This was the case when using the operator outside of the modifiers panel.
Caused by {rBeae36be372a6}.
In above commit, `DT_layer_items` shared both `DT_TYPE_MPROPCOL_LOOP` |
`DT_TYPE_MLOOPCOL_LOOP` in a single EnumPropertyItem value "Colors".
This is a bit unusual, but probably allowed.
As a consequence, checks for specific datatypes would fail when selecting
such EnumPropertyItem:
- `DT_DATATYPE_IS_MULTILAYERS` (uses `ELEM` to check distinct entries --
would return false)
- `BKE_object_data_transfer_dttype_to_srcdst_index` (would return
`DT_MULTILAYER_INDEX_INVALID`)
These places have now been corrected to take these "special" values into
account.
Another issue was that multiple EnumPropertyItems with the same value
could be created in dt_add_vcol_layers() if attributes of the same
domain, but different color types are in play (could lead to crashes)
and that has also been corrected.
Also: above commit did not give the choice of transfering color
attributes from the vertex domain (only face corner attributes could be
chosen), this has now been added. DT_layer_vert_items (used from the
modifier) already had this included so this was only an issue when using
the operator outside of the modifiers panel.
Since we now feature two domains, the single "VCOL" in the enum has been
split into "COLOR_VERTEX" and "COLOR_CORNER". This will break existing
scripts calling bpy.ops.object.datalayout_transfer and will be marked as
a breaking change in the release notes.
NOTE: there is another bug here when attributes of the same domain, but
different color types are in play and you want to transfer just a single
specific layer (but that is for a separate commit)
Maniphest Tasks: T103400
Differential Revision: https://developer.blender.org/D16935
Currently the `MLoopUV` struct stores UV coordinates and flags related
to editing UV maps in the UV editor. This patch changes the coordinates
to use the generic 2D vector type, and moves the flags into three
separate boolean attributes. This follows the design in T95965, with
the ultimate intention of simplifying code and improving performance.
Importantly, the change allows exporters and renderers to use UVs
"touched" by geometry nodes, which only creates generic attributes.
It also allows geometry nodes to create "proper" UV maps from scratch,
though only with the Store Named Attribute node for now.
The new design considers any 2D vector attribute on the corner domain
to be a UV map. In the future, they might be distinguished from regular
2D vectors with attribute metadata, which may be helpful because they
are often interpolated differently.
Most of the code changes deal with passing around UV BMesh custom data
offsets and tracking the boolean "sublayers". The boolean layers are
use the following prefixes for attribute names: vert selection: `.vs.`,
edge selection: `.es.`, pinning: `.pn.`. Currently these are short to
avoid using up the maximum length of attribute names. To accommodate
for these 4 extra characters, the name length limit is enlarged to 68
bytes, while the maximum user settable name length is still 64 bytes.
Unfortunately Python/RNA API access to the UV flag data becomes slower.
Accessing the boolean layers directly is be better for performance in
general.
Like the other mesh SoA refactors, backward and forward compatibility
aren't affected, and won't be changed until 4.0. We pay for that by
making mesh reading and writing more expensive with conversions.
Resolves T85962
Differential Revision: https://developer.blender.org/D14365
Add missing labels, and also add tooltips.
Unfortunately there is no way currently to extract two messages from a
single 'function' call, so unless those type of macros become very
widely used, would keep it as manual tagging.
Also disambiguate `case` in text context, pretty sure English is one of
the very rare languages to use this word for character case too.
Add the following macros for enums as support for these features wasn't
all that obvious and there were some inconsistencies in their use.
- RNA_ENUM_ITEM_HEADING(name, description)
- RNA_ENUM_ITEM_SEPR
- RNA_ENUM_ITEM_SEPR_COLUMN
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
The operator could crash in case the context "object" was overridden
from python, but the "active_object" wasnt (and the active object was
not a mesh).
Reason for the crash is a mismatch in the operators poll function
`data_transfer_poll` vs. `dt_layers_select_src_itemf` -- in the former,
the overriden "object" was respected (and if this was a mesh, the poll
was permissive), in the later it wasnt and only the "active_object" was
used (if this was not a mesh, a crash would happen trying to get an
evaluated mesh).
