region is redrawn. - on todo is the generic gesture engine for 'tweak' or like how currently grab gestures in Blender work. These will be configurable per area-region, and WM then will send the proper "Gesture Event" with properties (N, S, E, W, etc) to which you then can assign operators. Such events will be generated with low priority, so other handlers who swallowed mouse events have preference.
2008-11-19 13:16:05 +00:00
/* wm_gesture.c */
[#20581] Lasso tool ends unexpectedly Don't limit lasso to 1024 points, just realloc array with increased size when current limit is reached. Also silence two stupid warnings.
2010-01-10 20:16:56 +00:00
#define WM_LASSO_MIN_POINTS 1024
2.5: gesture code in WM - Simplified and cleaned previous border code It was a bit too complex, too many data manipulations Original idea was to have WM API calls to manage border, circle, lines, lasso, etc. This now means that WM provides callbacks for custom operators, so it's very easy to make them. Check bottom of screen_edit.c for an example. Currently two borders were coded; with and without cross hair. Press Bkey in any area-region to test it (note: time window has wrong matrix!) Some specs to note: - gestures are in region space, and draw 'over'. That latter still needs some work when we do real composites. - only the active region is redrawn. - on todo is the generic gesture engine for 'tweak' or like how currently grab gestures in Blender work. These will be configurable per area-region, and WM then will send the proper "Gesture Event" with properties (N, S, E, W, etc) to which you then can assign operators. Such events will be generated with low priority, so other handlers who swallowed mouse events have preference.
2008-11-19 13:16:05 +00:00
void wm_gesture_draw(struct wmWindow *win);
- UNUSED macro wasn't throwing an error with GCC if a var become used. - made interface, windowmanager, readfile build without unused warnings. - re-arranged CMake's source/blender build order so less changed libs are build later, eg: IK, avi
2010-10-16 02:40:31 +00:00
int wm_gesture_evaluate(wmGesture *gesture);
2.5 Notifier system upgrade, based on Brecht's doc. Implementation notes: http://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataNotifiers#Implementation In short: let's try to strictly communicate in a notifier what happened. The listeners then can act themselves. It also means that a frame-changed notifier doesn't send out redraws, the editors themselves can decide.
2008-12-27 16:09:56 +00:00
void wm_gesture_tag_redraw(bContext *C);
Initial revision
2002-10-12 11:37:38 +00:00
Auto Save Auto save is now working again in 2.5. It will also remember now what the location of the original file was when recovering it, so that library links still work and saving the restored file does not save to the temp directory. There is also a new Recover Auto Save operator which will open the filebrowser in the temp directory and show the auto saved .blends. Implemenation Notes: * Timer storage was moved from window to windowmanager, so we can have windowmanager level timers too now, doesn't make sense to have autosave timer attached to a particular window. * FileGlobal now has a filename field storing where the file was saved. Note that this is only used when loading a file through the recover operators, regular file read doesn't use it, so copying the quit.blend manually over the original file will still work as expected. * Jobs timer no longer uses operator now, this seems more like an internal thing, changing keymaps should not make it possible to break the jobs manager. * Autosave is postponed by 10 seconds when a modal operator is running, e.g. transform or file browsing. * Moved setting G.sce in setup_app_data before depsgraph updates, these can use the filename for pointcaches.
2009-10-20 13:58:53 +00:00
/* wm_jobs.c */
void wm_jobs_timer(const bContext *C, wmWindowManager *wm, wmTimer *wt);
2.5 New feature: allowing to open temporarily windows for output. Implemented for: - Render output (use output menu "new window" option). - User Preferences (alt+U, plus added in 'File' menu) Currently the window opens where your mouse is. The Render window works as usual, with ESC or F11 moving it to back or front again. That allows the window position to remain where you moved it on new renders. If you close a render window when it renders, the render thread will be killed. User prefs show 'info window' now... i thought we'd use outliner? Anyhoo, I've made the 'save settings' to close the 2nd window as well. Opening a secondary file window for save I'll check on later, this has to be checked with the current event system still. the WM_window_open_temp() api call for this maintains currently a *single* temp window. If you have a render window open, and call for the preferences, the render window will be used for it. And the other way around. On closing the blender window, the temp windows close automatically when there's no regular window open, and blender quits.
