archive/blender-archive
Archived
1
1
Fork 0
Code Pull Requests Packages Activity
This repository has been archived on 2023-10-09. You can view files and clone it, but cannot push or open issues or pull requests.
Files
f5ec29023dcad11a7b4ced3d52d69d21b443ce02
blender-archive/source/blender/modifiers/CMakeLists.txt

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

214 lines
4.8 KiB
CMake
Raw Normal View History

[#14437] Modifier Stack Refactor patch by Ben Batt (artificer) Updated patch for 6 or so modifiers added since the patch was written. - tested with CMake and SCons - fixed one error were flags were being added to the fluids type. - remove BKE_simple_deform.h, simple_deform.c, move functions into MOD_simpledeform.c since there were problems with circular deps. - moved some fluid and boolean functions used by modifiers too.
2010-04-11 22:12:30 +00:00
# ***** BEGIN GPL LICENSE BLOCK *****
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
update gpl header in cmake files
2012-02-11 04:05:00 +00:00
# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
[#14437] Modifier Stack Refactor patch by Ben Batt (artificer) Updated patch for 6 or so modifiers added since the patch was written. - tested with CMake and SCons - fixed one error were flags were being added to the fluids type. - remove BKE_simple_deform.h, simple_deform.c, move functions into MOD_simpledeform.c since there were problems with circular deps. - moved some fluid and boolean functions used by modifiers too.
2010-04-11 22:12:30 +00:00
#
# The Original Code is Copyright (C) 2006, Blender Foundation
# All rights reserved.
# ***** END GPL LICENSE BLOCK *****
Cleanup: trailing space for modifiers
2018-06-17 17:04:27 +02:00
set(INC
cmake source definitions: remove missing includes and use more strict formatting.
2011-07-16 23:01:14 +00:00
.
cmake: cleanup include paths, some duplicates and going up some unneeded dirs.
2011-07-17 09:11:13 +00:00
intern
Cleanup: sort CMake include paths
2019-04-24 14:39:31 +10:00
../blenfont
cmake: cleanup include paths, some duplicates and going up some unneeded dirs.
2011-07-17 09:11:13 +00:00
../blenkernel
[#14437] Modifier Stack Refactor patch by Ben Batt (artificer) Updated patch for 6 or so modifiers added since the patch was written. - tested with CMake and SCons - fixed one error were flags were being added to the fluids type. - remove BKE_simple_deform.h, simple_deform.c, move functions into MOD_simpledeform.c since there were problems with circular deps. - moved some fluid and boolean functions used by modifiers too.
2010-04-11 22:12:30 +00:00
../blenlib
Refactor: use new blenloader api for laplacian deform modifier
2020-06-15 18:37:30 +02:00
../blenloader
Cleanup: sort header, cmake paths
2020-07-14 16:04:18 +10:00
../blentranslation
Cleanup: sort CMake include paths
2019-04-24 14:39:31 +10:00
../bmesh
Depsgraph: New dependency graph integration commit This commit integrates the work done so far on the new dependency graph system, where goal was to replace legacy depsgraph with the new one, supporting loads of neat features like: - More granular dependency relation nature, which solves issues with fake cycles in the dependencies. - Move towards all-animatable, by better integration of drivers into the system. - Lay down some basis for upcoming copy-on-write, overrides and so on. The new system is living side-by-side with the previous one and disabled by default, so nothing will become suddenly broken. The way to enable new depsgraph is to pass `--new-depsgraph` command line argument. It's a bit early to consider the system production-ready, there are some TODOs and issues were discovered during the merge period, they'll be addressed ASAP. But it's important to merge, because it's the only way to attract artists to really start testing this system. There are number of assorted documents related on the design of the new system: * http://wiki.blender.org/index.php/User:Aligorith/GSoC2013_Depsgraph#Design_Documents * http://wiki.blender.org/index.php/User:Nazg-gul/DependencyGraph There are also some user-related information online: * http://code.blender.org/2015/02/blender-dependency-graph-branch-for-users/ * http://code.blender.org/2015/03/more-dependency-graph-tricks/ Kudos to everyone who was involved into the project: - Joshua "Aligorith" Leung -- design specification, initial code - Lukas "lukas_t" Toenne -- integrating code into blender, with further fixes - Sergey "Sergey" "Sharybin" -- some mocking around, trying to wrap up the project and so - Bassam "slikdigit" Kurdali -- stressing the new system, reporting all the issues and recording/writing documentation. - Everyone else who i forgot to mention here :)
2015-05-12 15:05:57 +05:00
../depsgraph
UI: Drag and Drop Modifiers, Layout Updates This patch implements the list panel system D7490 for modifiers. It also moves modifier drawing to a callback in ModifierTypeInfo in line with the extensible architecture refactoring goal T75724. This adds a PanelRegister callback and utilities for registering panels and subpanels. It also adds the callbacks for expansion saving and drag and drop reordering described in D7490. These utilities, callbacks, and other common UI elements shared between modifiers live in MOD_ui_common.c. Because modifier buttons are now in panels, we can make use of subpanels for organization. The UI layouts also use the single column layout style consistently used elsewhere in Blender. Additionally, the mode-setting buttons are aligned and ordered consistently with the outliner. However, the large number of UI changes in this patch may mean that additional polishing is required in master. Thanks to William Reynish (@billreynish) who did a fair amount of the layout work and to Julian Eisel (@Severin) for consistent help. Differential Revision: https://developer.blender.org/D7498
2020-06-05 10:41:03 -04:00
../editors/include
