archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
9d4ea8427770e8ca68149fc7f7760fe2273e5ce3
blender-archive/source/blender/editors/gpencil/gpencil_intern.h

277 lines
9.3 KiB
C++
Raw Normal View History

doxygen: prevent GPL license block from being parsed as doxygen comment.
2011-02-23 10:52:22 +00:00
/*
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
*
* The Original Code is Copyright (C) 2009 Blender Foundation.
* All rights reserved.
*
*
* Contributor(s): Blender Foundation
*
* ***** END GPL LICENSE BLOCK *****
*/
doxygen: blender/editors tagged.
2011-02-27 20:29:51 +00:00
/** \file blender/editors/gpencil/gpencil_intern.h
* \ingroup edgpencil
*/
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#ifndef __GPENCIL_INTERN_H__
#define __GPENCIL_INTERN_H__
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
2.5 - Grease Pencil Version 2 (Crude rebirth) This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks. However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
2009-08-26 12:01:15 +00:00
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
#include "DNA_vec_types.h"
2.5 - Grease Pencil Version 2 (Crude rebirth) This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks. However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
2009-08-26 12:01:15 +00:00
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
/* internal exports only */
Grease pencil: non-blocking sketch sessions - Implement own undo stack for grease pencil, so now there'll be no keymaps conflicts. - Supported redo's during sketch session. - Get rid of flag stored in Globals -- use undo stack to check if grease pencil session is active.
2011-09-06 07:59:18 +00:00
struct bGPdata;
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
struct bGPDstroke;
struct bGPDspoint;
struct ARegion;
struct View2D;
2.5 - Grease Pencil Version 2 (Crude rebirth) This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks. However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
2009-08-26 12:01:15 +00:00
struct wmOperatorType;
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
struct PointerRNA;
struct PropertyRNA;
struct EnumPropertyItem;
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
/* ***************************************************** */
/* Internal API */
/* Stroke Coordinates API ------------------------------ */
/* gpencil_utils.c */
typedef struct GP_SpaceConversion {
struct bGPdata *gpd;
struct bGPDlayer *gpl;
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
struct ScrArea *sa;
struct ARegion *ar;
struct View2D *v2d;
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
rctf *subrect; /* for using the camera rect within the 3d view */
rctf subrect_data;
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
float mat[4][4]; /* transform matrix on the strokes (introduced in [b770964]) */
} GP_SpaceConversion;
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
/**
* Check whether a given stroke segment is inside a circular brush
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
*
* \param mval The current screen-space coordinates (midpoint) of the brush
* \param mvalo The previous screen-space coordinates (midpoint) of the brush (NOT CURRENTLY USED)
* \param rad The radius of the brush
*
* \param x0, y0 The screen-space x and y coordinates of the start of the stroke segment
* \param x1, y1 The screen-space x and y coordinates of the end of the stroke segment
*/
bool gp_stroke_inside_circle(const int mval[2], const int UNUSED(mvalo[2]),
int rad, int x0, int y0, int x1, int y1);
/**
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
* Init settings for stroke point space conversions
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
*
* \param[out] r_gsc The space conversion settings struct, populated with necessary params
*/
void gp_point_conversion_init(struct bContext *C, GP_SpaceConversion *r_gsc);
/**
* Convert a Grease Pencil coordinate (i.e. can be 2D or 3D) to screenspace (2D)
*
* \param[out] r_x The screen-space x-coordinate of the point
* \param[out] r_y The screen-space y-coordinate of the point
*/
void gp_point_to_xy(GP_SpaceConversion *settings, struct bGPDstroke *gps, struct bGPDspoint *pt,
int *r_x, int *r_y);
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
/**
* Convert a screenspace point to a 3D Grease Pencil coordinate.
*
* For use with editing tools where it is easier to perform the operations in 2D,
* and then later convert the transformed points back to 3D.
