Swap active sequence with the sequence on the right (CTRL+R) or left (CTRL+L).
was small Durian wish.
Note: in find_next_prev removed the code to find selected only if sel was != 0
I believe it should be possible to pass -1 in the case I want to find the next strip
regardless of selection state.
Changes how selecting linked left/right work since this conflicts. rather then Ctrl for left and Alt for right, Just use Alt and select the side based on the handle selected.
- invalid pointer was used for getting the sequencer length crashing blender or setting the length to negative values.
- printf_strip(seq) for debugging sequence strip locations
- Spelling: Cheet Sheet -> Cheat Sheet
belongs here still, but this came up often, it avoids having to
switch tabs a lot when creating things.
Also renamed uiLayoutFreeBlock to uiLayoutAbsoluteBlock.
Keymaps are now saveable and configurable from the user preferences, note
that editing one item in a keymap means the whole keymap is now defined by
the user and will not be updated by Blender, an option for syncing might be
added later. The outliner interface is still there, but I will probably
remove it.
There's actually 3 levels now:
* Default builtin key configuration.
* Key configuration loaded from .py file, for configs like Blender 2.4x
or other 3D applications.
* Keymaps edited by the user and saved in .B.blend. These can be saved
to .py files as well to make creating distributable configurations
easier.
Also, user preferences sections were reorganized a bit, now there is:
Interface, Editing, Input, Files and System.
Implementation notes:
* wmKeyConfig was added which represents a key configuration containing
keymaps.
* wmKeymapItem was renamed to wmKeyMapItem for consistency with wmKeyMap.
* Modal maps are not wrapped yet.
* User preferences DNA file reading did not support newdataadr() yet,
added this now for reading keymaps.
* Key configuration related settings are now RNA wrapped.
* is_property_set and is_property_hidden python methods were added.
This calls a registered menu as a popup so we can reuse header menus , currently used for Node editor and Sequencer add menu (Shift+A), can be used for toolbox too.
their handlers based on notifiers, which is simpler and more
reliable.
This fixes for example editmode or uv edit keymaps not working
when creating a new 3dview or image space.
#19345: can't get out of grayed out pointer field.
#19342: item_pointerR fields can't be cleared with one item.
#19341: fix hanging tooltips when manipulating regions.
#19339: context panel still allowed tabbing, but it has no header.
#19334: editing SSS settings crashed previewrender.
#19330: object mode could not be switched on from the header menu.
Appending and Linking
* Linking Operator, invokes filebrowser for Append/Link
* Separated the append/link function into three parts:
** BLO_library_append_begin finds main for appending
** BLO_library_append_named_part appends one Object,Group, Material, ...
** BLO_library_append_end actually reads and expands the libraries
NOTE 1:
I also changed the returned properties for the filebrowser operators to the following convention:
"path" - the full path to a file or directory, means what is in directory + filename buttons in filebrowser
"directory" - the content of the directory button in filebrowser
"filename" - the content of the filename button in filebrowser
Usually only path should be required, but in some cases it might be more convenient to retrieve the parts separately.
Ton, Brecht: If you have time to take a look, let me know if anything needs to be fixed.
Notifiers
---------
Various fixes for wrong use of notifiers, and some new notifiers
to make things a bit more clear and consistent, with two notable
changes:
* Geometry changes are now done with NC_GEOM, rather than
NC_OBJECT|ND_GEOM_, so an object does need to be available.
* Space data now use NC_SPACE|ND_SPACE_*, instead of data
notifiers or even NC_WINDOW in some cases. Note that NC_SPACE
should only be used for notifying about changes in space data,
we don't want to go back to allqueue(REDRAW..).
Depsgraph
---------
The dependency graph now has a different flush call:
DAG_object_flush_update(scene, ob, flag)
is replaced by:
DAG_id_flush_update(id, flag)
It still works basically the same, one difference is that it now
also accepts object data (e.g. Mesh), again to avoid requiring an
Object to be available. Other ID types will simply do nothing at
the moment.