Geometry Nodes: initial scattering and geometry nodes This is the initial merge from the geometry-nodes branch. Nodes: * Attribute Math * Boolean * Edge Split * Float Compare * Object Info * Point Distribute * Point Instance * Random Attribute * Random Float * Subdivision Surface * Transform * Triangulate It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier. Notes on the Generic attribute access API The API adds an indirection for attribute access. That has the following benefits: * Most code does not have to care about how an attribute is stored internally. This is mainly necessary, because we have to deal with "legacy" attributes such as vertex weights and attributes that are embedded into other structs such as vertex positions. * When reading from an attribute, we generally don't care what domain the attribute is stored on. So we want to abstract away the interpolation that that adapts attributes from one domain to another domain (this is not actually implemented yet). Other possible improvements for later iterations include: * Actually implement interpolation between domains. * Don't use inheritance for the different attribute types. A single class for read access and one for write access might be enough, because we know all the ways in which attributes are stored internally. We don't want more different internal structures in the future. On the contrary, ideally we can consolidate the different storage formats in the future to reduce the need for this indirection. * Remove the need for heap allocations when creating attribute accessors. It includes commits from: * Dalai Felinto * Hans Goudey * Jacques Lucke * Léo Depoix
2020-12-02 13:25:25 +01:00
../functions
[#14437] Modifier Stack Refactor patch by Ben Batt (artificer) Updated patch for 6 or so modifiers added since the patch was written. - tested with CMake and SCons - fixed one error were flags were being added to the fluids type. - remove BKE_simple_deform.h, simple_deform.c, move functions into MOD_simpledeform.c since there were problems with circular deps. - moved some fluid and boolean functions used by modifiers too.
2010-04-11 22:12:30 +00:00
../makesdna
Merged the particles-2010 branch with node improvements into trunk. This branch adds mostly organizational improvements to the node system by renaming the node folders and files. A couple of internal features have been added too. Detailed information can be found on the wiki page: http://wiki.blender.org/index.php/User:Phonybone/Particles2010
2011-09-05 21:01:50 +00:00
../makesrna
Geometry Nodes: initial scattering and geometry nodes This is the initial merge from the geometry-nodes branch. Nodes: * Attribute Math * Boolean * Edge Split * Float Compare * Object Info * Point Distribute * Point Instance * Random Attribute * Random Float * Subdivision Surface * Transform * Triangulate It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier. Notes on the Generic attribute access API The API adds an indirection for attribute access. That has the following benefits: * Most code does not have to care about how an attribute is stored internally. This is mainly necessary, because we have to deal with "legacy" attributes such as vertex weights and attributes that are embedded into other structs such as vertex positions. * When reading from an attribute, we generally don't care what domain the attribute is stored on. So we want to abstract away the interpolation that that adapts attributes from one domain to another domain (this is not actually implemented yet). Other possible improvements for later iterations include: * Actually implement interpolation between domains. * Don't use inheritance for the different attribute types. A single class for read access and one for write access might be enough, because we know all the ways in which attributes are stored internally. We don't want more different internal structures in the future. On the contrary, ideally we can consolidate the different storage formats in the future to reduce the need for this indirection. * Remove the need for heap allocations when creating attribute accessors. It includes commits from: * Dalai Felinto * Hans Goudey * Jacques Lucke * Léo Depoix
2020-12-02 13:25:25 +01:00
../nodes
Cleanup: Render Module: move header files to main directory Move headers files from `render/extern/` to `render/` Part of T73586
2020-11-06 10:10:18 -05:00
../render
UI: Drag and Drop Modifiers, Layout Updates This patch implements the list panel system D7490 for modifiers. It also moves modifier drawing to a callback in ModifierTypeInfo in line with the extensible architecture refactoring goal T75724. This adds a PanelRegister callback and utilities for registering panels and subpanels. It also adds the callbacks for expansion saving and drag and drop reordering described in D7490. These utilities, callbacks, and other common UI elements shared between modifiers live in MOD_ui_common.c. Because modifier buttons are now in panels, we can make use of subpanels for organization. The UI layouts also use the single column layout style consistently used elsewhere in Blender. Additionally, the mode-setting buttons are aligned and ordered consistently with the outliner. However, the large number of UI changes in this patch may mean that additional polishing is required in master. Thanks to William Reynish (@billreynish) who did a fair amount of the layout work and to Julian Eisel (@Severin) for consistent help. Differential Revision: https://developer.blender.org/D7498
2020-06-05 10:41:03 -04:00
../windowmanager
Eigen: fold remaining OpenNL code into intern/eigen. Differential Revision: https://developer.blender.org/D1662
2015-11-24 20:42:10 +01:00
../../../intern/eigen
Cleanup: sort CMake include paths
2019-04-24 14:39:31 +10:00
../../../intern/guardedalloc
Refactor: use new blenloader api for laplacian deform modifier
2020-06-15 18:37:30 +02:00
# dna_type_offsets.h in BLO_read_write.h
${CMAKE_BINARY_DIR}/source/blender/makesdna/intern
cmake maintenance blender_add_lib now takes a separate include argument to suppress warnings in system includes (mostly ffmpeg & python). also only build wm_apple.c on apple+carbon configuration.
2011-05-31 01:15:44 +00:00
)
set(INC_SYS
use cmake defined names for jpeg, png, zlib and python libs, building on *nix with non-standard libjpeg/png/zlib locations was broken. in the case of python this makes it easier to move to find_package(PythonLibs) when 3.x is supported.
