Merge branch 'master' into blender2.8

source/blender/blenfont/BLF_api.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2009 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Blender Foundation
  *
  * ***** END GPL LICENSE BLOCK *****
@@ -124,7 +124,7 @@ void BLF_boundbox_ex(int fontid, const char *str, size_t len, struct rctf *box,
 void BLF_boundbox(int fontid, const char *str, size_t len, struct rctf *box) ATTR_NONNULL();
 
 /* The next both function return the width and height
- * of the string, using the current font and both value 
+ * of the string, using the current font and both value
  * are multiplied by the aspect of the font.
  */
 float BLF_width_ex(int fontid, const char *str, size_t len, struct ResultBLF *r_info) ATTR_WARN_UNUSED_RESULT ATTR_NONNULL(2);

source/blender/blenfont/intern/blf_dir.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,7 +17,7 @@
  *
  * The Original Code is Copyright (C) 2009 Blender Foundation.
  * All rights reserved.
- * 
+ *
  * Contributor(s): Blender Foundation.
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenfont/intern/blf_font.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2009 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Blender Foundation
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenfont/intern/blf_glyph.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2009 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Blender Foundation
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenfont/intern/blf_internal.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,7 +17,7 @@
  *
  * The Original Code is Copyright (C) 2009 Blender Foundation.
  * All rights reserved.
- * 
+ *
  * Contributor(s): Blender Foundation.
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenfont/intern/blf_internal_types.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,7 +17,7 @@
  *
  * The Original Code is Copyright (C) 2008 Blender Foundation.
  * All rights reserved.
- * 
+ *
  * Contributor(s): Blender Foundation.
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenfont/intern/blf_util.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2009 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Blender Foundation
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenkernel/BKE_DerivedMesh.h

@@ -38,18 +38,18 @@
  * There are three main mesh data structures in Blender:
  * #Mesh, #CDDerivedMesh and #BMesh.
  *
- * These, and a few others, all implement DerivedMesh interfaces, 
+ * These, and a few others, all implement DerivedMesh interfaces,
- * which contains unified drawing interfaces, a few utility interfaces, 
+ * which contains unified drawing interfaces, a few utility interfaces,
- * and a bunch of read-only interfaces intended mostly for conversion from 
+ * and a bunch of read-only interfaces intended mostly for conversion from
  * one format to another.
  *
  * All Mesh structures in blender make use of CustomData, which is used to store
  * per-element attributes and interpolate them (e.g. uvs, vcols, vgroups, etc).
- * 
+ *
  * Mesh is the "serialized" structure, used for storing object-mode mesh data
  * and also for saving stuff to disk.  It's interfaces are also what DerivedMesh
  * uses to communicate with.
- * 
+ *
  * CDDM is a little mesh library, that uses Mesh data structures in the backend.
  * It's mostly used for modifiers, and has the advantages of not taking much
  * resources.

source/blender/blenkernel/BKE_animsys.h

@@ -185,9 +185,9 @@ bool BKE_animsys_execute_fcurve(struct PointerRNA *ptr, struct AnimMapper *remap
 
 /* ------------ Specialized API --------------- */
 /* There are a few special tools which require these following functions. They are NOT to be used
- * for standard animation evaluation UNDER ANY CIRCUMSTANCES! 
+ * for standard animation evaluation UNDER ANY CIRCUMSTANCES!
  *
- * i.e. Pose Library (PoseLib) uses some of these for selectively applying poses, but 
+ * i.e. Pose Library (PoseLib) uses some of these for selectively applying poses, but
  *	    Particles/Sequencer performing funky time manipulation is not ok.
  */
 

source/blender/blenkernel/BKE_colortools.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

source/blender/blenkernel/BKE_multires.h

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- */ 
+ */
 
 #ifndef __BKE_MULTIRES_H__
 #define __BKE_MULTIRES_H__

source/blender/blenkernel/BKE_node.h

@@ -87,7 +87,7 @@ struct bNodeInstanceHash;
 
 /** Compact definition of a node socket.
  * Can be used to quickly define a list of static sockets for a node,
- * which are added to each new node of that type. 
+ * which are added to each new node of that type.
  *
  * \deprecated This struct is used by C nodes to define templates as simple
  * static struct lists. These are converted to the new template collections

source/blender/blenkernel/BKE_paint.h

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- */ 
+ */
 
 #ifndef __BKE_PAINT_H__
 #define __BKE_PAINT_H__

source/blender/blenkernel/intern/action.c

@@ -265,7 +265,7 @@ bActionGroup *action_groups_add_new(bAction *act, const char name[])
 
 /* Add given channel into (active) group 
  *	- assumes that channel is not linked to anything anymore
- *	- always adds at the end of the group 
+ *	- always adds at the end of the group
  */
 void action_groups_add_channel(bAction *act, bActionGroup *agrp, FCurve *fcurve)
 {	
@@ -914,7 +914,7 @@ void BKE_pose_channel_copy_data(bPoseChannel *pchan, const bPoseChannel *pchan_f
 
 
 /* checks for IK constraint, Spline IK, and also for Follow-Path constraint.
- * can do more constraints flags later 
+ * can do more constraints flags later
  */
 /* pose should be entirely OK */
 void BKE_pose_update_constraint_flags(bPose *pose)
@@ -1388,7 +1388,7 @@ void BKE_pose_tag_recalc(Main *bmain, bPose *pose)
 }
 