2009-07-24 12:43:59 +00:00
void wm_jobs_timer_ended(wmWindowManager *wm, wmTimer *wt);
2.5 Added WM Jobs manager - WM can manage threaded jobs for you; just provide a couple of components to get it work: - customdata, free callback for it - timer step, notifier code - start callback, update callback - Once started, each job runs an own timer, and will for every time step check necessary updates, or close the job when ready. - No drawing happens in jobs, that's for notifiers! - Every job stores an owner pointer, and based on this owner it will prevent multiple jobs to enter the stack. Instead it will re-use a running job, signal it to stop and allow caller to re-initialize it even. - Check new wm_jobs.c for more explanation. Jobs API is still under construction. Fun: BLI_addtail(&wm->jobs, steve); :) Put Node shader previews back using wmJobs - Preview calculating is now fully threaded (1 thread still) - Thanks to new event system + notifiers, you can see previews update even while dragging sliders! - Currently it only starts when you change a node setting. Warning: the thread render shares Node data, so don't delete nodes while it renders! This topic is on the todo to make safe. Also: - bug in region initialize (do_versions) showed channel list in node editor wrong. - flagged the channel list 'hidden' now, it was really in the way! This is for later to work on anyway. - recoded Render API callbacks so it gets handlers passed on, no globals to use anymore, remember? - previewrender code gets now so much nicer! Will remove a lot of stuff from code soon.
2009-01-22 14:59:49 +00:00
Auto Save Auto save is now working again in 2.5. It will also remember now what the location of the original file was when recovering it, so that library links still work and saving the restored file does not save to the temp directory. There is also a new Recover Auto Save operator which will open the filebrowser in the temp directory and show the auto saved .blends. Implemenation Notes: * Timer storage was moved from window to windowmanager, so we can have windowmanager level timers too now, doesn't make sense to have autosave timer attached to a particular window. * FileGlobal now has a filename field storing where the file was saved. Note that this is only used when loading a file through the recover operators, regular file read doesn't use it, so copying the quit.blend manually over the original file will still work as expected. * Jobs timer no longer uses operator now, this seems more like an internal thing, changing keymaps should not make it possible to break the jobs manager. * Autosave is postponed by 10 seconds when a modal operator is running, e.g. transform or file browsing. * Moved setting G.sce in setup_app_data before depsgraph updates, these can use the filename for pointcaches.
2009-10-20 13:58:53 +00:00
/* wm_files.c */
void wm_autosave_timer(const bContext *C, wmWindowManager *wm, wmTimer *wt);
void wm_autosave_timer_ended(wmWindowManager *wm);
void wm_autosave_delete(void);
void wm_autosave_read(bContext *C, struct ReportList *reports);
cleanup only - rename 'name', 'dir' --> 'filepath' where these actually represent a file path to avoid confusion. - bugfix for possible (but unlikely) uninitialized string. - remove commented script append function, now we have a python api for this.
2011-05-18 06:27:32 +00:00
void wm_autosave_location(char *filepath);
Auto Save Auto save is now working again in 2.5. It will also remember now what the location of the original file was when recovering it, so that library links still work and saving the restored file does not save to the temp directory. There is also a new Recover Auto Save operator which will open the filebrowser in the temp directory and show the auto saved .blends. Implemenation Notes: * Timer storage was moved from window to windowmanager, so we can have windowmanager level timers too now, doesn't make sense to have autosave timer attached to a particular window. * FileGlobal now has a filename field storing where the file was saved. Note that this is only used when loading a file through the recover operators, regular file read doesn't use it, so copying the quit.blend manually over the original file will still work as expected. * Jobs timer no longer uses operator now, this seems more like an internal thing, changing keymaps should not make it possible to break the jobs manager. * Autosave is postponed by 10 seconds when a modal operator is running, e.g. transform or file browsing. * Moved setting G.sce in setup_app_data before depsgraph updates, these can use the filename for pointcaches.