2011-01-25 14:43:13 +00:00
${ZLIB_INCLUDE_DIRS}
[#14437] Modifier Stack Refactor patch by Ben Batt (artificer) Updated patch for 6 or so modifiers added since the patch was written. - tested with CMake and SCons - fixed one error were flags were being added to the fluids type. - remove BKE_simple_deform.h, simple_deform.c, move functions into MOD_simpledeform.c since there were problems with circular deps. - moved some fluid and boolean functions used by modifiers too.
2010-04-11 22:12:30 +00:00
)
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
set(SRC
intern/MOD_armature.c
intern/MOD_array.c
intern/MOD_bevel.c
intern/MOD_boolean.c
intern/MOD_build.c
intern/MOD_cast.c
intern/MOD_cloth.c
intern/MOD_collision.c
Corrective Smooth Modifier (aka delta-mush) This modifier can be used to correct bad deformations, Original patch D1183 by @sazerac, with own modifications
2015-03-29 04:44:05 +11:00
intern/MOD_correctivesmooth.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_curve.c
Transfer data: add modifier. Not much to add, modifier uses same code as operator basically, only key difference is that modifier will never create data layers itself, you have to use dedicated operator for that.
2015-01-09 21:19:12 +01:00
intern/MOD_datatransfer.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_decimate.c
intern/MOD_displace.c
Applied Dynamic Paint 1.18f patch as a codebase for GSoC.
2011-05-24 07:08:58 +00:00
intern/MOD_dynamicpaint.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_edgesplit.c
intern/MOD_explode.c
Cleanup: sort file lists
2019-12-17 10:07:44 +11:00
intern/MOD_fluid.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_hook.c
Mesh Modifiers: Added Laplacian Deform Part of soc-2013-sketch_mesh branch See: http://wiki.blender.org/index.php/User:Apinzonf/Doc:2.6/Manual/Modifiers/Deform/Laplacian_Deform
2013-11-24 07:00:49 +11:00
intern/MOD_laplaciandeform.c
Merge GSoC project from branch: Laplacian Smooth (Operator & Modifier) by Alexander Pinzon Fernandez (apinzonf) Supported by Google Summer of Code 2012 Project Documentation: http://wiki.blender.org/index.php/User:Apinzonf Manual Page: http://wiki.blender.org/index.php/User:Apinzonf/Doc:2.6/Manual/Modifiers/Deform/Laplacian_Smooth
2012-10-24 10:39:11 +00:00
intern/MOD_laplaciansmooth.c
UV Warp Modifier: Based on patch [#30837] UV Offset Modifier by Pawel Kowal (pkowal) - Allows you to setup a transformation between objects to apply to UV coords. - Option to select which axis apply to U/V. - Option to select the UV center (needed for transformations that scale or rotate). - Uses from/to objects in a similar way to the Warp modifier. - Vertex group can be used to adjust influence.
2012-12-14 04:07:30 +00:00
intern/MOD_lattice.c
Modifiers: Refactor Mask modifier The functionality of the mask modifier remains unchanged. This patch updates the mask modifier so that it uses C++. The manual memory management has been replaced with proper containers. The large `applyModifier` function has been splitup into multiple smaller functions. A large speedup is achieved by using simple arrays instead of hash tables in multiple places. In my performance test file the playback speed increased from 1.1 to 5.1 fps on my laptop. Reviewers: campbellbarton, brecht Differential Revision: https://developer.blender.org/D6779
2020-02-20 10:05:47 +01:00
intern/MOD_mask.cc
Volumes: new Mesh to Volume modifier This modifier can only be added to Volume objects. It takes a mesh as input and generates a "density" grid near the surface or in the enclosed volume. Ref T73201. Reviewers: brecht Differential Revision: https://developer.blender.org/D9032
2020-09-29 16:02:40 +02:00
intern/MOD_mesh_to_volume.cc
mesh-cache deform modifier, supports MDD and PC2 formats. see wiki docs: http://wiki.blender.org/index.php/Doc:2.6/Manual/Modifiers/Deform/Mesh_Cache
2013-01-21 15:41:00 +00:00
intern/MOD_meshcache.c
intern/MOD_meshcache_mdd.c
intern/MOD_meshcache_pc2.c
add bullet define & include for scons makesrna, also move meshcache utils into own file.
2013-01-24 02:14:39 +00:00
intern/MOD_meshcache_util.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_meshdeform.c
Basic Alembic support All in all, this patch adds an Alembic importer, an Alembic exporter, and a new CacheFile data block which, for now, wraps around an Alembic archive. This data block is made available through a new modifier ("Mesh Sequence Cache") as well as a new constraint ("Transform Cache") to somewhat properly support respectively geometric and transformation data streaming from alembic caches. A more in-depth documentation is to be found on the wiki, as well as a guide to compile alembic: https://wiki.blender.org/index.php/ User:Kevindietrich/AlembicBasicIo. Many thanks to everyone involved in this little project, and huge shout out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the custom builds and compile fixes. Reviewers: sergey, campbellbarton, mont29 Reviewed By: sergey, campbellbarton, mont29 Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
intern/MOD_meshsequencecache.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_mirror.c
intern/MOD_multires.c
Cleanup: sort cmake file lists
2020-12-11 15:00:22 +11:00
intern/MOD_nodes.cc
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_none.c
Custom Loop Normals: Add NormalEdit modifier Nothing much to say here, basic tool to make normals point toward a target, or to make them point 'outward' as if object was a spheroid (useful for game bushes etc.). Also, forgot a big thank you to Campbell for the extensive review work he has done on this project!