 /* For the calculation of the effects of an Action at the given frame on an object 
- * This is currently only used for the Action Constraint 
+ * This is currently only used for the Action Constraint
  */
 void what_does_obaction(Object *ob, Object *workob, bPose *pose, bAction *act, char groupname[], float cframe)
 {

source/blender/blenkernel/intern/anim_sys.c

@@ -141,7 +141,7 @@ AnimData *BKE_animdata_from_id(ID *id)
 
 /* Add AnimData to the given ID-block. In order for this to work, we assume that 
  * the AnimData pointer is stored immediately after the given ID-block in the struct,
- * as per IdAdtTemplate. Also note that 
+ * as per IdAdtTemplate. Also note that
  */
 AnimData *BKE_animdata_add_id(ID *id)
 {
@@ -423,8 +423,8 @@ static bool animpath_matches_basepath(const char path[], const char basepath[])
 }
 
 /* Move F-Curves in src action to dst action, setting up all the necessary groups 
- * for this to happen, but only if the F-Curves being moved have the appropriate 
+ * for this to happen, but only if the F-Curves being moved have the appropriate
- * "base path". 
+ * "base path".
  *	- This is used when data moves from one datablock to another, causing the
  *	  F-Curves to need to be moved over too
  */
@@ -2660,7 +2660,7 @@ static void animsys_evaluate_nla(Depsgraph *depsgraph, ListBase *echannels, Poin
 }
 
 /* NLA Evaluation function (mostly for use through do_animdata) 
- *	- All channels that will be affected are not cleared anymore. Instead, we just evaluate into 
+ *	- All channels that will be affected are not cleared anymore. Instead, we just evaluate into
  *		some temp channels, where values can be accumulated in one go.
  */
 static void animsys_calculate_nla(Depsgraph *depsgraph, PointerRNA *ptr, AnimData *adt, float ctime)
@@ -2714,7 +2714,7 @@ static void animsys_evaluate_overrides(PointerRNA *ptr, AnimData *adt)
 /* Evaluation System - Public API */
 
 /* Overview of how this system works:
- *	1) Depsgraph sorts data as necessary, so that data is in an order that means 
+ *	1) Depsgraph sorts data as necessary, so that data is in an order that means
  *		that all dependencies are resolved before dependents.
  *	2) All normal animation is evaluated, so that drivers have some basis values to
  *		work with
@@ -2722,33 +2722,33 @@ static void animsys_evaluate_overrides(PointerRNA *ptr, AnimData *adt)
  *			which modify the effects of the NLA-stacks
  *		b.	Active Action is evaluated as per normal, on top of the results of the NLA tracks
  *
- * --------------< often in a separate phase... >------------------ 
+ * --------------< often in a separate phase... >------------------
  *
  *	3) Drivers/expressions are evaluated on top of this, in an order where dependencies are
- *		resolved nicely. 
+ *		resolved nicely.
  *	   Note: it may be necessary to have some tools to handle the cases where some higher-level
  *		drivers are added and cause some problematic dependencies that didn't exist in the local levels...
  *
- * --------------< always executed >------------------ 
+ * --------------< always executed >------------------
  *
  * Maintenance of editability of settings (XXX):
  *	In order to ensure that settings that are animated can still be manipulated in the UI without requiring
- *	that keyframes are added to prevent these values from being overwritten, we use 'overrides'. 
+ *	that keyframes are added to prevent these values from being overwritten, we use 'overrides'.
  *
  * Unresolved things:
  *	- Handling of multi-user settings (i.e. time-offset, group-instancing) -> big cache grids or nodal system? but stored where?
- *	- Multiple-block dependencies (i.e. drivers for settings are in both local and higher levels) -> split into separate lists? 
+ *	- Multiple-block dependencies (i.e. drivers for settings are in both local and higher levels) -> split into separate lists?
  *
  * Current Status:
- *	- Currently (as of September 2009), overrides we haven't needed to (fully) implement overrides. 
+ *	- Currently (as of September 2009), overrides we haven't needed to (fully) implement overrides.
  *    However, the code for this is relatively harmless, so is left in the code for now.
  */
 
 /* Evaluation loop for evaluation animation data 
  *
  * This assumes that the animation-data provided belongs to the ID block in question,
- * and that the flags for which parts of the anim-data settings need to be recalculated 
+ * and that the flags for which parts of the anim-data settings need to be recalculated
- * have been set already by the depsgraph. Now, we use the recalc 
+ * have been set already by the depsgraph. Now, we use the recalc
  */
 void BKE_animsys_evaluate_animdata(Depsgraph *depsgraph, Scene *scene, ID *id, AnimData *adt, float ctime, short recalc)
 {

source/blender/blenkernel/intern/appdir.c

@@ -718,13 +718,13 @@ bool BKE_appdir_app_template_id_search(const char *app_template, char *path, siz
 /**
  * Gets the temp directory when blender first runs.
  * If the default path is not found, use try $TEMP
- * 
+ *
  * Also make sure the temp dir has a trailing slash
  *
  * \param fullname The full path to the temporary temp directory
  * \param basename The full path to the persistent temp directory (may be NULL)
  * \param maxlen The size of the fullname buffer
- * \param userdir Directory specified in user preferences 
+ * \param userdir Directory specified in user preferences
  */
 static void where_is_temp(char *fullname, char *basename, const size_t maxlen, char *userdir)
 {

source/blender/blenkernel/intern/colortools.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

source/blender/blenkernel/intern/constraint.c

@@ -103,7 +103,7 @@
 
 /* ************************ Constraints - General Utilities *************************** */
 /* These functions here don't act on any specific constraints, and are therefore should/will
- * not require any of the special function-pointers afforded by the relevant constraint 
+ * not require any of the special function-pointers afforded by the relevant constraint
  * type-info structs.
  */
 
