archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
5a70edc4afd2f878b1d62168a2dd86edfe66a5fb
blender-archive/source/blender/editors/space_sequencer/sequencer_intern.h

169 lines
6.0 KiB
C++
Raw Normal View History

2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
/**
Fix syntax for ID keyword.
2010-03-21 01:14:04 +00:00
* $Id$
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
*
* The Original Code is Copyright (C) 2008 Blender Foundation.
* All rights reserved.
*
*
* Added WM_operator_filesel which can be used for an operators invoke function (like WM_operator_confirm). It opens the files selector if "filename" property has not been set, else it executes the operator directly. Brecht, you might want to check, currently only sequencer add operators use it. * Added back Effects menu back, replaced SEQUENCER_OT_add_color_strip with SEQUENCER_OT_add_effect_strip. * Made sequencer header use operator UI functions. * gcc complains when char's are used as array indicies when they are not explicitly signed/unsigned, corrected previous change for vpaint to silence this error.
2009-01-26 09:13:15 +00:00
* Contributor(s): Blender Foundation, Campbell Barton
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
*
* ***** END GPL LICENSE BLOCK *****
*/
#ifndef ED_SEQUENCER_INTERN_H
#define ED_SEQUENCER_INTERN_H
* Added WM_operator_filesel which can be used for an operators invoke function (like WM_operator_confirm). It opens the files selector if "filename" property has not been set, else it executes the operator directly. Brecht, you might want to check, currently only sequencer add operators use it. * Added back Effects menu back, replaced SEQUENCER_OT_add_color_strip with SEQUENCER_OT_add_effect_strip. * Made sequencer header use operator UI functions. * gcc complains when char's are used as array indicies when they are not explicitly signed/unsigned, corrected previous change for vpaint to silence this error.
2009-01-26 09:13:15 +00:00
#include "RNA_access.h"
#include "DNA_sequence_types.h"
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
/* internal exports only */
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
struct Sequence;
struct bContext;
struct rctf;
struct SpaceSeq;
2.5 Sequencer: added Nkey + UI region, with two empty panels to fill!
2009-06-08 10:38:28 +00:00
struct ScrArea;
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
struct ARegion;
2.5 Sequencer: added Nkey + UI region, with two empty panels to fill!
2009-06-08 10:38:28 +00:00
struct ARegionType;
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
struct Scene;
2.5 Sequencer: added Nkey + UI region, with two empty panels to fill!
2009-06-08 10:38:28 +00:00
/* space_sequencer.c */
struct ARegion *sequencer_has_buttons_region(struct ScrArea *sa);
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
/* sequencer_draw.c */
Sequencer Drawing Code - Refactoring Part 1: - Started cleaning up the sequencer drawing code by firstly decoupling the different draw modes from each other (i.e. timeline view doesn't call image view). - Also separated out a few distinct few phases in sequencer-timeline drawing into different functions instead of being lumped in the single one. Recoded part of this to make it less ugly too... - Made markers get drawn again in the sequencer timeline view
2009-11-26 12:22:43 +00:00
void draw_timeline_seq(const struct bContext *C, struct ARegion *ar);
Sequencer display overlay option, this can show a border area from another time to help compare for color grading. - Okey sets the border in the display. - Okey resets the frame offset in the sequencer timeline. - ghost icon in the header can enable/disable. - frame offset can be relative or absolute (lock icon) Not very happy that this commit adds a call to BKE_animsys_evaluate_animdata(scene, ...) in do_build_seq_array_recursively() without this the offset frames dont have fcurves applied. Though we will need something like this for prefetch frames to work too.