2015-02-05 14:49:44 +01:00
intern/MOD_normal_edit.c
Ocean Sim modifier patch by Matt Ebb, Hamed Zaghaghi This adds a new Modifier "Ocean" to simulate large-scale wave motion. Details can be found in the wiki documentation [1], the project homepage [2] and the patch tracker [3] The modifier is disabled by default for now. To enable it, the WITH_OCEANSIM (cmake) / WITH_BF_OCEANSIM (scons) flags have to be set. The code depends on fftw3, so this also has to be enabled. [1] http://wiki.blender.org/index.php/Doc:2.6/Manual/Modifiers/Simulation/Ocean [2] http://www.savetheoceansim.com [3] http://projects.blender.org/tracker/?group_id=9&atid=127&func=detail&aid=28338
2011-11-13 12:17:27 +00:00
intern/MOD_ocean.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_particleinstance.c
intern/MOD_particlesystem.c
Add remesh modifier (dual contouring). This patch adds a new remeshing modifier. The algorithm is based on the paper "Dual Contouring of Hermite Data", and the implementation was contributed to Blender by Dr. Tao Ju. The contributed code is in intern/dualcon, and was modified to compile under gcc and work on 64-bit systems. Files not needed for Blender were removed and a small C wrapper was added in order to interface it with Blender. The rest of the patch is just standard modifier stuff. Reviewed by Sergey, code review link: http://codereview.appspot.com/5491053/ The remesh icon was contributed by Zafio: http://blenderartists.org/forum/showthread.php?240751-Request-for-modifier-icon/page2. Thanks to everyone in that thread for the icon proposals and discussion. Documentation and examples on the Blender wiki: http://wiki.blender.org/index.php/User:Nicholasbishop/RemeshModifier In case the history is needed for anything, check the remesh-modifier branch of this git repository: https://gitorious.org/~nicholasbishop/blenderprojects/nicholasbishop-blender
2011-12-30 21:11:40 +00:00
intern/MOD_remesh.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_screw.c
intern/MOD_shapekey.c
intern/MOD_shrinkwrap.c
intern/MOD_simpledeform.c
Add skin modifier: DNA, RNA, UI, and MOD_skin.c implementation. Skin modifier documentation: http://wiki.blender.org/index.php/User:Nicholasbishop/SkinModifier Implementation based in part off the paper "B-Mesh: A Fast Modeling System for Base Meshes of 3D Articulated Shapes" (Zhongping Ji, Ligang Liu, Yigang Wang) Note that to avoid confusion with Blender's BMesh data structure, this tool is renamed as the Skin modifier. The B-Mesh paper is current available here: http://www.math.zju.edu.cn/ligangliu/CAGD/Projects/BMesh/ The main missing features in this code compared to the paper are: * No mesh evolution. The paper suggests iteratively subsurfing the skin output and adapting the output to better conform with the spheres of influence surrounding each vertex. * No mesh fairing. The paper suggests re-aligning output edges to follow principal mesh curvatures. * No auxiliary balls. These would serve to influence mesh evolution, which as noted above is not implemented. The code also adds some features not present in the paper: * Loops in the input edge graph. * Concave surfaces around branch nodes. The paper does not discuss how to handle non-convex regions; this code adds a number of cleanup operations to handle many (though not all) of these cases.
2012-05-22 15:29:01 +00:00
intern/MOD_skin.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_smooth.c
intern/MOD_softbody.c
intern/MOD_solidify.c
Solidify Modifier: support non-manifold input This adds a new mode to solidify to support non-manifold geometry with edges using 3 or more faces as input, resulting in a manifold mesh. Since the differences between these methods don't translate well into short terms, they're named "Simple" and "Complex" in the UI. This also adds clamp with respect to angles to the existing solidify modifier calculation.
2019-11-03 14:24:24 +11:00
intern/MOD_solidify_extrude.c
intern/MOD_solidify_nonmanifold.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_subsurf.c
intern/MOD_surface.c
Surface Deform Modifier (SDef) Implementation of the SDef modifier, which allows meshes to be bound by surface, thus allowing things such as cloth simulation proxies. User documentation: https://wiki.blender.org/index.php/User:Lucarood/SurfaceDeform Reviewers: mont29, sergey Subscribers: Severin, dfelinto, plasmasolutions, kjym3 Differential Revision: https://developer.blender.org/D2462
2017-02-27 12:39:14 -03:00
intern/MOD_surfacedeform.c
UV Warp Modifier: Based on patch [#30837] UV Offset Modifier by Pawel Kowal (pkowal) - Allows you to setup a transformation between objects to apply to UV coords. - Option to select which axis apply to U/V. - Option to select the UV center (needed for transformations that scale or rotate). - Uses from/to objects in a similar way to the Warp modifier. - Vertex group can be used to adjust influence.
