Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
/*
|
2002-10-12 11:37:38 +00:00
|
|
|
* $Id$
|
|
|
|
|
*
|
|
|
|
|
* ***** BEGIN GPL/BL DUAL LICENSE BLOCK *****
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
|
* of the License, or (at your option) any later version. The Blender
|
|
|
|
|
* Foundation also sells licenses for use in proprietary software under
|
|
|
|
|
* the Blender License. See http://www.blender.org/BL/ for information
|
|
|
|
|
* about this.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
|
|
|
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is: all of this file.
|
|
|
|
|
*
|
|
|
|
|
* Contributor(s): none yet.
|
|
|
|
|
*
|
|
|
|
|
* ***** END GPL/BL DUAL LICENSE BLOCK *****
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/* global includes */
|
|
|
|
|
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
#include <math.h>
|
2004-06-30 18:54:09 +00:00
|
|
|
#include <string.h>
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2002-11-25 12:02:15 +00:00
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
|
#include <config.h>
|
|
|
|
|
#endif
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
#ifndef WIN32
|
|
|
|
|
#include <unistd.h>
|
|
|
|
|
#else
|
|
|
|
|
#include <io.h>
|
|
|
|
|
#endif
|
|
|
|
|
#include "MEM_guardedalloc.h"
|
|
|
|
|
#include "BLI_arithb.h"
|
|
|
|
|
|
|
|
|
|
#include "MTC_matrixops.h"
|
|
|
|
|
|
2003-12-21 22:38:29 +00:00
|
|
|
#include "render.h"
|
|
|
|
|
#include "mydevice.h"
|
|
|
|
|
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
#include "DNA_group_types.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
#include "DNA_texture_types.h"
|
|
|
|
|
#include "DNA_world_types.h"
|
|
|
|
|
#include "DNA_camera_types.h"
|
|
|
|
|
#include "DNA_image_types.h"
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
#include "DNA_material_types.h"
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
#include "DNA_node_types.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
#include "DNA_object_types.h"
|
|
|
|
|
#include "DNA_lamp_types.h"
|
|
|
|
|
#include "DNA_space_types.h"
|
|
|
|
|
#include "DNA_scene_types.h"
|
|
|
|
|
#include "DNA_screen_types.h"
|
|
|
|
|
|
|
|
|
|
#include "BKE_global.h"
|
|
|
|
|
#include "BKE_image.h"
|
2005-12-21 23:39:20 +00:00
|
|
|
#include "BKE_icons.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
#include "BKE_texture.h"
|
|
|
|
|
#include "BKE_material.h"
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
#include "BKE_node.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
#include "BKE_world.h"
|
|
|
|
|
#include "BKE_texture.h"
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
#include "BKE_utildefines.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
#include "IMB_imbuf.h"
|
|
|
|
|
#include "IMB_imbuf_types.h"
|
|
|
|
|
|
2003-11-27 23:41:54 +00:00
|
|
|
#include "BSE_headerbuttons.h"
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
#include "BSE_node.h"
|
2003-11-27 23:41:54 +00:00
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
#include "BIF_gl.h"
|
|
|
|
|
#include "BIF_screen.h"
|
|
|
|
|
#include "BIF_space.h" /* allqueue */
|
Another huge commit!!!
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
2003-10-10 17:29:01 +00:00
|
|
|
#include "BIF_butspace.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
#include "BIF_mywindow.h"
|
2003-10-11 00:21:05 +00:00
|
|
|
#include "BIF_interface.h"
|
2004-04-09 13:51:48 +00:00
|
|
|
#include "BIF_glutil.h"
|
|
|
|
|
|
2005-03-09 19:45:59 +00:00
|
|
|
#include "BIF_previewrender.h" /* include ourself for prototypes */
|
|
|
|
|
|
2003-07-19 20:31:29 +00:00
|
|
|
#include "PIL_time.h"
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
#include "RE_renderconverter.h"
|
|
|
|
|
|
2004-04-24 20:27:29 +00:00
|
|
|
#include "blendef.h" /* CLAMP */
|
2005-01-07 21:48:25 +00:00
|
|
|
#include "interface.h" /* ui_graphics_to_window() SOLVE! (ton) */
|
2004-04-24 20:27:29 +00:00
|
|
|
|
2003-10-11 14:12:14 +00:00
|
|
|
#define PR_XMIN 10
|
2003-10-11 00:21:05 +00:00
|
|
|
#define PR_YMIN 5
|
2003-10-11 14:12:14 +00:00
|
|
|
#define PR_XMAX 200
|
|
|
|
|
#define PR_YMAX 195
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
#define PR_FACY (PR_YMAX-PR_YMIN-4)/(PR_RECTY)
|
|
|
|
|
|
2005-01-07 21:48:25 +00:00
|
|
|
static rctf prerect;
|
2002-10-12 11:37:38 +00:00
|
|
|
static float pr_facx, pr_facy;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* implementation */
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static short intersect(float *v1, float *v2, float *v3, float *rtlabda, float *ray1, float *ray2)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
|
|
|
|
float x0,x1,x2,t00,t01,t02,t10,t11,t12,t20,t21,t22;
|
|
|
|
|
float m0,m1,m2,deeldet,det1,det2,det3;
|
|
|
|
|
float rtu, rtv;
|
|
|
|
|
|
|
|
|
|
t00= v3[0]-v1[0];
|
|
|
|
|
t01= v3[1]-v1[1];
|
|
|
|
|
t02= v3[2]-v1[2];
|
|
|
|
|
t10= v3[0]-v2[0];
|
|
|
|
|
t11= v3[1]-v2[1];
|
|
|
|
|
t12= v3[2]-v2[2];
|
|
|
|
|
t20= ray1[0]-ray2[0];
|
|
|
|
|
t21= ray1[1]-ray2[1];
|
|
|
|
|
t22= ray1[2]-ray2[2];
|
|
|
|
|
|
|
|
|
|
x0= t11*t22-t12*t21;
|
|
|
|
|
x1= t12*t20-t10*t22;
|
|
|
|
|
x2= t10*t21-t11*t20;
|
|
|
|
|
|
|
|
|
|
deeldet= t00*x0+t01*x1+t02*x2;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(deeldet!=0.0f) {
|
2002-10-12 11:37:38 +00:00
|
|
|
m0= ray1[0]-v3[0];
|
|
|
|
|
m1= ray1[1]-v3[1];
|
|
|
|
|
m2= ray1[2]-v3[2];
|
|
|
|
|
det1= m0*x0+m1*x1+m2*x2;
|
|
|
|
|
rtu= det1/deeldet;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(rtu<=0.0f) {
|
2002-10-12 11:37:38 +00:00
|
|
|
det2= t00*(m1*t22-m2*t21);
|
|
|
|
|
det2+= t01*(m2*t20-m0*t22);
|
|
|
|
|
det2+= t02*(m0*t21-m1*t20);
|
|
|
|
|
rtv= det2/deeldet;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(rtv<=0.0f) {
|
|
|
|
|
if(rtu+rtv>= -1.0f) {
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
det3= m0*(t12*t01-t11*t02);
|
|
|
|
|
det3+= m1*(t10*t02-t12*t00);
|
|
|
|
|
det3+= m2*(t11*t00-t10*t01);
|
|
|
|
|
*rtlabda= det3/deeldet;
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(*rtlabda>=0.0f && *rtlabda<=1.0f) {
|
2002-10-12 11:37:38 +00:00
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static float rcubev[7][3]= {
|
|
|
|
|
{-0.002055, 6.627364, -3.369742},
|
|
|
|
|
{-6.031684, -3.750204, -1.992980},
|
|
|
|
|
{-6.049086, 3.817431, 1.969788},
|
|
|
|
|
{ 6.031685, 3.833064, 1.992979},
|
|
|
|
|
{ 6.049086, -3.734571, -1.969787},
|
|
|
|
|
{ 0.002054, -6.544502, 3.369744},
|
|
|
|
|
{-0.015348, 1.023131, 7.332510} };
|
|
|
|
|
|
|
|
|
|
static int rcubi[3][4]= {
|
|
|
|
|
{3, 6, 5, 4},
|
|
|
|
|
{1, 5, 6, 2},
|
|
|
|
|
{3, 0, 2, 6} };
|
|
|
|
|
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
static int ray_previewrender(int x, int y, float *vec, float *vn, short pr_rectx, short pr_recty)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
2005-12-21 22:21:43 +00:00
|
|
|
/* float scalef= 10.0/100.0; - not fixed any more because of different render sizes */
|
|
|
|
|
float scalef= ( 64.0f / (float)pr_rectx ) * 0.25f;
|
2002-10-12 11:37:38 +00:00
|
|
|
float ray1[3], ray2[3];
|
|
|
|
|
float minlabda, labda;
|
|
|
|
|
int totface= 3, hitface= -1;
|
|
|
|
|
int a;
|
|
|
|
|
|
|
|
|
|
ray1[0]= ray2[0]= x*scalef;
|
|
|
|
|
ray1[1]= ray2[1]= y*scalef;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
ray1[2]= -10.0f;
|
|
|
|
|
ray2[2]= 10.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
minlabda= 1.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
for(a=0; a<totface; a++) {
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(intersect( rcubev[rcubi[a][0]], rcubev[rcubi[a][1]], rcubev[rcubi[a][2]], &labda, ray1, ray2)) {
|
2002-10-12 11:37:38 +00:00
|
|
|
if( labda < minlabda) {
|
|
|
|
|
minlabda= labda;
|
|
|
|
|
hitface= a;
|
|
|
|
|
}
|
|
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(intersect( rcubev[rcubi[a][0]], rcubev[rcubi[a][2]], rcubev[rcubi[a][3]], &labda, ray1, ray2)) {
|
2002-10-12 11:37:38 +00:00
|
|
|
if( labda < minlabda) {
|
|
|
|
|
minlabda= labda;
|
|
|
|
|
hitface= a;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if(hitface > -1) {
|
|
|
|
|
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
CalcNormFloat(rcubev[rcubi[hitface][2]], rcubev[rcubi[hitface][1]], rcubev[rcubi[hitface][0]], vn);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-01-16 11:29:44 +00:00
|
|
|
vec[0]= (minlabda*(ray1[0]-ray2[0])+ray2[0])/4.1;
|
|
|
|
|
vec[1]= (minlabda*(ray1[1]-ray2[1])+ray2[1])/4.1;
|
|
|
|
|
vec[2]= (minlabda*(ray1[2]-ray2[2])+ray2[2])/4.1;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int previewback(int type, int x, int y)
|
|
|
|
|
{
|
2005-12-21 22:21:43 +00:00
|
|
|
unsigned int col;
|
|
|
|
|
char* pcol;
|
2003-12-16 14:12:01 +00:00
|
|
|
|
|
|
|
|
/* checkerboard, for later
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
x+= PR_RECTX/2;
|
2003-12-16 14:12:01 +00:00
|
|
|
y+= PR_RECTX/2;
|
|
|
|
|
if( ((x/24) + (y/24)) & 1) return 0x40404040;
|
|
|
|
|
else return 0xa0a0a0a0;
|
|
|
|
|
*/
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
if(type & MA_DARK) {
|
2005-12-21 22:21:43 +00:00
|
|
|
if(abs(x)>abs(y)) col= 0;
|
|
|
|
|
else col= 0x40404040;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
2005-12-21 22:21:43 +00:00
|
|
|
if(abs(x)>abs(y)) col= 0x40404040;
|
|
|
|
|
else col= 0xa0a0a0a0;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
