Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
/*
|
|
|
|
|
* ***** BEGIN GPL LICENSE BLOCK *****
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
|
|
|
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
|
|
|
*
|
|
|
|
|
* The Original Code is Copyright (C) 2013 Blender Foundation.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Original Author: Joshua Leung
|
|
|
|
|
* Contributor(s): None Yet
|
|
|
|
|
*
|
|
|
|
|
* ***** END GPL LICENSE BLOCK *****
|
|
|
|
|
*/
|
|
|
|
|
|
2016-06-19 06:25:54 +10:00
|
|
|
/** \file blender/depsgraph/intern/nodes/deg_node_component.cc
|
2015-05-20 12:54:45 +10:00
|
|
|
* \ingroup depsgraph
|
|
|
|
|
*/
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
#include "intern/nodes/deg_node_component.h"
|
|
|
|
|
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
#include <stdio.h>
|
2016-11-07 12:09:42 +01:00
|
|
|
#include <cstring> /* required for STREQ later on. */
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
|
|
|
|
extern "C" {
|
|
|
|
|
#include "BLI_utildefines.h"
|
|
|
|
|
|
|
|
|
|
#include "DNA_object_types.h"
|
|
|
|
|
|
|
|
|
|
#include "BKE_action.h"
|
|
|
|
|
} /* extern "C" */
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
#include "intern/nodes/deg_node_operation.h"
|
|
|
|
|
#include "intern/depsgraph_intern.h"
|
|
|
|
|
#include "util/deg_util_foreach.h"
|
|
|
|
|
#include "util/deg_util_hash.h"
|
|
|
|
|
|
|
|
|
|
namespace DEG {
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
|
|
|
|
/* *********** */
|
|
|
|
|
/* Outer Nodes */
|
|
|
|
|
|
|
|
|
|
/* Standard Component Methods ============================= */
|
|
|
|
|
|
2016-11-03 16:03:12 +01:00
|
|
|
ComponentDepsNode::OperationIDKey::OperationIDKey()
|
|
|
|
|
: opcode(DEG_OPCODE_OPERATION),
|
|
|
|
|
name(""),
|
|
|
|
|
name_tag(-1)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ComponentDepsNode::OperationIDKey::OperationIDKey(eDepsOperation_Code opcode)
|
|
|
|
|
: opcode(opcode),
|
|
|
|
|
name(""),
|
|
|
|
|
name_tag(-1)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ComponentDepsNode::OperationIDKey::OperationIDKey(eDepsOperation_Code opcode,
|
|
|
|
|
const char *name,
|
|
|
|
|
int name_tag)
|
|
|
|
|
: opcode(opcode),
|
|
|
|
|
name(name),
|
|
|
|
|
name_tag(name_tag)
|
|
|
|
|
{
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
string ComponentDepsNode::OperationIDKey::identifier() const
|
|
|
|
|
{
|
|
|
|
|
char codebuf[5];
|
|
|
|
|
BLI_snprintf(codebuf, sizeof(codebuf), "%d", opcode);
|
|
|
|
|
return string("OperationIDKey(") + codebuf + ", " + name + ")";
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
bool ComponentDepsNode::OperationIDKey::operator==(
|
|
|
|
|
const OperationIDKey &other) const
|
|
|
|
|
{
|
|
|
|
|
return (opcode == other.opcode) &&
|
|
|
|
|
(STREQ(name, other.name)) &&
|
|
|
|
|
(name_tag == other.name_tag);
|
|
|
|
|
}
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
static unsigned int comp_node_hash_key(const void *key_v)
|
|
|
|
|
{
|
|
|
|
|
const ComponentDepsNode::OperationIDKey *key =
|
|
|
|
|
reinterpret_cast<const ComponentDepsNode::OperationIDKey *>(key_v);
|
|
|
|
|
return hash_combine(BLI_ghashutil_uinthash(key->opcode),
|
2016-11-03 14:45:47 +01:00
|
|
|
BLI_ghashutil_strhash_p(key->name));
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static bool comp_node_hash_key_cmp(const void *a, const void *b)
|
|
|
|
|
{
|
|
|
|
|
const ComponentDepsNode::OperationIDKey *key_a =
|
|
|
|
|
reinterpret_cast<const ComponentDepsNode::OperationIDKey *>(a);
|
|
|
|
|
const ComponentDepsNode::OperationIDKey *key_b =
|
|
|
|
|
reinterpret_cast<const ComponentDepsNode::OperationIDKey *>(b);