*
* \param screeN_co The screenspace 2D coordinates to convert to
* \param[out] r_out The resulting 3D coordinates of the input point
*/
bool gp_point_xy_to_3d(GP_SpaceConversion *gsc, struct Scene *scene, const float screen_co[2], float r_out[3]);
Code Cleanup: Reshuffling some of the GPencil code * Moved the context handling stuff into gpencil_utils.c * Moved the datablock and layer operators out into their own file too. Again, these weren't related to the other stuff that much * Split the GPencil to Curves operator out into its own file (gpencil_convert.c). This was quite a massive blob of code (48kb) that was not that related to the other operators still in that file (gpencil_edit.c)
2015-04-02 16:29:33 +13:00
/* Poll Callbacks ------------------------------------ */
/* gpencil_utils.c */
int gp_add_poll(struct bContext *C);
int gp_active_layer_poll(struct bContext *C);
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
/* Copy/Paste Buffer --------------------------------- */
/* gpencil_edit.c */
extern ListBase gp_strokes_copypastebuf;
/* Stroke Editing ------------------------------------ */
void gp_stroke_delete_tagged_points(bGPDframe *gpf, bGPDstroke *gps, bGPDstroke *next_stroke, int tag_flags);
Code Cleanup - Style tweaks
2016-03-28 02:33:14 +13:00
/**
GPencil: Restore ability for Smooth brush to affect pressure values of strokes
2016-03-28 02:55:59 +13:00
* Apply smooth to stroke point
* \param gps Stroke to smooth
* \param i Point index
* \param inf Amount of smoothing to apply
* \param affect_pressure Apply smoothing to pressure values too?
*/
bool gp_smooth_stroke(bGPDstroke *gps, int i, float inf, bool affect_pressure);
Code Cleanup - Style tweaks
2016-03-28 02:33:14 +13:00
/**
GPencil: Code Cleanup - Simplify and clarify the code for subdividing a stroke
2016-03-28 02:56:43 +13:00
* Subdivide a stroke once, by adding points at the midpoint between each pair of points
Code Cleanup - Style tweaks
2016-03-28 02:33:14 +13:00
* \param gps Stroke data
GPencil: Code Cleanup - Simplify and clarify the code for subdividing a stroke
2016-03-28 02:56:43 +13:00
* \param new_totpoints Total number of points (after subdividing)
GPencil: Restore ability for Smooth brush to affect pressure values of strokes
2016-03-28 02:55:59 +13:00
*/
Code Cleanup - Style tweaks
2016-03-28 02:33:14 +13:00
void gp_subdivide_stroke(bGPDstroke *gps, const int new_totpoints);
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
/* Layers Enums -------------------------------------- */
struct EnumPropertyItem *ED_gpencil_layers_enum_itemf(struct bContext *C, struct PointerRNA *ptr, struct PropertyRNA *prop, bool *r_free);
struct EnumPropertyItem *ED_gpencil_layers_with_new_enum_itemf(struct bContext *C, struct PointerRNA *ptr, struct PropertyRNA *prop, bool *r_free);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
/* ***************************************************** */
/* Operator Defines */
2.5 - Grease Pencil Version 2 (Crude rebirth) This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks. However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
2009-08-26 12:01:15 +00:00
/* drawing ---------- */
void GPENCIL_OT_draw(struct wmOperatorType *ot);
Grease Pencil: Drawing Improvements * Smooth strokes can now be drawn again, with normal (i.e. reasonably speedy feedback again). Previously slow drawing was caused by a bad notifier being used - the full screen was redrawn each time instead of just the relevant region. Now, only the relevant region is redrawn while drawing, and a proper flush is done for the rest of the screen at the end. * Made drawing straight lines a proper drawing 'mode' for Grease Pencil now. Use the Ctrl-D-LMB hotkey to draw straight lines in this way. The (buffer) line drawn now will accurately represent the final straight line instead of drawing the freehand path taken as before.
2009-08-30 04:48:34 +00:00
/* Paint Modes for operator*/
typedef enum eGPencil_PaintModes {
GP_PAINTMODE_DRAW = 0,
GP_PAINTMODE_ERASER,
GP_PAINTMODE_DRAW_STRAIGHT,
New grease pencil mode: poly line drawing - It's like sketch mode for lines, but you're specifying line knots by clicking on position you want to add next knot. - View can be navigated between knots creation. - Holding LMB down and sliding mouse will lead to new segment preview so it can be created more accurate. Additional change: fixed GP->Bezier conversion. Last point used to be ignored in this operator.