pcol = (char*) &col;
|
|
|
|
|
pcol[3] = 0; /* set alpha to zero - endianess!*/
|
|
|
|
|
|
|
|
|
|
return col;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static float previewbackf(int type, int x, int y)
|
|
|
|
|
{
|
|
|
|
|
float col;
|
|
|
|
|
|
|
|
|
|
if(type & MA_DARK) {
|
|
|
|
|
if(abs(x)>abs(y)) col= 0.0f;
|
|
|
|
|
else col= 0.25f;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
if(abs(x)>abs(y)) col= 0.25f;
|
|
|
|
|
else col= 0.625f;
|
|
|
|
|
}
|
|
|
|
|
return col;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void set_previewrect(int win, int xmin, int ymin, int xmax, int ymax, short pr_rectx, short pr_recty)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
2005-01-07 21:48:25 +00:00
|
|
|
float pr_sizex, pr_sizey;
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
prerect.xmin= xmin;
|
|
|
|
|
prerect.ymin= ymin;
|
|
|
|
|
prerect.xmax= xmax;
|
|
|
|
|
prerect.ymax= ymax;
|
|
|
|
|
|
2005-01-07 21:48:25 +00:00
|
|
|
ui_graphics_to_window(win, &prerect.xmin, &prerect.ymin);
|
|
|
|
|
ui_graphics_to_window(win, &prerect.xmax, &prerect.ymax);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
pr_sizex= (prerect.xmax-prerect.xmin);
|
|
|
|
|
pr_sizey= (prerect.ymax-prerect.ymin);
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
pr_facx= ( pr_sizex-1.0f)/pr_rectx;
|
|
|
|
|
pr_facy= ( pr_sizey-1.0f)/pr_recty;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-01-07 21:48:25 +00:00
|
|
|
/* correction for gla draw */
|
|
|
|
|
prerect.xmin-= curarea->winrct.xmin;
|
|
|
|
|
prerect.ymin-= curarea->winrct.ymin;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-01-07 21:48:25 +00:00
|
|
|
glMatrixMode(GL_PROJECTION);
|
|
|
|
|
glPushMatrix();
|
|
|
|
|
glMatrixMode(GL_MODELVIEW);
|
|
|
|
|
glPushMatrix();
|
|
|
|
|
|
|
|
|
|
glaDefine2DArea(&curarea->winrct);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
glPixelZoom(pr_facx, pr_facy);
|
2005-01-07 21:48:25 +00:00
|
|
|
|
|
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static void end_previewrect(void)
|
2005-01-07 21:48:25 +00:00
|
|
|
{
|
|
|
|
|
glMatrixMode(GL_PROJECTION);
|
|
|
|
|
glPopMatrix();
|
|
|
|
|
glMatrixMode(GL_MODELVIEW);
|
|
|
|
|
glPopMatrix();
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
glPixelZoom(1.0f, 1.0f);
|
2005-01-30 13:13:31 +00:00
|
|
|
|
2005-02-08 16:31:39 +00:00
|
|
|
// restore viewport / scissor which was set by glaDefine2DArea
|
|
|
|
|
glViewport(curarea->winrct.xmin, curarea->winrct.ymin, curarea->winx, curarea->winy);
|
|
|
|
|
glScissor(curarea->winrct.xmin, curarea->winrct.ymin, curarea->winx, curarea->winy);
|
2005-01-30 13:13:31 +00:00
|
|
|
|
2005-01-07 21:48:25 +00:00
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
static void display_pr_scanline(unsigned int *rect, int recty, short pr_rectx)
|
2005-01-07 21:48:25 +00:00
|
|
|
{
|
2003-07-19 20:31:29 +00:00
|
|
|
|
2005-02-12 14:15:08 +00:00
|
|
|
/* we do steps of 4 scanlines. but draw 5, because of errors in some gfx cards (nvidia geforce, ati...) */
|
2005-02-12 13:12:40 +00:00
|
|
|
if( (recty & 3)==3) {
|
2005-01-07 21:48:25 +00:00
|
|
|
|
2005-02-12 14:15:08 +00:00
|
|
|
if(recty == 3) {
|
2006-01-11 22:36:31 +00:00
|
|
|
glaDrawPixelsSafe(prerect.xmin, prerect.ymin, pr_rectx, 4, GL_RGBA, GL_UNSIGNED_BYTE, rect);
|
2005-02-12 14:15:08 +00:00
|
|
|
}
|
|
|
|
|
else {
|
2005-12-21 22:21:43 +00:00
|
|
|
rect+= (recty-4)*pr_rectx;
|
2006-01-11 22:36:31 +00:00
|
|
|
glaDrawPixelsSafe(prerect.xmin, prerect.ymin + (((float)recty-4.0)*pr_facy), pr_rectx, 5, GL_RGBA, GL_UNSIGNED_BYTE, rect);
|
2005-02-12 14:15:08 +00:00
|
|
|
}
|
2003-07-19 20:31:29 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void draw_tex_crop(Tex *tex)
|
|
|
|
|
{
|
|
|
|
|
rcti rct;
|
|
|
|
|
int ret= 0;
|
|
|
|
|
|
|
|
|
|
if(tex==0) return;
|
|
|
|
|
|
|
|
|
|
if(tex->type==TEX_IMAGE) {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(tex->cropxmin==0.0f) ret++;
|
|
|
|
|
if(tex->cropymin==0.0f) ret++;
|
|
|
|
|
if(tex->cropxmax==1.0f) ret++;
|
|
|
|
|
if(tex->cropymax==1.0f) ret++;
|
2002-10-12 11:37:38 +00:00
|
|
|
if(ret==4) return;
|
|
|
|
|
|
|
|
|
|
rct.xmin= PR_XMIN+2+tex->cropxmin*(PR_XMAX-PR_XMIN-4);
|
|
|
|
|
rct.xmax= PR_XMIN+2+tex->cropxmax*(PR_XMAX-PR_XMIN-4);
|
|
|
|
|
rct.ymin= PR_YMIN+2+tex->cropymin*(PR_YMAX-PR_YMIN-4);
|
|
|
|
|
rct.ymax= PR_YMIN+2+tex->cropymax*(PR_YMAX-PR_YMIN-4);
|
|
|
|
|
|
|
|
|
|
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
|
|
|
|
|
|
|
|
|
|
glColor3ub(0, 0, 0);
|
|
|
|
|
glRecti(rct.xmin+1, rct.ymin-1, rct.xmax+1, rct.ymax-1);
|
|
|
|
|
|
|
|
|
|
glColor3ub(255, 255, 255);
|
|
|
|
|
glRecti(rct.xmin, rct.ymin, rct.xmax, rct.ymax);
|
|
|
|
|
|
|
|
|
|
glPolygonMode(GL_FRONT_AND_BACK, GL_FILL);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
2005-12-30 11:25:15 +00:00
|
|
|
/* temporal abuse; if id_code is -1 it only does texture.... solve! */
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
void BIF_preview_changed(short id_code)
|
2003-10-23 16:52:54 +00:00
|
|
|
{
|
|
|
|
|
ScrArea *sa;
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
for(sa= G.curscreen->areabase.first; sa; sa= sa->next) {
|
2003-10-23 16:52:54 +00:00
|
|
|
if(sa->spacetype==SPACE_BUTS) {
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
SpaceButs *sbuts= sa->spacedata.first;
|
|
|
|
|
if(sbuts->mainb==CONTEXT_SHADING) {
|
|
|
|
|
int tab= sbuts->tab[CONTEXT_SHADING];
|
|
|
|
|
if(tab==TAB_SHADING_MAT && (id_code==ID_MA || id_code==ID_TE)) {
|
|
|
|
|
if (sbuts->ri) sbuts->ri->cury= 0;
|
|
|
|
|
addafterqueue(sa->win, RENDERPREVIEW, 1);
|
|
|
|
|
}
|
2005-12-30 11:25:15 +00:00
|
|
|
else if(tab==TAB_SHADING_TEX && (id_code==ID_TE || id_code==-1)) {
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if (sbuts->ri) sbuts->ri->cury= 0;
|
|
|
|
|
addafterqueue(sa->win, RENDERPREVIEW, 1);
|
|
|
|
|
}
|
|
|
|
|
else if(tab==TAB_SHADING_LAMP && (id_code==ID_LA || id_code==ID_TE)) {
|
2005-12-21 22:21:43 +00:00
|
|
|
if (sbuts->ri) sbuts->ri->cury= 0;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
addafterqueue(sa->win, RENDERPREVIEW, 1);
|
2004-07-10 19:56:27 +00:00
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
else if(tab==TAB_SHADING_WORLD && (id_code==ID_WO || id_code==ID_TE)) {
|
|
|
|
|
if (sbuts->ri) sbuts->ri->cury= 0;
|
|
|
|
|
addafterqueue(sa->win, RENDERPREVIEW, 1);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else if(sa->spacetype==SPACE_NODE) {
|
|
|
|
|
SpaceNode *snode= sa->spacedata.first;
|
|
|
|
|
if(snode->treetype==NTREE_SHADER && (id_code==ID_MA || id_code==ID_TE)) {
|
|
|
|
|
snode_tag_dirty(snode);
|
2004-07-10 19:56:27 +00:00
|
|
|
}
|
|
|
|
|
}
|
2003-08-17 12:56:41 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static void previewdraw_render(struct RenderInfo* ri, ScrArea* area)
|
2005-12-21 22:21:43 +00:00
|
|
|
{
|
|
|
|
|
int y;
|
|
|
|
|
|
|
|
|
|
if (!ri) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (y=0; y<ri->pr_recty; y++) {
|
|
|
|
|
display_pr_scanline(ri->rect, y, ri->pr_rectx);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
static void sky_preview_pixel(float lens, int x, int y, char *rect, short pr_rectx, short pr_recty)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
float view[3];
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
if(R.wrld.skytype & WO_SKYPAPER) {
|
2005-12-21 22:21:43 +00:00
|
|
|
view[0]= (2*x)/(float)pr_rectx;
|
|
|
|
|
view[1]= (2*y)/(float)pr_recty;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
view[2]= 0.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
view[0]= x;
|
|
|
|
|
view[1]= y;
|
2005-12-21 22:21:43 +00:00
|
|
|
view[2]= -lens*pr_rectx/32.0;
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
Normalise(view);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2004-04-24 20:27:29 +00:00
|
|
|
RE_sky_char(view, rect);
|
2005-12-21 22:21:43 +00:00
|
|
|
rect[3] = 0xFF;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void init_preview_world(World* wrld)
|
|
|
|
|
{
|
|
|
|
|
int a;
|
|
|
|
|
char *cp;
|
|
|
|
|
|
|
|
|
|
if(wrld) {
|
|
|
|
|
R.wrld= *(wrld);
|
|
|
|
|
|
|
|
|
|
cp= (char *)&R.wrld.fastcol;
|
|
|
|
|
|
|
|
|
|
cp[0]= 255.0*R.wrld.horr;
|
|
|
|
|
cp[1]= 255.0*R.wrld.horg;
|
|
|
|
|
cp[2]= 255.0*R.wrld.horb;
|
|
|
|
|
cp[3]= 1;
|
|
|
|
|
|
|
|
|
|
VECCOPY(R.grvec, R.viewmat[2]);
|
|
|
|
|
Normalise(R.grvec);
|
|
|
|
|
Mat3CpyMat4(R.imat, R.viewinv);
|
|
|
|
|
|
|
|
|
|
for(a=0; a<MAX_MTEX; a++)
|
|
|
|
|
if(R.wrld.mtex[a] && R.wrld.mtex[a]->tex) R.wrld.skytype |= WO_SKYTEX;
|
|
|
|
|
|
|
|
|
|
while(R.wrld.aosamp*R.wrld.aosamp < R.osa) R.wrld.aosamp++;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
memset(&R.wrld, 0, sizeof(World));
|
|
|
|
|
R.wrld.exp= 0.0;
|
|
|
|
|
R.wrld.range= 1.0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
R.wrld.linfac= 1.0 + pow((2.0*R.wrld.exp + 0.5), -10);
|
|
|
|
|
R.wrld.logfac= log( (R.wrld.linfac-1.0)/R.wrld.linfac )/R.wrld.range;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
/* This function carefully copies over the struct members
|
|
|
|
|
from the struct Lamp to a new struct LampRen.
|
|
|
|
|
It only copies the struct members that are needed
|
|
|
|
|
in the lamp_preview_pixel function.
|
|
|
|
|
Replacement for the RE_add_render_lamp function in
|
|
|
|
|
the preview, because this only works for the
|
|
|
|
|
current selected lamp.