|
|
|
|
|
return !(*key_a == *key_b);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void comp_node_hash_key_free(void *key_v)
|
|
|
|
|
{
|
|
|
|
|
typedef ComponentDepsNode::OperationIDKey OperationIDKey;
|
|
|
|
|
OperationIDKey *key = reinterpret_cast<OperationIDKey *>(key_v);
|
|
|
|
|
OBJECT_GUARDED_DELETE(key, OperationIDKey);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void comp_node_hash_value_free(void *value_v)
|
|
|
|
|
{
|
|
|
|
|
OperationDepsNode *op_node = reinterpret_cast<OperationDepsNode *>(value_v);
|
|
|
|
|
OBJECT_GUARDED_DELETE(op_node, OperationDepsNode);
|
|
|
|
|
}
|
|
|
|
|
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
ComponentDepsNode::ComponentDepsNode() :
|
|
|
|
|
entry_operation(NULL),
|
2017-04-05 11:11:44 +02:00
|
|
|
exit_operation(NULL)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
operations_map = BLI_ghash_new(comp_node_hash_key,
|
|
|
|
|
comp_node_hash_key_cmp,
|
|
|
|
|
"Depsgraph id hash");
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Initialize 'component' node - from pointer data given */
|
|
|
|
|
void ComponentDepsNode::init(const ID * /*id*/,
|
2016-11-03 14:45:47 +01:00
|
|
|
const char * /*subdata*/)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
|
|
|
|
/* hook up eval context? */
|
|
|
|
|
// XXX: maybe this needs a special API?
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Free 'component' node */
|
|
|
|
|
ComponentDepsNode::~ComponentDepsNode()
|
|
|
|
|
{
|
|
|
|
|
clear_operations();
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
if (operations_map != NULL) {
|
|
|
|
|
BLI_ghash_free(operations_map,
|
|
|
|
|
comp_node_hash_key_free,
|
|
|
|
|
comp_node_hash_value_free);
|
|
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
string ComponentDepsNode::identifier() const
|
|
|
|
|
{
|
2016-11-03 14:45:47 +01:00
|
|
|
string idname = this->owner->name;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
2016-06-21 12:51:18 +02:00
|
|
|
char typebuf[16];
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
sprintf(typebuf, "(%d)", type);
|
|
|
|
|
|
2017-04-05 11:11:44 +02:00
|
|
|
return string(typebuf) + name + " : " + idname;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OperationDepsNode *ComponentDepsNode::find_operation(OperationIDKey key) const
|
|
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
OperationDepsNode *node = reinterpret_cast<OperationDepsNode *>(BLI_ghash_lookup(operations_map, &key));
|
|
|
|
|
if (node != NULL) {
|
|
|
|
|
return node;
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
fprintf(stderr, "%s: find_operation(%s) failed\n",
|
|
|
|
|
this->identifier().c_str(), key.identifier().c_str());
|
|
|
|
|
BLI_assert(!"Request for non-existing operation, should not happen");
|
|
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2016-11-03 14:31:27 +01:00
|
|
|
OperationDepsNode *ComponentDepsNode::find_operation(eDepsOperation_Code opcode,
|
2016-11-03 14:45:47 +01:00
|
|
|
const char *name,
|
2016-11-03 14:31:27 +01:00
|
|
|
int name_tag) const
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2016-11-03 14:31:27 +01:00
|
|
|
OperationIDKey key(opcode, name, name_tag);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
return find_operation(key);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OperationDepsNode *ComponentDepsNode::has_operation(OperationIDKey key) const
|
|
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
return reinterpret_cast<OperationDepsNode *>(BLI_ghash_lookup(operations_map, &key));
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OperationDepsNode *ComponentDepsNode::has_operation(eDepsOperation_Code opcode,