Now rectify how the object which is used is being fetched -> use
`ED_object_active_context` everywhere (see also rBe560bbe1d584).
Maniphest Tasks: T96888
Differential Revision: https://developer.blender.org/D14552
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
Add new `BKE_id_is_editable` helper in `BKE_lib_id.h`, that supercedes
previous check (simple `ID_IS_LINKED()` macro) for many editing cases.
This allows to also take into account 'system override' (aka
non-editable override) case.
Ref: {T95707}.
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
The strings in the `get_description` functions for operators need
translation, they are not found by the translation system automatically,
and there is no translation applied afterwards either (as far as I could
tell). Some used `N_` before, but most did nothing.
Differential Revision: https://developer.blender.org/D14011
Swap "active" and "selected" in the tooltip if the `use_reverse_transfer`
option is activated.
Reviewed By: mont29
Maniphest Tasks: T85233
Differential Revision: https://developer.blender.org/D13499
We need to be more strict about trying to retrieve a list of vertex group
names from objects now, as only three object types support them.
This commit adds a check for vertex group support in a few places, the
data transfer operator/modifier, copying vertex groups to selected
objects, and the vertex group remove and clear functions.
Differential Revision: https://developer.blender.org/D11947
This commit moves the storage of `bDeformGroup` and the active index
to `Mesh`, `Lattice`, and `bGPdata` instead of `Object`. Utility
functions are added to allow easy access to the vertex groups given
an object or an ID.
As explained in T88951, the list of vertex group names is currently
stored separately per object, even though vertex group data is stored
on the geometry. This tends to complicate code and cause bugs,
especially as geometry is created procedurally and tied less closely
to an object.
The "Copy Vertex Groups to Linked" operator is removed, since they
are stored on the geometry anyway.
This patch leaves the object-level python API for vertex groups in
place. Creating a geometry-level RNA API can be a separate step;
the changes in this commit are invasive enough as it is.
Note that opening a file saved in 3.0 in an earlier version means
the vertex groups will not be available.
Differential Revision: https://developer.blender.org/D11689
Warnings in tooltips were using inconsistent formatting, some in
parantheses, some not, some in caps, others not, some on new lines,
some not, etc.
This patch uses a consistent new line and no capitals for these cases.
Differential Revision: https://developer.blender.org/D9904
Changes include using proper and consistent grammar, simplifying
phrasing, using correct terminology, and not including python API
identifiers in tooltips.
Differential Revision: https://developer.blender.org/D9924
This commit adds functions to set and get the object's active
modifier, which is stored as a flag in the ModifierData struct,
similar to constraints. This will be used to set the context in
the node editor. There are no visible changes in this commit.
Similar to how the node editor context works for materials, this commit
makes the node group displayed in the node editor depend on the active
object and its active modifier. To keep the node group from changing,
just pin the node group in the header.
* Shortcuts performed while there is an active modifier will affect
only that modifier (the exception is the A to expand the modifiers).
* Clicking anywhere on the empty space in a modifier's panel will make it active.
These changes require some refactoring of object modifier code. First
is splitting up the modifier property invoke callback, which now needs
to be able to get the active modifier separately from the hovered
modifier for the different operators.
Second is a change to removing modifiers, where there is now a separate
function to remove a modifier from an object's list, in order to handle
changing the active.
Finally, the panel handler needs a small tweak so that this "click in panel"
event can be handled afterwards.
Some modes were working by mere chance in that ugly 'reversed' case, but
the to/from selection modes were not properly swapped...
Should also be safe for 2.83.
See rB1fa40c9f8a81 for more details. The implementation is the same.
The only difference to the mesh modifier commit is a slight rework of
edit_modifier_invoke_properties in order to pass through to check for
other keymap items with the same shortcut.
The shortcuts act on the modifier with its panel under the mouse.
The following shortcuts are enabled by default:
- Remove modifier: X, Delete
- Apply modifier: Ctrl A
- Duplicate modifier: Shift D
More shortcuts can be added in the keymap.
