archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
e93aa9c0fc669d0b09a1159e8ef1e2b9dfcc7320
blender-archive/source/blender/editors/space_text/text_intern.h

184 lines
6.2 KiB
C++
Raw Normal View History

doxygen: prevent GPL license block from being parsed as doxygen comment.
2011-02-23 10:52:22 +00:00
/*
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
Cleanup: trailing whitespace (comment blocks) Strip unindented comment blocks - mainly headers to avoid conflicts.
2018-06-01 18:19:39 +02:00
* of the License, or (at your option) any later version.
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
correct fsf address
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
*
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
* The Original Code is Copyright (C) 2009 Blender Foundation.
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
* All rights reserved.
*/
doxygen: blender/editors tagged.
2011-02-27 20:29:51 +00:00
doxygen: add newline after \file While \file doesn't need an argument, it can't have another doxy command after it.
2019-02-18 08:08:12 +11:00
/** \file
* \ingroup sptext
doxygen: blender/editors tagged.
2011-02-27 20:29:51 +00:00
*/
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#ifndef __TEXT_INTERN_H__
#define __TEXT_INTERN_H__
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
/* internal exports only */
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
struct ARegion;
struct ScrArea;
struct SpaceText;
struct Text;
struct TextLine;
Cleanup: sort forward declarations of enum & struct Done using: source/tools/utils_maintenance/c_sort_blocks.py
2019-01-28 21:08:24 +11:00
struct bContext;
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
struct wmOperatorType;
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
/* text_draw.c */
void draw_text_main(struct SpaceText *st, struct ARegion *ar);
editors/space_* build without unused args warnings
2010-10-16 08:03:28 +00:00
void text_update_line_edited(struct TextLine *line);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void text_update_edited(struct Text *text);
2.5: Couple of small fun features * Text window font size now supports full range 8-32, instead of just 12 and 15. I added BLF_fixed_width to get the character width of a fixed size font. * Buttons do undo push on change again. * Animated/Keyframe/Driver colors are now themable, with blend value to blend with original color. Set this to 0.5 now to give colors less constrast. * Fix tooltip popping up with RMB menu open, and missing redraw. * Autokeyframe now works for buttons. * Driver expressions can be edited in place in a button now. (still some refresh issues). * Also made python driver default for the Add Driver function in the RMB button. This way you don't have to open a Graph editor if you just want to type an expression. Also, the default expression then is the current value. * Tooltips now show some extra info, not sure what is good to have, but currently I added: * Shortcut key for operator buttons. * Python struct & property name for RNA buttons. * Expression for driven values. * Value for text/search/pointer buttons.
2009-07-12 02:06:15 +00:00
void text_update_character_width(struct SpaceText *st);
cleanup: warnings
2015-01-06 18:21:46 +11:00
void text_scroll_to_cursor(struct SpaceText *st, struct ARegion *ar, const bool center);
void text_scroll_to_cursor__area(struct SpaceText *st, struct ScrArea *sa, const bool center);
Fix #19580: text editor - current line is dependent on the text datablock, not the editor.
2010-01-26 12:12:31 +00:00
void text_update_cursor_moved(struct bContext *C);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
UI: Text Editor Visual Changes Various small changes to Text Editor, mostly to do with scaling, alignment, and theme support. Differential Revision: https://developer.blender.org/D6268 Reviewed by Campbell Barton
2019-11-20 12:59:19 -08:00
/* Padding around line numbers in character widths. */
#define TXT_NUMCOL_PAD 1.0f
/* Total width of the optional line numbers column. */
#define TXT_NUMCOL_WIDTH(st) (st->cwidth * (st->linenrs_tot + (2 * TXT_NUMCOL_PAD)))
/* Padding on left of body text in character units. */
#define TXT_BODY_LPAD 1.0f
/* Left position of body text. */
Cleanup: clang-format Also remove unused vars.
