archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
ae25863d6cb859ff8d18db41960ba3a0ff2dc8f1
blender-archive/source/blender/editors/mesh/mesh_intern.h

196 lines
6.8 KiB
C++
Raw Normal View History

2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/**
* $Id:
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
*/
/* Internal for editmesh_xxxx.c functions */
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
#ifndef MESH_INTERN_H
#define MESH_INTERN_H
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
struct bContext;
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
struct wmOperatorType;
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
#define UVCOPY(t, s) memcpy(t, s, 2 * sizeof(float));
/* ******************** editface.c */
int edgetag_context_check(Scene *scene, EditEdge *eed);
void edgetag_context_set(Scene *scene, EditEdge *eed, int val);
int edgetag_shortest_path(Scene *scene, EditMesh *em, EditEdge *source, EditEdge *target);
/* ******************* meshtools.c */
/* XXX move to uv editor? */
enum {
B_UVAUTO_REDRAW = 3301,
B_UVAUTO_SPHERE,
B_UVAUTO_CYLINDER,
B_UVAUTO_CYLRADIUS,
B_UVAUTO_WINDOW,
B_UVAUTO_CUBE,
B_UVAUTO_CUBESIZE,
B_UVAUTO_RESET,
B_UVAUTO_BOUNDS,
B_UVAUTO_TOP,
B_UVAUTO_FACE,
B_UVAUTO_OBJECT,
B_UVAUTO_ALIGNX,
B_UVAUTO_ALIGNY,
B_UVAUTO_UNWRAP,
B_UVAUTO_DRAWFACES
};
/* ******************* editmesh.c */
extern void free_editvert(EditMesh *em, EditVert *eve);
extern void free_editedge(EditMesh *em, EditEdge *eed);
extern void free_editface(EditMesh *em, EditFace *efa);
void free_editMesh(EditMesh *em);
extern void free_vertlist(EditMesh *em, ListBase *edve);
extern void free_edgelist(EditMesh *em, ListBase *lb);
extern void free_facelist(EditMesh *em, ListBase *lb);
extern void remedge(EditMesh *em, EditEdge *eed);
extern struct EditVert *addvertlist(EditMesh *em, float *vec, struct EditVert *example);
extern struct EditEdge *addedgelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2, struct EditEdge *example);
extern struct EditFace *addfacelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2, struct EditVert *v3, struct EditVert *v4, struct EditFace *example, struct EditFace *exampleEdges);
extern struct EditEdge *findedgelist(EditMesh *em, struct EditVert *v1, struct EditVert *v2);
EditVert *editedge_getOtherVert(EditEdge *eed, EditVert *eve);
EditVert *editedge_getSharedVert(EditEdge *eed, EditEdge *eed2);
int editedge_containsVert(struct EditEdge *eed, struct EditVert *eve);
int editface_containsVert(struct EditFace *efa, struct EditVert *eve);
int editface_containsEdge(struct EditFace *efa, struct EditEdge *eed);
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
void em_setup_viewcontext(struct bContext *C, ViewContext *vc);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_add.c */
/* ******************* editmesh_lib.c */
extern void EM_fgon_flags(EditMesh *em);
extern void EM_hide_reset(EditMesh *em);
extern int faceselectedOR(EditFace *efa, int flag);
extern int faceselectedAND(EditFace *efa, int flag);
void EM_remove_selection(EditMesh *em, void *data, int type);
void EM_set_actFace(EditMesh *em, EditFace *efa);
void EM_select_face(EditFace *efa, int sel);
void EM_clear_flag_all(EditMesh *em, int flag);
void EM_set_flag_all(EditMesh *em, int flag);
void EM_add_data_layer(EditMesh *em, CustomData *data, int type);
void EM_data_interp_from_verts(EditMesh *em, EditVert *v1, EditVert *v2, EditVert *eve, float fac);
void EM_data_interp_from_faces(EditMesh *em, EditFace *efa1, EditFace *efa2, EditFace *efan, int i1, int i2, int i3, int i4);
int EM_nvertices_selected(EditMesh *em);
int EM_nfaces_selected(EditMesh *em);
float EM_face_area(EditFace *efa);
float EM_face_perimeter(EditFace *efa);
void EM_store_selection(EditMesh *em, void *data, int type);
extern EditFace *exist_face(EditMesh *em, EditVert *v1, EditVert *v2, EditVert *v3, EditVert *v4);
extern void flipface(EditMesh *em, EditFace *efa); // flips for normal direction
extern int compareface(EditFace *vl1, EditFace *vl2);
/* flag for selection bits, *nor will be filled with normal for extrusion constraint */
/* return value defines if such normal was set */
extern short extrudeflag_face_indiv(EditMesh *em, short flag, float *nor);
extern short extrudeflag_verts_indiv(EditMesh *em, short flag, float *nor);
extern short extrudeflag_edges_indiv(EditMesh *em, short flag, float *nor);
2.5 From the anti-globalization department: G.obedit terminated! Wherever possible, use CTX_data_edit_object(C) to get this now. It's stored in scene now, and the screen context has it defined.