|
|
|
|
|
*/
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static LampRen* create_preview_render_lamp(Lamp* la)
|
|
|
|
|
{
|
2005-12-21 22:21:43 +00:00
|
|
|
LampRen *lar;
|
|
|
|
|
int c;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
lar= (LampRen *)MEM_callocN(sizeof(LampRen),"lampren");
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
MTC_Mat3One(lar->mat);
|
|
|
|
|
MTC_Mat3One(lar->imat);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
lar->type= la->type;
|
|
|
|
|
lar->mode= la->mode;
|
|
|
|
|
lar->energy= la->energy;
|
|
|
|
|
if(la->mode & LA_NEG) lar->energy= -lar->energy;
|
|
|
|
|
lar->r= lar->energy*la->r;
|
|
|
|
|
lar->g= lar->energy*la->g;
|
|
|
|
|
lar->b= lar->energy*la->b;
|
|
|
|
|
lar->k= la->k;
|
|
|
|
|
lar->dist= la->dist;
|
|
|
|
|
lar->ld1= la->att1;
|
|
|
|
|
lar->ld2= la->att2;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
/* exceptions: */
|
|
|
|
|
lar->spottexfac= 1.0;
|
|
|
|
|
lar->spotsi= cos( M_PI/3.0 );
|
|
|
|
|
lar->spotbl= (1.0-lar->spotsi)*la->spotblend;
|
|
|
|
|
|
|
|
|
|
MTC_Mat3One(lar->imat);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
if(lar->type==LA_SPOT) {
|
|
|
|
|
if(lar->mode & LA_ONLYSHADOW) {
|
|
|
|
|
if((lar->mode & (LA_SHAD|LA_SHAD_RAY))==0) lar->mode -= LA_ONLYSHADOW;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
memcpy(lar->mtex, la->mtex, MAX_MTEX*sizeof(void *));
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
for(c=0; c<MAX_MTEX; c++) {
|
|
|
|
|
if(la->mtex[c] && la->mtex[c]->tex) {
|
|
|
|
|
lar->mode |= LA_TEXTURE;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
if(R.flag & R_RENDERING) {
|
|
|
|
|
if(R.osa) {
|
|
|
|
|
if(la->mtex[c]->tex->type==TEX_IMAGE) lar->mode |= LA_OSATEX;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
return lar;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void lamp_preview_pixel(ShadeInput *shi, LampRen *la, int x, int y, char *rect, short pr_rectx, short pr_recty)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
float inpr, i, t, dist, distkw, vec[3], lacol[3];
|
2002-10-12 11:37:38 +00:00
|
|
|
int col;
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
shi->co[0]= (float)x/(pr_rectx/4);
|
|
|
|
|
shi->co[1]= (float)y/(pr_rectx/4);
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
shi->co[2]= 0;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
vec[0]= 0.02f*x;
|
|
|
|
|
vec[1]= 0.02f*y;
|
2005-12-21 22:21:43 +00:00
|
|
|
vec[2]= 0.005f*pr_rectx;
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
VECCOPY(shi->view, vec);
|
|
|
|
|
dist= Normalise(shi->view);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
lacol[0]= la->r;
|
|
|
|
|
lacol[1]= la->g;
|
|
|
|
|
lacol[2]= la->b;
|
|
|
|
|
|
|
|
|
|
if(la->mode & LA_TEXTURE) do_lamp_tex(la, vec, shi, lacol);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
if(la->type==LA_SUN || la->type==LA_HEMI) {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
dist= 1.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
|
|
|
|
|
if(la->mode & LA_QUAD) {
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
t= 1.0f;
|
|
|
|
|
if(la->ld1>0.0f)
|
2002-10-12 11:37:38 +00:00
|
|
|
t= la->dist/(la->dist+la->ld1*dist);
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(la->ld2>0.0f) {
|
2002-10-12 11:37:38 +00:00
|
|
|
distkw= la->dist*la->dist;
|
|
|
|
|
t= t*distkw/(t*distkw+la->ld2*dist*dist);
|
|
|
|
|
}
|
|
|
|
|
dist= t;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
dist= (la->dist/(la->dist+dist));
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Major update, all implemented a bit in a hurry, and probably will need bugfixes at some point.
Extended the range of the depth and cdepth parameters as reqested by leope.
Bumpmapping should now be a bit more similar to the Blender render.
Added support for all remaining lightsources in yafray, tried to make use of
as much of the existing Blender parameters as possible.
Blender Lamp: added switch to enable rendering with shadowbuffer ('softlight' in yafray).
All other parameters are similar to the Blender settings, for yafray both the
bias parameter and the shadowbuffer size can be lower than equivalent Blender
settings, since the yafray buffer is floating point. Remember that 6 shadowmaps
are created in this case, so can use quite a bit of memory with large
buffer settings.
When 'ray shadow' is enabled for this lamp type, it is possible to set a light
radius to create a spherical arealight source ('spherelight' in yafray),
when this is 0, it is exported as a pointlight instead.
Blender Spot: as in Blender now supports 'halo' rendering.
Halo spots always use shadowbuffers, so when enabled the buttons for shadowmap
settings will appear. The 'ray shadow' button can still be used to disable
shadows cast onto other objects, independent of halo shadows.
One thing to remember, halo's don't work with empty backgrounds, something must
be behind the spotlight for it to be visible.
And finally, the photonlight:
probably the most confusing (as more things related to yafray), the photonlight
is not a real lightsource, it is only used as a source to shoot photons from.
Since indirect lighting is already supported (and looks better as well)
only caustics mode is supported.
So to be able to use this properly other lightsources must be used with it.
For the photonlighting to be 'correct' similar lightsettings as for the 'source'
light are needed.
Probably the best way to do this, when you are happy with the lighting setup
you have, and want to add caustics, copy the light you want to enable for
caustics (shift-D) and leave everything as is, then change the mode to
'Photon'.
To not waiste any photons, the photonlight behaves similar to the spotlight,
you can set the width of the beam with the 'angle' parameter. Make sure
that any object that needs to cast caustics is within that beam, make
the beam width as small as possible to tightly fit the object.
The following other parameters can be set:
-photons: the number of photons to shoot.
-search: the number of photons to search when rendering, the higher,
the blurrier the caustics.
-depth: the amount of photon bounces allowed, since the primary use is for
caustics, you probably best set this to the same level as the 'ray depth'
parameter.
-Blur: this controls the amount of caustics blur (in addition to the search
parameter), very low values will cause very sharp caustics, which when used
with a low photonnumber, probably lead to only some noisy specks being rendered.
-Use QMC: Use quasi monte carlo sampling, can lead to cleaner results, but also
can sometimes cause patterns.
Since the photonlight has no meaning to Blender, when using photonlights and
switching back to the internal render, the light doesn't do anything, and no
type button will be selected. The lightsource can still be selected, but unless
switching to yafray, no parameters can set.
Apologies to Anexus, I had no time to really do something with your code,
I'll still look at it later, to see if I can improve anything in my implementation.
2004-07-28 22:37:12 +00:00
|
|
|
/* yafray: preview shade as spot, sufficient */
|
|
|
|
|
if ((la->type==LA_SPOT) || (la->type==LA_YF_PHOTON)) {
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
if(la->mode & LA_SQUARE) {
|
|
|
|
|
/* slightly smaller... */
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
inpr= 1.7*cos(MAX2(fabs(shi->view[0]/shi->view[2]) , fabs(shi->view[1]/shi->view[2]) ));
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
inpr= shi->view[2];
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
t= la->spotsi;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(inpr<t) dist= 0.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
else {
|
|
|
|
|
t= inpr-t;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(t<la->spotbl && la->spotbl!=0.0f) {
|
2003-04-30 13:22:26 +00:00
|
|
|
/* soft area */
|
2002-10-12 11:37:38 +00:00
|
|
|
i= t/la->spotbl;
|
|
|
|
|
t= i*i;
|
|
|
|
|
i= t*i;
|
|
|
|
|
inpr*=(3.0*t-2.0*i);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
dist*=inpr;
|
|
|
|
|
}
|
Area lights and more...
- New lamp type added "Area". This uses the radiosity formula (Stoke) to
calculate the amount of energy which is received from a plane. Result
is very nice local light, which nicely spreads out.
- Area lamps have a 'gamma' option to control the light spread
- Area lamp builtin sizes: square, rect, cube & box. Only first 2 are
implemented. Set a type, and define area size
- Button area size won't affect the amount of energy. But scaling the lamp
in 3d window will do. This is to cover the case when you scale an entire
scene, the light then will remain identical
If you just want to change area lamp size, use buttons when you dont want
to make the scene too bright or too dark
- Since area lights realistically are sensitive for distance (quadratic), the
effect it has is quickly too much, or too less. For this the "Dist" value
in Lamp can be used. Set it at Dist=10 to have reasonable light on distance
10 Blender units (assumed you didnt scale lamp object).
- I tried square sized specularity, but this looked totally weird. Not
committed
- Plan is to extend area light with 3d dimensions, boxes and cubes.
- Note that area light is one-sided, towards negative Z. I need to design
a nice drawing method for it.
Area Shadow
- Since there are a lot of variables associated with soft shadow, they now
only are available for Area lights. Allowing spot & normal lamp to have
soft shadow is possible though, but will require a reorganisation of the
Lamp buttons. Is a point of research & feedback still.
- Apart from area size, you now can individually set amount of samples in
X and Y direction (for area lamp type 'Rect'). For box type area lamp,
this will become 3 dimensions
- Area shadows have four options:
"Clip circle" : only uses a circular shape of samples, gives smoother
results
"Dither" : use a 2x2 dither mask
"Jitter" : applys a pseudo-random offset to samples
"Umbra" : extra emphasis on area that's fully in shadow.
Raytrace speedup
- improved filling in faces in Octree. Large faces occupied too many nodes
- added a coherence check; rays fired sequentially that begin and end in
same octree nodes, and that don't intersect, are quickly rejected
- rendering shadow scenes benefits from this 20-40%. My statue test monkey
file now renders in 19 seconds (was 30).
Plus:
- adjusted specular max to 511, and made sure Blinn spec has again this
incredible small spec size
- for UI rounded theme: the color "button" displayed RGB color too dark
- fixed countall() function, to also include Subsurf totals
- removed setting the 'near' clipping for pressing dot-key numpad
- when you press the buttons-window icon for 'Shading Context' the context
automaticilly switches as with F5 hotkey
Please be warned that this is not a release... settings in files might not
work as it did, nor guaranteed to work when we do a release. :)
2003-12-29 16:52:51 +00:00
|
|
|
else if ELEM(la->type, LA_LOCAL, LA_AREA) dist*= shi->view[2];
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
col= 255.0*dist*lacol[0];
|
2002-10-12 11:37:38 +00:00
|
|
|
if(col<=0) rect[0]= 0; else if(col>=255) rect[0]= 255; else rect[0]= col;
|
|
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