2019-11-21 23:06:06 +11:00
#define TXT_BODY_LEFT(st) \
(st->showlinenrs ? TXT_NUMCOL_WIDTH(st) : 0) + (TXT_BODY_LPAD * st->cwidth)
UI: Text Editor Visual Changes Various small changes to Text Editor, mostly to do with scaling, alignment, and theme support. Differential Revision: https://developer.blender.org/D6268 Reviewed by Campbell Barton
2019-11-20 12:59:19 -08:00
ClangFormat: apply to source, most of intern Apply clang format as proposed in T53211. For details on usage and instructions for migrating branches without conflicts, see: https://wiki.blender.org/wiki/Tools/ClangFormat
2019-04-17 06:17:24 +02:00
#define TXT_SCROLL_WIDTH U.widget_unit
#define TXT_SCROLL_SPACE ((int)(0.1f * U.widget_unit))
UI: Text Editor Visual Changes Various small changes to Text Editor, mostly to do with scaling, alignment, and theme support. Differential Revision: https://developer.blender.org/D6268 Reviewed by Campbell Barton
2019-11-20 12:59:19 -08:00
/* Space between lines, in relation to letter height. */
#define TXT_LINE_VPAD 0.3f
/* Space between lines. */
#define TXT_LINE_SPACING(st) ((int)(TXT_LINE_VPAD * st->lheight_dpi))
/* Total height of each line. */
#define TXT_LINE_HEIGHT(st) ((int)((1.0f + TXT_LINE_VPAD) * st->lheight_dpi))
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
ClangFormat: apply to source, most of intern Apply clang format as proposed in T53211. For details on usage and instructions for migrating branches without conflicts, see: https://wiki.blender.org/wiki/Tools/ClangFormat
2019-04-17 06:17:24 +02:00
#define SUGG_LIST_SIZE 7
#define SUGG_LIST_WIDTH 20
#define DOC_WIDTH 40
#define DOC_HEIGHT 10
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
ClangFormat: apply to source, most of intern Apply clang format as proposed in T53211. For details on usage and instructions for migrating branches without conflicts, see: https://wiki.blender.org/wiki/Tools/ClangFormat
2019-04-17 06:17:24 +02:00
#define TOOL_SUGG_LIST 0x01
#define TOOL_DOCUMENT 0x02
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
Text Editor: store font id in a drawing context
2015-12-01 15:31:42 +11:00
int wrap_width(const struct SpaceText *st, struct ARegion *ar);
ClangFormat: apply to source, most of intern Apply clang format as proposed in T53211. For details on usage and instructions for migrating branches without conflicts, see: https://wiki.blender.org/wiki/Tools/ClangFormat
2019-04-17 06:17:24 +02:00
void wrap_offset(const struct SpaceText *st,
struct ARegion *ar,
struct TextLine *linein,
int cursin,
int *offl,
int *offc);
void wrap_offset_in_line(const struct SpaceText *st,
struct ARegion *ar,
struct TextLine *linep,
int cursin,
int *offl,
int *offc);
Text Editor: store font id in a drawing context
2015-12-01 15:31:42 +11:00
int text_get_char_pos(const struct SpaceText *st, const char *line, int cur);
Text space ========== Main changes: - lines could be partially shown when they starts somewhere behind the upper boundary of area but because of word-wrapping some part of line will be show - fixed caret navigatiog in area when tabs aren't replaced by spaces - highlight the whole current line not only it's wrapped segment with caret - when you're in replace mode cursor would be as long as the tab's width if it's under tab symbol This fixes: #22399: Text Editor: word-wrapped lines prevent navigating through text with up-arrow. #21163: Text editor scrollbar problem with word wrap
2010-10-13 06:06:39 +00:00
void text_drawcache_tag_update(struct SpaceText *st, int full);
void text_free_caches(struct SpaceText *st);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
int text_do_suggest_select(struct SpaceText *st, struct ARegion *ar);
- added GCC warning -Wstrict-prototypes - fixed bug in paste material, exposed by stricter warnings. - removed/renamed various shadowed vars. - removed BGE lamp.colour, only allow lamp.color attribute.