@@ -654,7 +654,7 @@ static void constraint_target_to_mat4(Object *ob, const char *substring, float m
 /* ************************* Specific Constraints ***************************** */
 /* Each constraint defines a set of functions, which will be called at the appropriate
  * times. In addition to this, each constraint should have a type-info struct, where
- * its functions are attached for use. 
+ * its functions are attached for use.
  */
  
 /* Template for type-info data:
@@ -663,7 +663,7 @@ static void constraint_target_to_mat4(Object *ob, const char *substring, float m
  *  - although the naming of functions doesn't matter, it would help for code
  *    readability, to follow the same naming convention as is presented here
  *  - any functions that a constraint doesn't need to define, don't define
- *    for such cases, just use NULL 
+ *    for such cases, just use NULL
  *  - these should be defined after all the functions have been defined, so that
  *    forward-definitions/prototypes don't need to be used!
  *	- keep this copy #if-def'd so that future constraints can get based off this
@@ -4456,7 +4456,7 @@ static void con_unlink_refs_cb(bConstraint *UNUSED(con), ID **idpoin, bool is_re
 
 /* Free data of a specific constraint if it has any info.
  * be sure to run BIK_clear_data() when freeing an IK constraint,
- * unless DAG_relations_tag_update is called. 
+ * unless DAG_relations_tag_update is called.
  */
 void BKE_constraint_free_data_ex(bConstraint *con, bool do_id_user)
 {
@@ -4805,7 +4805,7 @@ bool BKE_constraints_proxylocked_owner(Object *ob, bPoseChannel *pchan)
 
 /* This function is a relic from the prior implementations of the constraints system, when all
  * constraints either had one or no targets. It used to be called during the main constraint solving
- * loop, but is now only used for the remaining cases for a few constraints. 
+ * loop, but is now only used for the remaining cases for a few constraints.
  *
  * None of the actual calculations of the matrices should be done here! Also, this function is
  * not to be used by any new constraints, particularly any that have multiple targets.
@@ -4910,7 +4910,7 @@ void BKE_constraint_targets_for_solving_get(struct Depsgraph *depsgraph, bConstr
 /* This function is called whenever constraints need to be evaluated. Currently, all
  * constraints that can be evaluated are every time this gets run.
  *
- * BKE_constraints_make_evalob and BKE_constraints_clear_evalob should be called before and 
+ * BKE_constraints_make_evalob and BKE_constraints_clear_evalob should be called before and
  * after running this function, to sort out cob
  */
 void BKE_constraints_solve(struct Depsgraph *depsgraph, ListBase *conlist, bConstraintOb *cob, float ctime)

source/blender/blenkernel/intern/data_transfer_intern.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2014 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Bastien Montagne
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenkernel/intern/fcurve.c

@@ -270,7 +270,7 @@ FCurve *iter_step_fcurve(FCurve *fcu_iter, const char rna_path[])
 
 /* Get list of LinkData's containing pointers to the F-Curves which control the types of data indicated 
  * Lists...
- *	- dst: list of LinkData's matching the criteria returned. 
+ *	- dst: list of LinkData's matching the criteria returned.
  *	  List must be freed after use, and is assumed to be empty when passed.
  *	- src: list of F-Curves to search through
  * Filters...
@@ -879,7 +879,7 @@ void fcurve_store_samples(FCurve *fcu, void *data, int start, int end, FcuSample
 /* ***************************** F-Curve Sanity ********************************* */
 /* The functions here are used in various parts of Blender, usually after some editing
  * of keyframe data has occurred. They ensure that keyframe data is properly ordered and
- * that the handles are correctly 
+ * that the handles are correctly
  */
 
 /* Checks if the F-Curve has a Cycles modifier with simple settings that warrant transition smoothing */

source/blender/blenkernel/intern/fmodifier.c

@@ -58,14 +58,14 @@ void *fmodifiers_storage_get(FModifierStackStorage *storage, FModifier *fcm);
 /* Info ------------------------------- */
 
 /* F-Modifiers are modifiers which operate on F-Curves. However, they can also be defined
- * on NLA-Strips to affect all of the F-Curves referenced by the NLA-Strip. 
+ * on NLA-Strips to affect all of the F-Curves referenced by the NLA-Strip.
  */
 
 /* Template --------------------------- */
 
 /* Each modifier defines a set of functions, which will be called at the appropriate
  * times. In addition to this, each modifier should have a type-info struct, where
- * its functions are attached for use. 
+ * its functions are attached for use.
  */
  
 /* Template for type-info data:
@@ -74,7 +74,7 @@ void *fmodifiers_storage_get(FModifierStackStorage *storage, FModifier *fcm);
  *  - although the naming of functions doesn't matter, it would help for code
  *    readability, to follow the same naming convention as is presented here
  *  - any functions that a constraint doesn't need to define, don't define
- *    for such cases, just use NULL 
+ *    for such cases, just use NULL
  *  - these should be defined after all the functions have been defined, so that
  *    forward-definitions/prototypes don't need to be used!
  *	- keep this copy #if-def'd so that future constraints can get based off this
@@ -260,7 +260,7 @@ static FModifierTypeInfo FMI_GENERATOR = {
  * x is the evaluation 'time', and 'y' is the resultant value
  *
  * Functions available are
- *	sin, cos, tan, sinc (normalized sin), natural log, square root 
+ *	sin, cos, tan, sinc (normalized sin), natural log, square root
  */
 
 static void fcm_fn_generator_new_data(void *mdata)
@@ -1397,7 +1397,7 @@ static float eval_fmodifier_influence(FModifier *fcm, float evaltime)
 }
 