|
2016-11-03 14:45:47 +01:00
|
|
|
const char *name,
|
2016-11-03 14:31:27 +01:00
|
|
|
int name_tag) const
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2016-11-03 14:31:27 +01:00
|
|
|
OperationIDKey key(opcode, name, name_tag);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
return has_operation(key);
|
|
|
|
|
}
|
|
|
|
|
|
2016-11-03 14:31:27 +01:00
|
|
|
OperationDepsNode *ComponentDepsNode::add_operation(eDepsOperation_Type optype,
|
|
|
|
|
DepsEvalOperationCb op,
|
|
|
|
|
eDepsOperation_Code opcode,
|
2016-11-03 14:45:47 +01:00
|
|
|
const char *name,
|
2016-11-03 14:31:27 +01:00
|
|
|
int name_tag)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
2016-11-03 14:31:27 +01:00
|
|
|
OperationDepsNode *op_node = has_operation(opcode, name, name_tag);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
if (!op_node) {
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
DepsNodeFactory *factory = deg_get_node_factory(DEPSNODE_TYPE_OPERATION);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
op_node = (OperationDepsNode *)factory->create_node(this->owner->id, "", name);
|
|
|
|
|
|
|
|
|
|
/* register opnode in this component's operation set */
|
2016-11-03 14:31:27 +01:00
|
|
|
OperationIDKey *key = OBJECT_GUARDED_NEW(OperationIDKey, opcode, name, name_tag);
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
BLI_ghash_insert(operations_map, key, op_node);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
|
|
|
|
|
/* set as entry/exit node of component (if appropriate) */
|
|
|
|
|
if (optype == DEPSOP_TYPE_INIT) {
|
|
|
|
|
BLI_assert(this->entry_operation == NULL);
|
|
|
|
|
this->entry_operation = op_node;
|
|
|
|
|
}
|
|
|
|
|
else if (optype == DEPSOP_TYPE_POST) {
|
|
|
|
|
// XXX: review whether DEPSOP_TYPE_OUT is better than DEPSOP_TYPE_POST, or maybe have both?
|
|
|
|
|
BLI_assert(this->exit_operation == NULL);
|
|
|
|
|
this->exit_operation = op_node;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* set backlink */
|
|
|
|
|
op_node->owner = this;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
fprintf(stderr, "add_operation: Operation already exists - %s has %s at %p\n",
|
|
|
|
|
this->identifier().c_str(), op_node->identifier().c_str(), op_node);
|
|
|
|
|
BLI_assert(!"Should not happen!");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* attach extra data */
|
|
|
|
|
op_node->evaluate = op;
|
|
|
|
|
op_node->optype = optype;
|
|
|
|
|
op_node->opcode = opcode;
|
|
|
|
|
op_node->name = name;
|
|
|
|
|
|
|
|
|
|
return op_node;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void ComponentDepsNode::clear_operations()
|
|
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
if (operations_map != NULL) {
|
|
|
|
|
BLI_ghash_clear(operations_map,
|
|
|
|
|
comp_node_hash_key_free,
|
|
|
|
|
comp_node_hash_value_free);
|
|
|
|
|
}
|
|
|
|
|
foreach (OperationDepsNode *op_node, operations) {
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
OBJECT_GUARDED_DELETE(op_node, OperationDepsNode);
|
|
|
|
|
}
|
|
|
|
|
operations.clear();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void ComponentDepsNode::tag_update(Depsgraph *graph)
|
|
|
|
|
{
|
|
|
|
|
OperationDepsNode *entry_op = get_entry_operation();
|
|
|
|
|
if (entry_op != NULL && entry_op->flag & DEPSOP_FLAG_NEEDS_UPDATE) {
|
|
|
|
|
return;
|
|
|
|
|
}
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
foreach (OperationDepsNode *op_node, operations) {
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
op_node->tag_update(graph);
|
|
|
|
|
}
|
2016-06-01 10:10:39 +02:00
|
|
|
// It is possible that tag happens before finalization.
