Originally was needed to reach easy way of defining masks used for tracking
(do eliminate textures which doesn't belong to feature when tracking.
Implemented as alternative to GP datablock for clip and added switch between
per-clip and per-track GP datablocks -- internal limitations of GP doesn't
allow to display all GP datablocks easily. So either you see.edit GP associated
with clip or with track.
GP strokes associated with track are relative to track's position, following
tracks during tracking and could be shared between several tracks.
Masking code presents in libmv and there's rasterizer of GP datablocks for
masks in blender's tracking module, but they still need to be glued together.
Some documentation cound be found at this page:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Motion_Tracker#Grease_Pencil
Issue was caused by do_versions being used pdata as reference for active/render/
stencil/clone layer indices instead of fdata.
Added some utility functions used only by do_versions to be sure this indices
are set from fdata for pre-bmesh files.
Now it's indicates at which scene frame number movie clip starts playing back.
This this setting is still belongs to clip datavlock and used by all users of
clip such as movie compositor nodes, constraints and so.
After long discussion and thoughts about this it was decided that this would
match image's current behavior (which initially seen a bit crappy), but that's
actually allows:
- Keep semantics of start frame in image and clip datablocks in sync
- Allows to support features like support of loading image sequences
with crappy numbers in suffix which doesn't fit long int.
- Allows to eliminate extra boolean checkbox to control such kind of offset.
Hopefully from pipeline POV it wouldn't hurt because idea of having this things
implemented in original way was working only if sequence before processing
started naming form 001.
========================
The linear and angular thresholds set the speed limit (in m/s) and rotation limit (in rad/s)
under which a rigid body will go to sleep (stop moving) if it stays below the limits for a
time equal or longer than the deactivation time (sleeping is disabled is deactivation time is
set to 0).
These settings help reducing the processing spent on Physics during the game.
Previously they were only accessible from python but not working because of a bug.
Now the python functions are working and the settings are available in the Physics panel
of the World settings when using the Blender Game render engine.
Python API:
import PhysicsConstraints
PhysicsConstraints.setDeactivationLinearTreshold(float)
PhysicsConstraints.setDeactivationAngularTreshold(float)
* Remove all code for Texture and Sequencer plugin system, this never worked in 2.5x / 2.6x and is therefore not needed anymore.
* DNA structures are kept, all read/writefile code is gone.
Detail: Smoke solver and Blender side of smoke now share the same cell length.
First reported by the Sintel artists long ago, again reported by MiikaH.
Part of my Smoke Development Project Phase III.
For an detailed user-level description of new features see the following blogpost:
http://code.blender.org/index.php/2012/05/node-editing-tweaks/
TL;DR:
* Frame node gets more usable bounding-box behavior
* Node resizing has helpful mouse cursor indicators and works on all borders
* Node selection/active colors are themeable independently
* Customizable background colors for nodes (useful for frames visual
distinction).
Averages input samples to make the brush stroke smoother. Only mouse
location is averaged right now, not pressure/tilt/etc.
The DNA is in struct Paint.num_input_samples, RNA is
Paint.input_samples. In combination with PaintStroke usage this change
applies to sculpt, vpaint, and wpaint.
The range of useful values varies quite a bit depending on input
device; mouse needs higher values to match tablet pen, so set max
samples pretty high (64).
Release note section:
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Sculpting#Input_Stroke_Averaging
Displaying image layers with flattened names (render_layer.render_pass) can lead to extremely long socket lists, especially with older files that were used with distinct render layers before. In general the flattening of names would be preferable, but it needs a sensible way of limiting the number of displayed outputs. For now the render layer dropdown selection is the best option to ensure usability.
`````|````` | | | ..''''
| | | |______ .''
| | | | ..'
| | |_______ |___________ ....''
merge to TRUNK!