 /* evaluate time modifications imposed by some F-Curve Modifiers
- *	- this step acts as an optimization to prevent the F-Curve stack being evaluated 
+ *	- this step acts as an optimization to prevent the F-Curve stack being evaluated
  *	  several times by modifiers requesting the time be modified, as the final result
  *	  would have required using the modified time
  *	- modifiers only ever receive the unmodified time, as subsequent modifiers should be

source/blender/blenkernel/intern/ipo.c

@@ -251,7 +251,7 @@ static const char *ob_adrcodes_to_paths(int adrcode, int *array_index)
 }
 
 /* PoseChannel types 
- * NOTE: pchan name comes from 'actname' added earlier... 
+ * NOTE: pchan name comes from 'actname' added earlier...
  */
 static const char *pchan_adrcodes_to_paths(int adrcode, int *array_index)
 {
@@ -314,7 +314,7 @@ static const char *constraint_adrcodes_to_paths(int adrcode, int *array_index)
 }
 
 /* ShapeKey types 
- * NOTE: as we don't have access to the keyblock where the data comes from (for now), 
+ * NOTE: as we don't have access to the keyblock where the data comes from (for now),
  *       we'll just use numerical indices for now...
  */
 static char *shapekey_adrcodes_to_paths(ID *id, int adrcode, int *UNUSED(array_index))
@@ -1672,10 +1672,10 @@ static void nlastrips_to_animdata(ID *id, ListBase *strips)
 /* Called from do_versions() in readfile.c to convert the old 'IPO/adrcode' system
  * to the new 'Animato/RNA' system.
  *
- * The basic method used here, is to loop over datablocks which have IPO-data, and 
+ * The basic method used here, is to loop over datablocks which have IPO-data, and
- * add those IPO's to new AnimData blocks as Actions. 
+ * add those IPO's to new AnimData blocks as Actions.
  * Action/NLA data only works well for Objects, so these only need to be checked for there.
- *  
+ *
  * Data that has been converted should be freed immediately, which means that it is immediately
  * clear which datablocks have yet to be converted, and also prevent freeing errors when we exit.
  */

source/blender/blenkernel/intern/mball.c

@@ -277,7 +277,7 @@ float *BKE_mball_make_orco(Object *ob, ListBase *dispbase)
  * This really needs a rewrite/refactor its totally broken in anything other then basic cases
  * Multiple Scenes + Set Scenes & mixing mball basis SHOULD work but fails to update the depsgraph on rename
  * and linking into scenes or removal of basis mball. so take care when changing this code.
- * 
+ *
  * Main idiot thing here is that the system returns find_basis_mball() objects which fail a is_basis_mball() test.
  *
  * Not only that but the depsgraph and their areas depend on this behavior!, so making small fixes here isn't worth it.

source/blender/blenkernel/intern/modifier.c

@@ -400,9 +400,9 @@ void modifier_setError(ModifierData *md, const char *_format, ...)
 
 /* used for buttons, to find out if the 'draw deformed in editmode' option is
  * there
- * 
+ *
  * also used in transform_conversion.c, to detect CrazySpace [tm] (2nd arg
- * then is NULL) 
+ * then is NULL)
  * also used for some mesh tools to give warnings
  */
 int modifiers_getCageIndex(struct Scene *scene, Object *ob, int *r_lastPossibleCageIndex, bool is_virtual)

source/blender/blenkernel/intern/nla.c

@@ -73,7 +73,7 @@
 /* Freeing ------------------------------------------- */
 
 /* Remove the given NLA strip from the NLA track it occupies, free the strip's data,
- * and the strip itself. 
+ * and the strip itself.
  */
 void BKE_nlastrip_free(ListBase *strips, NlaStrip *strip)
 {
@@ -400,7 +400,7 @@ NlaStrip *BKE_nla_add_soundstrip(Scene *scene, Speaker *speaker)
 /* Strip Mapping ------------------------------------- */
 
 /* non clipped mapping for strip-time <-> global time (for Action-Clips)
- *	invert = convert action-strip time to global time 
+ *	invert = convert action-strip time to global time
  */
 static float nlastrip_get_frame_actionclip(NlaStrip *strip, float cframe, short mode)
 {
@@ -470,7 +470,7 @@ static float nlastrip_get_frame_actionclip(NlaStrip *strip, float cframe, short
 }
 
 /* non clipped mapping for strip-time <-> global time (for Transitions)
- *	invert = convert action-strip time to global time 
+ *	invert = convert action-strip time to global time
  */
 static float nlastrip_get_frame_transition(NlaStrip *strip, float cframe, short mode)
 {
@@ -597,7 +597,7 @@ bool BKE_nlastrips_has_space(ListBase *strips, float start, float end)
 }
 
 /* Rearrange the strips in the track so that they are always in order 
- * (usually only needed after a strip has been moved) 
+ * (usually only needed after a strip has been moved)
  */
 void BKE_nlastrips_sort_strips(ListBase *strips)
 {
@@ -1037,7 +1037,7 @@ bool BKE_nlatrack_has_space(NlaTrack *nlt, float start, float end)
 }
 