2009-10-20 13:58:53 +00:00
Multi-View and Stereo 3D Official Documentation: http://www.blender.org/manual/render/workflows/multiview.html Implemented Features ==================== Builtin Stereo Camera * Convergence Mode * Interocular Distance * Convergence Distance * Pivot Mode Viewport * Cameras * Plane * Volume Compositor * View Switch Node * Image Node Multi-View OpenEXR support Sequencer * Image/Movie Strips 'Use Multiview' UV/Image Editor * Option to see Multi-View images in Stereo-3D or its individual images * Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images I/O * Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images Scene Render Views * Ability to have an arbitrary number of views in the scene Missing Bits ============ First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report. Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report. Everything else is likely small todos, and may wait until we are sure none of the above is happening. Apart from that there are those known issues: * Compositor Image Node poorly working for Multi-View OpenEXR (this was working prefectly before the 'Use Multi-View' functionality) * Selecting camera from Multi-View when looking from camera is problematic * Animation Playback (ctrl+F11) doesn't support stereo formats * Wrong filepath when trying to play back animated scene * Viewport Rendering doesn't support Multi-View * Overscan Rendering * Fullscreen display modes need to warn the user * Object copy should be aware of views suffix Acknowledgments =============== * Francesco Siddi for the help with the original feature specs and design * Brecht Van Lommel for the original review of the code and design early on * Blender Foundation for the Development Fund to support the project wrap up Final patch reviewers: * Antony Riakiotakis (psy-fi) * Campbell Barton (ideasman42) * Julian Eisel (Severin) * Sergey Sharybin (nazgul) * Thomas Dinged (dingto) Code contributors of the original branch in github: * Alexey Akishin * Gabriel Caraballo
2015-04-06 10:40:12 -03:00
/* wm_stereo.c */
void wm_method_draw_stereo3d(const bContext *C, wmWindow *win);
int wm_stereo3d_set_exec(bContext *C, wmOperator *op);
int wm_stereo3d_set_invoke(bContext *C, wmOperator *op, const wmEvent *event);
void wm_stereo3d_set_draw(bContext *C, wmOperator *op);
Multiview: update Set Stereo 3D menu when the selected stereo mode changes
2015-04-07 15:42:44 -03:00
bool wm_stereo3d_set_check(bContext *C, wmOperator *op);
Multi-View and Stereo 3D Official Documentation: http://www.blender.org/manual/render/workflows/multiview.html Implemented Features ==================== Builtin Stereo Camera * Convergence Mode * Interocular Distance * Convergence Distance * Pivot Mode Viewport * Cameras * Plane * Volume Compositor * View Switch Node * Image Node Multi-View OpenEXR support Sequencer * Image/Movie Strips 'Use Multiview' UV/Image Editor * Option to see Multi-View images in Stereo-3D or its individual images * Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images I/O * Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images Scene Render Views * Ability to have an arbitrary number of views in the scene Missing Bits ============ First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report. Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report. Everything else is likely small todos, and may wait until we are sure none of the above is happening. Apart from that there are those known issues: * Compositor Image Node poorly working for Multi-View OpenEXR (this was working prefectly before the 'Use Multi-View' functionality) * Selecting camera from Multi-View when looking from camera is problematic * Animation Playback (ctrl+F11) doesn't support stereo formats * Wrong filepath when trying to play back animated scene * Viewport Rendering doesn't support Multi-View * Overscan Rendering * Fullscreen display modes need to warn the user * Object copy should be aware of views suffix Acknowledgments =============== * Francesco Siddi for the help with the original feature specs and design * Brecht Van Lommel for the original review of the code and design early on * Blender Foundation for the Development Fund to support the project wrap up Final patch reviewers: * Antony Riakiotakis (psy-fi) * Campbell Barton (ideasman42) * Julian Eisel (Severin) * Sergey Sharybin (nazgul) * Thomas Dinged (dingto) Code contributors of the original branch in github: * Alexey Akishin * Gabriel Caraballo
2015-04-06 10:40:12 -03:00
void wm_stereo3d_set_cancel(bContext *C, wmOperator *op);
WM: expose file loading operator property init functions
2014-04-03 11:04:02 +11:00
/* init operator properties */
void wm_open_init_load_ui(wmOperator *op, bool use_prefs);
void wm_open_init_use_scripts(wmOperator *op, bool use_prefs);
- converted circle select use a modal map - now works exactly like 2.4x, except that its accessed from the CKey - hack to remember circle size, need some better way to do this
2009-11-05 17:32:06 +00:00
/* hack to store circle select size - campbell, must replace with nice operator memory */
#define GESTURE_MEMORY
#ifdef GESTURE_MEMORY
extern int circle_select_size;
#endif
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#endif /* __WM_H__ */
updated .c files to include: #ifdef HAVE_CONFIG_H #include <config.h> #endif Just need to finish cpp files now :) Kent -- mein@cs.umn.edu
2002-11-25 12:02:15 +00:00
Copy Permalink