Currently you can retrieve a mutable array from a const CustomData.
That makes code unsafe since the compiler can't check for correctness
itself. Fix that by introducing a separate function to retrieve mutable
arrays from CustomData. The new functions have the `_for_write`
suffix that make the code's intention clearer.
Because it makes retrieving write access an explicit step, this change
also makes proper copy-on-write possible for attributes.
Notes:
- The previous "duplicate referenced layer" functions are redundant
with retrieving layers with write access
- The custom data functions that give a specific index only have
`for_write` to simplify the API
Differential Revision: https://developer.blender.org/D14140
**Changes**
As described in T93602, this patch removes all use of the `MVert`
struct, replacing it with a generic named attribute with the name
`"position"`, consistent with other geometry types.
Variable names have been changed from `verts` to `positions`, to align
with the attribute name and the more generic design (positions are not
vertices, they are just an attribute stored on the point domain).
This change is made possible by previous commits that moved all other
data out of `MVert` to runtime data or other generic attributes. What
remains is mostly a simple type change. Though, the type still shows up
859 times, so the patch is quite large.
One compromise is that now `CD_MASK_BAREMESH` now contains
`CD_PROP_FLOAT3`. With the general move towards generic attributes
over custom data types, we are removing use of these type masks anyway.
**Benefits**
The most obvious benefit is reduced memory usage and the benefits
that brings in memory-bound situations. `float3` is only 3 bytes, in
comparison to `MVert` which was 4. When there are millions of vertices
this starts to matter more.
The other benefits come from using a more generic type. Instead of
writing algorithms specifically for `MVert`, code can just use arrays
of vectors. This will allow eliminating many temporary arrays or
wrappers used to extract positions.
Many possible improvements aren't implemented in this patch, though
I did switch simplify or remove the process of creating temporary
position arrays in a few places.
The design clarity that "positions are just another attribute" brings
allows removing explicit copying of vertices in some procedural
operations-- they are just processed like most other attributes.
**Performance**
This touches so many areas that it's hard to benchmark exhaustively,
but I observed some areas as examples.
* The mesh line node with 4 million count was 1.5x (8ms to 12ms) faster.
* The Spring splash screen went from ~4.3 to ~4.5 fps.
* The subdivision surface modifier/node was slightly faster
RNA access through Python may be slightly slower, since now we need
a name lookup instead of just a custom data type lookup for each index.
**Future Improvements**
* Remove uses of "vert_coords" functions:
* `BKE_mesh_vert_coords_alloc`
* `BKE_mesh_vert_coords_get`
* `BKE_mesh_vert_coords_apply{_with_mat4}`
* Remove more hidden copying of positions
* General simplification now possible in many areas
* Convert more code to C++ to use `float3` instead of `float[3]`
* Currently `reinterpret_cast` is used for those C-API functions
Differential Revision: https://developer.blender.org/D15982
Attributes are unifying around a name-based API, and we would like to
be able to move away from CustomData in the future. This patch moves
the identification of active and fallback (render) color attributes
to strings on the mesh from flags on CustomDataLayer. This also
removes some ugliness used to retrieve these attributes and maintain
the active status.
The design is described more here: T98366
The patch keeps forward compatibility working until 4.0 with
the same method as the mesh struct of array refactors (T95965).
The strings are allowed to not correspond to an attribute, to allow
setting the active/default attribute independently of actually filling
its data. When applying a modifier, if the strings don't match an
attribute, they will be removed.
The realize instances / join node and join operator take the names from
the first / active input mesh. While other heuristics may be helpful
(and could be a future improvement), just using the first is simple
and predictable.
Differential Revision: https://developer.blender.org/D15169
PBVH draw code now builds coarse triangle index buffers
for multires. Note that the coarse grids can be at any
multires depth but is currently hardcoded to 1.
A utility function retrieved mesh arrays for every element after
05952aa94d which can be easily avoided. This was used when
building the GPU indices for sculpt mode drawing. In my tests this
saves 0.1ms per PBVH node. There may be very slight improvements
in line art and shrinkwrap as well.
Add command line argument to switch gpu backend. Add `--gpu-backend` option to
override the gpu backend selected by Blender.
Values for this option that will be available in releases for now are:
* opengl: Force blender to select OpenGL backend.
During development and depending on compile options additional values can exist:
* metal: Force Blender to select Metal backend.
When this option isn't provided the internal logic for GPU backend selection will be used.
Note that this is at the time of writing the same as always selecting the opengl backend.
Reviewed By: fclem, brecht, MichaelPW
Differential Revision: https://developer.blender.org/D16297
This is the conventional way of dealing with unused arguments in C++,
since it works on all compilers.
Regex find and replace: `UNUSED\((\w+)\)` -> `/*$1*/`
corresponding data layers and using their values for computations.
Avoiding that should increase performance in many operations that
would otherwise have to read, write, or propagate these values.
It also means decreased memory usage-- not just for sculpt mode
but for any mesh that was in sculpt mode. Previously the mask, face set,
and hide status layers were *always* allocated by sculpt mode.