2010-07-08 10:03:29 +00:00
void draw_image_seq(const struct bContext* C, struct Scene *scene,struct ARegion *ar, struct SpaceSeq *sseq, int cfra, int offset);
Sequencer Drawing Code - Refactoring Part 1: - Started cleaning up the sequencer drawing code by firstly decoupling the different draw modes from each other (i.e. timeline view doesn't call image view). - Also separated out a few distinct few phases in sequencer-timeline drawing into different functions instead of being lumped in the single one. Recoded part of this to make it less ugly too... - Made markers get drawn again in the sequencer timeline view
2009-11-26 12:22:43 +00:00
* added operators SEQUENCER_OT_lock, unlock, reload, refresh_all, view_all, view_selected. * sequencer transform now does overlap checks. * removed old transform functions from sequencer_edit.c * shuffle_seq moved to kernel, now moves strips to the end of the last sequence of itschannel (if all channels are used). 2.4x would remove the strip. * most of the 'Strip' menu items now call their operators in the header menu, some for view and select too.
2009-01-25 14:53:41 +00:00
void seq_reset_imageofs(struct SpaceSeq *sseq);
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
/* sequencer_edit.c */
WIP, operators SEQUENCER_OT_add_color_strip and SEQUENCER_OT_add_scene_strip but no menu to access them yet, for now can access them with R and Tkey
2009-01-20 14:19:39 +00:00
struct View2D;
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
void seq_rectf(struct Sequence *seq, struct rctf *rectf);
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
void boundbox_seq(struct Scene *scene, struct rctf *rect);
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
struct Sequence *find_nearest_seq(struct Scene *scene, struct View2D *v2d, int *hand, short mval[2]);
struct Sequence *find_neighboring_sequence(struct Scene *scene, struct Sequence *test, int lr, int sel);
void deselect_all_seq(struct Scene *scene);
void recurs_sel_seq(struct Sequence *seqm);
WIP, operators SEQUENCER_OT_add_color_strip and SEQUENCER_OT_add_scene_strip but no menu to access them yet, for now can access them with R and Tkey
2009-01-20 14:19:39 +00:00
int event_to_efftype(int event);
Enabled GCC -Wwrite-strings warning for CMake and replaced many 'char's for 'const char's,. Only one functional change where Transform orientations passed "" to BIF_createTransformOrientation() which could then have the value written into.
2010-12-03 17:05:21 +00:00
int seq_effect_find_selected(struct Scene *scene, struct Sequence *activeseq, int type, struct Sequence **selseq1, struct Sequence **selseq2, struct Sequence **selseq3, const char **error_str);
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
Fix [#22256] bpy.ops.sequencer.delete.poll() not working Just about all sequencer operator poll functions were requiring an active sequence editor space type. This wasn't necessary for most of them, and prevented use from scripts, console, etc.
2010-05-06 07:19:55 +00:00
/* operator helpers */
int sequencer_edit_poll(struct bContext *C);
Sequencer display overlay option, this can show a border area from another time to help compare for color grading. - Okey sets the border in the display. - Okey resets the frame offset in the sequencer timeline. - ghost icon in the header can enable/disable. - frame offset can be relative or absolute (lock icon) Not very happy that this commit adds a call to BKE_animsys_evaluate_animdata(scene, ...) in do_build_seq_array_recursively() without this the offset frames dont have fcurves applied. Though we will need something like this for prefetch frames to work too.
2010-07-08 10:03:29 +00:00
int sequencer_view_poll(struct bContext *C);
Fix [#22256] bpy.ops.sequencer.delete.poll() not working Just about all sequencer operator poll functions were requiring an active sequence editor space type. This wasn't necessary for most of them, and prevented use from scripts, console, etc.
2010-05-06 07:19:55 +00:00
* Added WM_operator_filesel which can be used for an operators invoke function (like WM_operator_confirm). It opens the files selector if "filename" property has not been set, else it executes the operator directly. Brecht, you might want to check, currently only sequencer add operators use it. * Added back Effects menu back, replaced SEQUENCER_OT_add_color_strip with SEQUENCER_OT_add_effect_strip. * Made sequencer header use operator UI functions. * gcc complains when char's are used as array indicies when they are not explicitly signed/unsigned, corrected previous change for vpaint to silence this error.