2011-09-06 08:30:17 +00:00
GP_PAINTMODE_DRAW_POLY
Grease Pencil: Drawing Improvements * Smooth strokes can now be drawn again, with normal (i.e. reasonably speedy feedback again). Previously slow drawing was caused by a bad notifier being used - the full screen was redrawn each time instead of just the relevant region. Now, only the relevant region is redrawn while drawing, and a proper flush is done for the rest of the screen at the end. * Made drawing straight lines a proper drawing 'mode' for Grease Pencil now. Use the Ctrl-D-LMB hotkey to draw straight lines in this way. The (buffer) line drawn now will accurately represent the final straight line instead of drawing the freehand path taken as before.
2009-08-30 04:48:34 +00:00
} eGPencil_PaintModes;
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
/* stroke editing ----- */
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
void GPENCIL_OT_editmode_toggle(struct wmOperatorType *ot);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
void GPENCIL_OT_select(struct wmOperatorType *ot);
void GPENCIL_OT_select_all(struct wmOperatorType *ot);
void GPENCIL_OT_select_circle(struct wmOperatorType *ot);
void GPENCIL_OT_select_border(struct wmOperatorType *ot);
Lasso Select for GPencil Strokes
2014-12-02 13:52:48 +13:00
void GPENCIL_OT_select_lasso(struct wmOperatorType *ot);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
void GPENCIL_OT_select_linked(struct wmOperatorType *ot);
GPencil: Select Grouped (Shift G) This commit adds a "Select Grouped" operator. Although it is set up to allow more types of "grouping" in future, it current only supports a single mode (i.e. "Same Layer"). As a result, it does not pop up any menus/submenus in all the usual places.
2016-01-22 15:31:20 +13:00
void GPENCIL_OT_select_grouped(struct wmOperatorType *ot);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
void GPENCIL_OT_select_more(struct wmOperatorType *ot);
void GPENCIL_OT_select_less(struct wmOperatorType *ot);
GPencil: Added operators to select first and last points of strokes These are useful for removing overshoots at the end of closed strokes (for fills)
2016-05-09 17:23:15 +12:00
void GPENCIL_OT_select_first(struct wmOperatorType *ot);
void GPENCIL_OT_select_last(struct wmOperatorType *ot);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
void GPENCIL_OT_duplicate(struct wmOperatorType *ot);
void GPENCIL_OT_delete(struct wmOperatorType *ot);
GPencil: use ctrl+x/del for dissolve Move dissolve into own operator (as with mesh/armature)
2015-07-05 14:34:17 +10:00
void GPENCIL_OT_dissolve(struct wmOperatorType *ot);
GPencil Editing: Copy and Paste selected stroke segments with Ctrl-C and Ctrl-V
2015-01-01 12:36:01 +13:00
void GPENCIL_OT_copy(struct wmOperatorType *ot);
void GPENCIL_OT_paste(struct wmOperatorType *ot);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
void GPENCIL_OT_move_to_layer(struct wmOperatorType *ot);
void GPENCIL_OT_layer_change(struct wmOperatorType *ot);
void GPENCIL_OT_snap_to_grid(struct wmOperatorType *ot);
void GPENCIL_OT_snap_to_cursor(struct wmOperatorType *ot);
void GPENCIL_OT_snap_cursor_to_selected(struct wmOperatorType *ot);
void GPENCIL_OT_snap_cursor_to_center(struct wmOperatorType *ot);
/* stroke sculpting -- */
void GPENCIL_OT_brush_paint(struct wmOperatorType *ot);
Grease Pencil: UI (i.e. Panel) for Settings Restored the UI for access to the GP layers. There are still a few minor bugs here: * Wrong icons on the toggles - even when they're enabled, they only show a single state * The ID-template doesn't seem to be showing up. Dunno what's going wrong there...
