It was broken in two ways:
- bpy_bmlayercollection_iter passed PY_SSIZE_T_MIN, while
PY_SSIZE_T_MAX was needed.
- bpy_bmlayercollection_subscript_slice() contained an
off-by-one error.
Pull Request: blender/blender#107165
Changes to [0] which worked as intended but used confusing naming.
- The note on using -1 for the active layer causes an assertion.
- The doc-string was above the wrong function.
- The meaning of the `_n()` suffix was flipped,
where the `layer_index_n` refers to an absolute index across all
layer types which is done internally for an index calculated from the
`layer` argument, not the argument it's self which is a UV index.
Rename BM_uv_map_get_offsets_n to BM_uv_map_get_offsets_from_layer.
[0]: 412b6a8f65
When accessing UVmaps from python in BMesh, the UVmap name/index was ignored
and the active UVmap always used. This fixes this by passing the layer index
to the underlying CustomData function.
Pull Request: blender/blender#106537
The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
Function casts hid casting between potentially incompatible type
signatures (using int instead of Py_ssize_t). As it happens this seems
not to have caused any bugs on supported platforms so this change is
mainly for correctness and to avoid problems in the future.
Missed these changes in [0].
Also replace designated initializers in some C code, as it's not used
often and would need to be removed when converting to C++.
[0] e555ede626
Use struct identifiers in comments before the value.
This has some advantages:
- The struct identifiers didn't mix well with other code-comments,
where other comments were wrapped onto the next line.
- Minor changes could re-align all other comments in the struct.
- PyVarObject_HEAD_INIT & tp_name are no longer placed on the same line.
Remove overly verbose comments copied from PyTypeObject (Python v2.x),
these aren't especially helpful and get outdated.
Also corrected some outdated names:
- PyTypeObject.tp_print -> tp_vectorcall_offset
- PyTypeObject.tp_reserved -> tp_as_async
The previous docs for `normal_update` methods of `BMVert`, `BMEdge`,
`BMFace`, and `BMesh` were not clear on some behaviors. These
behaviors are listed in D14370. This commit updates the docs to be
clearer.
Reviewed By: Blendify
Differential Revision: https://developer.blender.org/D14370
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
This simply adds access to the vertex crease layer from Python
code. Documentation was modified to remove "Edge" as it is
shared between edges and vertices, similarly to bevel weights.
Differential Revision: https://developer.blender.org/D14605
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
This patch adds edge selection support for UV editing (refer T76545).
Developed as a part of GSoC 2021 project - UV Editor Improvements.
Previously, selections in the UV editor always flushed down to vertices
and this caused multiple issues such as T76343, T78757 and T26676.
This patch fixes that by adding edge selection support for all UV
operators and adding support for flushing selections between vertices
and edges. Updating UV select modes is now done using a separate
operator, which also handles select mode flushing and undo for UV
select modes. Drawing edges (in UV edge mode) is also updated to match
the edit-mesh display in the 3D viewport.
Notes on technical changes made with this patch:
* MLOOPUV_EDGESEL flag is restored (was removed in rB9fa29fe7652a).
* Support for flushing selection between vertices and edges.
* Restored the BMLoopUV.select_edge boolean in the Python API.
* New operator to update UV select modes and flushing.
* UV select mode is now part of editmesh undo.
TODOs added with this patch:
* Edge support for shortest path operator (currently uses vertex path logic).
* Change default theme color instead of reducing contrast with edge-select.
* Proper UV element selections for Reveal Hidden operator.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12028
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Negative indices that remained negative after adding the sequence length
caused incorrect slicing.
With the default scene for example:
bpy.context.scene.objects[-4:2]
Gave a different result to:
tuple(bpy.context.scene.objects)[-4:2]
Clamp indices above zero so loops that step forward works as intended.
Using BMesh operators through the edit-mesh API created a full copy
of the mesh so it was possible to restore the mesh in case
one of the operators raised an error.
Remove support for automatic backup/restore from the EDBM_op_* API's
as it adds significant overhead and was rarely used.
Operators that need this can use the BMBackup API to backup & restore
the mesh in case of failure.
Add warning levels to BMO_error_raise so operators can report problems
without it being interpreted as a request to cancel the operation.
For high-poly meshes creating and freeing a full copy is an expensive
operation, removing this gives a speedup of ~1.77x for most operators
except for "connect_verts" / "connect_vert_pair"
which still uses this functionality.
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
