This was broken even before 0649e63716 and was always expanding the
`Image`, not the movie clip (even if the source was set to
`CAM_BGIMG_SOURCE_MOVIE`)
Now the rule here seems to be to always expand unconditionally, so
remove checking the source and always expand image and movie clip.
Co-authored-by: Philipp Oeser <philipp@blender.org>
Pull Request #104815
The bug is caused by rBb66b3f547c43e841a7d5da0ecb2c911628339f56.
From what I can see, that fix was intended to enable manual lens shift for
panorama cameras, but it appears that it also unintentionally applies
interocular shift.
This fix disables the multiview shift for panorama cameras, that way manual lens
shift still works but we get the 2.x behavior for stereoscopic renders back.
Differential Revision: https://developer.blender.org/D16950
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
This is useful when using an armature as a camera rig, to avoid creating and
targetting an empty object.
Differential Revision: https://developer.blender.org/D7012
The camera frame (used for selection) was drawn outside the near
clipping plane in those cases.
This has been an issue before as seen in the following commits:
- rB6e7e6832e87
- rB33d322873e6
- rB4f9451c0442
Remaining issue was that the code which ensure the frame isn't behind
the near clipping plane was not taking into account the camera could be
scaled (in Z).
A caller of `BKE_camera_view_frame_ex` (namely
`OVERLAY_camera_cache_populate`) applies scale (also on the depth) which
does not play well with the way `BKE_camera_view_frame_ex` did it.
Now take Z scale into account.
Ref D15178
Add support for adding (inserting) new background images into an
override of a linked Camera ID.
Request from the Blender studio.
This ended up being more involved than expected as it uncovered some
latent issues with existing background images code. Noticiably, a new
`BKE_camera_background_image_copy` had to be added to handle copying
of background images in a proper, generic ID-management way.
The internal camera used to render the thumbnails also has to consider
`clip_start` and `clip_end`.
Reviewed By: Severin
Maniphest Tasks: T95678
Differential Revision: https://developer.blender.org/D14138
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Some doc-strings were skipped because of blank-lines between
the doc-string and the symbol and needed to be moved manually.
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
Ref T92709
- Added space below non doc-string comments to make it clear
these aren't comments for the symbols directly below them.
- Use doxy sections for some headers.
- Minor improvements to doc-strings.
Ref T92709
The main goal of this refactor is to make BPath module use `IDTypeInfo`,
and move each ID-specific part of the `foreach_path` looper into their
own IDTypeInfo struct, using a new `foreach_path` callback.
Additionally, following improvements/cleanups are included:
* Attempt to get better, more consistent namings.
** In particular, move from `path_visitor` to more standard `foreach_path`.
* Update and extend documentation.
** API doc was moved to header, according to recent discussions on this
topic.
* Remove `BKE_bpath_relocate_visitor` from API, this is specific
callback that belongs in `lib_id.c` user code.
NOTE: This commit is expected to be 100% non-behavioral-change. This
implies that several potential further changes were only noted as
comments (like using a more generic solution for
`lib_id_library_local_paths`, addressing inconsistencies like path of
packed libraries always being skipped, regardless of the
`BKE_BPATH_FOREACH_PATH_SKIP_PACKED` `eBPathForeachFlag` flag value,
etc.).
NOTE: basic unittests were added to master already in
rBdcc500e5a265093bc9cc.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13381
Two issues addressed here:
I) `asset_type_info` is sub-data, not a callback. Therefore, move it
before the callbacks in the `IDTypeInfo` struct.
II) More important, initialize this new attribute in *ALL* `IDTypeInfo`
instances. No member of this struct should ever be left implicitely
uninitilazed, ever.
Aftermath of rBa84f1c02d251.
Previously, `ImageTile->ok` and `ImageUser->ok` were used to indicate
whether an image failed to load. There were three possible values
which (probably) had the following meanings:
* `0`: There was an error while loading the image. Don't try to load again.
* `1`: Default value. Try to load the image.
* `2`: The image was loaded successfully.
This image-wide flag did not make sense unfortunately, because loading
may work for some frames of an image sequence but not for others.
Remember than an image data block can also contain a movie.
The purpose of the `->ok` flag was to serve as an optimization to avoid
trying to load a file over and over again when there is an error (e.g. the
file does not exist or is invalid). To get the optimization back, the patch
is changing `MovieCache` so that it can also cache failed load attempts.
As a consequence, `ibuf` is allowed to be `NULL` in a few more places.
I added the appropriate null checks.
This also solves issues when image sequences are used with the
Image Texture node in Geometry nodes (also see D12827).
Differential Revision: https://developer.blender.org/D12957
This commit adds to ID struct a new optional 'weak reference' to a
linked ID (in the form of a blend file library path and full ID name).
This can then be used on next append to try to find a matching local ID
instead of re-making the linked data local again.
Ref. T90545
NOTE: ID re-use will be disabled for regular append for the time being
(3.0 release), and only used for assets. Therefore, this commit should
not change anything user-wise.
Differential Revision: https://developer.blender.org/D12545
This was not really useful, and added estra useless steps in case and ID
should not actually be written.
Further more, it prevented clearing the usercount on write, which can be
cause a false positive 'chanhged' detection in undo/redo case.
This concerns currently only collections (`master_collection` of scenes)
and root node trees. It removes the matching type-specific helpers
(`BKE_collection_master_scene_search` and `BKE_node_tree_find_owner_ID`).
No functional change expected here.
NOTE: Current implementation of `owner_get` is far from optimal, we
could probably do it better, see {T69169}.
NOTE: While it could also have it, shapekeys IDTypeInfo was left out of
this change for now. Mainly because it sould not be used currently, and
we ultimately want to demote shape keys from ID status anyway.
Currently this is needed to properly tag PointCache's for info update
(fixes an issue reported in T82503).
Suspect we may need this in more cases in the future though, RNA
assign/update processes are not always 100% enough to deal with
complicated corner cases.
This is essentially adding that new callback, and using it only for already
existing Scene's 3DCursor.
Note that the place where this is called has been moved again, after all
have been lib-linked, such that those callbacks may also work on ID pointers.
Maniphest Tasks: T71759
Differential Revision: https://developer.blender.org/D9237
Better use higher-level code from common ID management when possible.
Helps to de-duplicate logic, and reduces outside usages of more
'dangerous' functions.
Note that we could get rid of many of those `BKE_<id_type>_add`
functions now, but on the other hand several of those take extra
parameters and perform additional actions, so think we can keep them all
for now as 'non-standard ID specific creation functions'.
Those were only shallow wrappers around `BKE_id_copy`, barely used (even
fully unused in some cases), and we want to get rid of those ID-specific
helpers for the common ID management tasks. Also prevents weird custom
behaviors (like `BKE_object_copy`, who was the only basic ID copy
function to reset user count of the new copy to zero).
Part of 71219.
This is part of T76372.
It adds the `blend_write`, `blend_read_data`, `blend_read_lib`
and `blend_read_expand` which correspond to the various
steps when reading and writing .blend files.
Having these callbacks allows us to decentralize the blenloader
code a lot more. This has the affect that code related to any
specific ID type is less scattered.
Reviewers: mont29
Differential Revision: https://developer.blender.org/D8670
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The `BKE_animsys.h` and `anim_sys.c` files already had a an "AnimData
API" section. The code in that section has now been split off, and
placed into `BKE_anim_data.h` and `anim_data.c`.
All files that used to include `BKE_animsys.h` have been adjusted to
only include the animation headers they need (sometimes none).
No functional changes.
