This patch adds (selected/active) outline around a curve object in object mode.
{F13270680}
In the past the draw bounds option was enabled for any curve objects. With this
patch it isn't needed and will be disabled.
In the future the curve outline could also be enabled to improve GPU selection.
Reviewed By: dfelinto, HooglyBoogly, fclem
Maniphest Tasks: T95933
Differential Revision: https://developer.blender.org/D15308
Commit 302b04a5a3 introduced new retiming system, that unified sound
pitch animation with strip speed control. Because sound playback is
handled in different way, this did not work as expected and old files
were broken. In addition animation was not copied to new property.
Revert length position and offset handling for sound strips so their
position does not change and remap fcurves to new `speed_factor`
property.
This commit contains various new features for curves sculpt mode
that have been developed in parallel.
* Selection:
* Operator to select points/curves randomly.
* Operator to select endpoints of curves.
* Operator to grow/shrink an existing selection.
* New Brushes:
* Pinch: Moves points towards the brush center.
* Smooth: Makes individual curves straight without changing the root
or tip position.
* Puff: Makes curves stand up, aligning them with the surface normal.
* Density: Add or remove curves to achieve a certain density defined
by a minimum distance value.
* Slide: Move root points on the surface.
Differential Revision: https://developer.blender.org/D15134
This commit adds a new face nearest snapping mode, adds new snapping
options, and (lightly) refactors code around snapping.
The new face nearest snapping mode will snap transformed geometry to the
nearest surface in world space. In contrast, the original face snapping
mode uses projection (raycasting) to snap source to target geometry.
Face snapping therefore only works with what is visible, while nearest
face snapping can snap geometry to occluded parts of the scene. This new
mode is critical for retopology work, where some of the target mesh
might be occluded (ex: sliding an edge loop that wraps around the
backside of target mesh).
The nearest face snapping mode has two options: "Snap to Same Target"
and "Face Nearest Steps". When the Snap to Same Object option is
enabled, the selected source geometry will stay near the target that it
is nearest before editing started, which prevents the source geometry
from snapping to other targets. The Face Nearest Steps divides the
overall transformation for each vertex into n smaller transformations,
then applies those n transformations with surface snapping interlacing
each step. This steps option handles transformations that cross U-shaped
targets better.
The new snapping options allow the artist to better control which target
objects (objects to which the edited geometry is snapped) are considered
when snapping. In particular, the only option for filtering target
objects was a "Project onto Self", which allowed the currently edited
mesh to be considered as a target. Now, the artist can choose any
combination of the following to be considered as a target: the active
object, any edited object that isn't active (see note below), any non-
edited object. Additionally, the artist has another snapping option to
exclude objects that are not selectable as potential targets.
The Snapping Options dropdown has been lightly reorganized to allow for
the additional options.
Included in this patch:
- Snap target selection is more controllable for artist with additional
snapping options.
- Renamed a few of the snap-related functions to better reflect what
they actually do now. For example, `applySnapping` implies that this
handles the snapping, while `applyProject` implies something entirely
different is done there. However, better names would be
`applySnappingAsGroup` and `applySnappingIndividual`, respectively,
where `applySnappingIndividual` previously only does Face snapping.
- Added an initial coordinate parameter to snapping functions so that
the nearest target before transforming can be determined(for "Snap to
Same Object"), and so the transformation can be broken into smaller
steps (for "Face Nearest Steps").
- Separated the BVH Tree getter code from mesh/edit mesh to its own
function to reduce code duplication.
- Added icon for nearest face snapping.
- The original "Project onto Self" was actually not correct! This option
should be called "Project onto Active" instead, but that only matters
when editing multiple meshes at the same time. This patch makes this
change in the UI.
Reviewed By: Campbell Barton, Germano Cavalcante
Differential Revision: https://developer.blender.org/D14591
This patch includes the full shadow functionality for LineArt:
- Light contour and cast shadow lines.
- Lit/shaded region selection.
- Enclosed light/shadow shape calculation.
