This patch adds the core realtime compositor evaluator as well as a
compositor draw engine powered by the evaluator that operates in the
viewport. The realtime compositor is a new GPU accelerated compositor
that will be used to power the viewport compositor imminently as well as
the existing compositor in the future.
This patch only adds the evaluator and engine as an experimental
feature, the implementation of the nodes themselves will be committed
separately.
See T99210.
Differential Revision: https://developer.blender.org/D15206
Reviewed By: Clement Foucault
openSubdiv_init() would detect available evaluators before any OpenGL context
exists, causing a crash with libepoxy. This test however is redundant as we
already check the requirements on the Blender side through the GPU API.
To simplify things, completely remove the device detection in the opensubdiv
module and reduce the evaluators to just CPU and GPU. The plan here is to move
to the GPU module abstraction over OpenGL/Metal/Vulkan and so all these
different backends no longer make sense.
This also removes the user preference for OpenSubdiv compute device, which was
not used for the new GPU subdivision implementation.
Ref D15291
Differential Revision: https://developer.blender.org/D15470
* Don't nest "Show Recent Locations" and "Show System Locations" under a
"Defaults" heading. They are not just a default setting but completely
hide panels from the UI.
* Use own "Show Locations" heading instead, and remove redundant words
from labels.
* Move the options to the top of the panel, they are more general since
they can't be toggled in a File Browser session, and thus have bigger
impact.
We may want to remove these options in a future major release, I don't
think they are useful.
Agreed on with Pablo Vazquez.
This is temporary to investigate which behavior should be kept when
creating an override hierarchy if there are no cherry-picked data
defined: make all overrides user-editable, or not.
This removes the 'make override - fully editable' menu entries.
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
It can be assumed that all scripts comply with basic pep8 formatting
regarding white-space, indentation etc.
Also remove note in best practices page & update `tests/python/pep8.py`.
If we want to exclude some scripts from make format,
this can be done by adding them to `ignore_files` in:
source/tools/utils_maintenance/autopep8_format_paths.py
Or using `# nopep8` for to ignore for individual lines.
Ref T98554
The acquire locking of the draw manager introduced other issues.
The current implementation was a hacky solution as we know that the
final solution is something totally different {T98016}.
Related issues:
* {T97988}
* {T97600}
Now there are two experimental feature options:
* "New Curves Type": Enables the new data type and a couple of tools
that are meant to be in the first release that comes with the new curves object.
* "New Curves Tools": This is only available when the new curve type is available
as well. It mainly exists to keep some tools experimental even after the initial
curves object is release officially.
* For now this only includes the curves edit mode which is not usable yet and
probably won't be for the initial release.
Differential Revision: https://developer.blender.org/D14840
Unlike regular selection cycling that is activated when clicking again
in the same location, object mode would cycle to another object
if the object that was selected happened to already be active.
This made it impossible to click-drag to tweak the active object
if there were other objects behind it as those would be activated first.
Resolves T96752.
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
Add a new panel called "Tweaks" so we can get feedback from users
about minor tweaks to behavior as exposing these minor changes.
Currently this only has a single item in it, however we may want to
get feedback from users about small changes in the future so I'd
prefer to have a place to list these kinds of options.
Ref D14542
This only adds a experimental flag to enable the 3d texturing brush,
so future developments could check. Currently the flag does nothing
as no functionality of the 3d texturing brush has been implemented.
Object mode selection does a kind of cycling that excludes the active
selected object. This is separate from regular selection cycling which
is enabled when clicking multiple times without moving the cursor.
This has the down-side that clicking on an object to drag it always
selects the object behind it (in the case of overlapping objects).
Since object mode selection is fundamental functionality, this is
exposed as an experimental preference for user feedback & testing.
See T96752 for details.
This is supposed to hold the latest improvement from the EEVEE rewrite branch.
Note that a restart is necessary in order for the engine to appear.
The registration code is a bit convoluted as it needs to be after the WM_init.
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
Based on discussions from T95355 and T94193, the plan is to use
the name "Curves" to describe the data-block container for multiple
curves. Eventually this will replace the existing "Curve" data-block.
However, it will be a while before the curve data-block can be replaced
so in order to distinguish the two curve types in the UI, "Hair Curves"
will be used, but eventually changed back to "Curves".
This patch renames "hair-related" files, functions, types, and variable
names to this convention. A deep rename is preferred to keep code
consistent and to avoid any "hair" terminology from leaking, since the
new data-block is meant for all curve types, not just hair use cases.
The downside of this naming is that the difference between "Curve"
and "Curves" has become important. That was considered during
design discussons and deemed acceptable, especially given the
non-permanent nature of the somewhat common conflict.
Some points of interest:
- All DNA compatibility is lost, just like rBf59767ff9729.
- I renamed `ID_HA` to `ID_CV` so there is no complete mismatch.
- `hair_curves` is used where necessary to distinguish from the
existing "curves" plural.
- I didn't rename any of the cycles/rendering code function names,
since that is also used by the old hair particle system.
Differential Revision: https://developer.blender.org/D14007
Now all proxies will always be converted to library overrides. If
conversion fails, they are simply 'disabled'.
