Blender does string based searching in many different places.
This patch updates four of these places to use the new string
search api in `BLI_string_search.h`.
In the future we probably want to update the other searches as well.
Reviewers: Severin, pablovazquez
Differential Revision: https://developer.blender.org/D8825
-1 is a valid value to pass as RNA float precision. We let the UI code
figure out an appropriate precision then. So don't fail the assert if
-1 is passed.
For the man rationale behind this design, see 49f088e2d0. Further,
this removes users of uiBut.a1/uiBut.a2, which is a very ugly design
choice (hard to reason about).
Note that I had to do rather ugly, specific exceptions for the number
buttons in `ui_def_but_rna()`. But once all users of a1/a2 are removed,
this special handling shouldn't be needed anymore.
I also had to move a sanity check out of the button definition. It's now
moved into a new debug only sanity checking function executed when
finishing the layout definition (block end).
This was reported for the "Add Node" search functionality, but is
relevant in other searches as well.
So e.g. when searching for "Separate XYZ", typing "sep", then " " (with
the intention to type "X" next) would clear the search field. Now use
the same method (matching against all search words) as in F3 searching
('menu_search_update_fn') in other searches as well [searching IDs,
property objects, finding nodes,...]
This should give a much nicer search experience in general.
Note: this does not touch other searches in the Dopesheet, Outliner,
Filebrowser or User Preferences that have other search implementations.
Maniphest Tasks: T78084
Differential Revision: https://developer.blender.org/D8232
We do this in a couple of places, so it's worth having the logic wrapped
into a function.
Also, the only way to set the disabled hint for a button from outside of
`interface/` was through `UI_block_lock_set()`/`UI_block_lock_clear()`,
for which the usage isn't obvious when you just try to disable a single
button.
- Use WM_operatortype_description to get the operator description.
- Pass properties to WM_operatortype_name,
so the operator name callback is used.
- Add UI_but_operatortype_get_from_enum_menu function
to access the operator from enum menus.
- Change WM_operatortype_description to return NULL when there is no
description, use WM_operatortype_description_or_name
when either can be used.
Display negative zero floats as regular zero. Does not alter underlying value.
Differential Revision: https://developer.blender.org/D4795
Reviewed by Brecht Van Lommel
I only skipped a few loops in the monstrous ui_handle_menu_event
function. Also, I only changed variable names where necessary to
prevent redeclarations.
Differential Revision: https://developer.blender.org/D8586
Final releases (including beta) should strictly show features that are
finalized to prevent loss of data, old API clanging around, and the
overall quality of the product (Blender) presented.
Note that rendering should never be affected by user preferences, so
this is only changing things in the UI level.
Development note: This is reset experimental UI on file load.
Also note: to hide RNA (needed for hair and particles) will be done as a
separate patch.
Differential Revision: https://developer.blender.org/D8606
This commit renames 'execute' to 'run' because:
- This follows Python's "PyRun" which these functions wrap.
- Execution functions can use either exec/eval modes,
making naming awkward (for future API refactoring).
For the main rationale behind this design, see 49f088e2d0. Further,
this removes users of uiBut.a1, which is a very ugly design
choice (hard to reason about).
Part of T74432.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`, which is a very ugly design
choice (hard to reason about).
Part of T74432.
For the main rationale behind this design, see 03b122e2a18df. Further,
this removes users of `uiBut.a1`/`uiBut.a2`, which is a very ugly design
choice (hard to reason about).
Part of Part of T74432.
The current on-size-fits-all `uiBut` creates quite a mess, where it's
hard to reason about which members are free for use, under which
conditions they are used and how.
`uiBut` also has members that aren't used at times, violating the "don't
pay for what you don't use" principle.
To address this, we want to move to typed buttons, where `uiBut` is just
a base struct and each type extends it as needed. That structures data
better and type specific data is only available if it's actually used by
a button type.
Two trade-offs:
* Many casts to the derived type have to be done.
* Sometimes we change the button type after it's created. So I had to
add logic to reallocate the button for use with the new, possibly
derived struct. Ideally that wouldn't be needed, but for now that's
what we have.
Part of T74432.
Differential Revision: https://developer.blender.org/D7610
Reviewed by: Brecht Van Lommel, Campbell Barton
The icons are label buttons. Usually these are not editable and can not
become active. These are draggable ones though (so dragging files can be
dragged by dragging the icon) which creates an exception to this rule.
So hovering the icon would activate its label and when executing the
rename operator via shortcut it wouldn't get exited properly. This broke
the invariant of only allowing a single active button at a time.
Added an assert to check that invariant now.
Letting the code to activate the text button ensure any currently active
button is exited seems sensible.
button
This was reported for the FCurve modifier restrict ranges, but might fail
elsewhere, too. Reason is that the post_but has its range (hardmin/
hardmax etc) set before the updates to the active button take place, so
changes here dont end up on the post_but (even though the RNA range
function is properly called for a new defined button - new one is not the
same as the post_but though).