col= 255.0*dist*lacol[1];
|
2002-10-12 11:37:38 +00:00
|
|
|
if(col<=0) rect[1]= 0; else if(col>=255) rect[1]= 255; else rect[1]= col;
|
|
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
col= 255.0*dist*lacol[2];
|
2002-10-12 11:37:38 +00:00
|
|
|
if(col<=0) rect[2]= 0; else if(col>=255) rect[2]= 255; else rect[2]= col;
|
2005-12-21 22:21:43 +00:00
|
|
|
|
|
|
|
|
rect[3] = 0xFF;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
static void init_previewhalo(HaloRen *har, Material *mat, short pr_rectx, short pr_recty)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
|
|
har->type= 0;
|
|
|
|
|
if(mat->mode & MA_HALO_XALPHA) har->type |= HA_XALPHA;
|
|
|
|
|
har->mat= mat;
|
|
|
|
|
har->hard= mat->har;
|
2005-12-21 22:21:43 +00:00
|
|
|
har->rad= pr_rectx/2.0;
|
|
|
|
|
har->radsq= pr_rectx*pr_rectx/4.0;
|
2002-10-12 11:37:38 +00:00
|
|
|
har->alfa= mat->alpha;
|
|
|
|
|
har->add= 255.0*mat->add;
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
har->r= mat->r;
|
|
|
|
|
har->g= mat->g;
|
|
|
|
|
har->b= mat->b;
|
2005-12-21 22:21:43 +00:00
|
|
|
har->xs= pr_rectx/2.0;
|
|
|
|
|
har->ys= pr_rectx/2.0;
|
2002-10-12 11:37:38 +00:00
|
|
|
har->zs= har->zd= 0;
|
|
|
|
|
har->seed= (mat->seed1 % 256);
|
|
|
|
|
|
|
|
|
|
if( (mat->mode & MA_HALOTEX) && mat->mtex[0] ) har->tex= 1; else har->tex=0;
|
|
|
|
|
|
|
|
|
|
if(mat->mode & MA_STAR) har->starpoints= mat->starc; else har->starpoints= 0;
|
|
|
|
|
if(mat->mode & MA_HALO_LINES) har->linec= mat->linec; else har->linec= 0;
|
|
|
|
|
if(mat->mode & MA_HALO_RINGS) har->ringc= mat->ringc; else har->ringc= 0;
|
|
|
|
|
if(mat->mode & MA_HALO_FLARE) har->flarec= mat->flarec; else har->flarec= 0;
|
|
|
|
|
|
|
|
|
|
if(har->flarec) {
|
2005-12-21 22:21:43 +00:00
|
|
|
har->xs-= pr_rectx/3;
|
|
|
|
|
har->ys+= pr_rectx/3;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
har->rad*= 0.3;
|
|
|
|
|
har->radsq= har->rad*har->rad;
|
|
|
|
|
|
|
|
|
|
har->pixels= har->rad*har->rad*har->rad;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
static void halo_preview_pixel(HaloRen *har, int startx, int endx, int y, char *rect, short pr_rectx)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
float dist, xn, yn, xsq, ysq, colf[4];
|
2002-10-12 11:37:38 +00:00
|
|
|
int x;
|
|
|
|
|
char front[4];
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
if(har->flarec) yn= y-pr_rectx/3;
|
2002-10-12 11:37:38 +00:00
|
|
|
else yn= y;
|
|
|
|
|
ysq= yn*yn;
|
|
|
|
|
|
|
|
|
|
for(x=startx; x<endx; x++) {
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
if(har->flarec) xn= x+pr_rectx/3;
|
2002-10-12 11:37:38 +00:00
|
|
|
else xn= x;
|
|
|
|
|
|
|
|
|
|
xsq= xn*xn;
|
|
|
|
|
dist= xsq+ysq;
|
|
|
|
|
|
|
|
|
|
if(dist<har->radsq) {
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
RE_shadehalo(har, front, colf, 0, dist, xn, yn, har->flarec);
|
2002-10-12 11:37:38 +00:00
|
|
|
RE_addalphaAddfac(rect, front, har->add);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
rect[3] = 0xFF; /* makes icon display all pixels */
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
rect+= 4;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static void previewflare(RenderInfo *ri, HaloRen *har, short pr_rectx, short pr_recty, int pr_method)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
|
|
|
|
float ycor;
|
|
|
|
|
unsigned int *rectot;
|
2005-01-18 15:22:42 +00:00
|
|
|
int afmx, afmy, rectx, recty, y;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
/* check for "Preview" block already in calling function BIF_previewrender! - elubie */
|
2003-10-11 00:21:05 +00:00
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
/* temps */
|
|
|
|
|
ycor= R.ycor;
|
|
|
|
|
rectx= R.rectx;
|
|
|
|
|
recty= R.recty;
|
|
|
|
|
afmx= R.afmx;
|
|
|
|
|
afmy= R.afmy;
|
|
|
|
|
rectot= R.rectot;
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
R.r.postmul= R.r.postgamma= R.r.postsat= 1.0f;
|
|
|
|
|
R.r.posthue= R.r.postadd= 0.0f;
|
|
|
|
|
R.ycor= 1.0f;
|
2005-12-21 22:21:43 +00:00
|
|
|
R.rectx= pr_rectx;
|
|
|
|
|
R.recty= pr_recty;
|
|
|
|
|
R.afmx= pr_rectx/2;
|
|
|
|
|
R.afmy= pr_recty/2;
|
|
|
|
|
R.rectot= ri->rect;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
waitcursor(1);
|
|
|
|
|
RE_renderflare(har);
|
2003-10-11 22:00:30 +00:00
|
|
|
waitcursor(0);
|
2005-01-18 15:22:42 +00:00
|
|
|
// not sure why, either waitcursor or renderflare screws up (disabled then)
|
|
|
|
|
//areawinset(curarea->win);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
/* draw can just be called this way, all settings are OK */
|
|
|
|
|
if (pr_method==PR_DRAW_RENDER) {
|
2005-12-21 22:21:43 +00:00
|
|
|
for (y=0; y<pr_recty; y++) {
|
|
|
|
|
display_pr_scanline(ri->rect, y, pr_rectx);
|
|
|
|
|
}
|
2005-01-18 15:22:42 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
/* temps */
|
|
|
|
|
R.ycor= ycor;
|
|
|
|
|
R.rectx= rectx;
|
|
|
|
|
R.recty= recty;
|
|
|
|
|
R.afmx= afmx;
|
|
|
|
|
R.afmy= afmy;
|
|
|
|
|
R.rectot= rectot;
|
|
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
static void texture_preview_pixel(Tex *tex, int x, int y, char *rect, short pr_rectx, short pr_recty)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
float i, v1, xsq, ysq, texvec[3];
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
float tin=1.0f, tr, tg, tb, ta;
|
2002-10-12 11:37:38 +00:00
|
|
|
int rgbnor, tracol, skip=0;
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
if(tex->type==TEX_IMAGE) {
|
2005-12-21 22:21:43 +00:00
|
|
|
v1= 1.0f/pr_rectx;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
texvec[0]= 0.5+v1*x;
|
|
|
|
|
texvec[1]= 0.5+v1*y;
|
|
|
|
|
|
2003-04-30 13:22:26 +00:00
|
|
|
/* no coordinate mapping, exception: repeat */
|
2004-04-28 18:08:34 +00:00
|
|
|
if(tex->extend==TEX_REPEAT) {
|
|
|
|
|
if(tex->xrepeat>1) {
|
|
|
|
|
texvec[0] *= tex->xrepeat;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(texvec[0]>1.0f) texvec[0] -= (int)(texvec[0]);
|
2004-04-28 18:08:34 +00:00
|
|
|
}
|
|
|
|
|
if(tex->yrepeat>1) {
|
|
|
|
|
texvec[1] *= tex->yrepeat;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(texvec[1]>1.0f) texvec[1] -= (int)(texvec[1]);
|
2004-04-28 18:08:34 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2004-04-29 16:33:08 +00:00
|
|
|
else if(tex->extend==TEX_CHECKER) {
|
|
|
|
|
texvec[0]= 0.5+1.6*v1*x;
|
|
|
|
|
texvec[1]= 0.5+1.6*v1*y;
|
|
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else if(tex->type==TEX_ENVMAP) {
|
|
|
|
|
if(tex->env) {
|
|
|
|
|
ysq= y*y;
|
|
|
|
|
xsq= x*x;
|
2005-12-21 22:21:43 +00:00
|
|
|
if(xsq+ysq < (pr_rectx/2)*(pr_recty/2)) {
|
|
|
|
|
texvec[2]= sqrt( (float)((pr_rectx/2)*(pr_recty/2)-xsq-ysq) );
|
2002-10-12 11:37:38 +00:00
|
|
|
texvec[0]= -x;
|
|
|
|
|
texvec[1]= -y;
|
|
|
|
|
Normalise(texvec);
|
|
|
|
|
|
|
|
|
|
i= 2.0*(texvec[2]);
|
|
|
|
|
texvec[0]= (i*texvec[0]);
|
|
|
|
|
texvec[1]= (i*texvec[1]);
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
texvec[2]= (-1.0f+i*texvec[2]);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
skip= 1;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
tr= tg= tb= ta= 0.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
skip= 1;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
tr= tg= tb= ta= 0.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
2005-12-21 22:21:43 +00:00
|
|
|
v1= 2.0/pr_rectx;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
texvec[0]= v1*x;
|
|
|
|
|
texvec[1]= v1*y;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
texvec[2]= 0.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
if(skip==0) rgbnor= multitex_ext(tex, texvec, &tin, &tr, &tg, &tb, &ta);
|
2002-10-12 11:37:38 +00:00
|
|
|
else rgbnor= 1;
|
|
|
|
|
|
|
|
|
|
if(rgbnor & 1) {
|
|
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
v1= 255.0*tr;
|
2004-04-24 20:27:29 +00:00
|
|
|
rect[0]= CLAMPIS(v1, 0, 255);
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
v1= 255.0*tg;
|
2004-04-24 20:27:29 +00:00
|
|
|
rect[1]= CLAMPIS(v1, 0, 255);
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
v1= 255.0*tb;
|
2004-04-24 20:27:29 +00:00
|
|
|
rect[2]= CLAMPIS(v1, 0, 255);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(ta!=1.0f) {
|
2002-10-12 11:37:38 +00:00
|
|
|
tracol= 64+100*(abs(x)>abs(y));
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
tracol= (1.0f-ta)*tracol;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
rect[0]= tracol+ (rect[0]*ta) ;
|
|
|
|
|
rect[1]= tracol+ (rect[1]*ta) ;
|
|
|
|
|
rect[2]= tracol+ (rect[2]*ta) ;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
|
|
|
|
|
rect[3] = 0xFF;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
rect[0]= 255.0*tin;
|
|
|
|
|
rect[1]= 255.0*tin;
|
|
|
|
|
rect[2]= 255.0*tin;
|
2005-12-21 22:21:43 +00:00
|
|
|
rect[3] = 0xFF;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
static float pr1_lamp[3]= {2.3, -2.4, -4.6}; /* note; is not used! */
|
2002-10-12 11:37:38 +00:00
|
|
|
static float pr2_lamp[3]= {-8.8, -5.6, -1.5};
|
|
|
|
|
static float pr1_col[3]= {0.8, 0.8, 0.8};
|
|
|
|
|
static float pr2_col[3]= {0.5, 0.6, 0.7};
|
|
|
|
|
|
2003-12-16 14:12:01 +00:00
|
|
|
static void refraction_prv(int *x, int *y, float *n, float index)
|
|
|
|
|
{
|
|
|
|
|
float dot, fac, view[3], len;
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
index= 1.0f/index;
|
2003-12-18 21:34:48 +00:00
|
|
|
|
2003-12-16 14:12:01 +00:00
|
|
|
view[0]= index*(float)*x;
|
|
|
|
|
view[1]= ((float)*y)/index;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
view[2]= 20.0f;
|
2003-12-16 14:12:01 +00:00
|
|
|
len= Normalise(view);
|
|
|
|
|
|
|
|
|
|
dot= view[0]*n[0] + view[1]*n[1] + view[2]*n[2];
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(dot>0.0f) {
|
|
|
|
|
fac= 1.0f - (1.0f - dot*dot)*index*index;
|
|
|
|
|
if(fac<= 0.0f) return;
|
2003-12-16 14:12:01 +00:00
|
|
|
fac= -dot*index + sqrt(fac);
|
|
|
|
|
}
|
|
|
|
|
else {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
index = 1.0f/index;
|
|
|
|
|
fac= 1.0f - (1.0f - dot*dot)*index*index;
|
|
|
|
|
if(fac<= 0.0f) return;
|
2003-12-16 14:12:01 +00:00
|
|
|
fac= -dot*index - sqrt(fac);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*x= (int)(len*(index*view[0] + fac*n[0]));
|
|
|
|
|
*y= (int)(len*(index*view[1] + fac*n[1]));
|
|
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static void shade_lamp_loop_preview(ShadeInput *shi, ShadeResult *shr)
|
2002-10-12 11:37:38 +00:00
|
|
|
{
|
2003-12-22 22:27:51 +00:00
|
|
|
extern float fresnel_fac(float *view, float *vn, float ior, float fac);
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
Material *mat= shi->mat;
|
|
|
|
|
float inp, is, inprspec=0;
|
2005-12-09 15:14:32 +00:00
|
|
|
float lv[3], *la, *vn, vnor[3];
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
int a;
|
|
|
|
|
|
|
|
|
|
if((mat->mode & MA_RAYMIRROR)==0) shi->ray_mirror= 0.0f;
|
|
|
|
|
memset(shr, 0, sizeof(ShadeResult));
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
do_material_tex(shi);
|
|
|
|
|
|
|
|
|
|
shr->alpha= shi->alpha;
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
|
2003-12-23 22:31:48 +00:00
|
|
|
if(mat->mode & (MA_ZTRA|MA_RAYTRANSP))
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(mat->fresnel_tra!=0.0f)
|
|
|
|
|
shr->alpha*= fresnel_fac(shi->view, shi->vn, mat->fresnel_tra_i, mat->fresnel_tra);