2010-12-03 12:30:59 +00:00
void text_pop_suggest_list(void);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
Text Editor: store font id in a drawing context
2015-12-01 15:31:42 +11:00
int text_get_visible_lines(const struct SpaceText *st, struct ARegion *ar, const char *str);
ClangFormat: apply to source, most of intern Apply clang format as proposed in T53211. For details on usage and instructions for migrating branches without conflicts, see: https://wiki.blender.org/wiki/Tools/ClangFormat
2019-04-17 06:17:24 +02:00
int text_get_span_wrap(const struct SpaceText *st,
struct ARegion *ar,
struct TextLine *from,
struct TextLine *to);
Text space ========== Main changes: - lines could be partially shown when they starts somewhere behind the upper boundary of area but because of word-wrapping some part of line will be show - fixed caret navigatiog in area when tabs aren't replaced by spaces - highlight the whole current line not only it's wrapped segment with caret - when you're in replace mode cursor would be as long as the tab's width if it's under tab symbol This fixes: #22399: Text Editor: word-wrapped lines prevent navigating through text with up-arrow. #21163: Text editor scrollbar problem with word wrap
2010-10-13 06:06:39 +00:00
int text_get_total_lines(struct SpaceText *st, struct ARegion *ar);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
/* text_ops.c */
ClangFormat: apply to source, most of intern Apply clang format as proposed in T53211. For details on usage and instructions for migrating branches without conflicts, see: https://wiki.blender.org/wiki/Tools/ClangFormat
2019-04-17 06:17:24 +02:00
enum {
LINE_BEGIN,
LINE_END,
FILE_TOP,
FILE_BOTTOM,
PREV_CHAR,
NEXT_CHAR,
PREV_WORD,
NEXT_WORD,
PREV_LINE,
NEXT_LINE,
PREV_PAGE,
NEXT_PAGE
};
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
enum { DEL_NEXT_CHAR, DEL_PREV_CHAR, DEL_NEXT_WORD, DEL_PREV_WORD };
void TEXT_OT_new(struct wmOperatorType *ot);
void TEXT_OT_open(struct wmOperatorType *ot);
void TEXT_OT_reload(struct wmOperatorType *ot);
UI * Headers and menus can now be created in python. * Replaced the uiMenuItem functions to create menus with equivalent uiItem functions using a layout, removing duplicated code. * More uiItem functions are now exposed to python. * The text editor header, panels and one of its menus are now created in space_text.py. * Buttons window data context icon new changes depending on active object. Issues * Icons are not wrapped yet, hardcoded ints at the moment. * The ID browse template is unfinished.
2009-04-22 18:39:44 +00:00
void TEXT_OT_unlink(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_save(struct wmOperatorType *ot);
void TEXT_OT_save_as(struct wmOperatorType *ot);
void TEXT_OT_make_internal(struct wmOperatorType *ot);
void TEXT_OT_run_script(struct wmOperatorType *ot);
void TEXT_OT_refresh_pyconstraints(struct wmOperatorType *ot);
void TEXT_OT_paste(struct wmOperatorType *ot);
void TEXT_OT_copy(struct wmOperatorType *ot);
void TEXT_OT_cut(struct wmOperatorType *ot);
patch [#30821] Wiki Quick Hack: Text editor duplicate line from Justin Dailey (dail) made this Ctrl+D, to replace Delete.
2012-04-29 18:53:43 +00:00
void TEXT_OT_duplicate_line(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_convert_whitespace(struct wmOperatorType *ot);
Text: merge toggle comments into a single operator This allows users to map comment/un-comment to be mapped to keys.
