This patch adds support to export and import grease pencil in several formats.
Inlude:
* Export SVG
* Export PDF (always from camera view)
* Import SVG
The import and export only support solid colors and not gradients or textures.
Requires libharu and pugixml.
For importing SVG, the NanoSVG lib is used, but this does not require installation (just a .h file embedded in the project folder)
Example of PDF export: https://youtu.be/BMm0KeMJsI4
Reviewed By: #grease_pencil, HooglyBoogly
Maniphest Tasks: T83190, T79875, T83191, T83192
Differential Revision: https://developer.blender.org/D10482
Add operator `FILE_OT_view_selected` to the file browser (and thus also
to the asset browser) that scrolls selected files into view.
This includes the active file, even though it is not selected. In
certain cases the active file can loose its selected state (clicking
next to it, or refreshing the asset browser), but then it's still shown
in the right-hand sidebar. Because of this, I found it important to take
it into account when scrolling.
This also includes a change to the keymaps:
- Blender default: {key NUMPAD_PERIOD} is removed from the "reload"
operator, and assigned to the new "view selected files" operator. The
reload operator was already doubly bound, and now {key R} is the only
remaining hotkey for it.
- Industry compatible: {key F} is assigned to the new "view selected
files" operator. This is consistent with the other "view selected"
operators in other editors.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10583
Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
The "Current File" asset library didn't get refreshed after the data-block name
changed. But rather than entirely refreshing the file list, or doing possibly
problematic partial refreshes, reference the data-block name directly, so a
simple redraw gets the new name displayed.
Addresses T83751
Otherwise it would just show empty space where the icon is supposed to
be.
Unfortunately this icon is upscaled quite a bit and doesn't look too
great. Would be good to improve but not a high priority.
Storing the asset library reference by name wasn't a good idea, I thought it
would work with a careful fallback, but it's easier to just use the index
instead. So change to using indices, make sure fallback methods work reliable
and make sure the file list is updated when asset libraries are removed.
I added a new notifier type for the latter, I prefer not using file notifiers
in asset-library/preferences code. We have more than enough values for
notifiers left.
The Asset Browser will be a sub-editor of the File Browser. This prepares the
File Browser code for that.
**File-Lists**
* Support loading assets with metadata read from external files into the
file-list.
* New main based file-list type, for the "Current File" asset library.
* Refresh file-list when switching between browse modes or asset libraries.
* Support empty file-lists (asset library with no assets).
* Store file previews as icons, so scripts can reference them via icon-id. See
previous commit.
**Space Data**
* Introduce "browse mode" to differeniate between file and asset browsing.
* Add `FileAssetSelectParams` to `SpaceFile`, with `FileSelectParams` as base.
Makes sure data is separated between asset and file browsing when switching
between them. The active params can be obtained through
`ED_fileselect_get_active_params()`.
* `FileAssetSelectParams` stores the currently visible asset library ID.
* Introduce file history abstraction so file and asset browsing can keep a
separate history (previous and next directories).
**General**
* Option to only show asset data-blocks while file browsing (not exposed here).
* Add "active_file" context member, so scripts can get and display info about
the active file.
* Add "active_id" context member, so `ED_OT_lib_id_load_custom_preview` can set
a custom ID preview. (Only for "Current File" asset library)
* Expose some of `FileDirEntry` in RNA as (non-editable). That way scripts can
obtain name, preview icon and asset-data.
Part of the first Asset Browser milestone. Check the #asset_browser_milestone_1
project milestone on developer.blender.org.
Differential Revision: https://developer.blender.org/D9724
Reviewed by: Bastien Montagne
* Avoid direct access to `SpaceFile.params`, use a getter instead. This matters
because once the asset-browser changes are in, there will be an alternative
selection parameter object. The getter can return the correct one.
* Rename the function to ensure the parameters. The old name
`ED_fileselect_get_params()` wasn't a mere getter, it would create the
parameters if necessary. Now we have an actual getter, so better be clear.
* In some instances, I replaced the old "get" function with the new mere
getter. So the ensure logic is called less often. However, in these cases we
should be able to assume the selection parameters were created already as
part of the editor creation routine.
The term "active" in the new function names may seem a bit odd in the current
context, but that is a preparation for the Asset Browser merge as well. Like
said, there will be two file selection parameter objects in the space.
`WM_operator_properties_filesel()` allows C operators to set a display or sort
type for the File Browser to use. But the File Browser would always override
that because of an invalid `_is_set()` check. (The operators don't actually set
the value, they only set the property's default value.)
The only operator affected by this is "Recover Auto Save". It is supposed to
show a vertical list ordered chronologically. It used settings from the
previous File Browser usage before this patch.
Operators using the File Browser should generally use
`FILE_DEFAULTDISPLAY`/`FILE_SORT_DEFAULT` now, except if they have a reason not
to. See comments at their definition.
----
This makes it so operators that set a different display or sort type
don't change the sort or display type for the next File Browser operation.
So using "Recover Auto Save" entirely isolates display and sort type from other
operations.
Differential Revision: https://developer.blender.org/D8598
Reviewed by: Bastien Montagne
While there are other bundles which show up as directories,
`.app` are the most common ones.
*Users should not be saving anything inside .app bundles, nor using
Blender to edit any of the files.
*This declutters the File Browser for say ~/Applications folder
or recursive search on a path with apps.
*Matches Finder's behavior of showing apps as files. (We don't have a
"right click > show package contents" button like Finder though)
This change shows `.app` files like incompatible files, or `.exe`s
on Windows.
{F8970986}
Reviewed By: #platform_macos, brecht, mont29
Differential Revision: https://developer.blender.org/D9162
`targetIsDirectory` slipped through the code review of
{D6679}/{rBafb1a64ccb81}.
`BLI_is_dir` exists to check for directory status of a file.
Remove some `else-after-return`s.
Use `r_` prefix for return value arguments, and move it to the end
in the list of arguments.
Adds support for Windows Shell Links (shortcuts) to the File Browser. Extended Mac Alias usage. Better visualization of linked items.
Differential Revision: https://developer.blender.org/D7380
Reviewed by Campbell Barton
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
Tasks: move priority from task to task pool {rBf7c18df4f599fe39ffc914e645e504fcdbee8636}
Tasks: split task.c into task_pool.cc and task_iterator.c {rB4ada1d267749931ca934a74b14a82479bcaa92e0}
Differential Revision: https://developer.blender.org/D7385
This adds support for macOS aliases in addition to symlinks. It also adds
support for hidden, readonly and system file attributes.
Contributed by Ankit (ankitm) with modifications by me.
Differential Revision: https://developer.blender.org/D6679
Mpving utils from idcode to idtype proved to be somewhat painful for
some reasons, but now all looks good.
Had to add a fake/empty shell for the special snowflake too,
`ID_LINK_PLACEHOLDER/INDEX_ID_NULL`...
Owner of filelisting job was changed, without proper update of all
access/usages of that owner to reach the job, leading to failure of
timer removal from the WM, and attempt to double-free the job...
Caused by rB2c4dfbb00246ff.
This started happening after changing filter ID to 64 bit in rB2841b2be3949,
however there was a pre-existing error here in the comparison to detect updates
to filter flags.
Adding more Windows special folder locations, used when browsing or bookmarking.
Differential Revision: https://developer.blender.org/D7014
Reviewed by Brecht Van Lommel