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
if(mat->mode & MA_SHLESS) {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shr->diff[0]= shi->r;
|
|
|
|
|
shr->diff[1]= shi->g;
|
|
|
|
|
shr->diff[2]= shi->b;
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(mat->texco & TEXCO_REFL) {
|
|
|
|
|
inp= -2.0*(shi->vn[0]*shi->view[0]+shi->vn[1]*shi->view[1]+shi->vn[2]*shi->view[2]);
|
|
|
|
|
shi->ref[0]= (shi->view[0]+inp*shi->vn[0]);
|
|
|
|
|
shi->ref[1]= (shi->view[1]+inp*shi->vn[1]);
|
|
|
|
|
shi->ref[2]= (shi->view[2]+inp*shi->vn[2]);
|
|
|
|
|
/* normals in render are pointing different... rhm */
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
// if(shi->pr_type==MA_SPHERE)
|
|
|
|
|
// shi->ref[1]= -shi->ref[1];
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
}
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
for(a=0; a<2; a++) {
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if((mat->pr_lamp & (1<<a))==0) continue;
|
2004-06-30 18:54:09 +00:00
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
if(a==0) la= pr1_lamp;
|
|
|
|
|
else la= pr2_lamp;
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
lv[0]= shi->co[0]-la[0];
|
|
|
|
|
lv[1]= shi->co[1]-la[1];
|
|
|
|
|
lv[2]= shi->co[2]-la[2];
|
2002-10-12 11:37:38 +00:00
|
|
|
Normalise(lv);
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(shi->spec>0.0f) {
|
2005-12-09 15:14:32 +00:00
|
|
|
/* specular shaders */
|
|
|
|
|
float specfac;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-09 15:14:32 +00:00
|
|
|
if(mat->mode & MA_TANGENT_V) vn= shi->tang;
|
|
|
|
|
else vn= shi->vn;
|
|
|
|
|
|
|
|
|
|
if(mat->spec_shader==MA_SPEC_PHONG)
|
|
|
|
|
specfac= Phong_Spec(vn, lv, shi->view, shi->har, mat->mode & MA_TANGENT_V);
|
|
|
|
|
else if(mat->spec_shader==MA_SPEC_COOKTORR)
|
|
|
|
|
specfac= CookTorr_Spec(vn, lv, shi->view, shi->har, mat->mode & MA_TANGENT_V);
|
|
|
|
|
else if(mat->spec_shader==MA_SPEC_BLINN)
|
|
|
|
|
specfac= Blinn_Spec(vn, lv, shi->view, mat->refrac, (float)shi->har, mat->mode & MA_TANGENT_V);
|
|
|
|
|
else if(mat->spec_shader==MA_SPEC_WARDISO)
|
|
|
|
|
specfac= WardIso_Spec(vn, lv, shi->view, mat->rms, mat->mode & MA_TANGENT_V);
|
|
|
|
|
else
|
|
|
|
|
specfac= Toon_Spec(vn, lv, shi->view, mat->param[2], mat->param[3], mat->mode & MA_TANGENT_V);
|
|
|
|
|
|
|
|
|
|
inprspec= specfac*shi->spec;
|
|
|
|
|
|
|
|
|
|
if(mat->mode & MA_RAMP_SPEC) {
|
|
|
|
|
float spec[3];
|
|
|
|
|
do_specular_ramp(shi, specfac, inprspec, spec);
|
|
|
|
|
shr->spec[0]+= inprspec*spec[0];
|
|
|
|
|
shr->spec[1]+= inprspec*spec[1];
|
|
|
|
|
shr->spec[2]+= inprspec*spec[2];
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
shr->spec[0]+= inprspec*shi->specr;
|
|
|
|
|
shr->spec[1]+= inprspec*shi->specg;
|
|
|
|
|
shr->spec[2]+= inprspec*shi->specb;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
2005-12-09 15:14:32 +00:00
|
|
|
|
|
|
|
|
if(mat->mode & MA_TANGENT_V) {
|
|
|
|
|
float cross[3];
|
|
|
|
|
Crossf(cross, lv, shi->tang);
|
|
|
|
|
Crossf(vnor, cross, shi->tang);
|
|
|
|
|
vnor[0]= -vnor[0];vnor[1]= -vnor[1];vnor[2]= -vnor[2];
|
|
|
|
|
vn= vnor;
|
|
|
|
|
}
|
|
|
|
|
else vn= shi->vn;
|
|
|
|
|
|
|
|
|
|
is= vn[0]*lv[0]+vn[1]*lv[1]+vn[2]*lv[2];
|
|
|
|
|
if(is<0.0f) is= 0.0f;
|
|
|
|
|
|
2003-07-19 20:31:29 +00:00
|
|
|
/* diffuse shaders */
|
2005-12-09 15:14:32 +00:00
|
|
|
if(mat->diff_shader==MA_DIFF_ORENNAYAR) is= OrenNayar_Diff(vn, lv, shi->view, mat->roughness);
|
|
|
|
|
else if(mat->diff_shader==MA_DIFF_TOON) is= Toon_Diff(vn, lv, shi->view, mat->param[0], mat->param[1]);
|
|
|
|
|
else if(mat->diff_shader==MA_DIFF_MINNAERT) is= Minnaert_Diff(is, vn, shi->view, mat->darkness);
|
|
|
|
|
else if(mat->diff_shader==MA_DIFF_FRESNEL) is= Fresnel_Diff(vn, lv, shi->view, mat->param[0], mat->param[1]);
|
2003-07-19 20:31:29 +00:00
|
|
|
// else Lambert
|
2004-06-30 18:54:09 +00:00
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
inp= (shi->refl*is + shi->emit);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
if(a==0) la= pr1_col;
|
|
|
|
|
else la= pr2_col;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
|
|
|
|
|
add_to_diffuse(shr->diff, shi, is, inp*la[0], inp*la[1], inp*la[2]);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
/* end lamp loop */
|
2003-12-16 14:12:01 +00:00
|
|
|
|
|
|
|
|
/* drawing checkerboard and sky */
|
|
|
|
|
if(mat->mode & MA_RAYMIRROR) {
|
|
|
|
|
float col, div, y, z;
|
|
|
|
|
int fac;
|
|
|
|
|
|
|
|
|
|
/* rotate a bit in x */
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
y= shi->ref[1]; z= shi->ref[2];
|
|
|
|
|
shi->ref[1]= 0.98*y - 0.17*z;
|
|
|
|
|
shi->ref[2]= 0.17*y + 0.98*z;
|
2003-12-16 14:12:01 +00:00
|
|
|
|
|
|
|
|
/* scale */
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
div= (0.85f*shi->ref[1]);
|
2003-12-16 14:12:01 +00:00
|
|
|
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
shi->refcol[0]= shi->ray_mirror*fresnel_fac(shi->view, shi->vn, mat->fresnel_mir_i, mat->fresnel_mir);
|
2003-12-23 22:31:48 +00:00
|
|
|
/* not real 'alpha', but mirror overriding transparency */
|
|
|
|
|
if(mat->mode & MA_RAYTRANSP) {
|
|
|
|
|
float fac= sqrt(shi->refcol[0]);
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shr->alpha= shr->alpha*(1.0f-fac) + fac;
|
2003-12-23 22:31:48 +00:00
|
|
|
}
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
else shr->alpha= shr->alpha*(1.0f-shi->refcol[0]) + shi->refcol[0];
|
2003-12-23 22:31:48 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(div<0.0f) {
|
2003-12-16 14:12:01 +00:00
|
|
|
/* minus 0.5 prevents too many small tiles in distance */
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
fac= (int)(shi->ref[0]/(div-0.1f) ) + (int)(shi->ref[2]/(div-0.1f) );
|
|
|
|
|
if(fac & 1) col= 0.8f;
|
|
|
|
|
else col= 0.3f;
|
|
|
|
|
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
shi->refcol[1]= shi->refcol[0]*col;
|
|
|
|
|
shi->refcol[2]= shi->refcol[1];
|
|
|
|
|
shi->refcol[3]= shi->refcol[2];
|
2003-12-16 14:12:01 +00:00
|
|
|
}
|
|
|
|
|
else {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shi->refcol[1]= 0.0f;
|
|
|
|
|
shi->refcol[2]= shi->refcol[0]*0.3f*div;
|
|
|
|
|
shi->refcol[3]= shi->refcol[0]*0.8f*div;
|
2003-12-16 14:12:01 +00:00
|
|
|
}
|
|
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
else
|
|
|
|
|
shi->refcol[0]= 0.0f;
|
2004-06-30 18:54:09 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shr->diff[0]+= shi->ambr;
|
|
|
|
|
shr->diff[1]+= shi->ambg;
|
|
|
|
|
shr->diff[2]+= shi->ambb;
|
|
|
|
|
|
|
|
|
|
if(mat->mode & MA_RAMP_COL) ramp_diffuse_result(shr->diff, shi);
|
|
|
|
|
if(mat->mode & MA_RAMP_SPEC) ramp_spec_result(shr->spec, shr->spec+1, shr->spec+2, shi);
|
2004-06-30 18:54:09 +00:00
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
/* refcol */
|
|
|
|
|
if(shi->refcol[0]!=0.0f) {
|
|
|
|
|
shr->diff[0]= shi->mirr*shi->refcol[1] + (1.0f - shi->mirr*shi->refcol[0])*shr->diff[0];
|
|
|
|
|
shr->diff[1]= shi->mirg*shi->refcol[2] + (1.0f - shi->mirg*shi->refcol[0])*shr->diff[1];
|
|
|
|
|
shr->diff[2]= shi->mirb*shi->refcol[3] + (1.0f - shi->mirb*shi->refcol[0])*shr->diff[2];
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
|
|
|
|
|
/* ztra shade */
|
|
|
|
|
if(shi->spectra!=0.0f) {
|
|
|
|
|
inp = MAX3(shr->spec[0], shr->spec[1], shr->spec[2]);
|
|
|
|
|
inp *= shi->spectra;
|
|
|
|
|
if(inp>1.0f) inp= 1.0f;
|
|
|
|
|
shr->alpha= (1.0f-inp)*shr->alpha+inp;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2006-01-04 12:41:13 +00:00
|
|
|
}
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
static void shade_preview_pixel(ShadeInput *shi, float *vec, int x, int y, char *rect, short pr_rectx, short pr_recty)
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
{
|
|
|
|
|
Material *mat;
|
|
|
|
|
ShadeResult shr;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
float v1;
|
|
|
|
|
float eul[3], tmat[3][3], imat[3][3], col[4];
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
|
|
|
|
|
mat= shi->mat;
|
|
|
|
|
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
v1= 0.5/pr_rectx;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shi->view[0]= v1*x;
|
|
|
|
|
shi->view[1]= v1*y;
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
shi->view[2]= -1.0f;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
Normalise(shi->view);
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
shi->xs= x + pr_rectx/2;
|
|
|
|
|
shi->ys= y + pr_recty/2;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
|
|
|
|
|
shi->refcol[0]= shi->refcol[1]= shi->refcol[2]= shi->refcol[3]= 0.0f;
|
|
|
|
|
VECCOPY(shi->co, vec);
|
|
|
|
|
|
|
|
|
|
/* texture handling */
|
|
|
|
|
if(mat->texco) {
|
|
|
|
|
|
|
|
|
|
VECCOPY(shi->lo, vec);
|
|
|
|
|
|
|
|
|
|
if(mat->pr_type==MA_CUBE) {
|
|
|
|
|
|
|
|
|
|
eul[0]= (297)*M_PI/180.0;
|
|
|
|
|
eul[1]= 0.0;
|
|
|
|
|
eul[2]= (45)*M_PI/180.0;
|
|
|
|
|
EulToMat3(eul, tmat);
|
|
|
|
|
|
|
|
|
|
MTC_Mat3MulVecfl(tmat, shi->lo);
|
|
|
|
|
MTC_Mat3MulVecfl(tmat, shi->vn);
|
|
|
|
|
/* hack for cubemap, why!!! */
|
|
|
|
|
SWAP(float, shi->vn[0], shi->vn[1]);
|
|
|
|
|
}
|
|
|
|
|
/* textures otherwise upside down */
|
|
|
|
|
if(mat->pr_type==MA_CUBE || mat->pr_type==MA_SPHERE)
|
|
|
|
|
shi->lo[2]= -shi->lo[2];
|
|
|
|
|
|
|
|
|
|
if(mat->texco & TEXCO_GLOB) {
|
|
|
|
|
VECCOPY(shi->gl, shi->lo);
|
|
|
|
|
}
|
|
|
|
|
if(mat->texco & TEXCO_WINDOW) {
|
|
|
|
|
VECCOPY(shi->winco, shi->lo);
|
|
|
|
|
}
|
|
|
|
|
if(mat->texco & TEXCO_STICKY) {
|
|
|
|
|
VECCOPY(shi->sticky, shi->lo);
|
|
|
|
|
}
|
|
|
|
|
if(mat->texco & TEXCO_UV) {
|
|
|
|
|
VECCOPY(shi->uv, shi->lo);
|
|
|
|
|
}
|
|
|
|
|
if(mat->texco & TEXCO_STRAND) {
|
|
|
|
|
shi->strand= shi->lo[0];
|
|
|
|
|
}
|
|
|
|
|
if(mat->texco & TEXCO_OBJECT) {
|
|
|
|
|
/* nothing */
|
|
|
|
|
}
|
|
|
|
|
if(mat->texco & (TEXCO_NORM)) {
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
//shi->orn[0]= shi->vn[0];
|
|
|
|
|
//shi->orn[1]= shi->vn[1];
|
|
|
|
|
//shi->orn[2]= shi->vn[2];
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Clear displase vec for preview */
|
|
|
|
|
shi->displace[0]= shi->displace[1]= shi->displace[2]= 0.0;
|
|
|
|
|
|
|
|
|
|
if(mat->pr_type==MA_CUBE) {
|
|
|
|
|
/* rotate normal back for normals texture */
|
|
|
|
|
SWAP(float, shi->vn[0], shi->vn[1]);
|
|
|
|
|
MTC_Mat3Inv(imat, tmat);
|
|
|
|
|
MTC_Mat3MulVecfl(imat, shi->vn);
|
|
|
|
|
}
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
if(mat->mapto & MAP_DISPLACE) { /* Quick hack of fake displacement preview */
|
|
|
|
|
// shi->vn[0]-=2.0*shi->displace[2];
|
|
|
|
|
// shi->vn[1]-=2.0*shi->displace[0];
|
|
|
|
|
// shi->vn[2]+=2.0*shi->displace[1];
|
|
|
|
|
// Normalise(shi->vn);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
VECCOPY(shi->vno, shi->vn);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(mat->nodetree && mat->use_nodes) {
|
|
|
|
|
ntreeShaderExecTree(mat->nodetree, shi, &shr);
|
|
|
|
|
}
|
|
|
|
|
else {
|
2006-01-02 17:40:03 +00:00
|
|
|
/* copy all relevant material vars, note, keep this synced with render_types.h */
|
|
|
|
|
memcpy(&shi->r, &mat->r, 23*sizeof(float));
|
|
|
|
|
shi->har= mat->har;
|
|
|
|
|
|
More node goodies!
First note; this is a WIP project, some commits might change things that
make formerly saved situations not to work identically... like now!