2012-12-14 04:07:30 +00:00
intern/MOD_triangulate.c
UI: Drag and Drop Modifiers, Layout Updates This patch implements the list panel system D7490 for modifiers. It also moves modifier drawing to a callback in ModifierTypeInfo in line with the extensible architecture refactoring goal T75724. This adds a PanelRegister callback and utilities for registering panels and subpanels. It also adds the callbacks for expansion saving and drag and drop reordering described in D7490. These utilities, callbacks, and other common UI elements shared between modifiers live in MOD_ui_common.c. Because modifier buttons are now in panels, we can make use of subpanels for organization. The UI layouts also use the single column layout style consistently used elsewhere in Blender. Additionally, the mode-setting buttons are aligned and ordered consistently with the outliner. However, the large number of UI changes in this patch may mean that additional polishing is required in master. Thanks to William Reynish (@billreynish) who did a fair amount of the layout work and to Julian Eisel (@Severin) for consistent help. Differential Revision: https://developer.blender.org/D7498
2020-06-05 10:41:03 -04:00
intern/MOD_ui_common.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_util.c
intern/MOD_uvproject.c
Cleanup: sort cmake file lists
2019-01-25 08:30:33 +11:00
intern/MOD_uvwarp.c
Volumes: new Volume Displace modifier This modifier uses a 3D texture to displace a volume. For now, this can only use the previously existing texture system, because we do not have a better alternative yet. Still, the results can be quite good and interesting. See D9075 for some examples. Reviewers: brecht, simonthommes Differential Revision: https://developer.blender.org/D9075
2020-10-07 18:03:07 +02:00
intern/MOD_volume_displace.cc
Volumes: new Volume to Mesh modifier This modifier is the opposite of the recently added Mesh to Volume modifier. It converts the "surface" of a volume into a mesh. The "surface" is defined by a threshold value. All voxels with a density higher than the threshold are considered to be inside the volume, while all others will be outside. By default, the resolution of the generated mesh depends on the voxel size of the volume grid. The resolution can be customized. It should be noted that a lower resolution might not make this modifier faster. This is because we have to downsample the openvdb grid, which isn't a cheap operation. Converting a mesh to a volume and then back to a mesh is possible, but it does require two separate mesh objects for now. Reviewers: brecht Differential Revision: https://developer.blender.org/D9141
2020-10-19 12:11:38 +02:00
intern/MOD_volume_to_mesh.cc
warp modifier, added in the render branch for durian. simple modifier, almost like a hook, except it can deform with 2 object source -> target, has option to preserve rotation and use different falloff types.
2011-05-01 15:16:59 +00:00
intern/MOD_warp.c
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
intern/MOD_wave.c
Applied soc-2017-normal-tools
2018-05-25 22:24:24 +05:30
intern/MOD_weighted_normal.c
Adding WeightVG modifiers code. Still some points to tweak, though. NOTE : Haven’t yet tested build with scons, will do asap (unless someone else does :) ).
2011-07-25 15:27:01 +00:00
intern/MOD_weightvg_util.c
intern/MOD_weightvgedit.c
intern/MOD_weightvgmix.c
intern/MOD_weightvgproximity.c
Modifier: New Weld Modifier Part of T70240 This is the initial implementation of Weld Modifier. New features will be added later. ToDo: - Seams: restrict welding to vertices along boundary edges. - Edge Collapse: collapse edges below the length threshold. - New icon. - Some customdata are not being correctly interpolated. Differential Revision: https://developer.blender.org/D6383
2019-12-11 22:31:20 -03:00
intern/MOD_weld.c
Modifier: New Wireframe Modifier Based on patch originally by Thomas Beck, uses options similar to solidify.
2013-12-22 07:08:35 +11:00
intern/MOD_wireframe.c
include headers in cmake source, added a script to check for consistency, reporting missing headers & C files. this is important so IDE's using CMake integration always get blender headers. - QtCreator & MSVC for eg, probably others too.
2010-11-29 04:35:56 +00:00
MOD_modifiertypes.h
Geometry Nodes: initial scattering and geometry nodes This is the initial merge from the geometry-nodes branch. Nodes: * Attribute Math * Boolean * Edge Split * Float Compare * Object Info * Point Distribute * Point Instance * Random Attribute * Random Float * Subdivision Surface * Transform * Triangulate It includes the initial evaluation of geometry node groups in the Geometry Nodes modifier. Notes on the Generic attribute access API The API adds an indirection for attribute access. That has the following benefits: * Most code does not have to care about how an attribute is stored internally. This is mainly necessary, because we have to deal with "legacy" attributes such as vertex weights and attributes that are embedded into other structs such as vertex positions. * When reading from an attribute, we generally don't care what domain the attribute is stored on. So we want to abstract away the interpolation that that adapts attributes from one domain to another domain (this is not actually implemented yet). Other possible improvements for later iterations include: * Actually implement interpolation between domains. * Don't use inheritance for the different attribute types. A single class for read access and one for write access might be enough, because we know all the ways in which attributes are stored internally. We don't want more different internal structures in the future. On the contrary, ideally we can consolidate the different storage formats in the future to reduce the need for this indirection. * Remove the need for heap allocations when creating attribute accessors. It includes commits from: * Dalai Felinto * Hans Goudey * Jacques Lucke * Léo Depoix
2020-12-02 13:25:25 +01:00
MOD_nodes.h
mesh-cache deform modifier, supports MDD and PC2 formats. see wiki docs: http://wiki.blender.org/index.php/Doc:2.6/Manual/Modifiers/Deform/Mesh_Cache
2013-01-21 15:41:00 +00:00
intern/MOD_meshcache_util.h
Solidify Modifier: support non-manifold input This adds a new mode to solidify to support non-manifold geometry with edges using 3 or more faces as input, resulting in a manifold mesh. Since the differences between these methods don't translate well into short terms, they're named "Simple" and "Complex" in the UI. This also adds clamp with respect to angles to the existing solidify modifier calculation.
