This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
blender-archive/source/blender/gpu/GPU_framebuffer.h

244 lines
8.2 KiB
C++
Raw Normal View History

/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* The Original Code is Copyright (C) 2005 Blender Foundation.
* All rights reserved.
*/
/** \file
* \ingroup gpu
*
* GPU Framebuffer
* - this is a wrapper for an OpenGL framebuffer object (FBO). in practice
* multiple FBO's may be created.
* - actual FBO creation & config is deferred until GPU_framebuffer_bind or
* GPU_framebuffer_check_valid to allow creation & config while another
* opengl context is bound (since FBOs are not shared between ogl contexts).
*/
#pragma once
#include "GPU_texture.h"
#ifdef __cplusplus
extern "C" {
#endif
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
typedef struct GPUAttachment {
struct GPUTexture *tex;
2020-07-25 18:40:19 +02:00
int layer, mip;
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
} GPUAttachment;
typedef enum eGPUFrameBufferBits {
GPU_COLOR_BIT = (1 << 0),
GPU_DEPTH_BIT = (1 << 1),
GPU_STENCIL_BIT = (1 << 2),
} eGPUFrameBufferBits;
typedef enum eGPUBackBuffer {
GPU_BACKBUFFER_LEFT = 0,
GPU_BACKBUFFER_RIGHT,
} eGPUBackBuffer;
/** Opaque pointer hiding blender::gpu::FrameBuffer. */
typedef struct GPUFrameBuffer {
void *dummy;
} GPUFrameBuffer;
typedef struct GPUOffScreen GPUOffScreen;
GPUFrameBuffer *GPU_framebuffer_create(const char *name);
void GPU_framebuffer_free(GPUFrameBuffer *fb);
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
void GPU_framebuffer_bind(GPUFrameBuffer *fb);
void GPU_framebuffer_bind_no_srgb(GPUFrameBuffer *fb);
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
void GPU_framebuffer_restore(void);
bool GPU_framebuffer_bound(GPUFrameBuffer *fb);
bool GPU_framebuffer_check_valid(GPUFrameBuffer *fb, char err_out[256]);
GPUFrameBuffer *GPU_framebuffer_active_get(void);
GPUFrameBuffer *GPU_framebuffer_back_get(void);
#define GPU_FRAMEBUFFER_FREE_SAFE(fb) \
do { \
if (fb != NULL) { \
GPU_framebuffer_free(fb); \
fb = NULL; \
} \
} while (0)
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
/* Framebuffer setup : You need to call GPU_framebuffer_bind for these
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
* to be effective. */
void GPU_framebuffer_texture_attach_ex(GPUFrameBuffer *gpu_fb,
GPUAttachment attachement,
int slot);
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
void GPU_framebuffer_texture_detach(GPUFrameBuffer *fb, struct GPUTexture *tex);
/**
2019-03-19 15:17:46 +11:00
* How to use #GPU_framebuffer_ensure_config().
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
*
2019-03-19 15:17:46 +11:00
* Example:
* \code{.c}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
* GPU_framebuffer_ensure_config(&fb, {
* GPU_ATTACHMENT_TEXTURE(depth), // must be depth buffer
* GPU_ATTACHMENT_TEXTURE(tex1),
* GPU_ATTACHMENT_TEXTURE_CUBEFACE(tex2, 0),
* GPU_ATTACHMENT_TEXTURE_LAYER_MIP(tex2, 0, 0)
* })
2019-03-19 15:17:46 +11:00
* \encode
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
*
2019-04-10 08:40:49 +02:00
* \note Unspecified attachments (i.e: those beyond the last
2019-03-19 15:17:46 +11:00
* GPU_ATTACHMENT_* in GPU_framebuffer_ensure_config list) are left unchanged.
*
* \note Make sure that the dimensions of your textures matches
* otherwise you will have an invalid framebuffer error.
*/
#define GPU_framebuffer_ensure_config(_fb, ...) \
do { \
if (*(_fb) == NULL) { \
*(_fb) = GPU_framebuffer_create(#_fb); \
} \
GPUAttachment config[] = __VA_ARGS__; \
GPU_framebuffer_config_array(*(_fb), config, (sizeof(config) / sizeof(GPUAttachment))); \
} while (0)
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
2018-07-08 13:14:49 +02:00
void GPU_framebuffer_config_array(GPUFrameBuffer *fb, const GPUAttachment *config, int config_len);
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_NONE \
{ \
NULL, -1, 0, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_LEAVE \
{ \
NULL, -1, -1, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_TEXTURE(_tex) \
{ \
_tex, -1, 0, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_TEXTURE_MIP(_tex, _mip) \
{ \
_tex, -1, _mip, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_TEXTURE_LAYER(_tex, _layer) \
{ \
_tex, _layer, 0, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_TEXTURE_LAYER_MIP(_tex, _layer, _mip) \
{ \
_tex, _layer, _mip, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_TEXTURE_CUBEFACE(_tex, _face) \
{ \
_tex, _face, 0, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
#define GPU_ATTACHMENT_TEXTURE_CUBEFACE_MIP(_tex, _face, _mip) \
{ \
_tex, _face, _mip, \
}
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
void GPU_framebuffer_texture_attach(GPUFrameBuffer *fb, GPUTexture *tex, int slot, int mip);
void GPU_framebuffer_texture_layer_attach(
GPUFrameBuffer *fb, GPUTexture *tex, int slot, int layer, int mip);
void GPU_framebuffer_texture_cubeface_attach(