* The old compositor is still available (Debug Menu: 200)
This commit was brought to you by:
Developers:
* Monique Dewanchand
* Jeroen Bakker
* Dalai Felinto
* Lukas Tönne
Review:
* Brecht van Lommel
Testers:
* Nate Wiebe
* Wolfgang Faehnle
* Carlo Andreacchio
* Daniel Salazar
* Artur Mag
* Christian Krupa
* Francesco Siddi
* Dan McGrath
* Bassam Kurdali
But mostly by the community:
Gold:
Joshua Faulkner
Michael Tiemann
Francesco Paglia
Blender Guru
Blender Developers Fund
Silver:
Pablo Vazquez
Joel Heethaar
Amrein Olivier
Ilias Karasavvidis
Thomas Kumlehn
Sebastian Koenig
Hannu Hoffrén
Benjamin Dansie
Fred M'ule
Michel Vilain
Bradley Cathey
Gianmichele Mariani
Gottfried Hofmann
Bjørnar Frøyse
Valentijn Bruning
Paul Holmes
Clemens Rudolph
Juris Graphix
David Strebel
Ronan Zeegers
François Tarlier
Felipe Andres Esquivel Reed
Olaf Beckman
Jesus Alberto Olmos Linares
Kajimba
Maria Figueiredo
Alexandr Galperin
Francesco Siddi
Julio Iglesias Lopez
Kjartan Tysdal
Thomas Torfs
Film Works
Teruyuki Nakamura
Roger Luethi
Benoit Bolsee
Stefan Abrahamsen
Andreas Mattijat
Xavier Bouchoux
Blender 3D Graphics and Animation
Henk Vostermans
Daniel Blanco Delgado
BlenderDay/2011
Bradley Cathey
Matthieu Dupont de Dinechin
Gianmichele Mariani
Jérôme Scaillet
Bronze (Ivo Grigull, Dylan Urquidi, Philippe Derungs, Phil Beauchamp, Bruce Parrott, Mathieu Quiblier, Daniel Martinez, Leandro Inocencio, Lluc Romaní Brasó,
Jonathan Williamson, Michael Ehlen, Karlis Stigis, Dreamsteep, Martin Lindelöf, Filippo Saracino, Douwe van der Veen, Olli Äkräs, Bruno D'Arcangeli,
Francisco Sedrez Warmling, Watchmike.ca, peter lener, Matteo Novellino, Martin Kirsch, Austars Schnore, KC Elliott, Massimiliano Puliero, Karl Stein,
Wood Design Studios, Omer Khan, Jyrki Kanto, Michał Krupa, Lars Brubaker, Neil Richmond, Adam Kalisz, Robert Garlington, Ian Wilson, Carlo Andreacchio,
Jeremias Boos, Robert Holcomb, Gabriel Zöller, Robert Cude, Natibel de Leon, Nathan Turnage, Nicolas Vergnes, Philipp Kleinhenz, Norman Hartig, Louis Kreusel,
Christopher Taylor, Giovanni Remondini, Daniel Rentzsch, Nico Partipilo, Thomas Ventresco, Johannes Schwarz, Александр Коротеев, Brendon Harvey,
Marcelo G. Malheiros, Marius Giurgi, Richard Burns, Perttu Iso-Metsälä, Steve Bazin, Radoslav Borisov, Yoshiyuki Shida, Julien Guigner, Andrew Hunter,
Philipp Oeser, Daniel Thul, Thobias Johansson, Mauro Bonecchi, Georg Piorczynski, Sebastian Michailidis, L M Weedy, Gen X, Stefan Hinze, Nicolò Zubbini,
Erik Pusch, Rob Scott, Florian Koch, Charles Razack, Adrian Baker, Oliver Villar Diz, David Revoy, Julio Iglesias Lopez, Coen Spoor, Carlos Folch,
Joseph Christie, Victor Hernández García, David Mcsween, James Finnerty, Cory Kruckenberg, Giacomo Graziosi, Olivier Saraja, Lars Brubaker, Eric Hudson,
Johannes Schwarz, David Elguea, Marcus Schulderinsky, Karel De Bruijn, Lucas van Wijngaarden, Stefano Ciarrocchi, Mehmet Eribol, Thomas Berglund, Zuofei Song,
Dylan Urquidi )
--- Changes to File Output node ---
* Flat layer names in EXR multilayer files.
For a socket with name "AAA" the previous resulting EXR layer name would be "AAA.AAA", i.e. the render layer as well as render pass would use the socket name.