Docs
----
I made some guidelines for how/when to do which kinds of updates
and notifiers. I can't specify totally exact how to make these
decisions, but these are basically the guidelines I use. So, new
and updated docs are here:
http://wiki.blender.org/index.php/BlenderDev/Blender2.5/NotifiersUpdateshttp://wiki.blender.org/index.php/BlenderDev/Blender2.5/DataNotifiers
Also, made the Outliner's horizontal scrollbar work better for keymaps view. It's still using an approximation of the width, but at least you can scroll now.
This brings back sequencer rendering, moving do_render_seq() into the
pipeline where it belongs.
Things to fix: SCENE-strip rendering and memory cleanup for
SCENE-strips.
Otherwise: enjoy :)
* When resizing the window, the top position is now preserved,
instead of the center position.
* Fix zoom level not being preserved in various cases, when
changing both with and height. This replaces some earlier code
which did this at screen level but wasn't very reliable.
* Different tabs now each preserve their own scroll.
* When switching between tabs, it now scrolls to show as many
buttons as possible, instead of possibly showing empty space.
There is a trade-off here between doing that keeping the
buttons in the same place, no ideal solution exists I think.
* Change zooming in/out to be symmetric, for example doing
numpad + then - did not give the original zoom level back.
* Added some calls to avoid hanging tooltips when manipulating
the view.
Internals:
* Added V2D_KEEPOFS_X and V2D_KEEPOFS_Y to keep the top/bottom
rather than the center.
* Renamed V2D_KEEPZOOM to V2D_LIMITZOOM (seems more appropriate),
and make V2D_KEEPZOOM preserve the zoom level.
* Image window only show game properties in game mode.
* Fix image window render info drawing wrong with alpha enabled.
* Win32 editmode cursor now uses a different one than the system
cursor, that one is barely visible, especially in the new theme
colors.
* Center text in operator header print.
* Fix sequencer unlock shortcut key.
* Fix uv layer / vertex color active render button now graying out.
* Workaround to get default zoom level 1:1 again for new buttons
(will try to fix properly later, is due to scrollbars).
* Side panels now use list widgets.
* Enabled theme colors for side panel.
* Add button in bookmarks panel.
* Operator panel title now uses operator name.
* For unix, added / to system, and home and desktop to bookmarks.
* For opening fileselect with filter, cleaned up the code a bit,
adding WM_operator_properties_filesel instead of duplicating code.
* Also added filter for all operators calling fileselect, only image
and file open did it before.
* Hide . files by default, and also hide files ending with ~.
* Added back .. (but not .) in the file list, I really missed this.
* File highlight now only happens when you're actually over a file,
instead staying after you move the mouse away.
* Fix some redraw/refresh issues.
* Enums can now be dynamically created in the _itemf callback,
using RNA_enum_item(s)_add, RNA_enum_item_end. All places asking
for enum items now need to potentially free the items.
* This callback now also gets context, this was added specifically
for operators. This doesn't fit design well at all, needed to do
some ugly hacks, but can't find a good solution at the moment.
* All enums must have a default list of items too, even with an
_itemf callback, for docs and fallback in case there is no context.
* Used by MESH_OT_merge, MESH_OT_select_similar, TFM_OT_select_orientation.
* Also changes some operator properties that were enums to booleas
(unselected, deselect), to make them consistent with other ops.
* 3D view Mesh menu works again, but incomplete.
* Add Properties and Toolbar to 3D View menu.
* Added "specials" menus back, vertex/edge/face and general.
* Various fixes in existing mesh operators, some were not working.
* Add MESH_OT_merge.
* Merge all subdivide ops into MESH_OT_subdivide, subdivide code
changes to make smooth + multi give good results.
* Rename all select inverse ops to *_OT_select_inverse.
* Fix "search for unknown operator" prints at startup, and some
warnings in py code.
* Don't run .pyc files on startup.
* Remove unused image window header C code.
* Rename BIF_transform/retopo.h to ED_transform/retopo.h
for consistency.
* Move MESH_OT_duplicate_add to editmesh_add.c.
* Remove some code from BIF_gl.h which is not needed there
anymore.
* Added icon to property and enum property items. The latter is
responsible for the large number of files changed.
* For RNA functions, added PROP_RNAPTR flag to ask for a PointerRNA
as argument instead of a C pointer, instead of doing it implicitly
with the AnyType type.