Each panel can now store a custom data RNA pointer, and a new
function is added to get the custom data for the panel under the
cursor. This custom data could be used to refactor the "List Panel
System" to generalize it and integrate it further with RNA.
The same functionality will be added in further commits where it
applies to constraints, grease pencil modifiers, and effects.
Differential Revision: https://developer.blender.org/D8031
This change ensures that operators which needs access to evaluated data
first makes sure there is a dependency graph.
Other accesses to the dependency graph made it more explicit about
whether they just need a valid dependency graph pointer or whether they
expect the graph to be already evaluated.
This replaces OPTYPE_USE_EVAL_DATA which is now removed.
Some general rules about usage of accessors:
- Drawing is expected to happen from a fully evaluated dependency graph.
There is now a function to access it, which will in the future control
that dependency graph is actually evaluated.
This check is not yet done because there are some things to be taken
care about first: for example, post-update hooks might leave scene in
a state where something is still tagged for update.
- All operators which needs to access evaluated state must use
CTX_data_ensure_evaluated_depsgraph().
This function replaces OPTYPE_USE_EVAL_DATA.
The call is generally to be done in the very beginning of the
operator, prior other logic (unless this is some comprehensive
operator which might or might not need access to an evaluated state).
This call is never to be used from a loop.
If some utility function requires evaluated state of dependency graph
the graph is to be passed as an explicit argument. This way it is
clear that no evaluation happens in a loop or something like this.
- All cases which needs to know dependency graph pointer, but which
doesn't want to actually evaluate it can use old-style function
CTX_data_depsgraph_pointer(), assuming that underlying code will
ensure dependency graph is evaluated prior to accessing it.
- The new functions are replacing OPTYPE_USE_EVAL_DATA, so now it is
explicit and local about where dependency graph is being ensured.
This commit also contains some fixes of wrong usage of evaluation
functions on original objects. Ideally should be split out, but in
reality with all the APIs being renamed is quite tricky.
Fixes T67454: Blender crash on rapid undo and select
Speculation here is that sometimes undo and selection operators are
sometimes handled in the same event loop iteration, which leaves
non-evaluated dependency graph.
Fixes T67973: Crash on Fix Deforms operator
Fixes T67902: Crash when undo a loop cut
Reviewers: brecht
Reviewed By: brecht
Subscribers: lichtwerk
Maniphest Tasks: T67454
Differential Revision: https://developer.blender.org/D5343
Some modifier operators cannot be reliably executed from Edit mode
currently, so disable them from the generic mod ops pool function.
Have been very conservative here from now, keeping existing behavior
most of the time, and only forbidding Edit mode when code was already
doing it in its own way, or when it was obviously not possible.
When the modifier uses vertex groups, the set of the bones it actually
needs is precisely defined by the set of the group names. If envelopes
are enabled, this refinement is not available, because any bone can
potentially be used.
This can be used in the dependency graph construction to allow objects
deformed by a part of the armature to be used in constraints on other
bones, e.g. for placing cartoon-style face elements on top of the body
mesh via Shrinkwrap constraints.
Since the list of vertex group names is now used as an input by
the dependency graph, adding/removing/renaming groups should now
be triggering a graph rebuild.
Differential Revision: https://developer.blender.org/D4715
Behavior of source/destination options was rather flaky in reversed
mode...
Note that even though this mode is a bit annoying and cumbersome, the
only alternative (defining a specific transfer weight operator) would be
much more verbose, so think that for now we'd rather keep what we have
here.
We already have different storages for cddata of verts, edges etc.,
'simply' do the same for the mask flags we use all around Blender code
to request some data, or limit some operation to some layers, etc.
Reason we need this is that some cddata types (like Normals) are
actually shared between verts/polys/loops, and we don’t want to generate
clnors everytime we request vnors!
As a side note, this also does final fix to T59338, which was the
trigger for this patch (need to request computed loop normals for
another mesh than evaluated one).
Reviewers: brecht, campbellbarton, sergey
Differential Revision: https://developer.blender.org/D4407