Now the "render_layer.render_pass" scheme is ignored in multilayer files, socket names are directly written to EXR layers (EXR layer name is "AAA" in this example). If sockets should have a notion of "render layer" this can still be achieved by explicitly adding a separator, e.g. "AAA.BBB". When loading such layers into a Blender Image struct, the name is interpreted as a "render_layer.render_pass" again (although the image node does not care about it, see below).
* Socket sub-paths (for singlelayer) or layer names (for multilayer) are stored in dedicated string variables in the socket storage data. This way the RNA can define precise string subtypes (PROP_FILEPATH) and length. The file/layer slots are defined as separate structs with own name properties in the RNA as well, so they can be used nicely with the list template.
* Ensure unique socket paths/layer names to prevent overwriting of files and layers respectively.
--- Changes to Image node ---
* Loading multilayer OpenEXR files has improved layer name splitting into render layer + render pass names now. This properly supports arbitrary EXR layer names now.
Example:
OpenEXR layer name: AAA.BBB.CCC
is split into
Render layer name: AAA.BBB
Render pass name: CCC
If the layer name has no '.' separators the render layer name is empty.
* Image node ignores the selected render layer in the image user data. Instead all existing layers are displayed at the same time by combining the render layer names with render pass names again, to reconstruct the original EXR layer name. This avoids the problem that render layers with empty name are not selectetable in the dropdown and allows using all image layers at the same time without duplicating the node.
CD_PAINT_MASK is a layer of per-vertex floats for non-multires
meshes. Multires meshes use CD_GRID_PAINT_MASK, which is a layer of
per-loop GridPaintMask structures. GridPaintMask is similar to MDisp,
but contains an array of scalar floats.
Note: the GridPaintMask could be folded into MDisp, but this way
should be easier to add mask layers in the future (if we do fold
GridPaintMask into MDisp, the mask array should probably be an array
of arrays with a 'totmask' field so that mask layers can be easily
supported.)
Includes blenload read/write support for CD_PAINT_MASK and
CD_GRID_PAINT_MASK.
* ID-blocks referenced by Constraints but not being used as the target objects
(such as Actions in the Action Constraint, or Text Blocks in PyConstraints) now
get usercounts for being referenced in this way. This should fix ancient bugs
such as [#19205] and [#8593]. More tests still needed to verify that this
does now play nicely with proxies.
* Changing actions used by NLA strips should now update the usercounts
accordingly
For sample images see:
http://www.dalaifelinto.com/?p=399 (equisolid)
http://www.dalaifelinto.com/?p=389 (equidistant)
The 'use_panorama' option is now part of a new Camera type: 'Panorama'.
Created two other panorama cameras:
- Equisolid: most of lens in the market simulate this lens - e.g. Nikon, Canon, ...)
this works as a real lens up to an extent. The final result takes the
sensor dimensions into account also.
.:. to simulate a Nikon DX2S with a 10.5mm lens do:
sensor: 23.7 x 15.7
fisheye lens: 10.5
fisheye fov: 180
render dimensions: 4288 x 2848
- Equidistant: this is not a real lens model. Although the old equidistant lens simulate
this lens. The result is always as a circular fisheye that takes the whole sensor
(in other words, it doesn't take the sensor into consideration).
This is perfect for fulldomes ;)
For the UI we have 10 to 360 as soft values and 10 to 3600 as hard values (because we can).
Reference material:
http://www.hdrlabs.com/tutorials/downloads_files/HDRI%20for%20CGI.pdfhttp://www.bobatkins.com/photography/technical/field_of_view.html
Note, this is not a real simulation of the light path through the lens.
The ideal solution would be this:
https://graphics.stanford.edu/wikis/cs348b-11/Assignment3http://www.graphics.stanford.edu/papers/camera/
Thanks Brecht for the fix, suggestions and code review.
Kudos for the dome community for keeping me stimulated on the topic since 2009 ;)
Patch partly implemented during lab time at VisGraf, IMPA - Rio de Janeiro.
All operators which changes tracking data now just tags dopsheet as outdated,
actual re-calculaiton of happens only when this information is actually needed
(like on dopesheet draw).
This makes things a bit faster when there's no dopesheet visible in current
screen and also makes it much easier to update dopesheet using dependency
graph.
Also renamed dopesheet_sort_order to dopesheet_sort_method in rna and internal
stuff which makes much more sense and also correlated with naming in
file browser.