Now update the ranges on the post_but when that gets active.
Fixes T78763
Maniphest Tasks: T78763
Differential Revision: https://developer.blender.org/D8265
Use 'emboss' instead of 'draw_type' as enum, layout & functions use
the term emboss.
This issue was noted by @Poulpator in D8414, as `dt` is also an
abbreviation for delta-time.
Showing the Python error without any explanation is often
not enough information and doesn't hint that the error was in the
user input.
The error report from a invalid expression such as '..1' used to be:
('invalid syntax', ('<string>', 1, 1, '..1'))
Now reads:
Error evaluating number, see Info editor for details: invalid syntax
Address issue raised by T78913.
Regression from d6cefef98f
This also fixes an unreported issue where finding an exact match
wasn't being detected for items that contained an ID prefix.
Custom driver functions need access to the dependency graph that is
triggering the evaluation of the driver. This patch passes the
dependency graph pointer through all the animation-related calls.
Instead of passing the evaluation time to functions, the code now passes
an `AnimationEvalContext` pointer:
```
typedef struct AnimationEvalContext {
struct Depsgraph *const depsgraph;
const float eval_time;
} AnimationEvalContext;
```
These structs are read-only, meaning that the code cannot change the
evaluation time. Note that the `depsgraph` pointer itself is const, but
it points to a non-const depsgraph.
FCurves and Drivers can be evaluated at a different time than the
current scene time, for example when evaluating NLA strips. This means
that, even though the current time is stored in the dependency graph, we
need an explicit evaluation time.
There are two functions that allow creation of `AnimationEvalContext`
objects:
- `BKE_animsys_eval_context_construct(Depsgraph *depsgraph, float
eval_time)`, which creates a new context object from scratch, and
- `BKE_animsys_eval_context_construct_at(AnimationEvalContext
*anim_eval_context, float eval_time)`, which can be used to create a
`AnimationEvalContext` with the same depsgraph, but at a different
time. This makes it possible to later add fields without changing any
of the code that just want to change the eval time.
This also provides a fix for T75553, although it does require a change
to the custom driver function. The driver should call
`custom_function(depsgraph)`, and the function should use that depsgraph
instead of information from `bpy.context`.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D8047
This addresses warnings from Clang-Tidy's `readability-else-after-return`
rule in the `source/blender/editors/interface` module.
No functional changes.
Makes the following layout changes possible:
{F8473498} {F8473499} {F8473502}
The next commit will contain many layout changes to make good use of
these new possibilities. The result should be more consistent, easier to
read and should give a more organized impression. Additionally, it
should be possible to replace many sub-panels with compacter layouts.
Main changes:
* Checkboxes now respect the property split layouts
* Add support for row and column headers (i.e.
`uiLayout.column(heading="Foo")`, `uiLayout.row(heading="Bar")`). If the
first property added to this layout doesn't insert anything into the label
split column, the heading is inserted there. Otherwise, it's inserted as own
item.
* Add support for manually inserting decorators for an existing item
(`uiLayout.prop_decorator()`). That way layout creators can manually insert
this, which was the only way I saw to support property split layouts with a
checkbox before the actual property. {F8471883}
* Autogenerated layouts for operator properties look bad if there are only
checkboxes (which only use half the region width). So before creating the
layout, we iterate over visible properties and disable split layout if all
are booleans. I think this is fine, if needed we could also add layout hints
to operators.
* `uiTemplateOperatorPropertyButs()` now handles macros itself, the caller
used to be responsible for this. Code that didn't handle these so far never
used macros I think, so this change should be invisible.
* Remove manual property split layout from autogenerated operator properties
layout.
* Padding of checkboxes is tweaked to make their label visually more connected
to the checkboxes.
* Support split layout for menus (should work for `uiLayout.menu()`,
`.operator_menu_enum()`, `.prop_menu_enum()`, maybe more)
Maniphest Task: https://developer.blender.org/T65965
Differential Revision: https://developer.blender.org/D7427
Reviewed by: Brecht Van Lommel, William Reynish, Pablo Vazques
For buttons representing node inputs (e.g. in the material properties)
rather than drawing some generic socket icon, the actual sockets are
drawn now. That includes color, shape and the selection outline.
This should make it easier to understand what these buttons relate to.
Screenshots: {F8469252}, {F8469248} (The left alignment will be done in
a follow-up commit.)
Differential Revision: https://developer.blender.org/D7409
Reviewed by: Brecht Van Lommel, Clément Foucault, William Reynish
- Show dimmed text for the menu entries leading up to the menu item.
- Show icons between the menu text and menu item.
- Use unicode right pointing triangle instead of arrow.