------ New Material integration ------
Until now, the Node system worked on top of the 'current' Material, just
like how the Material Layers worked. That's quite confusing in practice,
especially to see what Material is a Node, or what is the "base material"
Best solution is to completely separate the two. This has been implemented
as follows now;
- The confusing "Input" node has been removed.
- When choosing a Material in Blender, you can define this Material to be
either 'normal' (default) or be the root of a Node tree.
- If a Material is a Node tree, you have to add Nodes in the tree to see
something happen. An empty Node tree doesn't do anything (black).
- If a Material is a Node Tree, the 'data browse' menus show it with an
'N' mark before the name. The 'data block' buttons display it with the
suffix 'NT' (instead of 'MA').
- In a Node Tree, any Material can be inserted, including itself. Only in
that case the Material is being used itself for shading.
UI changes:
Added a new Panel "Links", which shows:
- where the Material is linked to (Object, Mesh, etc)
- if the Material is a NodeTree or not
- the actual active Material in the Tree
The "Node" Panel itself now only shows buttons from the other nodes, when
they are active.
Further the Material Nodes themselves allow browsing and renaming or adding
new Materials now too.
Second half of today's work was cleaning up selection when the Nodes
overlap... it was possible to drag links from invisible sockets, or click
headers for invisible nodes, etc. This because the mouse input code was
not checking for visibility yet.
Works now even for buttons. :)
2005-12-29 18:08:01 +00:00
|
|
|
shade_lamp_loop_preview(shi, &shr);
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
shi->mat= mat; /* restore, shade input is re-used! */
|
|
|
|
|
|
|
|
|
|
/* after shading and composit layers */
|
|
|
|
|
if(shr.spec[0]<0.0f) shr.spec[0]= 0.0f;
|
|
|
|
|
if(shr.spec[1]<0.0f) shr.spec[1]= 0.0f;
|
|
|
|
|
if(shr.spec[2]<0.0f) shr.spec[2]= 0.0f;
|
|
|
|
|
|
|
|
|
|
if(shr.diff[0]<0.0f) shr.diff[0]= 0.0f;
|
|
|
|
|
if(shr.diff[1]<0.0f) shr.diff[1]= 0.0f;
|
|
|
|
|
if(shr.diff[2]<0.0f) shr.diff[2]= 0.0f;
|
|
|
|
|
|
|
|
|
|
VECADD(col, shr.diff, shr.spec);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
col[3]= shr.alpha;
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
/* handle backdrop now */
|
|
|
|
|
|
|
|
|
|
if(col[3]!=1.0f) {
|
|
|
|
|
float back, backm;
|
|
|
|
|
|
|
|
|
|
/* distorts x and y */
|
2003-12-16 14:12:01 +00:00
|
|
|
if(mat->mode & MA_RAYTRANSP) {
|
Biiig commit! Thanks to 2-3 weeks of cvs freeze...
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
2004-12-27 19:28:52 +00:00
|
|
|
refraction_prv(&x, &y, shi->vn, shi->ang);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2003-12-16 14:12:01 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
back= previewbackf(mat->pr_back, x, y);
|
|
|
|
|
backm= (1.0f-shr.alpha)*back;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-01-24 14:08:06 +00:00
|
|
|
if((mat->mode & MA_RAYTRANSP) && mat->filter!=0.0) {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
float fr= 1.0f+ mat->filter*(shr.diff[0]-1.0f);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
col[0]= fr*backm+ (col[3]*col[0]);
|
|
|
|
|
fr= 1.0f+ mat->filter*(shr.diff[1]-1.0f);
|
|
|
|
|
col[1]= fr*backm+ (col[3]*col[1]);
|
|
|
|
|
fr= 1.0f+ mat->filter*(shr.diff[2]-1.0f);
|
|
|
|
|
col[2]= fr*backm+ (col[3]*col[2]);
|
2005-01-24 14:08:06 +00:00
|
|
|
}
|
|
|
|
|
else {
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
col[0]= backm + (col[3]*col[0]);
|
|
|
|
|
col[1]= backm + (col[3]*col[1]);
|
|
|
|
|
col[2]= backm + (col[3]*col[2]);
|
2005-01-24 14:08:06 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
|
|
|
|
if(col[0]<=0.0f) rect[0]= 0; else if(col[0]>=1.0f) rect[0]= 255; else rect[0]= (char)(255.0f*col[0]);
|
|
|
|
|
if(col[1]<=0.0f) rect[1]= 0; else if(col[1]>=1.0f) rect[1]= 255; else rect[1]= (char)(255.0f*col[1]);
|
|
|
|
|
if(col[2]<=0.0f) rect[2]= 0; else if(col[2]>=1.0f) rect[2]= 255; else rect[2]= (char)(255.0f*col[2]);
|
|
|
|
|
if(col[3]<=0.0f) rect[3]= 0; else if(col[3]>=1.0f) rect[3]= 255; else rect[3]= (char)(255.0f*col[3]);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
static void preview_init_render_textures(MTex **mtex)
|
|
|
|
|
{
|
|
|
|
|
int x;
|
|
|
|
|
|
|
|
|
|
for(x=0; x<MAX_MTEX; x++) {
|
|
|
|
|
if(mtex[x]) {
|
|
|
|
|
if(mtex[x]->tex) {
|
|
|
|
|
init_render_texture(mtex[x]->tex);
|
|
|
|
|
|
|
|
|
|
if(mtex[x]->tex->env && mtex[x]->tex->env->object)
|
|
|
|
|
MTC_Mat4One(mtex[x]->tex->env->object->imat);
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
if(mtex[x]->object) MTC_Mat4One(mtex[x]->object->imat);
|
|
|
|
|
if(mtex[x]->object) MTC_Mat4One(mtex[x]->object->imat);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
/* main previewrender loop */
|
|
|
|
|
void BIF_previewrender(struct ID *id, struct RenderInfo *ri, struct ScrArea *area, int pr_method)
|
2005-12-21 22:21:43 +00:00
|
|
|
{
|
|
|
|
|
static double lasttime= 0;
|
|
|
|
|
Material *mat= NULL;
|
|
|
|
|
Tex *tex= NULL;
|
|
|
|
|
Lamp *la= NULL;
|
|
|
|
|
World *wrld= NULL;
|
|
|
|
|
LampRen *lar= NULL;
|
|
|
|
|
Image *ima;
|
|
|
|
|
HaloRen har;
|
|
|
|
|
Object *ob;
|
|
|
|
|
ShadeInput shi;
|
|
|
|
|
float lens = 0.0, vec[3];
|
|
|
|
|
int x, y, starty, startx, endy, endx, radsq, xsq, ysq, last = 0;
|
|
|
|
|
unsigned int *rect;
|
|
|
|
|
|
|
|
|
|
if(ri->cury>=ri->pr_rectx) return;
|
|
|
|
|
|
|
|
|
|
ob= ((G.scene->basact)? (G.scene->basact)->object: 0);
|
|
|
|
|
|
|
|
|
|
switch(GS(id->name))
|
|
|
|
|
{
|
|
|
|
|
case ID_MA:
|
|
|
|
|
mat = (Material*)id; break;
|
|
|
|
|
case ID_TE:
|
|
|
|
|
tex = (Tex*)id; break;
|
|
|
|
|
case ID_LA:
|
|
|
|
|
la = (Lamp*)id; break;
|
|
|
|
|
case ID_WO:
|
|
|
|
|
wrld = (World*)id; break;
|
|
|
|
|
default:
|
|
|
|
|
return;
|
|
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2003-04-30 13:22:26 +00:00
|
|
|
har.flarec= 0; /* below is a test for postrender flare */
|
2005-12-21 22:21:43 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
/* no event escape for icon render */
|
|
|
|
|
if(pr_method!=PR_ICON_RENDER && qtest()) {
|
2002-10-12 11:37:38 +00:00
|
|
|
addafterqueue(curarea->win, RENDERPREVIEW, 1);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
MTC_Mat4One(R.viewmat);
|
|
|
|
|
MTC_Mat4One(R.viewinv);
|
|
|
|
|
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
shi.osatex= 0;
|
2003-12-16 14:12:01 +00:00
|
|
|
|
2003-10-07 18:24:02 +00:00
|
|
|
if(mat) {
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
/* rendervars */
|
|
|
|
|
init_render_world();
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
init_render_material(mat); /* does nodes too */
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
/* also clears imats */
|
|
|
|
|
preview_init_render_textures(mat->mtex);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
/* do the textures for nodes */
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(mat->nodetree && mat->use_nodes) {
|
|
|
|
|
bNode *node;
|
|
|
|
|
for(node=mat->nodetree->nodes.first; node; node= node->next) {
|
|
|
|
|
if(node->id && GS(node->id->name)==ID_MA) {
|
|
|
|
|
Material *ma= (Material *)node->id;
|
|
|
|
|
preview_init_render_textures(ma->mtex);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
/* signal to node editor to store previews or not */
|
|
|
|
|
if(pr_method==PR_ICON_RENDER) {
|
|
|
|
|
shi.do_preview= 0;
|
|
|
|
|
}
|
|
|
|
|
else {
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
ntreeInitPreview(mat->nodetree, ri->pr_rectx, ri->pr_recty);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
shi.do_preview= 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shi.vlr= NULL;
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
shi.mat= mat;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
shi.pr_type= mat->pr_type;
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
if(mat->mode & MA_HALO) init_previewhalo(&har, mat, ri->pr_rectx, ri->pr_recty);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
|
|
|
|
set_node_shader_lamp_loop(shade_lamp_loop_preview);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2003-10-07 18:24:02 +00:00
|
|
|
else if(tex) {
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
ima= tex->ima;
|
|
|
|
|
if(ima) last= ima->lastframe;
|
|
|
|
|
init_render_texture(tex);
|
|
|
|
|
free_unused_animimages();
|
|
|
|
|
if(tex->ima) {
|
2003-10-07 18:24:02 +00:00
|
|
|
if(tex->ima!=ima) allqueue(REDRAWBUTSSHADING, 0);
|
|
|
|
|
else if(last!=ima->lastframe) allqueue(REDRAWBUTSSHADING, 0);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
if(tex->env && tex->env->object)
|
|
|
|
|
MTC_Mat4Invert(tex->env->object->imat, tex->env->object->obmat);
|
|
|
|
|
}
|
2003-10-07 18:24:02 +00:00
|
|
|
else if(la) {
|
|
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
init_render_world();
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
preview_init_render_textures(la->mtex);
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
/* lar= ((GroupObject *)R.lights.first)->lampren;
|
|
|
|
|
RE_add_render_lamp(ob, 0); */ /* 0=no shadbuf or tables */
|
|
|
|
|
|
|
|
|
|
/* elubie: not nice, but ob contains current object, not usable if you
|
|
|
|
|
need to render lamp that's not active object :( */
|
|
|
|
|
lar = create_preview_render_lamp(la);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2003-04-30 13:22:26 +00:00
|
|
|
/* exceptions: */
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
lar->spottexfac= 1.0f;
|
|
|
|
|
lar->spotsi= cos( M_PI/3.0f );
|
|
|
|
|
lar->spotbl= (1.0f-lar->spotsi)*la->spotblend;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
MTC_Mat3One(lar->imat);
|
|
|
|
|
}
|
2003-10-07 18:24:02 +00:00
|
|
|
else if(wrld) {
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
lens= 35.0;
|
|
|
|
|
if(G.scene->camera) {
|
|
|
|
|
lens= ( (Camera *)G.scene->camera->data)->lens;
|
2004-04-12 14:53:17 +00:00
|
|
|
|
2004-04-14 12:52:35 +00:00
|
|
|
/* needed for init_render_world */
|
|
|
|
|
MTC_Mat4CpyMat4(R.viewinv, G.scene->camera->obmat);
|
|
|
|
|
MTC_Mat4Ortho(R.viewinv);
|
|
|
|
|
MTC_Mat4Invert(R.viewmat, R.viewinv);
|
|
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
init_preview_world(wrld);
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
preview_init_render_textures(wrld->mtex);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
if(ri->rect==NULL) {
|
|
|
|
|
ri->rect= MEM_callocN(sizeof(int)*ri->pr_rectx*ri->pr_recty, "butsrect");
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
starty= -ri->pr_recty/2;
|
|
|
|
|
endy= starty+ri->pr_recty;
|
|
|
|
|
starty+= ri->cury;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
startx= -ri->pr_rectx/2;
|
|
|
|
|
endx= startx+ri->pr_rectx;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
radsq= (ri->pr_rectx/2)*(ri->pr_recty/2);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
if(mat) {
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
pr1_lamp[0]= -2.3; pr1_lamp[1]= 2.4; pr1_lamp[2]= 4.6;
|
|
|
|
|
pr2_lamp[0]= 8.8; pr2_lamp[1]= 5.6; pr2_lamp[2]= 1.5;
|
2006-01-02 13:08:23 +00:00
|
|
|
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2003-10-11 00:21:05 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if (pr_method==PR_DRAW_RENDER)
|
|
|
|
|
glDrawBuffer(GL_FRONT);
|
2003-10-11 00:21:05 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
/* here it starts! */
|
2002-10-12 11:37:38 +00:00
|
|
|
for(y=starty; y<endy; y++) {
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
rect= ri->rect + ri->pr_rectx*ri->cury;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(mat) {
|
2002-10-12 11:37:38 +00:00
|
|
|
|
|
|
|
|
if(mat->mode & MA_HALO) {
|
|
|
|
|
for(x=startx; x<endx; x++, rect++) {
|
|
|
|
|
rect[0]= previewback(mat->pr_back, x, y);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if(har.flarec) {
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if(y==endy-2) previewflare(ri, &har, ri->pr_rectx, ri->pr_recty, pr_method);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
2005-12-21 22:21:43 +00:00
|
|
|
halo_preview_pixel(&har, startx, endx, y, (char *) (rect-ri->pr_rectx), ri->pr_rectx);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
ysq= y*y;
|
|
|
|
|
for(x=startx; x<endx; x++, rect++) {
|
|
|
|
|
xsq= x*x;
|
|
|
|
|
if(mat->pr_type==MA_SPHERE) {
|
|
|
|
|
|
2003-12-18 21:34:48 +00:00
|
|
|
if(xsq+ysq <= radsq) {
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
shi.vn[0]= -x;
|
|
|
|
|
shi.vn[1]= -y;
|
|
|
|
|
shi.vn[2]= -sqrt( (float)(radsq-xsq-ysq) );
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
Normalise(shi.vn);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Phew, a lot of work, and no new features...