2009-01-26 09:13:15 +00:00
/* externs */
extern EnumPropertyItem sequencer_prop_effect_types[];
- sequencer select handle menu functions back - sequencer border zoom (Shift+B) or from the header. - added includes for blender.c and outliner.c - editfont.c got rid of warning
2009-01-31 09:58:38 +00:00
extern EnumPropertyItem prop_side_types[];
* Added WM_operator_filesel which can be used for an operators invoke function (like WM_operator_confirm). It opens the files selector if "filename" property has not been set, else it executes the operator directly. Brecht, you might want to check, currently only sequencer add operators use it. * Added back Effects menu back, replaced SEQUENCER_OT_add_color_strip with SEQUENCER_OT_add_effect_strip. * Made sequencer header use operator UI functions. * gcc complains when char's are used as array indicies when they are not explicitly signed/unsigned, corrected previous change for vpaint to silence this error.
2009-01-26 09:13:15 +00:00
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
/* operators */
struct wmOperatorType;
Key Configuration Keymaps are now saveable and configurable from the user preferences, note that editing one item in a keymap means the whole keymap is now defined by the user and will not be updated by Blender, an option for syncing might be added later. The outliner interface is still there, but I will probably remove it. There's actually 3 levels now: * Default builtin key configuration. * Key configuration loaded from .py file, for configs like Blender 2.4x or other 3D applications. * Keymaps edited by the user and saved in .B.blend. These can be saved to .py files as well to make creating distributable configurations easier. Also, user preferences sections were reorganized a bit, now there is: Interface, Editing, Input, Files and System. Implementation notes: * wmKeyConfig was added which represents a key configuration containing keymaps. * wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap. * Modal maps are not wrapped yet. * User preferences DNA file reading did not support newdataadr() yet, added this now for reading keymaps. * Key configuration related settings are now RNA wrapped. * is_property_set and is_property_hidden python methods were added.
2009-10-08 18:40:03 +00:00
struct wmKeyConfig;
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
void SEQUENCER_OT_cut(struct wmOperatorType *ot);
void SEQUENCER_OT_mute(struct wmOperatorType *ot);
void SEQUENCER_OT_unmute(struct wmOperatorType *ot);
* added operators SEQUENCER_OT_lock, unlock, reload, refresh_all, view_all, view_selected. * sequencer transform now does overlap checks. * removed old transform functions from sequencer_edit.c * shuffle_seq moved to kernel, now moves strips to the end of the last sequence of itschannel (if all channels are used). 2.4x would remove the strip. * most of the 'Strip' menu items now call their operators in the header menu, some for view and select too.
2009-01-25 14:53:41 +00:00
void SEQUENCER_OT_lock(struct wmOperatorType *ot);
void SEQUENCER_OT_unlock(struct wmOperatorType *ot);
void SEQUENCER_OT_reload(struct wmOperatorType *ot);
void SEQUENCER_OT_refresh_all(struct wmOperatorType *ot);
sequencer re-assign inputs back
2010-07-03 22:25:22 +00:00
void SEQUENCER_OT_reassign_inputs(struct wmOperatorType *ot);
Fix for [#24374] VSE: Reassign Inputs ignores selection order. * No way currently to know the order of effect inputs, so I added a swap operator for the inputs. * Also added the effect inputs to the strip property panel (weren't even in rna before). These are not yet editable, but can be very helpful in determining what the inputs are if the strip is too short to see the name in the timeline.
2010-10-30 12:04:00 +00:00
void SEQUENCER_OT_swap_inputs(struct wmOperatorType *ot);
2.5: * Rename OT_duplicate_add, to OT_duplicate. Also fixes warning print since I forgot to do this in the toolbar for MESH.
2009-07-08 21:41:35 +00:00
void SEQUENCER_OT_duplicate(struct wmOperatorType *ot);
sequencer operators duplicate, delete, separate images.
2009-01-21 18:47:09 +00:00
void SEQUENCER_OT_delete(struct wmOperatorType *ot);
sequencer op names change
2009-04-12 20:32:42 +00:00
void SEQUENCER_OT_images_separate(struct wmOperatorType *ot);
* operators for toggling, making, separating metastrip's. (tab, m, alt+m) * transform support for metastrips * active strip is set to NULL if its freed again.