2009-08-29 06:50:32 +00:00
/* buttons editing --- */
void GPENCIL_OT_data_add(struct wmOperatorType *ot);
void GPENCIL_OT_data_unlink(struct wmOperatorType *ot);
void GPENCIL_OT_layer_add(struct wmOperatorType *ot);
Grease Pencil - Storyboarding Features (merge from GPencil_EditStrokes branch) This merge-commit brings in a number of new features and workflow/UI improvements for working with Grease Pencil. While these were originally targetted at improving the workflow for creating 3D storyboards in Blender using the Grease Pencil, many of these changes should also prove useful in other workflows too. The main highlights here are: 1) It is now possible to edit Grease Pencil strokes - Use D Tab, or toggle the "Enable Editing" toggles in the Toolbar/Properties regions to enter "Stroke Edit Mode". In this mode, many common editing tools will operate on Grease Pencil stroke points instead. - Tools implemented include Select, Select All/Border/Circle/Linked/More/Less, Grab, Rotate, Scale, Bend, Shear, To Sphere, Mirror, Duplicate, Delete. - Proportional Editing works when using the transform tools 2) Grease Pencil stroke settings can now be animated NOTE: Currently drivers don't work, but if time allows, this may still be added before the release. 3) Strokes can be drawn with "filled" interiors, using a separate set of colour/opacity settings to the ones used for the lines themselves. This makes use of OpenGL filled polys, which has the limitation of only being able to fill convex shapes. Some artifacts may be visible on concave shapes (e.g. pacman's mouth will be overdrawn) 4) "Volumetric Strokes" - An alternative drawing technique for stroke drawing has been added which draws strokes as a series of screen-aligned discs. While this was originally a partial experimental technique at getting better quality 3D lines, the effects possible using this technique were interesting enough to warrant making this a dedicated feature. Best results when partial opacity and large stroke widths are used. 5) Improved Onion Skinning Support - Different colours can be selected for the before/after ghosts. To do so, enable the "colour wheel" toggle beside the Onion Skinning toggle, and set the colours accordingly. - Different numbers of ghosts can be shown before/after the current frame 6) Grease Pencil datablocks are now attached to the scene by default instead of the active object. - For a long time, the object-attachment has proved to be quite problematic for users to keep track of. Now that this is done at scene level, it is easier for most users to use. - An exception for old files (and for any addons which may benefit from object attachment instead), is that if the active object has a Grease Pencil datablock, that will be used instead. - It is not currently possible to choose object-attachment from the UI, but it is simple to do this from the console instead, by doing: context.active_object.grease_pencil = bpy.data.grease_pencil["blah"] 7) Various UI Cleanups - The layers UI has been cleaned up to use a list instead of the nested-panels design. Apart from saving space, this is also much nicer to look at now. - The UI code is now all defined in Python. To support this, it has been necessary to add some new context properties to make it easier to access these settings. e.g. "gpencil_data" for the datablock "active_gpencil_layer" and "active_gpencil_frame" for active data, "editable_gpencil_strokes" for the strokes that can be edited - The "stroke placement/alignment" settings (previously "Drawing Settings" at the bottom of the Grease Pencil panel in the Properties Region) is now located in the toolbar. These were more toolsettings than properties for how GPencil got drawn. - "Use Sketching Sessions" has been renamed "Continuous Drawing", as per a suggestion for an earlier discussion on developer.blender.org - By default, the painting operator will wait for a mouse button to be pressed before it starts creating the stroke. This is to make it easier to include this operator in various toolbars/menus/etc. To get it immediately starting (as when you hold down DKEy to draw), set "wait_for_input" to False. - GPencil Layers can be rearranged in the "Grease Pencil" mode of the Action Editor - Toolbar panels have been added to all the other editors which support these. 8) Pie menus for quick-access to tools A set of experimental pie menus has been included for quick access to many tools and settings. It is not necessary to use these to get things done, but they have been designed to help make certain common tasks easier. - Ctrl-D = The main pie menu. Reveals tools in a context sensitive and spatially stable manner. - D Q = "Quick Settings" pie. This allows quick access to the active layer's settings. Notably, colours, thickness, and turning onion skinning on/off.