2009-01-02 19:10:35 +00:00
extern short extrudeflag_vert(Object *obedit, EditMesh *em, short flag, float *nor);
extern short extrudeflag(Object *obedit, EditMesh *em, short flag, float *nor);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void adduplicateflag(EditMesh *em, int flag);
extern void delfaceflag(EditMesh *em, int flag);
extern void rotateflag(EditMesh *em, short flag, float *cent, float rotmat[][3]);
extern void translateflag(EditMesh *em, short flag, float *vec);
extern int convex(float *v1, float *v2, float *v3, float *v4);
extern struct EditFace *EM_face_from_faces(EditMesh *em, struct EditFace *efa1,
struct EditFace *efa2, int i1, int i2, int i3, int i4);
/* ******************* editmesh_loop.c */
#define KNIFE_PROMPT 0
#define KNIFE_EXACT 1
#define KNIFE_MIDPOINT 2
#define KNIFE_MULTICUT 3
#define LOOP_SELECT 1
#define LOOP_CUT 2
/* ******************* editmesh_mods.c */
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
void MESH_OT_de_select_all(struct wmOperatorType *ot);
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
extern EditEdge *findnearestedge(ViewContext *vc, int *dist);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
extern void EM_automerge(int update);
void editmesh_select_by_material(EditMesh *em, int index);
void righthandfaces(EditMesh *em, int select); /* makes faces righthand turning */
void EM_select_more(EditMesh *em);
/**
* findnearestvert
*
* dist (in/out): minimal distance to the nearest and at the end, actual distance
* sel: selection bias
* if SELECT, selected vertice are given a 5 pixel bias to make them farter than unselect verts
* if 0, unselected vertice are given the bias
* strict: if 1, the vertice corresponding to the sel parameter are ignored and not just biased
*/
2.5 EditMesh: further cleanup, made derivedmesh itterator functions work by gathering all related data in local ViewContext struct. (scene, editmesh, region, view3d, obedit). Also removed bad inclusion of view3d_intern.h in mesh module.
2008-12-30 16:03:29 +00:00
extern EditVert *findnearestvert(ViewContext *vc, int *dist, short sel, short strict);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
/* ******************* editmesh_tools.c */
#define SUBDIV_SELECT_ORIG 0
#define SUBDIV_SELECT_INNER 1
#define SUBDIV_SELECT_INNER_SEL 2
#define SUBDIV_SELECT_LOOPCUT 3
void join_triangles(EditMesh *em);
int removedoublesflag(EditMesh *em, short flag, short automerge, float limit); /* return amount */
2.5 From the anti-globalization department: G.obedit terminated! Wherever possible, use CTX_data_edit_object(C) to get this now. It's stored in scene now, and the screen context has it defined.
2009-01-02 19:10:35 +00:00
void esubdivideflag(Object *obedit, EditMesh *em, int flag, float rad, int beauty, int numcuts, int seltype);
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
int EdgeSlide(EditMesh *em, short immediate, float imperc);
2.5 - Edit mode Mesh undo/redo back (undo for editmodes needed recode, todo for curve/lattice/etc) - Added border select for edit mesh - Added Akey (de)select all for edit mesh - Added notifiers for mode changes. This is also the first trial to dynamically add/remove keymap handlers, based on modes. For that reason the Object keymap was split in 2, modal and non-modal. On TABkey, the view3d listener removes and adds maps. The view3d keymap still handles generic mouse/border selection. Internally it will verify modes. The modes are not re-implemented still... have to move this to scene context.
2009-01-01 13:15:35 +00:00
#endif // MESH_INTERN_H
2.5 Editmesh code cleaned and compiling/linking. A whopping 20k lines back! :) Not that it does stuff... editmode in/out has to be done, and loads of operators. Also linking/exporting editmesh calls has to be reviewed. Also: added a blender_test_break() mechanism in BKE.
2008-12-30 13:16:14 +00:00
Copy Permalink