archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
8856b598fdb411bac0dd65053a1d91093c8cac3b
blender-archive/source/blender/blenlib/BLI_voxel.h

42 lines
1.5 KiB
C++
Raw Normal View History

Voxel data & volume light cache * Added support for additional file types in the voxel data texture. I added support for 8 bit raw files, but most notably for image sequences. Image sequences generate the voxel grid by stacking layers of image slices on top of each other to generate the voxels in the Z axis - the number of slices in the sequence is the resolution of the voxel grid's Z axis. i.e. http://mke3.net/blender/devel/rendering/volumetrics/skull_layers.jpg The image sequence option is particularly useful for loading medical data into Blender. 3d medical data such as MRIs or CT scans are often stored as DICOM format image sequences. It's not in Blender's scope to support the DICOM format, but there are plenty of utilities such as ImageMagick, Photoshop or OsiriX that can easily convert DICOM files to formats that Blender supports, such as PNG or JPEG. Here are some example renderings using these file formats to load medical data: http://vimeo.com/5242961 http://vimeo.com/5242989 http://vimeo.com/5243228 Currently the 8 bit raw and image sequence formats only support the 'still' rendering feature. * Changed the default texture placement to be centred around 0.5,0.5,0.5, rather than within the 0.0,1.0 cube. This is more consistent with image textures, and it also means you can easily add a voxel data texture to a default cube without having to mess around with mapping. * Added some more extrapolation modes such as Repeat and Extend rather than just clipping http://mke3.net/blender/devel/rendering/volumetrics/bradybunch.jpg * Changed the voxel data storage to use MEM_Mapalloc (memory mapped disk cache) rather than storing in ram, to help cut down memory usage. * Refactored and cleaned up the code a lot. Now the access and interpolation code is separated into a separate voxel library inside blenlib. This is now properly shared between voxel data texture and light cache (previously there was some duplicated code). * Made volume light cache support non-cubic voxel grids. Now the resolution specified in the material properties is used for the longest edge of the volume object's bounding box, and the shorter edges are proportional (similar to how resolution is calculated for fluid sim domains). This is *much* more memory efficient for squashed volume regions like clouds layer bounding boxes, allowing you to raise the resolution considerably while still keeping memory usage acceptable.
2009-06-20 06:41:50 +00:00
/**
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Voxel data & volume light cache * Added support for additional file types in the voxel data texture. I added support for 8 bit raw files, but most notably for image sequences. Image sequences generate the voxel grid by stacking layers of image slices on top of each other to generate the voxels in the Z axis - the number of slices in the sequence is the resolution of the voxel grid's Z axis. i.e. http://mke3.net/blender/devel/rendering/volumetrics/skull_layers.jpg The image sequence option is particularly useful for loading medical data into Blender. 3d medical data such as MRIs or CT scans are often stored as DICOM format image sequences. It's not in Blender's scope to support the DICOM format, but there are plenty of utilities such as ImageMagick, Photoshop or OsiriX that can easily convert DICOM files to formats that Blender supports, such as PNG or JPEG. Here are some example renderings using these file formats to load medical data: http://vimeo.com/5242961 http://vimeo.com/5242989 http://vimeo.com/5243228 Currently the 8 bit raw and image sequence formats only support the 'still' rendering feature. * Changed the default texture placement to be centred around 0.5,0.5,0.5, rather than within the 0.0,1.0 cube. This is more consistent with image textures, and it also means you can easily add a voxel data texture to a default cube without having to mess around with mapping. * Added some more extrapolation modes such as Repeat and Extend rather than just clipping http://mke3.net/blender/devel/rendering/volumetrics/bradybunch.jpg * Changed the voxel data storage to use MEM_Mapalloc (memory mapped disk cache) rather than storing in ram, to help cut down memory usage. * Refactored and cleaned up the code a lot. Now the access and interpolation code is separated into a separate voxel library inside blenlib. This is now properly shared between voxel data texture and light cache (previously there was some duplicated code). * Made volume light cache support non-cubic voxel grids. Now the resolution specified in the material properties is used for the longest edge of the volume object's bounding box, and the shorter edges are proportional (similar to how resolution is calculated for fluid sim domains). This is *much* more memory efficient for squashed volume regions like clouds layer bounding boxes, allowing you to raise the resolution considerably while still keeping memory usage acceptable.