Main target was to make the inner rendering loop using no globals anymore.
This is essential for proper usage while raytracing, it caused a lot of
hacks in the raycode as well, which even didn't work correctly for all
situations (textures especially).
Done this by creating a new local struct RenderInput, which replaces usage
of the global struct Render R. The latter now only is used to denote
image size, viewmatrix, and the like.
Making the inner render loops using no globals caused 1000s of vars to
be changed... but the result definitely is much nicer code, which enables
making 'real' shaders in a next stage.
It also enabled me to remove the hacks from ray.c
Then i went to the task of removing redundant code. Especially the calculus
of texture coords took place (identical) in three locations.
Most obvious is the change in the unified render part, which is much less
code now; it uses the same rendering routines as normal render now.
(Note; not for halos yet!)
I also removed 6 files called 'shadowbuffer' something. This was experimen-
tal stuff from NaN days. And again saved a lot of double used code.
Finally I went over the blenkernel and blender/src calls to render stuff.
Here the same local data is used now, resulting in less dependency.
I also moved render-texture to the render module, this was still in Kernel.
(new file: texture.c)
So! After this commit I will check on the autofiles, to try to fix that.
MSVC people have to do it themselves.
This commit will need quite some testing help, but I'm around!
2003-12-21 21:52:51 +00:00
|
|
|
vec[0]= shi.vn[0];
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
vec[1]= shi.vn[1];
|
|
|
|
|
vec[2]= -shi.vn[2];
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-09 15:14:32 +00:00
|
|
|
if(mat->mode & MA_TANGENT_V) {
|
|
|
|
|
float tmp[3];
|
|
|
|
|
tmp[0]=tmp[2]= 0.0f;
|
|
|
|
|
tmp[1]= 1.0f;
|
|
|
|
|
Crossf(shi.tang, tmp, shi.vn);
|
|
|
|
|
Normalise(shi.tang);
|
|
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
shade_preview_pixel(&shi, vec, x, y, (char *)rect, ri->pr_rectx, ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
rect[0]= previewback(mat->pr_back, x, y);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
|
|
|
|
if(pr_method!=PR_ICON_RENDER && mat->nodetree && mat->use_nodes)
|
|
|
|
|
ntreeClearPixelTree(mat->nodetree, x+ri->pr_rectx/2, y+ri->pr_recty/2);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else if(mat->pr_type==MA_CUBE) {
|
2005-12-21 22:21:43 +00:00
|
|
|
if( ray_previewrender(x, y, vec, shi.vn, ri->pr_rectx, ri->pr_recty) ) {
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
shade_preview_pixel(&shi, vec, x, y, (char *)rect, ri->pr_rectx, ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
rect[0]= previewback(mat->pr_back, x, y);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
|
|
|
|
if(pr_method!=PR_ICON_RENDER && mat->nodetree && mat->use_nodes)
|
|
|
|
|
ntreeClearPixelTree(mat->nodetree, x+ri->pr_rectx/2, y+ri->pr_recty/2);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
2005-12-21 22:21:43 +00:00
|
|
|
vec[0]= x*(2.0f/ri->pr_rectx);
|
|
|
|
|
vec[1]= y*(2.0f/ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
vec[2]= 0.0;
|
|
|
|
|
|
Orange branch feature; Material Layering
(WIP, don't bugs for this in tracker yet please!)
- New Panel "Layers" in Material buttons, allows to add unlimited amount
of materials on top of each other.
- Every Layer is actually just another Material, which gets rendered/shaded
(including texture), and then added on top of previous layer with an
operation like Mix, Add, Mult, etc.
- Layers render fully independent, so bumpmaps are not passed on to next
layers.
- Per Layer you can set if it influences Diffuse, Specular or Alpha
- If a Material returns alpha (like from texture), the alpha value is
used for adding the layers too.
- New texture "Map To" channel allows to have a texture work on a Layer
- Each layer, including basis Material, can be turned on/off individually
Notes:
- at this moment, the full shading pass happens for each layer, including
shadow, AO and raytraced mirror or transparency...
- I had to remove old hacks from preview render, which corrected reflected
normals for preview texturing.
- still needs loadsa testing!
2005-12-04 14:32:21 +00:00
|
|
|
shi.vn[0]= shi.vn[1]= 0.0f;
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
shi.vn[2]= -1.0f;
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
shade_preview_pixel(&shi, vec, x, y, (char *)rect, ri->pr_rectx, ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
2003-10-07 18:24:02 +00:00
|
|
|
else if(tex) {
|
2002-10-12 11:37:38 +00:00
|
|
|
for(x=startx; x<endx; x++, rect++) {
|
2005-12-21 22:21:43 +00:00
|
|
|
texture_preview_pixel(tex, x, y, (char *)rect, ri->pr_rectx, ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
2003-10-07 18:24:02 +00:00
|
|
|
else if(la) {
|
2002-10-12 11:37:38 +00:00
|
|
|
for(x=startx; x<endx; x++, rect++) {
|
2005-12-21 22:21:43 +00:00
|
|
|
lamp_preview_pixel(&shi, lar, x, y, (char *)rect, ri->pr_rectx, ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
for(x=startx; x<endx; x++, rect++) {
|
2005-12-21 22:21:43 +00:00
|
|
|
sky_preview_pixel(lens, x, y, (char *)rect, ri->pr_rectx, ri->pr_recty);
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if (pr_method!=PR_ICON_RENDER) {
|
2005-12-21 22:21:43 +00:00
|
|
|
if(y<endy-2) {
|
|
|
|
|
if(qtest()) {
|
|
|
|
|
addafterqueue(curarea->win, RENDERPREVIEW, 1);
|
|
|
|
|
break;
|
|
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
display_pr_scanline(ri->rect, ri->cury, ri->pr_rectx);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
/* flush opengl for cards with frontbuffer slowness */
|
|
|
|
|
if(ri->cury==ri->pr_recty-1 || (PIL_check_seconds_timer() - lasttime > 0.05)) {
|
|
|
|
|
lasttime= PIL_check_seconds_timer();
|
|
|
|
|
glFlush();
|
|
|
|
|
}
|
2005-01-07 21:48:25 +00:00
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
ri->cury++;
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if (pr_method==PR_DRAW_RENDER) {
|
2005-12-21 22:21:43 +00:00
|
|
|
if(ri->cury>=ri->pr_recty && tex)
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
draw_tex_crop((Tex*)id);
|
2002-10-12 11:37:38 +00:00
|
|
|
|
2005-12-21 22:21:43 +00:00
|
|
|
glDrawBuffer(GL_BACK);
|
|
|
|
|
/* draw again for clean swapbufers */
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
previewdraw_render(ri, area);
|
2005-12-21 22:21:43 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
if(lar) {
|
|
|
|
|
MEM_freeN(lar);
|
2005-12-21 22:21:43 +00:00
|
|
|
/*
|
Orange branch: Revived hidden treasure, the Groups!
Previous experiment (in 2000) didn't satisfy, it had even some primitive
NLA option in groups... so, cleaned up the old code (removed most) and
integrated it back in a more useful way.
Usage:
- CTRL+G gives menu to add group, add to existing group, or remove from
groups.
- In Object buttons, a new (should become first) Panel was added, showing
not only Object "ID button" and Parent, but also the Groups the Object
Belongs to. These buttons also allow rename, assigning or removing.
- To indicate Objects are grouped, they're drawn in a (not theme yet, so
temporal?) green wire color.
- Use ALT+SHIFT mouse-select to (de)select an entire group
But, the real power of groups is in the following features:
-> Particle Force field and Guide control
In the "Particle Motion" Panel, you can indicate a Group name, this then
limits force fields or guides to members of that Group. (Note that layers
still work on top of that... not sure about that).
-> Light Groups
In the Material "Shaders" Panel, you can indicate a Group name to limit
lighting for the Material to lamps in this group. The Lights in a Group do
need to be 'visible' for the Scene to be rendered (as usual).
-> Group Duplicator
In the Object "Anim" Panel, you can set any Object (use Empty!) to
duplicate an entire Group. It will make copies of all Objects in that Group.
Also works for animated Objects, but it will copy the current positions or
deforms. Control over 'local timing' (so we can do Massive anims!) will be
added later.
(Note; this commit won't render Group duplicators yet, a fix in bf-blender
will enable that, next commit will sync)
-> Library Appending
In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed.
By appending or linking the Group itself, and use the Group Duplicator, you
now can animate and position linked Objects. The nice thing is that the
local saved file itself will only store the Group name that was linked, so
on a next file read, the Group Objects will be re-read as stored (changed)
in the Library file.
(Note; current implementation also "gives a base" to linked Group Objects,
to show them as Objects in the current Scene. Need that now for testing
purposes, but probably will be removed later).
-> Outliner
Outliner now shows Groups as optio too, nice to organize your data a bit too!
In General, Groups have a very good potential... for example, it could
become default for MetaBall Objects too (jiri, I can help you later on how
this works). All current 'layer relationships' in Blender should be dropped
in time, I guess...
2005-12-06 10:55:30 +00:00
|
|
|
MEM_freeN(R.lights.first);
|
|
|
|
|
R.lights.first= R.lights.last= NULL;
|
2005-12-21 22:21:43 +00:00
|
|
|
*/
|
Area lights and more...
- New lamp type added "Area". This uses the radiosity formula (Stoke) to
calculate the amount of energy which is received from a plane. Result
is very nice local light, which nicely spreads out.
- Area lamps have a 'gamma' option to control the light spread
- Area lamp builtin sizes: square, rect, cube & box. Only first 2 are
implemented. Set a type, and define area size
- Button area size won't affect the amount of energy. But scaling the lamp
in 3d window will do. This is to cover the case when you scale an entire
scene, the light then will remain identical
If you just want to change area lamp size, use buttons when you dont want
to make the scene too bright or too dark
- Since area lights realistically are sensitive for distance (quadratic), the
effect it has is quickly too much, or too less. For this the "Dist" value
in Lamp can be used. Set it at Dist=10 to have reasonable light on distance
10 Blender units (assumed you didnt scale lamp object).
- I tried square sized specularity, but this looked totally weird. Not
committed
- Plan is to extend area light with 3d dimensions, boxes and cubes.
- Note that area light is one-sided, towards negative Z. I need to design
a nice drawing method for it.
Area Shadow
- Since there are a lot of variables associated with soft shadow, they now
only are available for Area lights. Allowing spot & normal lamp to have
soft shadow is possible though, but will require a reorganisation of the
Lamp buttons. Is a point of research & feedback still.
- Apart from area size, you now can individually set amount of samples in
X and Y direction (for area lamp type 'Rect'). For box type area lamp,
this will become 3 dimensions
- Area shadows have four options:
"Clip circle" : only uses a circular shape of samples, gives smoother
results
"Dither" : use a 2x2 dither mask
"Jitter" : applys a pseudo-random offset to samples
"Umbra" : extra emphasis on area that's fully in shadow.
Raytrace speedup
- improved filling in faces in Octree. Large faces occupied too many nodes
- added a coherence check; rays fired sequentially that begin and end in
same octree nodes, and that don't intersect, are quickly rejected
- rendering shadow scenes benefits from this 20-40%. My statue test monkey
file now renders in 19 seconds (was 30).