* Material: properly wrap diffuse/specular param variables, and
rename some things for consistency.
* MaterialTextureSlot: added "enabled" property (ma->septex).
* Image: make animated property editable.
* Image Editor: make some things editable, notifiers, respect state.
* Context: fix issue with screen not being set as ID.
svn merge https://svn.blender.org/svnroot/bf-blender/trunk/blender -r19820:HEAD
Notes:
* Game and sequencer RNA, and sequencer header are now out of date
a bit after changes in trunk.
* I didn't know how to port these bugfixes, most likely they are
not needed anymore.
* Fix "duplicate strip" always increase the user count for ipo.
* IPO pinning on sequencer strips was lost during Undo.
- Move buttons into the sequencer Nkey region
- Made the header and menu items use the python api, still need to get more buttons working.
- Fixed some minor problems
This allows the sequencers Add-Image strip to work like it does in 2.4x.
- as well as setting the "filename" operator property, operators can have collections called "files" and "dirs" which are set when available.
- RNA_OperatorFileListElement as new collection type, its a bit redundant since each item only has a "name" property but its needed since we don't have a string array type.
- the file selector now prints operators it runs.
Tested with python, adding a list of images works to the sequencer works.
bpy.ops.SEQUENCER_OT_image_strip_add(name="MyImages", start_frame=54, channel=2, filename="/somedir/", replace_sel=True, files=[{"name":"test1.png"}, {"name":"test2.png"}])
- Fix: text draw in fonts was slightly too low; it didn't calculate offset
correctly. Now it is aligned to have number characters in center.
- Fix: text clip was too wide, giving errors on extreme zoom in.
- Added boundbox-clipped default text drawing for view2d:
void UI_view2d_text_cache_rectf(View2D *v2d, rctf *rect, char *str)
(Note; also for previous commit, this cache immediately projects, so if
you change view2d while drawing, text is still on correct positions)
Added support for cached text drawing in View2D. Cache is needed to
prevent the viewmatrix being set/restored on each text drawing.
Adding a string:
void UI_view2d_text_cache_add(View2D *v2d, float x, float y, char *str)
Drawing:
void UI_view2d_text_cache_draw(ARegion *ar)
Nothing else needed; just make sure cache-draw is always called at end
of a view2d drawing function, to clear cache memory.
On todo for next: a version with a rectf boundary to clip text within.
* Added some properties of uiLayout that can be set. I've added
some API code for more than the two I've implementeds, so
ignore those for now.
* layout.active = False will gray out buttons inside a layout.
* layout.enabled = False will gray out and completely disable
the buttons inside a layout.
* Also some function renames.
1) Remove WITH_FREETYPE2 from code, so now blender always need freetype2
2) Remove the old bmfont
3) Remove ftfont and bFTGL library
4) Implement a new BLF_draw_default function for place that still need/use
the old BMF api.
I try to update both, scons and cmake, but I only can test with make, so
hope all work fine.
MSVC is broken, but I don't have Windows, things to search and fix are
any reference to WITH_FREETYPE2, FTGL and BMFONT (take in care that
blenkernel also have a BKE_bmfont.h, this don't have anything to do with bmfont).
Always have to link/include the freetype2 library
Remove any reference to libbmfont
Remove any reference to libftfont
Remove any reference to libbftgl (or libbFTGL)
* Made separator item work horizontal & vertical.
* Add colon (:) automatic for int/float/enum/string.
* Added space variables to uiStyle and use them in the
layout engine.
* Added initial World buttons by Thomas Dinges, thanks!
* Added some code for modifiers in the Object Data context.
This will become a template though.
* Use a common poll() callback in the scripts to reduce code.
* Headers and menus can now be created in python.
* Replaced the uiMenuItem functions to create menus with equivalent
uiItem functions using a layout, removing duplicated code.
* More uiItem functions are now exposed to python.
* The text editor header, panels and one of its menus are now created
in space_text.py.
* Buttons window data context icon new changes depending on active
object.
Issues
* Icons are not wrapped yet, hardcoded ints at the moment.
* The ID browse template is unfinished.