GPUFrameBuffer *fb, GPUTexture *tex, int slot, int face, int mip);
/* Framebuffer operations */
void GPU_framebuffer_viewport_set(GPUFrameBuffer *fb, int x, int y, int w, int h);
void GPU_framebuffer_viewport_get(GPUFrameBuffer *fb, int r_viewport[4]);
void GPU_framebuffer_viewport_reset(GPUFrameBuffer *fb);
void GPU_framebuffer_clear(GPUFrameBuffer *fb,
eGPUFrameBufferBits buffers,
const float clear_col[4],
float clear_depth,
unsigned int clear_stencil);
#define GPU_framebuffer_clear_color(fb, col) \
GPU_framebuffer_clear(fb, GPU_COLOR_BIT, col, 0.0f, 0x00)
#define GPU_framebuffer_clear_depth(fb, depth) \
GPU_framebuffer_clear(fb, GPU_DEPTH_BIT, NULL, depth, 0x00)
#define GPU_framebuffer_clear_color_depth(fb, col, depth) \
GPU_framebuffer_clear(fb, GPU_COLOR_BIT | GPU_DEPTH_BIT, col, depth, 0x00)
#define GPU_framebuffer_clear_stencil(fb, stencil) \
GPU_framebuffer_clear(fb, GPU_STENCIL_BIT, NULL, 0.0f, stencil)
#define GPU_framebuffer_clear_depth_stencil(fb, depth, stencil) \
GPU_framebuffer_clear(fb, GPU_DEPTH_BIT | GPU_STENCIL_BIT, NULL, depth, stencil)
#define GPU_framebuffer_clear_color_depth_stencil(fb, col, depth, stencil) \
GPU_framebuffer_clear(fb, GPU_COLOR_BIT | GPU_DEPTH_BIT | GPU_STENCIL_BIT, col, depth, stencil)
void GPU_framebuffer_multi_clear(GPUFrameBuffer *fb, const float (*clear_cols)[4]);
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
void GPU_framebuffer_read_depth(GPUFrameBuffer *fb, int x, int y, int w, int h, float *data);
void GPU_framebuffer_read_color(GPUFrameBuffer *fb,
int x,
int y,
int w,
int h,
int channels,
int slot,
eGPUDataFormat format,
void *data);
void GPU_framebuffer_blit(GPUFrameBuffer *fb_read,
int read_slot,
GPUFrameBuffer *fb_write,
int write_slot,
eGPUFrameBufferBits blit_buffers);
void GPU_framebuffer_recursive_downsample(GPUFrameBuffer *fb,
int max_lvl,
void (*callback)(void *userData, int level),
void *userData);
/* GPU OffScreen
2020-09-02 09:58:26 +10:00
* - wrapper around frame-buffer and texture for simple off-screen drawing
GPUFramebuffer: Refactor (Part 2) This refactor modernise the use of framebuffers. It also touches a lot of files so breaking down changes we have: - GPUTexture: Allow textures to be attached to more than one GPUFrameBuffer. This allows to create and configure more FBO without the need to attach and detach texture at drawing time. - GPUFrameBuffer: The wrapper starts to mimic opengl a bit closer. This allows to configure the framebuffer inside a context other than the one that will be rendering the framebuffer. We do the actual configuration when binding the FBO. We also Keep track of config validity and save drawbuffers state in the FBO. We remove the different bind/unbind functions. These make little sense now that we have separate contexts. - DRWFrameBuffer: We replace DRW_framebuffer functions by GPU_framebuffer ones to avoid another layer of abstraction. We move the DRW convenience functions to GPUFramebuffer instead and even add new ones. The MACRO GPU_framebuffer_ensure_config is pretty much all you need to create and config a GPUFramebuffer. - DRWTexture: Due to the removal of DRWFrameBuffer, we needed to create functions to create textures for thoses framebuffers. Pool textures are now using default texture parameters for the texture type asked. - DRWManager: Make sure no framebuffer object is bound when doing cache filling. - GPUViewport: Add new color_only_fb and depth_only_fb along with FB API usage update. This let draw engines render to color/depth only target and without the need to attach/detach textures. - WM_window: Assert when a framebuffer is bound when changing context. This balance the fact we are not track ogl context inside GPUFramebuffer. - Eevee, Clay, Mode engines: Update to new API. This comes with a lot of code simplification. This also come with some cleanups in some engine codes.
2018-03-25 17:46:48 +02:00
*/
2018-07-18 23:09:31 +10:00
GPUOffScreen *GPU_offscreen_create(
int width, int height, bool depth, bool high_bitdepth, char err_out[256]);
void GPU_offscreen_free(GPUOffScreen *ofs);
void GPU_offscreen_bind(GPUOffScreen *ofs, bool save);
void GPU_offscreen_unbind(GPUOffScreen *ofs, bool restore);
void GPU_offscreen_read_pixels(GPUOffScreen *ofs, eGPUDataFormat type, void *pixels);
void GPU_offscreen_draw_to_screen(GPUOffScreen *ofs, int x, int y);
int GPU_offscreen_width(const GPUOffScreen *ofs);
int GPU_offscreen_height(const GPUOffScreen *ofs);
struct GPUTexture *GPU_offscreen_color_texture(const GPUOffScreen *ofs);
void GPU_offscreen_viewport_data_get(GPUOffScreen *ofs,
GPUFrameBuffer **r_fb,
struct GPUTexture **r_color,
struct GPUTexture **r_depth);
void GPU_clear_color(float red, float green, float blue, float alpha);
void GPU_clear_depth(float depth);
void GPU_frontbuffer_read_pixels(
int x, int y, int w, int h, int channels, eGPUDataFormat format, void *data);
void GPU_backbuffer_bind(eGPUBackBuffer buffer);
#ifdef __cplusplus
}
#endif