|
|
|
|
|
if (operations_map != NULL) {
|
|
|
|
|
GHASH_FOREACH_BEGIN(OperationDepsNode *, op_node, operations_map)
|
|
|
|
|
{
|
|
|
|
|
op_node->tag_update(graph);
|
|
|
|
|
}
|
|
|
|
|
GHASH_FOREACH_END();
|
|
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OperationDepsNode *ComponentDepsNode::get_entry_operation()
|
|
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
if (entry_operation) {
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
return entry_operation;
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
}
|
|
|
|
|
else if (operations_map != NULL && BLI_ghash_size(operations_map) == 1) {
|
|
|
|
|
OperationDepsNode *op_node = NULL;
|
|
|
|
|
/* TODO(sergey): This is somewhat slow. */
|
|
|
|
|
GHASH_FOREACH_BEGIN(OperationDepsNode *, tmp, operations_map)
|
|
|
|
|
{
|
|
|
|
|
op_node = tmp;
|
|
|
|
|
}
|
|
|
|
|
GHASH_FOREACH_END();
|
|
|
|
|
/* Cache for the subsequent usage. */
|
|
|
|
|
entry_operation = op_node;
|
|
|
|
|
return op_node;
|
|
|
|
|
}
|
2016-06-19 06:25:54 +10:00
|
|
|
else if (operations.size() == 1) {
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
return operations[0];
|
|
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
OperationDepsNode *ComponentDepsNode::get_exit_operation()
|
|
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
if (exit_operation) {
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
return exit_operation;
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
}
|
|
|
|
|
else if (operations_map != NULL && BLI_ghash_size(operations_map) == 1) {
|
|
|
|
|
OperationDepsNode *op_node = NULL;
|
|
|
|
|
/* TODO(sergey): This is somewhat slow. */
|
|
|
|
|
GHASH_FOREACH_BEGIN(OperationDepsNode *, tmp, operations_map)
|
|
|
|
|
{
|
|
|
|
|
op_node = tmp;
|
|
|
|
|
}
|
|
|
|
|
GHASH_FOREACH_END();
|
|
|
|
|
/* Cache for the subsequent usage. */
|
|
|
|
|
exit_operation = op_node;
|
|
|
|
|
return op_node;
|
|
|
|
|
}
|
2016-06-19 06:25:54 +10:00
|
|
|
else if (operations.size() == 1) {
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
return operations[0];
|
|
|
|
|
}
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
return NULL;
|
|
|
|
|
}
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
void ComponentDepsNode::finalize_build()
|
|
|
|
|
{
|
|
|
|
|
operations.reserve(BLI_ghash_size(operations_map));
|
|
|
|
|
GHASH_FOREACH_BEGIN(OperationDepsNode *, op_node, operations_map)
|
|
|
|
|
{
|
|
|
|
|
operations.push_back(op_node);
|
|
|
|
|
}
|
|
|
|
|
GHASH_FOREACH_END();
|
|
|
|
|
BLI_ghash_free(operations_map,
|
|
|
|
|
comp_node_hash_key_free,
|
|
|
|
|
NULL);
|
|
|
|
|
operations_map = NULL;
|
|
|
|
|
}
|
|
|
|
|
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
/* Parameter Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(ParametersComponentDepsNode, DEPSNODE_TYPE_PARAMETERS, "Parameters Component");
|
|
|
|
|
static DepsNodeFactoryImpl<ParametersComponentDepsNode> DNTI_PARAMETERS;
|
|
|
|
|
|
|
|
|
|
/* Animation Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(AnimationComponentDepsNode, DEPSNODE_TYPE_ANIMATION, "Animation Component");
|
|
|
|
|
static DepsNodeFactoryImpl<AnimationComponentDepsNode> DNTI_ANIMATION;
|
|
|
|
|
|
|
|
|
|
/* Transform Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(TransformComponentDepsNode, DEPSNODE_TYPE_TRANSFORM, "Transform Component");
|
|
|
|
|
static DepsNodeFactoryImpl<TransformComponentDepsNode> DNTI_TRANSFORM;
|
|
|
|
|
|
|
|
|
|
/* Proxy Component Defines ================================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(ProxyComponentDepsNode, DEPSNODE_TYPE_PROXY, "Proxy Component");
|
|
|
|
|
static DepsNodeFactoryImpl<ProxyComponentDepsNode> DNTI_PROXY;
|
|
|
|
|
|
|
|
|
|
/* Geometry Component Defines ============================= */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(GeometryComponentDepsNode, DEPSNODE_TYPE_GEOMETRY, "Geometry Component");
|
|
|
|
|
static DepsNodeFactoryImpl<GeometryComponentDepsNode> DNTI_GEOMETRY;
|
|
|
|
|
|
|
|
|
|