2019-11-03 14:24:24 +11:00
intern/MOD_solidify_util.h
UI: Drag and Drop Modifiers, Layout Updates This patch implements the list panel system D7490 for modifiers. It also moves modifier drawing to a callback in ModifierTypeInfo in line with the extensible architecture refactoring goal T75724. This adds a PanelRegister callback and utilities for registering panels and subpanels. It also adds the callbacks for expansion saving and drag and drop reordering described in D7490. These utilities, callbacks, and other common UI elements shared between modifiers live in MOD_ui_common.c. Because modifier buttons are now in panels, we can make use of subpanels for organization. The UI layouts also use the single column layout style consistently used elsewhere in Blender. Additionally, the mode-setting buttons are aligned and ordered consistently with the outliner. However, the large number of UI changes in this patch may mean that additional polishing is required in master. Thanks to William Reynish (@billreynish) who did a fair amount of the layout work and to Julian Eisel (@Severin) for consistent help. Differential Revision: https://developer.blender.org/D7498
2020-06-05 10:41:03 -04:00
intern/MOD_ui_common.h
include headers in cmake source, added a script to check for consistency, reporting missing headers & C files. this is important so IDE's using CMake integration always get blender headers. - QtCreator & MSVC for eg, probably others too.
2010-11-29 04:35:56 +00:00
intern/MOD_util.h
Adding WeightVG modifiers code. Still some points to tweak, though. NOTE : Haven’t yet tested build with scons, will do asap (unless someone else does :) ).
2011-07-25 15:27:01 +00:00
intern/MOD_weightvg_util.h
use explicit file paths for CMake rather then globing, This is recommended by cmake devs. globbing vs explicit is discussed here. http://www.cmake.org/pipermail/cmake/2008-December/025694.html Practical implications are: - developers need to keep CMakeLists.txt files up to date. - Users wont get strange linking errors if they build after a file is added, since CMake detects CMakeLists.txt is modified and automatically reconfigure.
2010-10-23 04:05:55 +00:00
)
CMake: prepare for BLENDER_SORTED_LIBS removal No functional change, this adds LIB definition and args to cmake files. Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS' since there are many platforms/configurations that could break when changing linking order. Manually add and enable WITHOUT_SORTED_LIBS to try building without sorted libs (currently fails since all variables are empty). This check will eventually be removed. See T46725.
2019-04-14 15:18:44 +02:00
set(LIB
CMake: add library deps to CMakeLists.txt Tested to work on Linux and macOS. This will be enabled once all platforms are verified. See D4684
2019-04-16 06:18:52 +02:00
bf_blenkernel
bf_blenlib
CMake: prepare for BLENDER_SORTED_LIBS removal No functional change, this adds LIB definition and args to cmake files. Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS' since there are many platforms/configurations that could break when changing linking order. Manually add and enable WITHOUT_SORTED_LIBS to try building without sorted libs (currently fails since all variables are empty). This check will eventually be removed. See T46725.
2019-04-14 15:18:44 +02:00
)
Basic Alembic support All in all, this patch adds an Alembic importer, an Alembic exporter, and a new CacheFile data block which, for now, wraps around an Alembic archive. This data block is made available through a new modifier ("Mesh Sequence Cache") as well as a new constraint ("Transform Cache") to somewhat properly support respectively geometric and transformation data streaming from alembic caches. A more in-depth documentation is to be found on the wiki, as well as a guide to compile alembic: https://wiki.blender.org/index.php/ User:Kevindietrich/AlembicBasicIo. Many thanks to everyone involved in this little project, and huge shout out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the custom builds and compile fixes. Reviewers: sergey, campbellbarton, mont29 Reviewed By: sergey, campbellbarton, mont29 Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
if(WITH_ALEMBIC)
add_definitions(-DWITH_ALEMBIC)
list(APPEND INC
Cleanup: move Alembic, AVI, Collada, and USD to `source/blender/io` This moves the `alembic`, `avi`, `collada`, and `usd` modules into a common `io` directory. This also cleans up some `#include "../../{somedir}/{somefile}.h"` by adding `../../io/{somedir}` to `CMakeLists.txt` and then just using `#include "{somefile}.h"`. No functional changes.