2014-12-01 01:52:06 +13:00
void GPENCIL_OT_layer_remove(struct wmOperatorType *ot);
void GPENCIL_OT_layer_move(struct wmOperatorType *ot);
Operator to duplicate the active Grease Pencil layer TODO: this needs a proper "duplicate" icon, without the "ID" label
2014-12-31 14:20:44 +13:00
void GPENCIL_OT_layer_duplicate(struct wmOperatorType *ot);
Grease Pencil: UI (i.e. Panel) for Settings Restored the UI for access to the GP layers. There are still a few minor bugs here: * Wrong icons on the toggles - even when they're enabled, they only show a single state * The ID-template doesn't seem to be showing up. Dunno what's going wrong there...
2009-08-29 06:50:32 +00:00
GPencil: H/Shift-H/Alt-H now work to Hide and Reveal Layers in Strokes Edit Mode * H = Hide active layer * Shift-H = Hide non-active layers * Alt-H = Show all layers
2015-04-02 17:26:43 +13:00
void GPENCIL_OT_hide(struct wmOperatorType *ot);
void GPENCIL_OT_reveal(struct wmOperatorType *ot);
Grease Pencil: Merge GPencil_Editing_Stage3 branch into master This commit merges all the work done in the GPencil_Editing_Stage3 branch as of ef2aecf2db981b5344e0d14e7f074f1742b0b2f7 into master. For more details about the changes that this brings, see the WIP release notes: http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.77/GPencil
2015-12-13 21:03:13 +13:00
void GPENCIL_OT_lock_all(struct wmOperatorType *ot);
void GPENCIL_OT_unlock_all(struct wmOperatorType *ot);
void GPENCIL_OT_layer_isolate(struct wmOperatorType *ot);
Grease Pencil: Restored some editing operators (convert and delete active frame) * Convert operator - can currently be used to convert active Grease Pencil layer to curves. I had a look at making this part of a special "curve sketching" macro, though it seems that we cannot have modal operators coming first in a macro (and also cannot specify operator calling modes) * Delete Active Frame operator - does what its name say it does. It deletes the active frame for the active layer of Grease Pencil sketches.
2009-08-31 01:58:11 +00:00
void GPENCIL_OT_active_frame_delete(struct wmOperatorType *ot);
GPencil: Added a new version of the "delete active frame" operator which deletes on all editable layers This new operator will delete any GP frame it finds on the current frame, regardless of whether it's on the active layer or not. It will only remove the frames if the layer is editable, but otherwise, it will just go for it. The existing operator is great for use in the panel (where it only applies to the active frame), but it was not so good for all the other places where tools can be invoked (e.g. D-X, or Delete) as you're typically thinking about the whole scene more holisticaly than just caring about a particular layer.
2016-06-18 12:58:26 +12:00
void GPENCIL_OT_active_frames_delete_all(struct wmOperatorType *ot);
Grease Pencil: Restored some editing operators (convert and delete active frame) * Convert operator - can currently be used to convert active Grease Pencil layer to curves. I had a look at making this part of a special "curve sketching" macro, though it seems that we cannot have modal operators coming first in a macro (and also cannot specify operator calling modes) * Delete Active Frame operator - does what its name say it does. It deletes the active frame for the active layer of Grease Pencil sketches.
2009-08-31 01:58:11 +00:00
void GPENCIL_OT_convert(struct wmOperatorType *ot);
Grease pencil: non-blocking sketch sessions - Implement own undo stack for grease pencil, so now there'll be no keymaps conflicts. - Supported redo's during sketch session. - Get rid of flag stored in Globals -- use undo stack to check if grease pencil session is active.
2011-09-06 07:59:18 +00:00
/* undo stack ---------- */
void gpencil_undo_init(struct bGPdata *gpd);
void gpencil_undo_push(struct bGPdata *gpd);
void gpencil_undo_finish(void);
2.5 - Grease Pencil Version 2 (Crude rebirth) This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks. However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
2009-08-26 12:01:15 +00:00
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
/******************************************************* */
2.5 - Grease Pencil Version 2 (Crude rebirth) This commit is the start of the new Grease Pencil implementation. I've just ported the old code to make it work with operators, and to store its data in Grease-Pencil datablocks. However, this is currently still really buggy, with only the barebones of the drawing/creation tools restored (no UI panels, no options). To use (not recommended), use D+S+move_mouse (and click when finished) for now. There are some rather serious event handling errors going on here...
