This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
blender-archive/source/blender/blenkernel/BKE_effect.h

141 lines
4.4 KiB
C++
Raw Normal View History

/*
* ***** BEGIN GPL LICENSE BLOCK *****
2002-10-12 11:37:38 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
2002-10-12 11:37:38 +00:00
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
2010-02-12 13:34:04 +00:00
* Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2002-10-12 11:37:38 +00:00
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* The Original Code is: all of this file.
*
* Contributor(s): none yet.
*
* ***** END GPL LICENSE BLOCK *****
2002-10-12 11:37:38 +00:00
*/
#ifndef __BKE_EFFECT_H__
#define __BKE_EFFECT_H__
2002-10-12 11:37:38 +00:00
/** \file BKE_effect.h
* \ingroup bke
* \since March 2001
* \author nzc
*/
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
#include "DNA_modifier_types.h"
struct Object;
struct Scene;
2002-10-12 11:37:38 +00:00
struct Effect;
struct ListBase;
struct Particle;
Orange branch: Revived hidden treasure, the Groups! Previous experiment (in 2000) didn't satisfy, it had even some primitive NLA option in groups... so, cleaned up the old code (removed most) and integrated it back in a more useful way. Usage: - CTRL+G gives menu to add group, add to existing group, or remove from groups. - In Object buttons, a new (should become first) Panel was added, showing not only Object "ID button" and Parent, but also the Groups the Object Belongs to. These buttons also allow rename, assigning or removing. - To indicate Objects are grouped, they're drawn in a (not theme yet, so temporal?) green wire color. - Use ALT+SHIFT mouse-select to (de)select an entire group But, the real power of groups is in the following features: -> Particle Force field and Guide control In the "Particle Motion" Panel, you can indicate a Group name, this then limits force fields or guides to members of that Group. (Note that layers still work on top of that... not sure about that). -> Light Groups In the Material "Shaders" Panel, you can indicate a Group name to limit lighting for the Material to lamps in this group. The Lights in a Group do need to be 'visible' for the Scene to be rendered (as usual). -> Group Duplicator In the Object "Anim" Panel, you can set any Object (use Empty!) to duplicate an entire Group. It will make copies of all Objects in that Group. Also works for animated Objects, but it will copy the current positions or deforms. Control over 'local timing' (so we can do Massive anims!) will be added later. (Note; this commit won't render Group duplicators yet, a fix in bf-blender will enable that, next commit will sync) -> Library Appending In the SHIFT-F1 or SHIFT+F4 browsers, you can also find the Groups listed. By appending or linking the Group itself, and use the Group Duplicator, you now can animate and position linked Objects. The nice thing is that the local saved file itself will only store the Group name that was linked, so on a next file read, the Group Objects will be re-read as stored (changed) in the Library file. (Note; current implementation also "gives a base" to linked Group Objects, to show them as Objects in the current Scene. Need that now for testing purposes, but probably will be removed later). -> Outliner Outliner now shows Groups as optio too, nice to organize your data a bit too! In General, Groups have a very good potential... for example, it could become default for MetaBall Objects too (jiri, I can help you later on how this works). All current 'layer relationships' in Blender should be dropped in time, I guess...
