the features that are needed to run the game. Compile tested with
scons, make, but not cmake, that seems to have an issue not related
to these changes. The changes include:
* GLSL support in the viewport and game engine, enable in the game
menu in textured draw mode.
* Synced and merged part of the duplicated blender and gameengine/
gameplayer drawing code.
* Further refactoring of game engine drawing code, especially mesh
storage changed a lot.
* Optimizations in game engine armatures to avoid recomputations.
* A python function to get the framerate estimate in game.
* An option take object color into account in materials.
* An option to restrict shadow casters to a lamp's layers.
* Increase from 10 to 18 texture slots for materials, lamps, word.
An extra texture slot shows up once the last slot is used.
* Memory limit for undo, not enabled by default yet because it
needs the .B.blend to be changed.
* Multiple undo for image painting.
* An offset for dupligroups, so not all objects in a group have to
be at the origin.
subsurf/derivedmesh mapping yet.
Also added int-to-pointer and back conversion function to solve warnings.
Note that it is only allowed to store an int in a pointer and then get
it back, but not a pointer in an int!
of strands changing between frames, vector blur couldn't work. Now
speed vectors are interpolated from the surface. This also means
child particles don't have to be computed in the previous and next
frames, so saves time too.
Directional Blur node allows the users to do various blur operations on the input
image. It essentially offers three different kind of ways of blurring in one node.
It is possible to blur using a certain direction, spin and zoom. These three ways
can be used in conjunction.
The node contains following controls:
*Iterations, Wrap
*Center: X, Y
*Distance, Angle
*Spin
*Zoom
Iterations is used to determine the smoothness of the result. The more iterations,
the smoother result. Low values are good for preview.
Wrap means that the image is wrapped as if it was tiled on both x and y directions.
To see better what this means, try it with spin for instance.
Center values (X and Y) determine the location which is used as a pivot point for
the operations. It is center (0.5) of the image by default.
Distance and angle are used to adjust directional blur. The result can be described
as a sweep that varies based on given distance (bigger distance, longer sweep) and
angle. Angle is given in degrees.
Spin produces rotating blur based on given angle. Yet again it is in degrees. Also
negative values work.
Zoom causes the image to be zoomed towards set center point (Center values).
Thanks to Alfredo de Greef (eeshlo) for contribution.
Possible development ideas:
*Make an algorithm to extend image in case spin is used. Extend would temporarily
change the size of the canvas of the input image. Canvas would be filled based on
colors on the edges of the input image. After the blur operation has been done,
the image would be cropped back to normal size. The advantage of this would be nicer
result of spin (no problems with image size) on a computational cost.
*Make values animatable. This is something that is better solved on more general
level. ("everything is animatable" paradigm)
*Provide an option to calculate automatic value for iterations. A good value that
produces a smooth result could be calculated based on direction deltas. This would be
useful in conjuction of animatable values.
=========
Merge of the famous particle patch by Janne Karhu, a full rewrite
of the Blender particle system. This includes:
- Emitter, Hair and Reactor particle types.
- Newtonian, Keyed and Boids physics.
- Various particle visualisation and rendering types.
- Vertex group and texture control for various properties.
- Interpolated child particles from parents.
- Hair editing with combing, growing, cutting, .. .
- Explode modifier.
- Harmonic, Magnetic fields, and multiple falloff types.
.. and lots of other things, some more info is here:
http://wiki.blender.org/index.php/BlenderDev/Particles_Rewritehttp://wiki.blender.org/index.php/BlenderDev/Particles_Rewrite_Doc
The new particle system cannot be backwards compatible. Old particle
systems are being converted to the new system, but will require
tweaking to get them looking the same as before.
Point Cache
===========
The new system to replace manual baking, based on automatic caching
on disk. This is currently used by softbodies and the particle system.
See the Cache API section on:
http://wiki.blender.org/index.php/BlenderDev/PhysicsSprint
Documentation
=============
These new features still need good docs for the release logs, help
for this is appreciated.
this bug is in 2.45 but can work around by setting it manually
---
import sys as pysys
try:
pysys.modules['__main__'].__arm_weakrefs
except:
pysys.modules['__main__'].__arm_weakrefs = {}
---
changed how draw modes work - when displaying textured meshes in editmode, only draw selected edges when "Edge Draw" is not enabled. this makes it easy to see the texture/mapping without edges getting in the way.