Here are a few basic tests when masking and face sets are not used:
| Test | Before | After |
| Subsurf Modifier | 148 ms | 126 ms |
| Sculpt Overlay Extraction | 24 ms every redraw | 0 ms |
| Memory usage | 252 MB | 236 MB |
I wouldn't expect any difference when they are used though.
The code changes are mostly just making sculpt features safe for when
the layers aren't stored, and some changes to the conversion to and
from the hide layers. Use of the ".hide_poly" attribute replaces testing
whether face sets are negative in many places.
Differential Revision: https://developer.blender.org/D15937
This commit moves the hide status of mesh vertices, edges, and faces
from the `ME_FLAG` to optional generic boolean attributes. Storing this
data as generic attributes can significantly simplify and improve code,
as described in T95965.
The attributes are called `.hide_vert`, `.hide_edge`, and `.hide_poly`,
using the attribute name semantics discussed in T97452. The `.` prefix
means they are "UI attributes", so they still contain original data
edited by users, but they aren't meant to be accessed procedurally by
the user in arbitrary situations. They are also be hidden in the
spreadsheet and the attribute list by default,
Until 4.0, the attributes are still written to and read from the mesh
in the old way, so neither forward nor backward compatibility are
affected. This means memory requirements will be increased by one byte
per element when the hide status is used. When the flags are removed
completely, requirements will decrease when hiding is unused.
Further notes:
* Some code can be further simplified to skip some processing when the
hide attributes don't exist.
* The data is still stored in flags for `BMesh`, necessitating some
complexity in the conversion to and from `Mesh`.
* Access to the "hide" property of mesh elements in RNA is slower.
The separate boolean arrays should be used where possible.
Ref T95965
Differential Revision: https://developer.blender.org/D14685
This commit removes all EEVEE specific code from the `gpu_shader_material*.glsl`
files. It defines a clear interface to evaluate the closure nodes leaving
more flexibility to the render engine.
Some of the long standing workaround are fixed:
- bump mapping support is no longer duplicating a lot of node and is instead
compiled into a function call.
- bump rewiring to Normal socket is no longer needed as we now use a global
`g_data.N` for that.
Closure sampling with upstread weight eval is now supported if the engine needs
it.
This also makes all the material GLSL sources use `GPUSource` for better
debugging experience. The `GPUFunction` parsing now happens in `GPUSource`
creation.
The whole `GPUCodegen` now uses the `ShaderCreateInfo` and is object type
agnostic. Is has also been rewritten in C++.
This patch changes a view behavior for EEVEE:
- Mix shader node factor imput is now clamped.
- Tangent Vector displacement behavior is now matching cycles.
- The chosen BSDF used for SSR might change.
- Hair shading may have very small changes on very large hairs when using hair
polygon stripes.
- ShaderToRGB node will remove any SSR and SSS form a shader.
- SSS radius input now is no longer a scaling factor but defines an average
radius. The SSS kernel "shape" (radii) are still defined by the socket default
values.
Appart from the listed changes no other regressions are expected.
Use a shorter/simpler license convention, stops the header taking so
much space.
Follow the SPDX license specification: https://spdx.org/licenses
- C/C++/objc/objc++
- Python
- Shell Scripts
- CMake, GNUmakefile
While most of the source tree has been included
- `./extern/` was left out.
- `./intern/cycles` & `./intern/atomic` are also excluded because they
use different header conventions.
doc/license/SPDX-license-identifiers.txt has been added to list SPDX all
used identifiers.
See P2788 for the script that automated these edits.
Reviewed By: brecht, mont29, sergey
Ref D14069
This is a first part of the Shader Create Info system could be.
A shader create info provides a way to define shader structure, resources
and interfaces. This makes for a quick way to provide backend agnostic
binding informations while also making shader variations easy to declare.
- Clear source input (only one file). Cleans up the GPU api since we can create a
shader from one descriptor
- Resources and interfaces are generated by the backend (much simpler than parsing).
- Bindings are explicit from position in the array.
- GPUShaderInterface becomes a trivial translation of enums and string copy.
- No external dependency to third party lib.
- Cleaner code, less fragmentation of resources in several libs.
- Easy to modify / extend at runtime.
- no parser involve, very easy to code.
- Does not hold any data, can be static and kept on disc.
- Could hold precompiled bytecode for static shaders.
This also includes a new global dependency system.
GLSL shaders can include other sources by using #pragma BLENDER_REQUIRE(...).
This patch already migrated several builtin shaders. Other shaders should be migrated
one at a time, and could be done inside master.
There is a new compile directive `WITH_GPU_SHADER_BUILDER` this is an optional
directive for linting shaders to increase turn around time.
What is remaining:
- pyGPU API {T94975}
- Migration of other shaders. This could be a community effort.
Reviewed By: jbakker
Maniphest Tasks: T94975
Differential Revision: https://developer.blender.org/D13360