2009-01-23 23:14:02 +00:00
void SEQUENCER_OT_meta_toggle(struct wmOperatorType *ot);
void SEQUENCER_OT_meta_make(struct wmOperatorType *ot);
void SEQUENCER_OT_meta_separate(struct wmOperatorType *ot);
patch from Xavier Thomas, add back the sequencer snap operator
2009-06-09 21:29:59 +00:00
void SEQUENCER_OT_snap(struct wmOperatorType *ot);
2.5 Sequencer New Operator for 'Move current frame to next/previous edit point' Keymap: PageUp/PageDown (small Durian wish)
2009-10-28 19:53:25 +00:00
void SEQUENCER_OT_previous_edit(struct wmOperatorType *ot);
void SEQUENCER_OT_next_edit(struct wmOperatorType *ot);
* made seqence swap into 1 operator with left/right enum option * allow sequence swapping even when the strip has an effect * only recalc the effect when its needed
2009-12-15 10:04:54 +00:00
void SEQUENCER_OT_swap(struct wmOperatorType *ot);
sequencer swap data operator. needed for durian so we can swap out preview AVI's for EXR sequences.
2010-06-21 17:37:50 +00:00
void SEQUENCER_OT_swap_data(struct wmOperatorType *ot);
Sequencer: (small Durian wish) * new operator: set rendersize (SEQUENCE_OT_rendersize) sets the render output size in the current scene to the size of the active sequence strip * works for movies and images right now * TODO: currently only works if image or movie strip has been loaded (as in showing the preview for example) - reason is that otherwise the size is not initialized in the strip
2009-11-08 15:03:10 +00:00
void SEQUENCER_OT_rendersize(struct wmOperatorType *ot);
sequencer operators duplicate, delete, separate images.
2009-01-21 18:47:09 +00:00
Sequencer drawing cleanup (Part 1) Separated preview drawing into own ARegion, this should make using View2D possible The Sequencer now has three view types: Sequencer, Preview and split Sequencer/Preview. Changing the preview can be done either by the combobox in the header or toggling through those types with CTRL+TAB. Notes: * Icon for split Sequencer/Preview view missing still. * Naming items in the comboboxes can be improved (just Preview instead of Image Preview?) Next steps: * bringing back View2D handling (zoom/pan) for image preview * experimenting with splitting the Preview ARegion for In/Out editing
2009-12-14 21:42:25 +00:00
void SEQUENCER_OT_view_toggle(struct wmOperatorType *ot);
* added operators SEQUENCER_OT_lock, unlock, reload, refresh_all, view_all, view_selected. * sequencer transform now does overlap checks. * removed old transform functions from sequencer_edit.c * shuffle_seq moved to kernel, now moves strips to the end of the last sequence of itschannel (if all channels are used). 2.4x would remove the strip. * most of the 'Strip' menu items now call their operators in the header menu, some for view and select too.
2009-01-25 14:53:41 +00:00
void SEQUENCER_OT_view_all(struct wmOperatorType *ot);
void SEQUENCER_OT_view_selected(struct wmOperatorType *ot);
sequencer numpad keys for zoom levels
2010-06-17 14:22:54 +00:00
void SEQUENCER_OT_view_zoom_ratio(struct wmOperatorType *ot);
Sequencer display overlay option, this can show a border area from another time to help compare for color grading. - Okey sets the border in the display. - Okey resets the frame offset in the sequencer timeline. - ghost icon in the header can enable/disable. - frame offset can be relative or absolute (lock icon) Not very happy that this commit adds a call to BKE_animsys_evaluate_animdata(scene, ...) in do_build_seq_array_recursively() without this the offset frames dont have fcurves applied. Though we will need something like this for prefetch frames to work too.