 /* Rearrange the strips in the track so that they are always in order 
- * (usually only needed after a strip has been moved) 
+ * (usually only needed after a strip has been moved)
  */
 void BKE_nlatrack_sort_strips(NlaTrack *nlt)
 {
@@ -1050,7 +1050,7 @@ void BKE_nlatrack_sort_strips(NlaTrack *nlt)
 }
 
 /* Add the given NLA-Strip to the given NLA-Track, assuming that it 
- * isn't currently attached to another one 
+ * isn't currently attached to another one
  */
 bool BKE_nlatrack_add_strip(NlaTrack *nlt, NlaStrip *strip)
 {
@@ -1757,7 +1757,7 @@ bool BKE_nla_action_stash(AnimData *adt)
 /* Core Tools ------------------------------------------- */
 
 /* For the given AnimData block, add the active action to the NLA
- * stack (i.e. 'push-down' action). The UI should only allow this 
+ * stack (i.e. 'push-down' action). The UI should only allow this
  * for normal editing only (i.e. not in editmode for some strip's action),
  * so no checks for this are performed.
  */

source/blender/blenkernel/intern/node.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -836,7 +836,7 @@ bool nodeIsChildOf(const bNode *parent, const bNode *child)
 /**
  * Iterate over a chain of nodes, starting with \a node_start, executing
  * \a callback for each node (which can return false to end iterator).
- * 
+ *
  * \param reversed for backwards iteration
  * \note Recursive
  */
@@ -868,7 +868,7 @@ void nodeChainIter(
 
 /**
  * Iterate over all parents of \a node, executing \a callback for each parent (which can return false to end iterator)
- * 
+ *
  * \note Recursive
  */
 void nodeParentsIter(bNode *node, bool (*callback)(bNode *, void *), void *userdata)

source/blender/blenkernel/intern/object.c

@@ -3394,7 +3394,7 @@ static void obrel_list_add(LinkNode **links, Object *ob)
  * Iterates over all objects of the given scene layer.
  * Depending on the eObjectSet flag:
  * collect either OB_SET_ALL, OB_SET_VISIBLE or OB_SET_SELECTED objects.
- * If OB_SET_VISIBLE or OB_SET_SELECTED are collected, 
+ * If OB_SET_VISIBLE or OB_SET_SELECTED are collected,
  * then also add related objects according to the given includeFilters.
  */
 LinkNode *BKE_object_relational_superset(struct ViewLayer *view_layer, eObjectSet objectSet, eObRelationTypes includeFilter)

source/blender/blenkernel/intern/particle_system.c

@@ -1449,7 +1449,7 @@ static void integrate_particle(ParticleSettings *part, ParticleData *pa, float d
 }
 
 /*********************************************************************************************************
- *                    SPH fluid physics 
+ *                    SPH fluid physics
  *
  * In theory, there could be unlimited implementation of SPH simulators
  *

source/blender/blenkernel/intern/pointcache.c

@@ -2959,7 +2959,7 @@ int BKE_ptcache_write(PTCacheID *pid, unsigned int cfra)
 	return !error;
 }
 /* youll need to close yourself after!
- * mode - PTCACHE_CLEAR_ALL, 
+ * mode - PTCACHE_CLEAR_ALL,
  */
 
 /* Clears & resets */

source/blender/blenkernel/intern/scene.c

@@ -1229,7 +1229,7 @@ bool BKE_scene_validate_setscene(Main *bmain, Scene *sce)
 }
 
 /* This function is needed to cope with fractional frames - including two Blender rendering features
- * mblur (motion blur that renders 'subframes' and blurs them together), and fields rendering. 
+ * mblur (motion blur that renders 'subframes' and blurs them together), and fields rendering.
  */
 float BKE_scene_frame_get(const Scene *scene)
 {

source/blender/blenkernel/intern/seqeffects.c

@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
  * All rights reserved.
  *
- * Contributor(s): 
+ * Contributor(s):
  * - Blender Foundation, 2003-2009
  * - Peter Schlaile <peter [at] schlaile [dot] de> 2005/2006
  *

source/blender/blenkernel/intern/sequencer.c

@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
  * All rights reserved.
  *
- * Contributor(s): 
+ * Contributor(s):
  * - Blender Foundation, 2003-2009
  * - Peter Schlaile <peter [at] schlaile [dot] de> 2005/2006
  *

source/blender/blenkernel/intern/writeffmpeg.c

@@ -1042,19 +1042,19 @@ fail:
 }
 
 /**
- * Writes any delayed frames in the encoder. This function is called before 
+ * Writes any delayed frames in the encoder. This function is called before
  * closing the encoder.
  *
  * <p>
- * Since an encoder may use both past and future frames to predict 
+ * Since an encoder may use both past and future frames to predict
- * inter-frames (H.264 B-frames, for example), it can output the frames 
+ * inter-frames (H.264 B-frames, for example), it can output the frames
  * in a different order from the one it was given.
  * For example, when sending frames 1, 2, 3, 4 to the encoder, it may write
  * them in the order 1, 4, 2, 3 - first the two frames used for prediction,
- * and then the bidirectionally-predicted frames. What this means in practice 
+ * and then the bidirectionally-predicted frames. What this means in practice
- * is that the encoder may not immediately produce one output frame for each 
+ * is that the encoder may not immediately produce one output frame for each
- * input frame. These delayed frames must be flushed before we close the 
+ * input frame. These delayed frames must be flushed before we close the
- * stream. We do this by calling avcodec_encode_video with NULL for the last 
+ * stream. We do this by calling avcodec_encode_video with NULL for the last
  * parameter.
  * </p>
  */