This means editmode can draw like UV/Face mode did when "Draw Edges" was disabled.
Also made the active vert/edge/face color themeable, still need to set the default to somthing other then pink.
added a stap menu to the UV/Image window for snapping the selection and cursor.
reverted to drawing face dots in editmode when Limit Selection is enabled. even though its not needed for selection its consistent and dosnt look like modes are being changed.
Rewrote the core-function responsible for ipo-cleaning. Now, it is in a less
wacko form. What is still not done is the conversion of a bunch of points
describing an arc to an arc defined by the handles of the keyframes on
either side of the arc. That will have to wait for the next development cycle.
This rewrite fixes two big bugs with the code:
* All but first curve got hidden aften cleaning
* Cleaning a curve with only two verts resulted in only one vert, even though
the values were not the same.
Please read:
http://www.blender3d.org/cms/Imaging.834.0.html
Or in short:
- adding MultiLayer Image support
- recoded entire Image API
- better integration of movie/sequence Images
Was a whole load of work... went down for a week to do this. So, will need
a lot of testing! Will be in irc all evening.
Mixdown option (blending sequence audio strips) didn't write proper WAV.
- file length in header chunk was too short (potential crasher)
- endian switch code used swab(), which wasn't defined to work when src and
target is identical
- cleaned up some code too... like removing timecursor() for core loop.
This first implementation only supports it for Meshes with UV maps, and
only tangents in V direction.
Tangent diffuse:
http://www.blender.org/bf/0001_0080.avi
Tangent spec, diffuse, and bump:
http://www.blender.org/bf/20001_0080.avi
NOTE: since UV coordinates are still very badly subsurfed, this won't work
well for subsurf meshes... on the todo.
On the todo;
- generate tangents for meshes without UV (with some options)
- use tangents from Curve/Surface
- add the Ashkimin shader from tracker
-----
Important bugfix; curves didn't render anymore since yesterday. :)
Set the option in EditMode, in 2nd mesh tools panel. It only works on
transform options now (grab/rot/scale), and of course assumes a near-
perfect symmetrical mesh. Mesh Object itself can be on any location
though (and rotated etc).
- Added (BKE_utildefines.h) POINTER_TO_INT(poin) and INT_TO_POINTER(int)
defines, to help fixing issues with switch to 64 bits systems. This
assumes that a) not more than 16GB mem is used and b) that address
space is below the 1<<35 value. The latter has to be confirmed, but it
seems to conform the current 64 bits generation of OSs (for mallocs).
Needless to say; use long if you want to store pointers! This is for
temporal fixing.
- Added editmesh version for mesh-octree lookups, not used yet.
- Fix: ESC on armature posemode restored the actions, should not happen
- Fix: If in NLA an action was 0 frame long, it caused draw error
- Fix: Click on name in Action Window now activates Bones
- Fix: "Snap to" options in Armature editmode now use X-axis mirror edit.
INIT_MINMAX and INIT_MINMAX2 are always used on floats but use doubles for initializing, giving countless warnings.
Added the nice 'f' to tell compilers that we want floats.
Render:
- New; support for dual CPU render (SDL thread)
Currently only works with alternating scanlines, but gives excellent
performance. For both normal render as unified implemented.
Note the "mutex" locks on z-transp buffer render and imbuf loads.
- This has been made possible by major cleanups in render code, especially
getting rid of globals (example Tin Tr Tg Tb Ta for textures) or struct
OSA or using Materials or Texture data to write to.
- Made normal render fully 4x32 floats too, and removed all old optimizes
with chars or shorts.