2010-07-08 10:03:29 +00:00
void SEQUENCER_OT_view_ghost_border(struct wmOperatorType *ot);
WIP, operators SEQUENCER_OT_add_color_strip and SEQUENCER_OT_add_scene_strip but no menu to access them yet, for now can access them with R and Tkey
2009-01-20 14:19:39 +00:00
sequencer clipboard note: for inter-scene copying this uses a hack because Colin needs it because half his scene was scrambled by blender.
2009-12-17 14:45:47 +00:00
void SEQUENCER_OT_copy(struct wmOperatorType *ot);
void SEQUENCER_OT_paste(struct wmOperatorType *ot);
Sequencer drawing cleanup (Part 1) Separated preview drawing into own ARegion, this should make using View2D possible The Sequencer now has three view types: Sequencer, Preview and split Sequencer/Preview. Changing the preview can be done either by the combobox in the header or toggling through those types with CTRL+TAB. Notes: * Icon for split Sequencer/Preview view missing still. * Naming items in the comboboxes can be improved (just Preview instead of Image Preview?) Next steps: * bringing back View2D handling (zoom/pan) for image preview * experimenting with splitting the Preview ARegion for In/Out editing
2009-12-14 21:42:25 +00:00
/* preview specific operators */
void SEQUENCER_OT_view_all_preview(struct wmOperatorType *ot);
WIP, operators SEQUENCER_OT_add_color_strip and SEQUENCER_OT_add_scene_strip but no menu to access them yet, for now can access them with R and Tkey
2009-01-20 14:19:39 +00:00
/* sequencer_select.c */
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void SEQUENCER_OT_select_all_toggle(struct wmOperatorType *ot);
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
void SEQUENCER_OT_select(struct wmOperatorType *ot);
void SEQUENCER_OT_select_more(struct wmOperatorType *ot);
void SEQUENCER_OT_select_less(struct wmOperatorType *ot);
void SEQUENCER_OT_select_linked(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void SEQUENCER_OT_select_linked_pick(struct wmOperatorType *ot);
- sequencer select handle menu functions back - sequencer border zoom (Shift+B) or from the header. - added includes for blender.c and outliner.c - editfont.c got rid of warning
2009-01-31 09:58:38 +00:00
void SEQUENCER_OT_select_handles(struct wmOperatorType *ot);
select left/right of active sequence strip
2009-02-13 14:16:56 +00:00
void SEQUENCER_OT_select_active_side(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void SEQUENCER_OT_select_border(struct wmOperatorType *ot);
2.5: Mesh and Various Fixes * 3D view Mesh menu works again, but incomplete. * Add Properties and Toolbar to 3D View menu. * Added "specials" menus back, vertex/edge/face and general. * Various fixes in existing mesh operators, some were not working. * Add MESH_OT_merge. * Merge all subdivide ops into MESH_OT_subdivide, subdivide code changes to make smooth + multi give good results. * Rename all select inverse ops to *_OT_select_inverse. * Fix "search for unknown operator" prints at startup, and some warnings in py code. * Don't run .pyc files on startup. * Remove unused image window header C code.
2009-07-08 21:31:28 +00:00
void SEQUENCER_OT_select_inverse(struct wmOperatorType *ot);
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
WIP, operators SEQUENCER_OT_add_color_strip and SEQUENCER_OT_add_scene_strip but no menu to access them yet, for now can access them with R and Tkey
2009-01-20 14:19:39 +00:00
/* sequencer_select.c */
sequencer op names change
2009-04-12 20:32:42 +00:00
void SEQUENCER_OT_scene_strip_add(struct wmOperatorType *ot);
void SEQUENCER_OT_movie_strip_add(struct wmOperatorType *ot);
void SEQUENCER_OT_sound_strip_add(struct wmOperatorType *ot);
void SEQUENCER_OT_image_strip_add(struct wmOperatorType *ot);
void SEQUENCER_OT_effect_strip_add(struct wmOperatorType *ot);
WIP, operators SEQUENCER_OT_add_color_strip and SEQUENCER_OT_add_scene_strip but no menu to access them yet, for now can access them with R and Tkey
2009-01-20 14:19:39 +00:00
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
/* RNA enums, just to be more readable */
enum {
added back sequencer RMB select Ctrl/Alt modifier keys.