2005-12-06 10:55:30 +00:00
struct Group;
struct RNG;
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
struct ParticleSimulationData;
struct ParticleData;
struct ParticleKey;
2002-10-12 11:37:38 +00:00
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
struct EffectorWeights *BKE_add_effector_weights(struct Group *group);
struct PartDeflect *object_add_collision_fields(int type);
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
/* Input to effector code */
typedef struct EffectedPoint {
float *loc;
float *vel;
float *ave; /* angular velocity for particles with dynamic rotation */
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
float *rot; /* rotation quaternion for particles with dynamic rotation */
float vel_to_frame;
float vel_to_sec;
/* only for particles */
float size, charge;
unsigned int flag;
int index;
struct ParticleSystem *psys; /* particle system the point belongs to */
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
} EffectedPoint;
typedef struct GuideEffectorData {
float vec_to_point[3];
float strength;
} GuideEffectorData;
typedef struct EffectorData {
/* Effector point */
float loc[3];
float nor[3];
float vel[3];
float vec_to_point[3];
float distance, falloff;
/* only for effector particles */
float size, charge;
/* only for vortex effector with surface falloff */
float nor2[3], vec_to_point2[3];
int *index; /* point index */
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
} EffectorData;
/* used for calculating the effector force */
typedef struct EffectorCache {
struct EffectorCache *next, *prev;
struct Scene *scene;
struct Object *ob;
struct ParticleSystem *psys;
struct SurfaceModifierData *surmd;
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
struct PartDeflect *pd;
/* precalculated for guides */
struct GuideEffectorData *guide_data;
float guide_loc[4], guide_dir[3], guide_radius;
float velocity[3];
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
float frame;
int flag;
} EffectorCache;
void free_partdeflect(struct PartDeflect *pd);
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
struct ListBase *pdInitEffectors(struct Scene *scene, struct Object *ob_src, struct ParticleSystem *psys_src, struct EffectorWeights *weights);
void pdEndEffectors(struct ListBase **effectors);
void pdDoEffectors(struct ListBase *effectors, struct ListBase *colliders, struct EffectorWeights *weights, struct EffectedPoint *point, float *force, float *impulse);
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
void pd_point_from_particle(struct ParticleSimulationData *sim, struct ParticleData *pa, struct ParticleKey *state, struct EffectedPoint *point);
void pd_point_from_loc(struct Scene *scene, float *loc, float *vel, int index, struct EffectedPoint *point);
void pd_point_from_soft(struct Scene *scene, float *loc, float *vel, int index, struct EffectedPoint *point);
/* needed for boids */
float effector_falloff(struct EffectorCache *eff, struct EffectorData *efd, struct EffectedPoint *point, struct EffectorWeights *weights);
int closest_point_on_surface(SurfaceModifierData * surmd, const float co[3], float surface_co[3], float surface_nor[3], float surface_vel[3]);
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
int get_effector_data(struct EffectorCache *eff, struct EffectorData *efd, struct EffectedPoint *point, int real_velocity);
/* required for particle_system.c */
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
//void do_physical_effector(struct EffectorData *eff, struct EffectorPoint *point, float *total_force);
//float effector_falloff(struct EffectorData *eff, struct EffectorPoint *point, struct EffectorWeights *weights);
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
/* EffectedPoint->flag */
#define PE_WIND_AS_SPEED 1
#define PE_DYNAMIC_ROTATION 2
#define PE_USE_NORMAL_DATA 4
Unified effector functionality for particles, cloth and softbody * Unified scene wide gravity (currently in scene buttons) instead of each simulation having it's own gravity. * Weight parameters for all effectors and an effector group setting. * Every effector can use noise. * Most effectors have "shapes" point, plane, surface, every point. - "Point" is most like the old effectors and uses the effector location as the effector point. - "Plane" uses the closest point on effectors local xy-plane as the effector point. - "Surface" uses the closest point on an effector object's surface as the effector point. - "Every Point" uses every point in a mesh effector object as an effector point. - The falloff is calculated from this point, so for example with "surface" shape and "use only negative z axis" it's possible to apply force only "inside" the effector object. * Spherical effector is now renamed as "force" as it's no longer just spherical. * New effector parameter "flow", which makes the effector act as surrounding air velocity, so the resulting force is proportional to the velocity difference of the point and "air velocity". For example a wind field with flow=1.0 results in proper non-accelerating wind. * New effector fields "turbulence", which creates nice random flow paths, and "drag", which slows the points down. * Much improved vortex field. * Effectors can now effect particle rotation as well as location. * Use full, or only positive/negative z-axis to apply force (note. the z-axis is the surface normal in the case of effector shape "surface") * New "force field" submenu in add menu, which adds an empty with the chosen effector (curve object for corve guides). * Other dynamics should be quite easy to add to the effector system too if wanted. * "Unified" doesn't mean that force fields give the exact same results for particles, softbody & cloth, since their final effect depends on many external factors, like for example the surface area of the effected faces. Code changes * Subversion bump for correct handling of global gravity. * Separate ui py file for common dynamics stuff. * Particle settings updating is flushed with it's id through DAG_id_flush_update(..). Known issues * Curve guides don't yet have all ui buttons in place, but they should work none the less. * Hair dynamics don't yet respect force fields. Other changes * Particle emission defaults now to frames 1-200 with life of 50 frames to fill the whole default timeline. * Many particles drawing related crashes fixed. * Sometimes particles didn't update on first frame properly. * Hair with object/group visualization didn't work properly. * Memory leaks with PointCacheID lists (Genscher, remember to free pidlists after use :).
2009-09-30 22:10:14 +00:00
/* EffectorData->flag */
#define PE_VELOCITY_TO_IMPULSE 1
2002-10-12 11:37:38 +00:00
#endif