- Silhouette/anti-silhouette selection.
- Intersection priority based on shadow edge identifier.
Reviewed By: Sebastian Parborg (zeddb)
Differential Revision: https://developer.blender.org/D15109
Patch implements better way to control playback speed than it is
possible to do with speed effect. Speed factor property can be set in
Time panel.
There are 2 layers of control:
Option to retime movie to match scene FPS rate.
Custom speed factor to control playback rate.
Since playback rate is strip property, it is now possible to manipulate
strip as normal one even if it is retimed.
To facilitate manipulation, some functions need to consider speed factor
and apply necessary corrections to strip offset or strip start. These
corrections may need to be float numbers, so start and offsets must be
float as well.
Sound strips now use speed factor instead of pitch. This means, that
strips will change length to match usable length. In addition, it is
possible to group movie and sound strip and change speed of meta strip.
Commit 277fa2f441 added channels region to unintended editors if sequencer was
used in area. This caused issues with some editors having 2 tool regions and
non functioning side panel.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D15253
One case of copying image formats was not properly using BKE_image_format_copy.
To fix this for existing .blend file we need to do versioning, ensuring the curve
mapping is properly copied.
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
This commit ports the "Set Spline Type" node to the new curves type.
Performance should be improved in similar ways to the other refactors
from the conversion task (T95443). Converting to and from Catmull Rom
curves is now supported. There are a few cases where a lot of work can
be skipped: when the number of points doesn't change, and when the
types already match the goal type.
The refactor has a few other explicit goals as well:
- Don't count on initialization of attribute arrays when they are
first allocated.
- Avoid copying the entire data-block when possible.
- Make decisions about which attributes to copy when changing curves
more obvious.
- Use higher-level methods to copy data between curve points.
- Optimize for the common cases of single types and full selections.
- Process selected curves of the same types in the same loop.
The Bezier to NURBS conversion is written by Piotr Makal (@pmakal).
Differential Revision: https://developer.blender.org/D14769
This patch makes it possible to manipulate strips without need to use
update functions to recalculate effect and meta strips.
Prior to this change function `SEQ_time_update_sequence` had to be used
to update mainly effects and meta strips. This was implemented in a way
that relied on sorted list of strips, which can't always be done and in
rare cases this approach failed.
In case of meta strips, `seqbase` had to be passed and compared with
"active" one to determine whether meta strip should be updated or not.
This is especially weak system that is prone to bugs when functions are
used by python API functions.
Finally, other strip types had startdisp` and `enddisp` fields updated
by this function and a lot of code relied on these fields even if strip
start, length and offsets are available. This is completely
unnecessary.
Implemented changes:
All effects and meta strips are updated when strip handles are moved or
strip is translated, without need to call any update function.
Function `SEQ_time_update_sequence` has been split to
`SEQ_time_update_meta_strip_range` and
`seq_time_update_effects_strip_range`. These functions should be only
used within sequencer module code. Meta update is used for versioning,
which is only reason for it not being declared internally.
Sequence fields `startdisp` and `enddisp` are now only used for
effects to store strip start and end points. These fields should be
used only internally within sequencer module code.
Use function `SEQ_time_*_handle_frame_get` to get strip start and end
points.
To update effects and meta strips with reasonable performance, cache
for "parent" meta strip and attached effects is added to
`SequenceLookup` cache, so it shares invalidation mechanisms.
All caches are populated during single iteration.
There should be no functional changes.
Differential Revision: https://developer.blender.org/D14990
To clarify term still frame: This is portion of strip that displays
static image. This area can exist before or after strip movie content.
Still frames were implemented as strip property, but this was never
displayed in panel. Only way to set still frames was to drag strip
handle with mouse or using python API. This would set either
`seq->*still` or `seq->*ofs` where * stands for `start` or `end`.
When strip had offset, it can't have still frames and vice versa, but
this had to be enforced in RNA functions and everywhere in code where
these fields are set directly. Strip can not have negative offset or
negative number of still frames.