This should be the last 'user-visible' step of proxies removal.
Remaining upcoming commits will remove internal ID management, depsgraph
and evaluation code related to proxies.
Also bump the blendfile subversion.
Part of T91671.
Adds an "Asset Indexing" option (enabled by default) to Preferences >
Experimental > Debugging. This is useful when working on the asset
library loading.
This evaluator is used in order to evaluate subdivision at render time, allowing for
faster renders of meshes with a subdivision surface modifier placed at the last
position in the modifier list.
When evaluating the subsurf modifier, we detect whether we can delegate evaluation
to the draw code. If so, the subdivision is first evaluated on the GPU using our own
custom evaluator (only the coarse data needs to be initially sent to the GPU), then,
buffers for the final `MeshBufferCache` are filled on the GPU using a set of
compute shaders. However, some buffers are still filled on the CPU side, if doing so
on the GPU is impractical (e.g. the line adjacency buffer used for x-ray, whose
logic is hardly GPU compatible).
This is done at the mesh buffer extraction level so that the result can be readily used
in the various OpenGL engines, without having to write custom geometry or tesselation
shaders.
We use our own subdivision evaluation shaders, instead of OpenSubDiv's vanilla one, in
order to control the data layout, and interpolation. For example, we store vertex colors
as compressed 16-bit integers, while OpenSubDiv's default evaluator only work for float
types.
In order to still access the modified geometry on the CPU side, for use in modifiers
or transform operators, a dedicated wrapper type is added `MESH_WRAPPER_TYPE_SUBD`.
Subdivision will be lazily evaluated via `BKE_object_get_evaluated_mesh` which will
create such a wrapper if possible. If the final subdivision surface is not needed on
the CPU side, `BKE_object_get_evaluated_mesh_no_subsurf` should be used.
Enabling or disabling GPU subdivision can be done through the user preferences (under
Viewport -> Subdivision).
See patch description for benchmarks.
Reviewed By: campbellbarton, jbakker, fclem, brecht, #eevee_viewport
Differential Revision: https://developer.blender.org/D12406
This adds the remaining bits to enable Metal on macOS. There are still
performance optimizations and other improvements planned, but it should
now be ready for early testing.
This is currently only enabled on in Arm builds for M1 GPUs. It is not
yet working on AMD or Intel GPUs.
Ref T92212
Differential Revision: https://developer.blender.org/D13503
Should be safe to do so now that 2.8+ has been out for 8 releases and over 2 years now.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12984
Intention of the icon is to mark add-ons that are official/bundled.
Doesn't make much sense to use the .blend file icon for that. It's
arguable if the Blender logo should be used for this, but the file icon
is definitely the wrong choice.
This feature has been desired for some time:
- https://rightclickselect.com/p/ui/Tqbbbc/allow-navigating-while-transforming (See comments);
- D1583;
- T37427;
In short, blocking navigation during transform limits the user to move the object only to visible areas within the screen and hinders the allocation of objects within closed meshes.
The node editor is also impaired because some nodes are far between them and the connectors are too small.
The only disadvantage of this patch (as I see it) is the conflict with the existing key map:
MIDDLEMOUSE:
- enable axis constrain in 3D view;
WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY:
- change the threshold of the proportional edit;
So the patch solution was to change these keymaps:
- MIDDLEMOUSE to Alt+MIDDLEMOUSE;
- WHEELDOWNMOUSE, WHEELUPMOUSE, PAGEUPKEY, PAGEDOWNKEY to Alt+(corresponding key);
When you use this new keymap for the first time in the proportional edit, it may seem strange due to the custom of using it (both in View2D and View3D).
But quickly the user gets used to it.
Alternatively we can add an option to the user preferences ([] Allow navigating while transforming). (I'm not much fan of this option).
The patch was done on branch2.8. But maybe it's a good idea to apply it to 2.79
Differential Revision: https://developer.blender.org/D2624
Add a new "experimental" debug option `show_asset_debug_info`, and use
that to determine the visibility of the active asset's catalog UUID and
simple name. Previously this was only determined by the "Developer
Extras" option, which meant it was visible in too many situations. It's
not really a "developer extra", and really just a debugging tool, so the
new option is more in line with its purpose.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13242
Support the ability to close relevant characters like '(', '[' and '{'.
It will also delete the pair character if they're empty.
Ref D13119
Reviewed By: campbellbarton
* Open File Browser when pressing "Add Asset Library". This just makes sense,
since users have to select a directory for the asset library anyway.
* Move '+' icon back to the right side of the box. Then it is right under the
'x' icons for each indivdual library, which seems like the more natural
place.
* Correct tooltip for the "Add Asset Library" operator.
* Mark empty asset library name or paths field in red, to make clear that these
need to be set.
Camera, lattice and speaker object types were missing there own proper
`USER_DUP_` flags, leading to not properly handling duplication of their
object data.
NOTE: We could probably simply opions here, by using categories (like
'GEOMETRY', 'SHADING', etc.) instead of exact object types. But this is
beyond bugfix scope.