2009-08-26 12:01:15 +00:00
/* FILTERED ACTION DATA - TYPES ---> XXX DEPRECEATED OLD ANIM SYSTEM CODE! */
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
2.5 Patch from Joshua, converting Grease Pencil to 2.5. All GP data now is an ID block, allowing re-use, link and append. For better contextual control within 2.5, these GP ID's will get linked to actual data, like NodeTrees, Scenes, Images or Objects. That will ensure Undo works, and opens up exciting new use cases as well. :) Patch note: on reading files, GPencils linked from editors will get moved to the main library, using standard naming (indicating where it was used), and with "Fake User" set. That way the user can manually relink the pencils where appropriate. We can check on just linking GP to some default, like 3d window pencils to Scene? Nice to experiment with. Notes for Joshua: - for reading old GPencil, it has to use old code as well, meaning to tread data as "indirect data, within another ID". - Saving ID data means the chunk in file BHead needs the ID_GD code, and not "DATA", which indicates 'indirect data'. That's the file format spec. - I've added do_versions_gpencil_2_50(), feel free to further tweak things here, like linking things to scene or so. - Formerly GPencil saved 2.50 files won't convert gpencil
2009-04-20 10:13:55 +00:00
/* XXX - TODO: replace this with the modern bAnimListElem... */
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
/* This struct defines a structure used for quick access */
typedef struct bActListElem {
struct bActListElem *next, *prev;
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
style cleanup: gpencil & metaball
2012-05-08 18:29:02 +00:00
void *data; /* source data this elem represents */
int type; /* one of the ACTTYPE_* values */
int flag; /* copy of elem's flags for quick access */
int index; /* copy of adrcode where applicable */
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
style cleanup: gpencil & metaball
2012-05-08 18:29:02 +00:00
void *key_data; /* motion data - ipo or ipo-curve */
short datatype; /* type of motion data to expect */
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
style cleanup: gpencil & metaball
2012-05-08 18:29:02 +00:00
struct bActionGroup *grp; /* action group that owns the channel */
GPencil: Picky whitespace cleanup
2014-12-26 20:00:52 +01:00
style cleanup: gpencil & metaball
2012-05-08 18:29:02 +00:00
void *owner; /* will either be an action channel or fake ipo-channel (for keys) */
short ownertype; /* type of owner */
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
} bActListElem;
/******************************************************* */
/* FILTER ACTION DATA - METHODS/TYPES */
/* filtering flags - under what circumstances should a channel be added */
typedef enum ACTFILTER_FLAGS {
style cleanup: gpencil & metaball
2012-05-08 18:29:02 +00:00
ACTFILTER_VISIBLE = (1 << 0), /* should channels be visible */
ACTFILTER_SEL = (1 << 1), /* should channels be selected */
ACTFILTER_FOREDIT = (1 << 2), /* does editable status matter */
ACTFILTER_CHANNELS = (1 << 3), /* do we only care that it is a channel */
ACTFILTER_IPOKEYS = (1 << 4), /* only channels referencing ipo's */
ACTFILTER_ONLYICU = (1 << 5), /* only reference ipo-curves */
ACTFILTER_FORDRAWING = (1 << 6), /* make list for interface drawing */
ACTFILTER_ACTGROUPED = (1 << 7) /* belongs to the active group */
2.5 GPencil code back! Joshua will probably take this further. I've added XXX notes where fixes are required. Also note that ED_gpencil.h has all old exports, which is probably not needed, most can go to gpencil_intern.h Also added Makefile fixes for sculpt
2009-01-14 16:13:50 +00:00
} ACTFILTER_FLAGS;
/* Action Editor - Main Data types */
typedef enum ACTCONT_TYPES {
ACTCONT_NONE = 0,
ACTCONT_ACTION,
ACTCONT_SHAPEKEY,
ACTCONT_GPENCIL
} ACTCONT_TYPES;
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#endif /* __GPENCIL_INTERN_H__ */
Copy Permalink