2020-03-06 16:19:35 +01:00
../io/alembic
Basic Alembic support All in all, this patch adds an Alembic importer, an Alembic exporter, and a new CacheFile data block which, for now, wraps around an Alembic archive. This data block is made available through a new modifier ("Mesh Sequence Cache") as well as a new constraint ("Transform Cache") to somewhat properly support respectively geometric and transformation data streaming from alembic caches. A more in-depth documentation is to be found on the wiki, as well as a guide to compile alembic: https://wiki.blender.org/index.php/ User:Kevindietrich/AlembicBasicIo. Many thanks to everyone involved in this little project, and huge shout out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the custom builds and compile fixes. Reviewers: sergey, campbellbarton, mont29 Reviewed By: sergey, campbellbarton, mont29 Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
)
CMake: add library deps to CMakeLists.txt Tested to work on Linux and macOS. This will be enabled once all platforms are verified. See D4684
2019-04-16 06:18:52 +02:00
list(APPEND LIB
bf_alembic
)
Basic Alembic support All in all, this patch adds an Alembic importer, an Alembic exporter, and a new CacheFile data block which, for now, wraps around an Alembic archive. This data block is made available through a new modifier ("Mesh Sequence Cache") as well as a new constraint ("Transform Cache") to somewhat properly support respectively geometric and transformation data streaming from alembic caches. A more in-depth documentation is to be found on the wiki, as well as a guide to compile alembic: https://wiki.blender.org/index.php/ User:Kevindietrich/AlembicBasicIo. Many thanks to everyone involved in this little project, and huge shout out to "cgstrive" for the thorough testings with Maya, 3ds Max, Houdini and Realflow as well as @fjuhec, @jensverwiebe and @jasperge for the custom builds and compile fixes. Reviewers: sergey, campbellbarton, mont29 Reviewed By: sergey, campbellbarton, mont29 Differential Revision: https://developer.blender.org/D2060
2016-08-06 06:20:37 +02:00
endif()
option to build without remesh modifier for cmake and scons
2011-12-31 03:34:44 +00:00
if(WITH_MOD_REMESH)
list(APPEND INC
../../../intern/dualcon
)
CMake: add library deps to CMakeLists.txt Tested to work on Linux and macOS. This will be enabled once all platforms are verified. See D4684
2019-04-16 06:18:52 +02:00
list(APPEND LIB
bf_intern_dualcon
)
CMake: cleanup, arg rename, add definitions last
2019-04-16 06:11:27 +02:00
add_definitions(-DWITH_MOD_REMESH)
option to build without remesh modifier for cmake and scons
2011-12-31 03:34:44 +00:00
endif()
Fix linking errors WITH_MOD_FLUID=OFF
2019-12-17 08:38:08 +11:00
if(WITH_MOD_FLUID)
add_definitions(-DWITH_FLUID)
endif()
rename cmake WITH_OCEANSIM --> WITH_MOD_OCEANSIM and tag CYCLES_CUDA_BINARIES_ARCH as advanced.
2011-11-13 14:16:43 +00:00
if(WITH_MOD_OCEANSIM)
Ocean Sim modifier patch by Matt Ebb, Hamed Zaghaghi This adds a new Modifier "Ocean" to simulate large-scale wave motion. Details can be found in the wiki documentation [1], the project homepage [2] and the patch tracker [3] The modifier is disabled by default for now. To enable it, the WITH_OCEANSIM (cmake) / WITH_BF_OCEANSIM (scons) flags have to be set. The code depends on fftw3, so this also has to be enabled. [1] http://wiki.blender.org/index.php/Doc:2.6/Manual/Modifiers/Simulation/Ocean [2] http://www.savetheoceansim.com [3] http://projects.blender.org/tracker/?group_id=9&atid=127&func=detail&aid=28338
2011-11-13 12:17:27 +00:00
add_definitions(-DWITH_OCEANSIM)
endif()
Subsurf: Show error when Blender is built without OpenSubdiv
2019-09-03 11:43:55 +02:00
if(WITH_OPENSUBDIV)
add_definitions(-DWITH_OPENSUBDIV)
endif()
Fix the skin modifier crashing when building without Bullet.
2014-09-24 22:05:41 +02:00
if(WITH_BULLET)
Make rigidbody simulation handle animated objects gracefully The animated objects was not updated for each internal substep for the rigidbody sim. This would lead to unstable simulations or very annoying clipping artifacts. Updated the code to use explicit substeps and tie it to the scene frame rate. Fix T47402: Properly updating the animated objects fixes the reported issue. Reviewed By: Brecht, Jacques Differential Revision: http://developer.blender.org/D8762
2020-09-02 14:14:47 +02:00
if(NOT WITH_SYSTEM_BULLET)
list(APPEND LIB
extern_bullet
)
endif()
Fix the skin modifier crashing when building without Bullet.
2014-09-24 22:05:41 +02:00
add_definitions(-DWITH_BULLET)
endif()
Fix for yesterday i18n own commit (r44924): we now need to define WITH_INTERNATIONAL everywhere TIP_/IFACE_ macros are used (else, we get non-international, dummy NOP macros instead!). Also fixed in main CMakeList file, when no addon dir found, we want to disable WITH_PYTHON (I guess, certainly not WITH_INTERNATIONAL ;) ).
2012-03-17 12:07:58 +00:00
if(WITH_INTERNATIONAL)
add_definitions(-DWITH_INTERNATIONAL)
endif()
UI: Drag and Drop Modifiers, Layout Updates This patch implements the list panel system D7490 for modifiers. It also moves modifier drawing to a callback in ModifierTypeInfo in line with the extensible architecture refactoring goal T75724. This adds a PanelRegister callback and utilities for registering panels and subpanels. It also adds the callbacks for expansion saving and drag and drop reordering described in D7490. These utilities, callbacks, and other common UI elements shared between modifiers live in MOD_ui_common.c. Because modifier buttons are now in panels, we can make use of subpanels for organization. The UI layouts also use the single column layout style consistently used elsewhere in Blender. Additionally, the mode-setting buttons are aligned and ordered consistently with the outliner. However, the large number of UI changes in this patch may mean that additional polishing is required in master. Thanks to William Reynish (@billreynish) who did a fair amount of the layout work and to Julian Eisel (@Severin) for consistent help. Differential Revision: https://developer.blender.org/D7498
2020-06-05 10:41:03 -04:00
# To disable adaptive subdivision test in subsurf UI without cycles
if(WITH_CYCLES)
add_definitions(-DWITH_CYCLES)
endif()
Merge newboolean branch into master. This is for design task T67744, Boolean Redesign. It adds a choice of solver to the Boolean modifier and the Intersect (Boolean) and Intersect (Knife) tools. The 'Fast' choice is the current Bmesh boolean. The new 'Exact' choice is a more advanced algorithm that supports overlapping geometry and uses more robust calculations, but is slower than the Fast choice. The default with this commit is set to 'Exact'. We can decide before the 2.91 release whether or not this is the right choice, but this choice now will get us more testing and feedback on the new code.