2019-08-05 13:54:27 +10:00
void TEXT_OT_comment_toggle(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_unindent(struct wmOperatorType *ot);
void TEXT_OT_indent(struct wmOperatorType *ot);
void TEXT_OT_line_break(struct wmOperatorType *ot);
void TEXT_OT_insert(struct wmOperatorType *ot);
void TEXT_OT_select_line(struct wmOperatorType *ot);
void TEXT_OT_select_all(struct wmOperatorType *ot);
One more small text space usability: select work by double-click on it - Change cursor changing from mouse press to mouse click. A bit "delayed" UI feedback, but otherwise we'll be unable to use double-click events here - Change clinebacks to callbacks in comment for select_line operator. Or it was supposed to be clinebacks?
2011-02-17 19:26:59 +00:00
void TEXT_OT_select_word(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
make text move up/down into a single operator with a direction property
2012-05-04 16:17:09 +00:00
void TEXT_OT_move_lines(struct wmOperatorType *ot);
Patch [#30654] Wiki Quick Hack: Text editor move lines up/down Submitted by: Justin Dailey (dail) Patch allows the current line (or selected lines) to be moved up and down with Ctrl+Shift+Up and Ctrl+Shift+Down. Has undo/redo support and operators in python menu.
2012-05-04 14:27:13 +00:00
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_jump(struct wmOperatorType *ot);
void TEXT_OT_move(struct wmOperatorType *ot);
void TEXT_OT_move_select(struct wmOperatorType *ot);
void TEXT_OT_delete(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void TEXT_OT_overwrite_toggle(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_scroll(struct wmOperatorType *ot);
void TEXT_OT_scroll_bar(struct wmOperatorType *ot);
Split cursor_set into two operators: - cursor_set which just sets cursor position immediatelly - selection_set which could be used to select block of text Now there're could be operators binded to mouse double-click event
2011-02-17 18:55:17 +00:00
void TEXT_OT_selection_set(struct wmOperatorType *ot);
- use clear, set, add, enable, disable and toggle as a prefix in operator names - use select as a suffix eg UV_OT_loop_select -> UV_OT_select_loop - Each select all operator was using slightly different wording... select_all, deselect_all, de_select_all, select_de_select_all -> select_all_toggle - selection -> select - POSE_OT_select_connected -> POSE_OT_select_linked to match other operators - NODE_OT_delete_selection -> NODE_OT_delete since its not used in other operators - ANIM_OT_previewrange_define -> ANIM_OT_previewrange_set to match other operators - NODE_OT_fit_all -> NODE_OT_view_all to match other operators - View2D_OT_* -> VIEW2D_OT_* to match VIEW3D - View2D_OT_view_downscroll -> VIEW2D_OT_scroll_down more logical - removed MARKER_OT_mouseselect_extend and made extend a boolean property of MARKER_OT_mouseselect - MARKER_OT_mouseselect -> MARKER_OT_select - GROUP_OT_group_remove -> GROUP_OT_objects_remove more logical since its removing objects from groups - MESH_OT_removedoublesflag -> MESH_OT_remove_doubles - redundant words MESH_OT_split_mesh -> MESH_OT_split, OBJECT_OT_object_delete -> OBJECT_OT_delete renamed selection operator properties extend_select -> extend column_select -> column select_children_only -> children_only ... Since these are all in the context of selection operators there is no need for the extra 'select' in the property name. Updated docs http://www.graphicall.org/ftp/ideasman42/html/bpyoperator-module.html
2009-03-29 02:15:13 +00:00
void TEXT_OT_cursor_set(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_line_number(struct wmOperatorType *ot);
Usablity: In text editor, the CTRL+F find now opens property region (or keeps it) and activates the search button for input. That's already nice! But next step should be to do a search on exit of the button (or while typing). That's stuff I need Campbell to help with though. Notes: - Probably Py api for property buttons could get an "operator=" arg? - The warning menu "not found" should go away - I also suggest to make "wrap" search default for new editors
