For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`, which is a very ugly design
choice (hard to reason about).
Part of T74432.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`/`uiBut.a2`, which is a very ugly design
choice (hard to reason about).
Part of Part of T74432.
The current on-size-fits-all `uiBut` creates quite a mess, where it's
hard to reason about which members are free for use, under which
conditions they are used and how.
`uiBut` also has members that aren't used at times, violating the "don't
pay for what you don't use" principle.
To address this, we want to move to typed buttons, where `uiBut` is just
a base struct and each type extends it as needed. That structures data
better and type specific data is only available if it's actually used by
a button type.
Two trade-offs:
* Many casts to the derived type have to be done.
* Sometimes we change the button type after it's created. So I had to
add logic to reallocate the button for use with the new, possibly
derived struct. Ideally that wouldn't be needed, but for now that's
what we have.
Part of T74432.
Differential Revision: https://developer.blender.org/D7610
Reviewed by: Brecht Van Lommel, Campbell Barton
This replaces header include guards with `#pragma once`.
A couple of include guards are not removed yet (e.g. `__RNA_TYPES_H__`),
because they are used in other places.
This patch has been generated by P1561 followed by `make format`.
Differential Revision: https://developer.blender.org/D8466
button
This was reported for the FCurve modifier restrict ranges, but might fail
elsewhere, too. Reason is that the post_but has its range (hardmin/
hardmax etc) set before the updates to the active button take place, so
changes here dont end up on the post_but (even though the RNA range
function is properly called for a new defined button - new one is not the
same as the post_but though).
Now update the ranges on the post_but when that gets active.
Fixes T78763
Maniphest Tasks: T78763
Differential Revision: https://developer.blender.org/D8265
Use 'emboss' instead of 'draw_type' as enum, layout & functions use
the term emboss.
This issue was noted by @Poulpator in D8414, as `dt` is also an
abbreviation for delta-time.
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
This means all the antiailasing is done inside the fragment shader.
We use a Signed Distance Field to draw the 2D rounded boxes. This ensure
the best quality for AA.
This reduce the averge Batch for widget to 16 verts instead of ~600 and
reduce overshading a lot.
Theme Emboss alpha and tria alpha needs to be changed after this refactor.
The shadow drawing is left unchanged and still use geometry.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D7833
This implements a general system to implement drag and drop, subpanels,
and UI animation for the stack UIs in Blender. There are NO functional
changes in this patch, but it makes it relatively trivial to implement
these features for stacks.
The biggest complication to using panels to implement the UI for lists
is that there can be multiple modifiers of the same type. Currently there
is an assumed 1 to 1 relationship between every panel and its type, but
there can be multiple list items of the same type, so we have to break
this relationship. The mapping between panels and their data is stored
with an index in the panel's runtime struct.
To make use the system for a list like modifiers, four components
must be added:
1. A panel type defined and registered for each list data type, with a
known mapping between list data types and panel idnames.
1. A function called by interface code to build the add the panel
layouts with the provided helper functions.
- UI_panel_list_matches_data will check if the panel list needs to
be rebuilt.
- UI_panels_free_instanced will remove the existing list panels
- UI_panel_add_instanced adds a list panel of a given type.
3. An expand flag for the list data and implementations of
get_list_data_expand_flag and set_list_data_expand_flag.
4. For reordering, the panel type's reorder callback. This is called
when the instanced panels are drag-dropped. This requires
implementing a "move to index" operator for the list data.
Reviewed By: Severin, brecht
Differential Revision: https://developer.blender.org/D7490
The reason to have this isn't quite clear, but it looks like a vestige
of the 2.5 transition. Removing this makes dragging panels feel
much more responsive.
Thanks to Julian Eisel @Severin for the original change.
Differential Revision: https://developer.blender.org/D7803
Also remove draw-manager & depsgraph headers in interface_icons.c
Change this in 2.83 to prevent merge issues in master with
interface_intern.h header.
Makes the following layout changes possible:
{F8473498} {F8473499} {F8473502}
The next commit will contain many layout changes to make good use of
these new possibilities. The result should be more consistent, easier to
read and should give a more organized impression. Additionally, it
should be possible to replace many sub-panels with compacter layouts.
Main changes:
* Checkboxes now respect the property split layouts
* Add support for row and column headers (i.e.
`uiLayout.column(heading="Foo")`, `uiLayout.row(heading="Bar")`). If the
first property added to this layout doesn't insert anything into the label
split column, the heading is inserted there. Otherwise, it's inserted as own
item.