/* Sequencer Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(SequencerComponentDepsNode, DEPSNODE_TYPE_SEQUENCER, "Sequencer Component");
|
|
|
|
|
static DepsNodeFactoryImpl<SequencerComponentDepsNode> DNTI_SEQUENCER;
|
|
|
|
|
|
|
|
|
|
/* Pose Component ========================================= */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(PoseComponentDepsNode, DEPSNODE_TYPE_EVAL_POSE, "Pose Eval Component");
|
|
|
|
|
static DepsNodeFactoryImpl<PoseComponentDepsNode> DNTI_EVAL_POSE;
|
|
|
|
|
|
|
|
|
|
/* Bone Component ========================================= */
|
|
|
|
|
|
|
|
|
|
/* Initialize 'bone component' node - from pointer data given */
|
2016-11-03 14:45:47 +01:00
|
|
|
void BoneComponentDepsNode::init(const ID *id, const char *subdata)
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
|
|
|
|
/* generic component-node... */
|
|
|
|
|
ComponentDepsNode::init(id, subdata);
|
|
|
|
|
|
|
|
|
|
/* name of component comes is bone name */
|
|
|
|
|
/* TODO(sergey): This sets name to an empty string because subdata is
|
|
|
|
|
* empty. Is it a bug?
|
|
|
|
|
*/
|
|
|
|
|
//this->name = subdata;
|
|
|
|
|
|
|
|
|
|
/* bone-specific node data */
|
|
|
|
|
Object *ob = (Object *)id;
|
2016-11-03 14:45:47 +01:00
|
|
|
this->pchan = BKE_pose_channel_find_name(ob->pose, subdata);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(BoneComponentDepsNode, DEPSNODE_TYPE_BONE, "Bone Component");
|
|
|
|
|
static DepsNodeFactoryImpl<BoneComponentDepsNode> DNTI_BONE;
|
|
|
|
|
|
|
|
|
|
/* Particles Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(ParticlesComponentDepsNode, DEPSNODE_TYPE_EVAL_PARTICLES, "Particles Component");
|
|
|
|
|
static DepsNodeFactoryImpl<ParticlesComponentDepsNode> DNTI_EVAL_PARTICLES;
|
|
|
|
|
|
|
|
|
|
/* Shading Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(ShadingComponentDepsNode, DEPSNODE_TYPE_SHADING, "Shading Component");
|
|
|
|
|
static DepsNodeFactoryImpl<ShadingComponentDepsNode> DNTI_SHADING;
|
|
|
|
|
|
Basic Alembic support
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
|
|
|
/* Cache Component Defines ============================ */
|
|
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(CacheComponentDepsNode, DEPSNODE_TYPE_CACHE, "Cache Component");
|
|
|
|
|
static DepsNodeFactoryImpl<CacheComponentDepsNode> DNTI_CACHE;
|
|
|
|
|
|
2017-04-05 11:11:44 +02:00
|
|
|
/* Layer Collections Defines ============================ */
|
2017-03-17 12:47:29 +01:00
|
|
|
|
|
|
|
|
DEG_DEPSNODE_DEFINE(LayerCollectionsDepsNode, DEPSNODE_TYPE_LAYER_COLLECTIONS, "Layer Collections Component");
|
|
|
|
|
static DepsNodeFactoryImpl<LayerCollectionsDepsNode> DNTI_LAYER_COLLECTIONS;
|
|
|
|
|
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
/* Node Types Register =================================== */
|
|
|
|
|
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
void deg_register_component_depsnodes()
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
{
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
deg_register_node_typeinfo(&DNTI_PARAMETERS);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_PROXY);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_ANIMATION);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_TRANSFORM);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_GEOMETRY);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_SEQUENCER);
|
|
|
|
|
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_EVAL_POSE);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_BONE);
|
|
|
|
|
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_EVAL_PARTICLES);
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_SHADING);
|
Basic Alembic support
All in all, this patch adds an Alembic importer, an Alembic exporter,
and a new CacheFile data block which, for now, wraps around an Alembic
archive. This data block is made available through a new modifier ("Mesh
Sequence Cache") as well as a new constraint ("Transform Cache") to
somewhat properly support respectively geometric and transformation data
streaming from alembic caches.