2013-03-24 13:43:40 +00:00
/* find = find indicated text */
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_find(struct wmOperatorType *ot);
void TEXT_OT_find_set_selected(struct wmOperatorType *ot);
void TEXT_OT_replace(struct wmOperatorType *ot);
void TEXT_OT_replace_set_selected(struct wmOperatorType *ot);
Usablity: In text editor, the CTRL+F find now opens property region (or keeps it) and activates the search button for input. That's already nice! But next step should be to do a search on exit of the button (or while typing). That's stuff I need Campbell to help with though. Notes: - Probably Py api for property buttons could get an "operator=" arg? - The warning menu "not found" should go away - I also suggest to make "wrap" search default for new editors
2013-03-24 13:43:40 +00:00
/* text_find = open properties, activate search button */
void TEXT_OT_start_find(struct wmOperatorType *ot);
2.5: Text Editor back. There was very little structure in this code, using many globals and duplicated code. Now it should be better structured. Most things should work, the main parts that are not back yet are the python plugins and markers. Notes: * Blenfont is used for drawing the text, nicely anti-aliased. * A monospace truetype font was added, since that is needed for the text editor. It's Bitstream Vera Sans Mono. This is the default gnome terminal font, but it doesn't fit entirely well with the other font I think, can be changed easily of course. * Clipboard copy/cut/paste now always uses the system clipboard, the code for the own cut buffer was removed. * The interface buttons should support copy/cut/paste again now as well. * WM_clipboard_text_get/WM_clipboard_text_set were added to the windowmanager code. * Find panel is now a kind of second header, instead of a panel. This needs especially a way to start editing the text field immediately on open still. * Operators are independent of the actual space when possible, was a bit of puzzling but got it solved nice with notifiers, and some lazy init for syntax highlight in the drawing code. * RNA was created for the text editor space and used for buttons. * Operators: * New, Open, Reload, Save, Save As, Make Internal * Run Script, Refresh Pyconstraints * Copy, Cut, Paste * Convert Whitespace, Uncomment, Comment, Indent, Unindent * Line Break, Insert * Next Marker, Previous Marker, Clear All Markers, Mark All * Select Line, Select All * Jump, Move, Move Select, Delete, Toggle Overwrite * Scroll, Scroll Bar, Set Cursor, Line Number * Find and Replace, Find, Replace, Find Set Selected, Replace Set Selected * To 3D Object * Resolve Conflict
2009-02-28 23:33:35 +00:00
void TEXT_OT_to_3d_object(struct wmOperatorType *ot);
void TEXT_OT_resolve_conflict(struct wmOperatorType *ot);
2.5 Basics for the remaining 6 spacetypes. Note: Andrea prefers to merge SpaceImaSel with SpaceFile for that I'll provide a good readfile.c patch later
2008-12-14 14:43:08 +00:00
Cleanup: use bool for poll functions
2018-07-02 11:47:00 +02:00
bool text_space_edit_poll(struct bContext *C);
text autocomplete - make the popup box line up the X axis with the current word. - add poll function for the operator
2012-12-31 16:24:49 +00:00
/* text_autocomplete.c */
add back initial autocomplete support. - This doesnt use python as 2.4x did, instead it just autocompletes based on the text files unique identifiers so its useful for any language. - key is same as console (Ctrl+Space)
2012-12-31 15:11:36 +00:00
void TEXT_OT_autocomplete(struct wmOperatorType *ot);
moving dir strings into global namespace for doc access (coming up)
2011-02-15 14:38:43 +00:00
/* space_text.c */
extern const char *text_context_dir[]; /* doc access */
unify include guard defines, __$FILENAME__ without the underscores these clogged up the namespace for autocompleation which was annoying.
2012-02-17 18:59:41 +00:00
#endif /* __TEXT_INTERN_H__ */
Copy Permalink