source/blender/blenlib/BLI_blenlib.h

@@ -45,10 +45,10 @@
  *
  * - blenlib is written in C.
  * - The posix-compliance may move to a separate lib that deals with
- *   platform dependencies. (There are other platform-dependent 
+ *   platform dependencies. (There are other platform-dependent
  *   fixes as well.)
  * - The file i/o has some redundant code. It should be cleaned.
- * 
+ *
  * \subsection dependencies Dependencies
  *
  * - The blenlib uses type defines from \ref DNA, and functions from

source/blender/blenlib/BLI_dial_2d.h

@@ -25,14 +25,14 @@
  *  \ingroup bli
  *
  * \note dials act similar to old rotation based phones and output an angle.
- * 
+ *
  * They just are initialized with the center of the dial and a threshold value as input.
- * 
+ *
- * When the distance of the current position of the dial from the center 
+ * When the distance of the current position of the dial from the center
- * exceeds the threshold, this position is used to calculate the initial direction. 
+ * exceeds the threshold, this position is used to calculate the initial direction.
  * After that, the angle from the initial direction is calculated based on
  * current and previous directions of the digit, and returned to the user.
- * 
+ *
  * Usage examples:
  *
  * \code{.c}
@@ -41,11 +41,11 @@
  * float threshold = 0.5f;
  * float angle;
  * Dial *dial;
- * 
+ *
  * dial = BLI_dial_initialize(start_position, threshold);
  *
  * angle = BLI_dial_angle(dial, curent_position);
- * 
+ *
  * MEM_freeN(dial);
  * \endcode
  */

source/blender/blenlib/BLI_dlrbTree.h

@@ -32,7 +32,7 @@
  */
 
 /* Double-Linked Red-Black Tree Implementation:
- * 
+ *
  * This is simply a Red-Black Tree implementation whose nodes can later
  * be arranged + retrieved as elements in a Double-Linked list (i.e. ListBase).
  * The Red-Black Tree implementation is based on the methods defined by Wikipedia.

source/blender/blenlib/BLI_fnmatch.h

@@ -2,17 +2,17 @@
  *
  * NOTE: The canonical source of this file is maintained with the GNU C Library.
  * Bugs can be reported to bug-glibc@prep.ai.mit.edu.
- * 
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
  * later version.
- * 
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  */

source/blender/blenlib/BLI_memarena.h

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- */ 
+ */
 
 /** \file BLI_memarena.h
  *  \ingroup bli

source/blender/blenlib/BLI_noise.h

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- * 
+ *
  */
 
 #ifndef __BLI_NOISE_H__

source/blender/blenlib/BLI_task.h

@@ -40,7 +40,7 @@ extern "C" {
 struct BLI_mempool;
 
 /* Task Scheduler
- * 
+ *
  * Central scheduler that holds running threads ready to execute tasks. A single
  * queue holds the task from all pools.
  *

source/blender/blenlib/BLI_threads.h

@@ -76,7 +76,7 @@ void    BLI_system_num_threads_override_set(int num);
 int     BLI_system_num_threads_override_get(void);
 	
 /* Global Mutex Locks
- * 
+ *
  * One custom lock available now. can be extended. */
 
 #define LOCK_IMAGE      0

source/blender/blenlib/BLI_timecode.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2008 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Joshua Leung
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenlib/BLI_vfontdata.h

@@ -30,7 +30,7 @@
 
 /** \file BLI_vfontdata.h
  *  \ingroup bli
- *  \brief A structure to represent vector fonts, 
+ *  \brief A structure to represent vector fonts,
  *   and to load them from PostScript fonts.
  */
 

source/blender/blenlib/intern/BLI_kdtree.c

@@ -751,7 +751,7 @@ static void deduplicate_recursive(const struct DeDuplicateParams *p, uint i)
  * although it can still be used as a target.
  * \returns The numebr of merges found (includes any merges already in the \a duplicates array).
  *
- * \note Merging is always a single step (target indices wont be marked for merging). 
+ * \note Merging is always a single step (target indices wont be marked for merging).
  */
 int BLI_kdtree_calc_duplicates_fast(
         const KDTree *tree, const float range, bool use_index_order,

source/blender/blenlib/intern/boxpack_2d.c

@@ -50,7 +50,7 @@
 
 
 /* BoxPacker for backing 2D rectangles into a square
- * 
+ *
  * The defined Below are for internal use only */
 typedef struct BoxVert {
 	float x;
@@ -271,7 +271,7 @@ static int vertex_sort(const void *p1, const void *p2, void *vs_ctx_p)
  * This sets boxes x,y to positive values, sorting from 0,0 outwards.
  * There is no limit to the space boxes may take, only that they will be packed
  * tightly into the lower left hand corner (0,0)
- * 
+ *
  * \param boxarray: a pre allocated array of boxes.
  *      only the 'box->x' and 'box->y' are set, 'box->w' and 'box->h' are used,
  *      'box->index' is not used at all, the only reason its there

source/blender/blenlib/intern/jitter_2d.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