2009-02-15 17:24:09 +00:00
SEQ_SIDE_NONE=0,
spaces -> tabs, (4 spaces == 1 tab, only for white space preceding text)
2010-03-22 09:30:00 +00:00
SEQ_SIDE_LEFT,
SEQ_SIDE_RIGHT,
- sequencer select handle menu functions back - sequencer border zoom (Shift+B) or from the header. - added includes for blender.c and outliner.c - editfont.c got rid of warning
2009-01-31 09:58:38 +00:00
SEQ_SIDE_BOTH,
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
};
enum {
spaces -> tabs, (4 spaces == 1 tab, only for white space preceding text)
2010-03-22 09:30:00 +00:00
SEQ_CUT_SOFT,
SEQ_CUT_HARD,
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
};
enum {
spaces -> tabs, (4 spaces == 1 tab, only for white space preceding text)
2010-03-22 09:30:00 +00:00
SEQ_SELECTED,
SEQ_UNSELECTED,
Added back some functionality to the sequencer - removed static vars _last_seq, last_imagename and last_sounddir, replacing them with with vars in the "Editing" struct. didnt manage to get the active sequence to load so currently thats lost when loading. - removed flag SEQ_ACTIVE - Added operators cut, mute, unmute, deselect_all, select_invert, select, select_more, select_less, select_pick_linked, select_linked and borderselect.
2009-01-19 21:42:18 +00:00
};
/* defines used internally */
#define SCE_MARKERS 0 // XXX - dummy
/* sequencer_ops.c */
void sequencer_operatortypes(void);
Key Configuration Keymaps are now saveable and configurable from the user preferences, note that editing one item in a keymap means the whole keymap is now defined by the user and will not be updated by Blender, an option for syncing might be added later. The outliner interface is still there, but I will probably remove it. There's actually 3 levels now: * Default builtin key configuration. * Key configuration loaded from .py file, for configs like Blender 2.4x or other 3D applications. * Keymaps edited by the user and saved in .B.blend. These can be saved to .py files as well to make creating distributable configurations easier. Also, user preferences sections were reorganized a bit, now there is: Interface, Editing, Input, Files and System. Implementation notes: * wmKeyConfig was added which represents a key configuration containing keymaps. * wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap. * Modal maps are not wrapped yet. * User preferences DNA file reading did not support newdataadr() yet, added this now for reading keymaps. * Key configuration related settings are now RNA wrapped. * is_property_set and is_property_hidden python methods were added.
2009-10-08 18:40:03 +00:00
void sequencer_keymap(struct wmKeyConfig *keyconf);
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
2.5 12k lines of sequencer back! Only seqaudio.c skipped for now. Notes: - it only draws now, nothing refreshes or edits. - fixed bug in view2d.c with vertical grid step being 0.0f - render code and fileselect code is #ifdeffed out - sequence evaluation code moved to blenkernel, so it can be used for render without bad level calls General note; sequencer code is very untidy, mixing styles too much. Tried to clean it some, but it would be nice if formatting is kept consistant from now on.
2009-01-12 19:02:08 +00:00
/* sequencer_scope.c */
struct ImBuf *make_waveform_view_from_ibuf(struct ImBuf * ibuf);
struct ImBuf *make_sep_waveform_view_from_ibuf(struct ImBuf * ibuf);
struct ImBuf *make_vectorscope_view_from_ibuf(struct ImBuf * ibuf);
struct ImBuf *make_zebra_view_from_ibuf(struct ImBuf * ibuf, float perc);
struct ImBuf *make_histogram_view_from_ibuf(struct ImBuf * ibuf);
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
2.5 Sequencer: added Nkey + UI region, with two empty panels to fill!
2009-06-08 10:38:28 +00:00
/* sequencer_buttons.c */
void SEQUENCER_OT_properties(struct wmOperatorType *ot);
void sequencer_buttons_register(struct ARegionType *art);
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
#endif /* ED_SEQUENCER_INTERN_H */
Copy Permalink