2009-06-20 06:41:50 +00:00
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): Matt Ebb, Raul Fernandez Hernandez (Farsthary).
*
* ***** END GPL LICENSE BLOCK *****
*/
#ifndef BLI_VOXEL_H
#define BLI_VOXEL_H
/* find the index number of a voxel, given x/y/z integer coords and resolution vector */
#define V_I(x, y, z, res) ( (z)*(res)[1]*(res)[0] + (y)*(res)[0] + (x) )
/* all input coordinates must be in bounding box 0.0 - 1.0 */
float voxel_sample_nearest(float *data, int *res, float *co);
float voxel_sample_trilinear(float *data, int *res, float *co);
* New and improved voxel interpolation methods, from Alfredo. Now there is (in order of speed): * Nearest neighbour (very rough quality) * Linear (medium quality) * Quadratic (good quality) * Cubic Catmull-rom (very good quality, crisp) * Cubic B-spline (very good quality, smooth) Thanks!
2009-09-04 06:55:01 +00:00
float voxel_sample_triquadratic(float *data, int *res, float *co);
float voxel_sample_tricubic(float *data, int *res, float *co, int bspline);
Voxel data & volume light cache * Added support for additional file types in the voxel data texture. I added support for 8 bit raw files, but most notably for image sequences. Image sequences generate the voxel grid by stacking layers of image slices on top of each other to generate the voxels in the Z axis - the number of slices in the sequence is the resolution of the voxel grid's Z axis. i.e. http://mke3.net/blender/devel/rendering/volumetrics/skull_layers.jpg The image sequence option is particularly useful for loading medical data into Blender. 3d medical data such as MRIs or CT scans are often stored as DICOM format image sequences. It's not in Blender's scope to support the DICOM format, but there are plenty of utilities such as ImageMagick, Photoshop or OsiriX that can easily convert DICOM files to formats that Blender supports, such as PNG or JPEG. Here are some example renderings using these file formats to load medical data: http://vimeo.com/5242961 http://vimeo.com/5242989 http://vimeo.com/5243228 Currently the 8 bit raw and image sequence formats only support the 'still' rendering feature. * Changed the default texture placement to be centred around 0.5,0.5,0.5, rather than within the 0.0,1.0 cube. This is more consistent with image textures, and it also means you can easily add a voxel data texture to a default cube without having to mess around with mapping. * Added some more extrapolation modes such as Repeat and Extend rather than just clipping http://mke3.net/blender/devel/rendering/volumetrics/bradybunch.jpg * Changed the voxel data storage to use MEM_Mapalloc (memory mapped disk cache) rather than storing in ram, to help cut down memory usage. * Refactored and cleaned up the code a lot. Now the access and interpolation code is separated into a separate voxel library inside blenlib. This is now properly shared between voxel data texture and light cache (previously there was some duplicated code). * Made volume light cache support non-cubic voxel grids. Now the resolution specified in the material properties is used for the longest edge of the volume object's bounding box, and the shorter edges are proportional (similar to how resolution is calculated for fluid sim domains). This is *much* more memory efficient for squashed volume regions like clouds layer bounding boxes, allowing you to raise the resolution considerably while still keeping memory usage acceptable.
2009-06-20 06:41:50 +00:00
2.5 - Warning cleanups (for mingw+scons) Also, made the Outliner's horizontal scrollbar work better for keymaps view. It's still using an approximation of the width, but at least you can scroll now.
2009-08-26 00:38:43 +00:00
#endif /* BLI_VOXEL_H */
Copy Permalink