source/blender/blenlib/intern/listbase.c

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- * 
+ *
  */
 
 /** \file blender/blenlib/intern/listbase.c

source/blender/blenlib/intern/math_geom.c

@@ -979,7 +979,7 @@ float dist_squared_to_projected_aabb_simple(
 
 /* Adapted from "Real-Time Collision Detection" by Christer Ericson,
  * published by Morgan Kaufmann Publishers, copyright 2005 Elsevier Inc.
- * 
+ *
  * Set 'r' to the point in triangle (a, b, c) closest to point 'p' */
 void closest_on_tri_to_point_v3(float r[3], const float p[3],
                                 const float a[3], const float b[3], const float c[3])

source/blender/blenlib/intern/path_util.c

@@ -1745,7 +1745,7 @@ bool BLI_path_name_at_index(const char *path, const int index, int *r_offset, in
 #if 0
 /**
  * Produce image export path.
- * 
+ *
  * Returns:
  * 0        if image filename is empty or if destination path
  *          matches image path (i.e. both are the same file).
@@ -1759,12 +1759,12 @@ bool BLI_path_name_at_index(const char *path, const int index, int *r_offset, in
  * - if an image is "below" current .blend file directory:
  *   rebuild the same dir structure in dest_dir
  *
- *   Example: 
+ *   Example:
  *   src : //textures/foo/bar.png
  *   dest: [dest_dir]/textures/foo/bar.png.
  *
  * - if an image is not "below" current .blend file directory,
- *   disregard it's path and copy it into the destination  
+ *   disregard it's path and copy it into the destination
  *   directory.
  *
  *   Example:

source/blender/blenlib/intern/string.c

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- * 
+ *
  */
 
 /** \file blender/blenlib/intern/string.c

source/blender/blenlib/intern/string_utils.c

@@ -21,7 +21,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- * 
+ *
  */
 
 /** \file blender/blenlib/intern/string_utils.c

source/blender/blenlib/intern/threads.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -70,29 +70,29 @@ static void *thread_tls_data;
 static TaskScheduler *task_scheduler = NULL;
 
 /* ********** basic thread control API ************ 
- * 
+ *
  * Many thread cases have an X amount of jobs, and only an Y amount of
  * threads are useful (typically amount of cpus)
  *
  * This code can be used to start a maximum amount of 'thread slots', which
- * then can be filled in a loop with an idle timer. 
+ * then can be filled in a loop with an idle timer.
  *
  * A sample loop can look like this (pseudo c);
  *
  *     ListBase lb;
  *     int maxthreads = 2;
  *     int cont = 1;
- * 
+ *
  *     BLI_threadpool_init(&lb, do_something_func, maxthreads);
- * 
+ *
  *     while (cont) {
  *         if (BLI_available_threads(&lb) && !(escape loop event)) {
  *             // get new job (data pointer)
- *             // tag job 'processed 
+ *             // tag job 'processed
  *             BLI_threadpool_insert(&lb, job);
  *         }
  *         else PIL_sleep_ms(50);
- *         
+ *
  *         // find if a job is ready, this the do_something_func() should write in job somewhere
  *         cont = 0;
  *         for (go over all jobs)
@@ -103,13 +103,13 @@ static TaskScheduler *task_scheduler = NULL;
  *             }
  *             else cont = 1;
  *         }
- *         // conditions to exit loop 
+ *         // conditions to exit loop
  *         if (if escape loop event) {
  *             if (BLI_available_threadslots(&lb) == maxthreads)
  *                 break;
  *         }
  *     }
- * 
+ *
  *     BLI_threadpool_end(&lb);
  *
  ************************************************ */

source/blender/blenlib/intern/timecode.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -18,7 +18,7 @@
  * The Original Code is Copyright (C) 2008 Blender Foundation.
  * All rights reserved.
  *
- * 
+ *
  * Contributor(s): Joshua Leung
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blenloader/BLO_runtime.h

@@ -23,7 +23,7 @@
  * Contributor(s): none yet.
  *
  * ***** END GPL LICENSE BLOCK *****
- * 
+ *
  */
 
 #ifndef __BLO_RUNTIME_H__

source/blender/blenloader/intern/readfile.c

@@ -2716,7 +2716,7 @@ static void lib_link_nladata(FileData *fd, ID *id, ListBase *list)
 }
 
 /* This handles Animato NLA-Strips linking 
- * NOTE: this assumes that link_list has already been called on the list 
+ * NOTE: this assumes that link_list has already been called on the list
  */
 static void direct_link_nladata_strips(FileData *fd, ListBase *list)
 {

source/blender/blentranslation/BLT_lang.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

source/blender/blentranslation/BLT_translation.h

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

source/blender/blentranslation/intern/blt_lang.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,7 +17,7 @@
  *
  * The Original Code is Copyright (C) 2008 Blender Foundation.
  * All rights reserved.
- * 
+ *
  * Contributor(s): Blender Foundation.
  *
  * ***** END GPL LICENSE BLOCK *****

source/blender/blentranslation/intern/blt_translation.c

@@ -4,7 +4,7 @@
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version. 
+ * of the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of

source/blender/bmesh/intern/bmesh_log.c

@@ -906,7 +906,7 @@ void BM_log_face_added(BMLog *log, BMFace *f)
 /* Log a vertex as removed from the BMesh
  *
  * A couple things can happen here:
- * 
+ *
  * If the vertex was added as part of the current log entry, then it's
  * deleted and forgotten about entirely. Its unique ID is returned to
  * the unused pool.
@@ -950,7 +950,7 @@ void BM_log_vert_removed(BMLog *log, BMVert *v, const int cd_vert_mask_offset)
 /* Log a face as removed from the BMesh
  *
  * A couple things can happen here:
- * 
+ *
  * If the face was added as part of the current log entry, then it's
  * deleted and forgotten about entirely. Its unique ID is returned to
  * the unused pool.