- Made normal render and unified render use same code for sky and halo
render, giving equal (and better) results for halo render. Old render
now also uses PostProcess options (brightness, mul, gamma)
- Added option ("FBuf") in F10 Output Panel, this keeps a 4x32 bits buffer
after render. Using PostProcess menu you will note an immediate re-
display of image too (32 bits RGBA)
- Added "Hue" and "Saturation" sliders to PostProcess options
- Render module is still not having a "nice" API, but amount of dependencies
went down a lot. Next todo: remove abusive "previewrender" code.
The last main global in Render (struct Render) now can be re-used for fully
controlling a render, to allow multiple "instances" of render to open.
- Renderwindow now displays a smal bar on top with the stats, and keeps the
stats after render too. Including "spare" page support.
Not only easier visible that way, but also to remove the awkward code that
was drawing stats in the Info header (extreme slow on some ATIs too)
- Cleaned up blendef.h and BKE_utildefines.h, these two had overlapping
defines.
- I might have forgotten stuff... and will write a nice doc on the architecture!
Colorband sliders now activate automatic on a click closer than 12 pixels
away from it. No more clumsy 'act' button stuff.
BTW: Error in utildefines.h, ABS() was defined incorrect.
http://www.loria.fr/~levy/Galleries/LSCM/index.htmlhttp://www.loria.fr/~levy/Papers/2002/s2002_lscm.pdf
Implementation Least Squares Conformal Maps parameterization, based on
chapter 2 of:
Bruno Levy, Sylvain Petitjean, Nicolas Ray, Jerome Maillot. Least Squares
Conformal Maps for Automatic Texture Atlas Generation. In Siggraph 2002,
July 2002.
Seams: Stored as a flag (ME_SEAM) in the new MEdge struct, these seams define
where a mesh will be cut when executing LSCM unwrapping. Seams can be marked
and cleared in Edit Mode. Ctrl+EKEY will pop up a menu allowing to Clear or Mark
the selected edges as seams.
Select Linked in Face Select Mode now only selects linked faces if no seams
separate them. So if seams are defined, this will now select the 'face group'
defined by the seams. Hotkey is still LKEY.
LSCM Unwrap: unwrap UV's by calculating a conformal mapping (preserving local
angles). Based on seams, the selected faces will be 'cut'. If multiple
'face groups' are selected, they will be unwrapped separately and packed in
the image rectangle in the UV Editor. Packing uses a simple and fast
algorithm, only designed to avoid having overlapping faces.
LSCM can be found in the Unwrap menu (UKEY), and the UV Calculation panel.
Pinning: UV's can be pinned in the UV Editor. When LSCM Unwrap is then
executed, these UV's will stay in place, allowing to tweak the solution.
PKEY and ALT+PKEY will respectively pin and unpin selected UV's.
Face Select Mode Drawing Changes:
- Draw Seams option to enable disable drawing of seams
- Draw Faces option to enable drawing of selected faces in transparent purple
- Draw Hidden Edges option to enable drawing of edges of hidden faces
- Draw Edges option to enable drawing of edges of visible faces
The colors for these seams, faces and edges are themeable.
transformation (from vertex -> world space), used defines for vecadd and
vecsub, and intersects quads more efficient.
Result is about 2 times faster.
- Added draw mode for empty used as forcefield
- added defines VECADD and VECSUB
bytes for RGB.
This to allow very bright contrasted images to be used for AO as well. As
a first start also the Texture->Colors panel now allows contrast setting
up to 5.0 (was 2.0).
First, check on the new files, which are listed below.
The new butspace.h is a local include, only to be used for the buttons
drawn in the buttonswindow.
- editbuts, animbuts, gamebuts, displaybuts, paintbuts, work now
- i quite completely reorganized it, it's now nicely telling you what
context it is in
- sorting error in panel align fixed (tabs were flipping)
- align works correctly automatic when you click around in Blender
- editsca.c renamed to buttons_logic.h
- button names are truncated from the right for allmost all buttons
(except text buttons and number buttons)
- while dragging panels, you cannot move them outside window anymore
And of course fixed loads of little bugs I encountered while testing
it all. This is a version I really need good test & feedback for.
Next step: restoring material/lamp/texture/world
(adding)
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
also the Makefile.in's were from previous patch adding
the system depend stuff to configure.ac
Kent
--
mein@cs.umn.edu