2020-08-28 10:56:44 -04:00
if(WITH_GMP)
add_definitions(-DWITH_GMP)
endif()
Volumes: new Mesh to Volume modifier This modifier can only be added to Volume objects. It takes a mesh as input and generates a "density" grid near the surface or in the enclosed volume. Ref T73201. Reviewers: brecht Differential Revision: https://developer.blender.org/D9032
2020-09-29 16:02:40 +02:00
if(WITH_OPENVDB)
list(APPEND INC
../../../intern/openvdb
)
list(APPEND INC_SYS
${OPENVDB_INCLUDE_DIRS}
)
list(APPEND LIB
bf_intern_openvdb
${OPENVDB_LIBRARIES}
)
add_definitions(-DWITH_OPENVDB ${OPENVDB_DEFINITIONS})
endif()
Modifiers: add StructRNA pointer field to ModifierTypeInfo This reduces the number of places that have to be modified when a new modifier is added. Reviewers: campbellbarton Differential Revision: https://developer.blender.org/D9000
2020-09-25 12:49:18 +02:00
if(WITH_EXPERIMENTAL_FEATURES)
Preferences: separate feature flags for geometry nodes and point cloud type Those two features are not directly related and one might be activated in master earlier than the other. WITH_PARTICLE_NODES was removed, because we continue the project under the name "Geometry Nodes".
2020-10-21 13:47:50 +02:00
add_definitions(-DWITH_GEOMETRY_NODES)
Move Point Cloud object back to Experimental Features The geometry-nodes features no longer depend on the point cloud object. Therefore the point cloud object, although important in the future, can be postponed until we have render and edit mode fully working. This reverts commits: * ea74ed5a7a2031b614d401e394f2e0146fc90155. * dc614c68ef2c8ca8b076a000974b5a20a4145a42.
2020-12-15 13:07:02 +01:00
add_definitions(-DWITH_POINT_CLOUD)
Modifiers: add StructRNA pointer field to ModifierTypeInfo This reduces the number of places that have to be modified when a new modifier is added. Reviewers: campbellbarton Differential Revision: https://developer.blender.org/D9000
2020-09-25 12:49:18 +02:00
add_definitions(-DWITH_HAIR_NODES)
endif()
Support drawing of solid mode CDDM with core profile Nothing terribly exciting, just a hackish implementation of solid mode CDDM drawing for cases when we are building with core profile. The goal is to be able to see SOMETHING with new OpenGL for thew guys who tests alembic and friends in blender2.8 branch. This is a temporary solution, the whole drawing will be reworked. Limited to hardcoded material and lighting. Selection outline color is also hardcoded because of lack of glColor() in the core profile. After this commit there is no big stoppers from stop worrying about legacy OpenGL, so we can go core profile as the only way for Blender. While some areas will become broken after that, we'd better just fix them after that and for now just focus on more important design work.
2017-05-11 15:57:19 +02:00
# So we can have special tricks in modifier system.
CMake: prepare for BLENDER_SORTED_LIBS removal No functional change, this adds LIB definition and args to cmake files. Without this it's difficult to migrate away from 'BLENDER_SORTED_LIBS' since there are many platforms/configurations that could break when changing linking order. Manually add and enable WITHOUT_SORTED_LIBS to try building without sorted libs (currently fails since all variables are empty). This check will eventually be removed. See T46725.
2019-04-14 15:18:44 +02:00
blender_add_lib(bf_modifiers "${SRC}" "${INC}" "${INC_SYS}" "${LIB}")
CMake: Fix compilation errors related on missing dna_type_offsets.h Some of the files were (indirectly) using dna_type_offsets.h without adding dependency from bf_dna (which is needed to ensure the file is generated prior to library compilation).
2020-06-16 12:20:20 +02:00
# Some modifiers include BLO_read_write.h, which includes dna_type_offsets.h
# which is generated by bf_dna. Need to ensure compilaiton order here.
Use DNA defaults system for modifiers As noted in T80164, there are quite a few area of Blender where the "Reset to Default Value" operator in button context menus doesn't work. Modifiers are one of them, because the DNA defaults system was never set up for them. Additionally, this should make modifier versioning easier. Whenever a new field is added it should be automatically initialized to the default value. I had to make some ordering changes in the following modifiers to work around an error with `-Wsign-conversion` in the macros: - Solidify Modifier - Corrective Smooth Modifier - Screw Modifier Some modifiers are special cases and are skipped in this commit: - Data Transfer Modifier - Cloth Modifier - Fluid Modifier - Softbody Modifier Differential Revision: https://developer.blender.org/D8747
2020-10-01 09:38:00 -05:00
# Also needed so we can use dna_type_offsets.h for defaults initialization.
CMake: Fix compilation errors related on missing dna_type_offsets.h Some of the files were (indirectly) using dna_type_offsets.h without adding dependency from bf_dna (which is needed to ensure the file is generated prior to library compilation).
2020-06-16 12:20:20 +02:00
add_dependencies(bf_modifiers bf_dna)
Copy Permalink