source/blender/bmesh/operators/bmo_create.c

@@ -21,7 +21,7 @@
  */
 
 /** \file blender/bmesh/operators/bmo_create.c
- *  \ingroup bmesh 
+ *  \ingroup bmesh
  *
  * Create faces or edges (Fkey by default).
  */

source/blender/collada/AnimationExporter.cpp

@@ -60,7 +60,7 @@ bool AnimationExporter::is_flat_line(std::vector<float> &values, int channel_cou
 	return true;
 }
 /*
- *  This function creates a complete LINEAR Collada <Animation> Entry with all needed 
+ *  This function creates a complete LINEAR Collada <Animation> Entry with all needed
  *  <source>, <sampler>, and <channel> entries.
  *  This is is used for creating sampled Transformation Animations for either:
  *
@@ -78,8 +78,8 @@ bool AnimationExporter::is_flat_line(std::vector<float> &values, int channel_cou
  *			axis_name = "" (actually not used)
  *			is_rot = false (see xxx below)
  *
- *	xxx: I tried to create a 3 axis rotation animation 
+ *	xxx: I tried to create a 3 axis rotation animation
- *		 like for translation or scale. But i could not 
+ *		 like for translation or scale. But i could not
  *		 figure out how to setup the channel for this case.
  *		 So for now rotations are exported as 3 separate 1-axis collada animations
  *		 See export_sampled_animation() further down.
@@ -1035,8 +1035,8 @@ void AnimationExporter::evaluate_anim_with_constraints(Object *ob, float ctime)
 /*
  * ob is needed to aply parent inverse information to fcurve.
  * TODO: Here we have to step over all keyframes for each object and for each fcurve.
- * Instead of processing each fcurve one by one, 
+ * Instead of processing each fcurve one by one,
- * step over the animation from keyframe to keyframe, 
+ * step over the animation from keyframe to keyframe,
  * then create adjusted fcurves (and entries) for all affected objects.
  * Then we would need to step through the scene only once.
  */
@@ -1572,7 +1572,7 @@ std::string AnimationExporter::get_camera_param_sid(char *rna_path, int tm_type,
 }
 
 /*
- * Assign sid of the animated parameter or transform for rotation, 
+ * Assign sid of the animated parameter or transform for rotation,
  * axis name is always appended and the value of append_axis is ignored
  */
 std::string AnimationExporter::get_transform_sid(char *rna_path, int tm_type, const char *axis_name, bool append_axis)

source/blender/collada/AnimationImporter.cpp

@@ -869,7 +869,7 @@ void AnimationImporter::apply_matrix_curves(Object *ob, std::vector<FCurve *>& a
 /*
  * This function returns the aspet ration from the Collada camera.
  *
- * Note:COLLADA allows to specify either XFov, or YFov alone. 
+ * Note:COLLADA allows to specify either XFov, or YFov alone.
  * In that case the aspect ratio can be determined from
  * the viewport aspect ratio (which is 1:1 ?)
  * XXX: check this: its probably wrong!

source/blender/collada/collada_utils.cpp

@@ -307,7 +307,7 @@ void bc_bubble_sort_by_Object_name(LinkNode *export_set)
 }
 
 /* Check if a bone is the top most exportable bone in the bone hierarchy. 
- * When deform_bones_only == false, then only bones with NO parent 
+ * When deform_bones_only == false, then only bones with NO parent
  * can be root bones. Otherwise the top most deform bones in the hierarchy
  * are root bones.
  */

source/blender/compositor/COM_compositor.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 
@@ -326,7 +326,7 @@ void COM_execute(RenderData *rd, Scene *scene, bNodeTree *editingtree, int rende
 void COM_deinitialize(void);
 
 /**
- * @brief Clear all compositor caches. (Compositor system will still remain available). 
+ * @brief Clear all compositor caches. (Compositor system will still remain available).
  * To deinitialize the compositor use the COM_deinitialize method.
  */
 // void COM_clearCaches(void); // NOT YET WRITTEN

source/blender/compositor/COM_defines.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_CPUDevice.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_CPUDevice.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ChunkOrder.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ChunkOrder.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ChunkOrderHotspot.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ChunkOrderHotspot.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_CompositorContext.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_CompositorContext.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_Converter.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_Converter.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_Debug.cpp

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_Debug.h

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_Device.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_Device.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ExecutionGroup.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ExecutionGroup.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ExecutionSystem.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_ExecutionSystem.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_MemoryBuffer.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_MemoryBuffer.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_MemoryProxy.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_MemoryProxy.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_Node.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_Node.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_NodeConverter.cpp

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_NodeConverter.h

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_NodeGraph.cpp

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_NodeGraph.h

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_NodeOperation.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_NodeOperation.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_NodeOperationBuilder.cpp

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_NodeOperationBuilder.h

@@ -15,7 +15,7 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
  *		Lukas Toenne
  */
 

source/blender/compositor/intern/COM_OpenCLDevice.cpp

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */
 

source/blender/compositor/intern/COM_OpenCLDevice.h

@@ -15,8 +15,8 @@
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  *
- * Contributor: 
+ * Contributor:
- *		Jeroen Bakker 
+ *		Jeroen Bakker
  *		Monique Dewanchand
  */