* Add support for manually inserting decorators for an existing item
(`uiLayout.prop_decorator()`). That way layout creators can manually insert
this, which was the only way I saw to support property split layouts with a
checkbox before the actual property. {F8471883}
* Autogenerated layouts for operator properties look bad if there are only
checkboxes (which only use half the region width). So before creating the
layout, we iterate over visible properties and disable split layout if all
are booleans. I think this is fine, if needed we could also add layout hints
to operators.
* `uiTemplateOperatorPropertyButs()` now handles macros itself, the caller
used to be responsible for this. Code that didn't handle these so far never
used macros I think, so this change should be invisible.
* Remove manual property split layout from autogenerated operator properties
layout.
* Padding of checkboxes is tweaked to make their label visually more connected
to the checkboxes.
* Support split layout for menus (should work for `uiLayout.menu()`,
`.operator_menu_enum()`, `.prop_menu_enum()`, maybe more)
Maniphest Task: https://developer.blender.org/T65965
Differential Revision: https://developer.blender.org/D7427
Reviewed by: Brecht Van Lommel, William Reynish, Pablo Vazques
- Show dimmed text for the menu entries leading up to the menu item.
- Show icons between the menu text and menu item.
- Use unicode right pointing triangle instead of arrow.
When updating the active button, the search data wasn't updated, so it
kept using the old pointers. A check in `ui_rna_collection_search_cb()`
relied on this incorrect behavior so I had to fix that too. Note that
the previous commit was also needed for the second fix to work.
Caused by c46dcdf887.
This has some advantages over operator search:
- Some operators need options set to be usefully accessed.
- Shows key bindings to access menus
(for actions that don't have key bindings themselves).
- Non operator actions such as check-boxes are also shown.
- Menu items can control execution context, using invoke or execute
where appropriate so we can control how the operator runs.
Part of the design task T74157.
This can be tested using the 'Experimental' preferences section
or selected in the key-map editor.
The old convention was easy to confuse with ScrArea.
Part of https://developer.blender.org/T74432.
This is mostly a batch rename with some manual fixing. Only single word
variable names are changed, no prefixed/suffixed names.
Brecht van Lommel and Campbell Barton both gave me a green light for
this convention change.
Also ran clan clang format on affected files.
Custom profiles in bevel allows the profile curve to be controlled by
manually placed control points. Orientation is regularized along
groups of edges, and the 'pipe case' is updated. This commit includes
many updates to comments and changed variable names as well.
A 'cutoff' vertex mesh method is added to bevel in addition to the
existing grid fill option for replacing vertices.
The UI of the bevel modifier and tool are updated and unified.
Also, a 'CurveProfile' widget is added to BKE for defining the profile
in the interface, which may be useful in other situations.
Many thanks to Howard, my mentor for this GSoC project.
Reviewers: howardt, campbellbarton
Differential Revision: https://developer.blender.org/D5516
This patch is only for the eyedropper to create materials.
Options:
Click: Create Stroke Material
Shift+Click: Create Fill Material.
Shift+Ctrl+Click: Create Stroke and Fill Material.
Toolbar:
{F7718606}
Reviewed By: brecht, mendio
Differential Revision: https://developer.blender.org/D5688
Without this patch there could only be one superimposed icon
and the operators were hard coded for the button types.
This keeps the previous, sort of predefined extra icons working in a
rather generic way, but allows adding specific ones for specific case
through `UI_but_extra_operator_icon_set()`.
Reviewed by: Campbell Barton
Differential Revision: https://developer.blender.org/D5730
This reverts commit 7761657129.
This commit broke overlapping popovers. For example in the color
management tab it would be impossible to select and of the popover
alternatives as it would switch to the menu button under the cursor.
sidebar UIList
nodesockets were actually drawn, but immediately drawn over by widgets
from the widget draw batch cache.
solution here is to "widgify" nodesocket drawing as well.
Reviewers: brecht
Maniphest Tasks: T57090
Differential Revision: https://developer.blender.org/D4963
Previously, if a boolean happened to use an icon there was no way
to make it display as a check-box from Python scripts.
The previous logic meant we ended up having to edit the RNA.
Since booleans with icons don't work well with the split-property layout
(now used for most of the interface).
Icons were being removed from RNA then added back using awkward Python
ternary expressions in the interface scripts.
The toggle argument now has an unset state (-1).
- toggle=True: no checkbox (emboss).
- toggle=False: always use a checkbox (no icon).
- toggle=(unset/-1): depends on the icon status, default as before.
Since toggle=False was default, this isn't used in existing UI logic.
- Resizable areas use 2D view bounds.
- Header uses the button bounds.
- A margin is added to avoid clicking between buttons.
- Region resize edges clamp to the 2D view bounds.
Resovles T61554
Use this for the save confirmation dialog so it has a default action
when pressing enter which draws with a highlight so it's clear what the
default action is (the dialog was just closing before).
Resolves T57686