Plus:
- adjusted specular max to 511, and made sure Blinn spec has again this
incredible small spec size
- for UI rounded theme: the color "button" displayed RGB color too dark
- fixed countall() function, to also include Subsurf totals
- removed setting the 'near' clipping for pressing dot-key numpad
- when you press the buttons-window icon for 'Shading Context' the context
automaticilly switches as with F5 hotkey
Please be warned that this is not a release... settings in files might not
work as it did, nor guaranteed to work when we do a release. :)
2003-12-29 16:52:51 +00:00
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
Orange: more noodle updates!
**** NEW: Group Nodes
Node trees usually become messy and confusing quickly, so we need
not only a way to collapse Nodes into single 'groups', but also a
way to re-use that data to create libraries of effects.
This has been done by making a new Library data type, the NodeTree.
Everything that has been grouped is stored here, and available for
re-use, appending or linking. These NodeTrees are fully generic,
i.e. can store shader trees, composit trees, and so on. The 'type'
value as stored in the NodeTree will keep track of internal type
definitions and execute/drawing callbacks. Needless to say, re-using
shader trees in a composit tree is a bit useless, and will be
prevented in the browsing code. :)
So; any NodeTree can become a "Goup Node" inside in a NodeTree. This
Group Node then works just like any Node.
To prevent the current code to become too complex, I've disabled
the possibility to insert Groups inside of Groups. That might be
enabled later, but is a real nasty piece of code to get OK.
Since Group Nodes are a dynamic Node type, a lot of work has been
done to ensure Node definitions can be dynamic too, but still allow
to be stored in files, and allow to be verified for type-definition
changes on reloading. This system needs a little bit maturing still,
so the Python gurus should better wait a little bit! (Also for me to
write the definite API docs for it).
What works now:
- Press CTRL+G to create a new Group. The grouping code checks for
impossible selections (like an unselected node between selected nodes).
Everthing that's selected then gets removed from the current tree, and
inserted in a new NodeTree library data block. A Group Node then is
added which links to this new NodeTree.
- Press ALT+G to ungroup. This will not delete the NodeTree library
data, but just duplicate the Group into the current tree.
- Press TAB, or click on the NodeTree icon to edit Groups. Note that
NodeTrees are instances, so editing one Group will also change the
other users.
This also means that when removing nodes in a Group (or hiding sockets
or changing internal links) this is immediately corrected for all users
of this Group, also in other Materials.
- While editing Groups, only the internal Nodes can be edited. A single
click outside of the Group boundary will close this 'edit mode'.
What needs to be done:
- SHIFT+A menu in toolbox style, also including a list of Groups
- Enable the single-user button in the Group Node
- Displaying all (visible) internal group UI elements in the Node Panel
- Enable Library linking and prevent editing of Groups then.
**** NEW: Socket Visibility control
Node types will be generated with a lot of possible inputs or outputs,
and drawing all sockets all the time isn't very useful then.
A new option in the Node header ('plus' icon) allows to either hide all
unused sockets (first keypress) or to reveil them (when there are hidden
sockets, the icon displays black, otherwise it's blended).
Hidden sockets in Nodes also are not exported to a Group, so this way
you can control what options (in/outputs) exactly are available.
To be done:
- a way to hide individual sockets, like with a RMB click on it.
**** NEW: Nodes now render!
This is still quite primitive, more on a level to replace the (now
obsolete and disabled) Material Layers.
What needs to be done:
- make the "Geometry" node work properly, also for AA textures
- make the Texture Node work (does very little at the moment)
- give Material Nodes all inputs as needed (like Map-to Panel)
- find a way to export more data from a Material Node, like the
shadow value, or light intensity only, etc
Very important also to separate from the Material Buttons the
"global" options, like "Ztransp" or "Wire" or "Halo". These can not
be set for each Material-Node individually.
Also note that the Preview Render (Buttons window) now renders a bit
differently. This was a horrid piece of antique code, using a totally
incompatible way of rendering. Target is to fully re-use internal
render code for previews.
OK... that's it mostly. Now test!
2006-01-02 13:06:05 +00:00
|
|
|
if(mat) {
|
|
|
|
|
end_render_material(mat);
|
|
|
|
|
|
|
|
|
|
if(mat->nodetree && mat->use_nodes)
|
|
|
|
|
if(ri->cury>=ri->pr_recty)
|
|
|
|
|
allqueue(REDRAWNODE, 0);
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
}
|
2002-10-12 11:37:38 +00:00
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
void BIF_previewrender_buts(SpaceButs *sbuts)
|
2005-12-21 22:21:43 +00:00
|
|
|
{
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
uiBlock *block;
|
|
|
|
|
struct ID* id = 0;
|
|
|
|
|
struct ID* idfrom = 0;
|
|
|
|
|
struct ID* idshow = 0;
|
|
|
|
|
Object *ob;
|
|
|
|
|
|
|
|
|
|
if (!sbuts->ri) return;
|
|
|
|
|
|
|
|
|
|
/* we safely assume curarea has panel "preview" */
|
|
|
|
|
/* quick hack for now, later on preview should become uiBlock itself */
|
|
|
|
|
|
|
|
|
|
block= uiFindOpenPanelBlockName(&curarea->uiblocks, "Preview");
|
|
|
|
|
if(block==NULL) return;
|
|
|
|
|
|
|
|
|
|
ob= ((G.scene->basact)? (G.scene->basact)->object: 0);
|
|
|
|
|
|
|
|
|
|
/* we cant trust this global lockpoin.. for example with headerless window */
|
|
|
|
|
buttons_active_id(&id, &idfrom);
|
|
|
|
|
G.buts->lockpoin= id;
|
|
|
|
|
|
|
|
|
|
if(sbuts->mainb==CONTEXT_SHADING) {
|
|
|
|
|
int tab= sbuts->tab[CONTEXT_SHADING];
|
|
|
|
|
|
|
|
|
|
if(tab==TAB_SHADING_MAT)
|
|
|
|
|
idshow = sbuts->lockpoin;
|
|
|
|
|
else if(tab==TAB_SHADING_TEX)
|
|
|
|
|
idshow = sbuts->lockpoin;
|
|
|
|
|
else if(tab==TAB_SHADING_LAMP) {
|
|
|
|
|
if(ob && ob->type==OB_LAMP) idshow= ob->data;
|
|
|
|
|
}
|
|
|
|
|
else if(tab==TAB_SHADING_WORLD)
|
|
|
|
|
idshow = sbuts->lockpoin;
|
2005-12-21 22:21:43 +00:00
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
else if(sbuts->mainb==CONTEXT_OBJECT) {
|
|
|
|
|
if(ob && ob->type==OB_LAMP) idshow = ob->data;
|
2005-12-21 22:21:43 +00:00
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
|
|
|
|
if (idshow) {
|
|
|
|
|
BKE_icon_changed(BKE_icon_getid(idshow));
|
|
|
|
|
uiPanelPush(block);
|
|
|
|
|
set_previewrect(sbuts->area->win, PR_XMIN, PR_YMIN, PR_XMAX, PR_YMAX, sbuts->ri->pr_rectx, sbuts->ri->pr_recty); // uses UImat
|
|
|
|
|
BIF_previewrender(idshow, sbuts->ri, sbuts->area, PR_DRAW_RENDER);
|
|
|
|
|
uiPanelPop(block);
|
|
|
|
|
end_previewrect();
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
/* no active block to draw. But we do draw black if possible */
|
|
|
|
|
if(sbuts->ri->rect) {
|
|
|
|
|
memset(sbuts->ri->rect, 0, sizeof(int)*sbuts->ri->pr_rectx*sbuts->ri->pr_recty);
|
|
|
|
|
sbuts->ri->cury= sbuts->ri->pr_recty;
|
|
|
|
|
addqueue(curarea->win, REDRAW, 1);
|
|
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
return;
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
}
|
|
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
/* is panel callback, supposed to be called with correct panel offset matrix */
|
|
|
|
|
void BIF_previewdraw(void)
|
|
|
|
|
{
|
|
|
|
|
SpaceButs *sbuts= curarea->spacedata.first;
|
|
|
|
|
short id_code= 0;
|
|
|
|
|
|
|
|
|
|
if(sbuts->lockpoin) {
|
|
|
|
|
ID *id= sbuts->lockpoin;
|
|
|
|
|
id_code= GS(id->name);
|
2005-12-21 22:21:43 +00:00
|
|
|
}
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
|
|
|
|
|
if (!sbuts->ri) {
|
|
|
|
|
sbuts->ri= MEM_callocN(sizeof(RenderInfo), "butsrenderinfo");
|
|
|
|
|
sbuts->ri->cury = 0;
|
|
|
|
|
sbuts->ri->rect = NULL;
|
|
|
|
|
sbuts->ri->pr_rectx = PREVIEW_RENDERSIZE;
|
|
|
|
|
sbuts->ri->pr_recty = PREVIEW_RENDERSIZE;
|
2005-12-21 22:21:43 +00:00
|
|
|
}
|
|
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
if (sbuts->ri->rect==NULL) BIF_preview_changed(id_code);
|
|
|
|
|
else {
|
|
|
|
|
set_previewrect(sbuts->area->win, PR_XMIN, PR_YMIN, PR_XMAX, PR_YMAX, sbuts->ri->pr_rectx, sbuts->ri->pr_recty);
|
|
|
|
|
previewdraw_render(sbuts->ri, sbuts->area);
|
|
|
|
|
end_previewrect();
|
|
|
|
|
}
|
|
|
|
|
if(sbuts->ri->cury==0) BIF_preview_changed(id_code);
|
2005-12-21 22:21:43 +00:00
|
|
|
|
Christmas coding work!
********* Node editor work:
- To enable Nodes for Materials, you have to set the "Use Nodes"
button, in the new Material buttons "Nodes" Panel or in header
of the Node editor. Doing this will disable Material-Layers.
- Nodes now execute materials ("shaders"), but still only using the
previewrender code.
- Nodes have (optional) previews for rendered images.
- Node headers allow to hide buttons and/or preview image
- Nodes can be dragged larger/smaller (right-bottom corner)
- Nodes can be hidden (minimized) with hotkey H
- CTRL+click on an Input Socket gives a popup with default values.
- Changing Material/Texture or Mix node will adjust Node title.
- Click-drag outside of a Node changes cursor to "Knife' and allows to
draw a rect where to cut Links.
- Added new node types RGBtoBW, Texture, In/Output, ColorRamp
- Material Nodes have options to ouput diffuse or specular, or to use
a negative normal. The input socket 'Normal' will force the material
to use that normal, otherwise it uses the normal from the Material
that has the node tree.
- When drawing a link between two not-matching sockets, Blender inserts
a converting node (now only for value/rgb combos)
- When drawing a link to an input socket that's already in use, the
old link will either disappear or flip to another unused socket.
- A click on a Material Node will activate it, and show all its settings
in the Material Buttons. Active Material Nodes draw the material icon
in red.
- A click on any node will show its options in the Node Panel in the
Material buttons.
- Multiple Output Nodes can be used, to sample contents of a tree, but
only one Output is the real one, which is indicated in a different
color and red material icon.
- Added ThemeColors for node types
- ALT+C will convert existing Material-Layers to Node... this currently
only adds the material/mix nodes and connects them. Dunno if this is
worth a lot of coding work to make perfect?
- Press C to call another "Solve order", which will show all possible
cyclic conflicts (if there are).
- Technical: nodes now use "Type" structs which define the
structure of nodes and in/output sockets. The Type structs store all
fixed info, callbacks, and allow to reconstruct saved Nodes to match
what is required by Blender.
- Defining (new) nodes now is as simple as filling in a fixed
Type struct, plus code some callbacks. A doc will be made!
- Node preview images are by default float
********* Icon drawing:
- Cleanup of how old icons were implemented in new system, making
them 16x16 too, correctly centered *and* scaled.
- Made drawing Icons use float coordinates
- Moved BIF_calcpreview_image() into interface_icons.c, renamed it
icon_from_image(). Removed a lot of unneeded Imbuf magic here! :)
- Skipped scaling and imbuf copying when icons are OK size
********* Preview render:
- Huge cleanup of code....
- renaming BIF_xxx calls that only were used internally
- BIF_previewrender() now accepts an argument for rendering method,
so it supports icons, buttonwindow previewrender and node editor
- Only a single BIF_preview_changed() call now exists, supporting all
signals as needed for buttos and node editor
********* More stuff:
- glutil.c, glaDrawPixelsSafe() and glaDrawPixelsTex() now accept format
argument for GL_FLOAT rects
- Made the ColorBand become a built-in button for interface.c
Was a load of cleanup work in buttons_shading.c...
- removed a load of unneeded glBlendFunc() calls
- Fixed bug in calculating text length for buttons (ancient!)
2005-12-28 15:42:51 +00:00
|
|
|
}
|
2005-12-21 22:21:43 +00:00
|
|
|
|
|
|
|
|
|