A more in-depth documentation is to be found on the wiki, as well as a
guide to compile alembic: https://wiki.blender.org/index.php/
User:Kevindietrich/AlembicBasicIo.
Many thanks to everyone involved in this little project, and huge shout
out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini
and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the
custom builds and compile fixes.
Reviewers: sergey, campbellbarton, mont29
Reviewed By: sergey, campbellbarton, mont29
Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
|
|
|
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_CACHE);
|
2017-03-17 12:47:29 +01:00
|
|
|
|
|
|
|
|
deg_register_node_typeinfo(&DNTI_LAYER_COLLECTIONS);
|
Depsgraph: New dependency graph integration commit
This commit integrates the work done so far on the new dependency graph system,
where goal was to replace legacy depsgraph with the new one, supporting loads of
neat features like:
- More granular dependency relation nature, which solves issues with fake cycles
in the dependencies.
- Move towards all-animatable, by better integration of drivers into the system.
- Lay down some basis for upcoming copy-on-write, overrides and so on.
The new system is living side-by-side with the previous one and disabled by
default, so nothing will become suddenly broken. The way to enable new depsgraph
is to pass `--new-depsgraph` command line argument.
It's a bit early to consider the system production-ready, there are some TODOs
and issues were discovered during the merge period, they'll be addressed ASAP.
But it's important to merge, because it's the only way to attract artists to
really start testing this system.
There are number of assorted documents related on the design of the new system:
* http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents
* http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph
There are also some user-related information online:
* http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/
* http://code.blender.org/2015/03/more-dependency-graph-tricks/
Kudos to everyone who was involved into the project:
- Joshua "Aligorith" Leung -- design specification, initial code
- Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes
- Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the
project and so
- Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the
issues and recording/writing documentation.
- Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
|
|
|
}
|
Depsgraph: Cleanup and code simplification
This is mainly a maintenance commit which was aimed to make work with
this module more pleasant and solve such issues as:
- Annoyance with looong files, which had craftload in them
- Usage of STL for the data structures we've got in BLI
- Possible symbol conflicts
- Not real clear layout of what is located where
So in this commit the following changes are done:
- STL is prohibited, it's not really predictable on various compilers,
with our BLI algorithms we can predict things much better.
There are still few usages of std::vector, but that we'll be
solving later once we've got similar thing in BLI.
- Simplify foreach loops, avoid using const_iterator all over the place.
- New directory layout, which is hopefully easier to follow.
- Some files were split, some of them will be split soon.
The idea of this is to split huge functions into own files with
good documentation and everything.
- Removed stuff which was planned for use in the future but was never
finished, tested or anything.
Let's wipe it out for now, and bring back once we really start using
it, so it'll be more clear if it solves our needs.
- All the internal routines were moved to DEG namespace to separate
them better from rest of blender.
Some places now annoyingly using DEG::foo, but that we can olve by
moving some utility functions inside of the namespace.
While working on this we've found some hotspot in updates flush, so
now playback of blenrig is few percent faster (something like 96fps
with previous master and around 99-100fps after this change).
Not saying it's something final, there is still room for cleanup and
API simplification, but those might happen as a regular development
now without doing any global changes.
2016-05-27 18:01:18 +02:00
|
|
|
|
|
|
|
|
} // namespace DEG
|