This is not very practical approach and still frames can be simply
implemented as applying negative offset. Merging these offsets would
simplify offset calculations for example in D14962 and could make it
easier to also deprecate usage `seq->*disp` and necessity to call
update functions to recalculate strip boundaries.
For users only functional change is ability to set negative strip offset
using property in side panel.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D14976
This completes support for tiled texture packing on the Blender / Cycles
side of things.
Most of these changes fall into one of three categories:
- Updating Image handling code to pack/unpack tiled and multi-view images
- Updating Cycles to handle tiled textures through BlenderImageLoader
- Updating OSL to properly handle textures with multiple slots
Differential Revision: https://developer.blender.org/D14395
This adds an input to the Subdivision node to specify a field to use
for controling vertex creases. Common code with edge creasing was
extracted into utility functions to avoid redundancy.
Differential Revision: https://developer.blender.org/D14199
Inspired by D12936 and D12929, this patch adds general purpose
"Combine Color" and "Separate Color" nodes to Geometry, Compositor,
Shader and Texture nodes.
- Within Geometry Nodes, it replaces the existing "Combine RGB" and
"Separate RGB" nodes.
- Within Compositor Nodes, it replaces the existing
"Combine RGBA/HSVA/YCbCrA/YUVA" and "Separate RGBA/HSVA/YCbCrA/YUVA"
nodes.
- Within Texture Nodes, it replaces the existing "Combine RGBA" and
"Separate RGBA" nodes.
- Within Shader Nodes, it replaces the existing "Combine RGB/HSV" and
"Separate RGB/HSV" nodes.
Python addons have not been updated to the new nodes yet.
**New shader code**
In node_color.h, color.h and gpu_shader_material_color_util.glsl,
missing methods hsl_to_rgb and rgb_to_hsl are added by directly
converting existing C code. They always produce the same result.
**Old code**
As requested by T96219, old nodes still exist but are not displayed in
the add menu. This means Python scripts can still create them as usual.
Otherwise, versioning replaces the old nodes with the new nodes when
opening .blend files.
Differential Revision: https://developer.blender.org/D14034
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
- Verrtex paint mode has been refactored into C++ templates.
It now works with both byte and float colors and point
& corner attribute domains.
- There is a new API for mixing colors (also based
on C++ templates). Unlike the existing APIs byte
and float colors are interpolated identically.
Interpolation does happen in a squared rgb space,
this may be changed in the future.
- Vertex paint now uses the sculpt undo system.
Reviewed By: Brecht Van Lommel.
Differential Revision: https://developer.blender.org/D14179
Ref D14179
The "PROP" in the name reflects its generic status, and removing
"LOOP" makes sense because it is no longer associated with just
mesh face corners. In general the goal is to remove extra semantic
meaning from the custom data types.
This adds a new node editor overlay that helps users to see where
named attributes are used. This is important, because named
attributes can have name collisions between independent node
groups which can lead to hard to find issues.
Differential Revision: https://developer.blender.org/D14618
This change moves the grid panel UI from the View tab up into the
Overlay panel.
Reasons to move to the Overlay panel include:
- Consistency with the grid options in the 3D viewport
- The grid has been drawn as an Overlay for quite some time already
Additional changes that now make sense to have:
- The grid responds to the main Overlay show/hide toggle
- Adds a toggle to show/hide the grid which is consistent with overlays in general
As before, these grid controls are only available for active UV edit
sessions.
Differential Revision: https://developer.blender.org/D11862
Expose the "Connected" mode from the weld modifier in the
"Merge by Distance" geometry node. This method only merges
vertices along existing edges, but it can be much faster
because it doesn't have to build a KD Tree of all selected
points.
Differential Revision: https://developer.blender.org/D14321
color attribute system.
This commit removes sculpt colors from experimental
status and unifies it with vertex colors. It
introduces the concept of "color attributes", which
are any attributes that represents colors. Color
attributes can be represented with byte or floating-point
numbers and can be stored in either vertices or
face corners.
Color attributes share a common namespace
(so you can no longer have a floating-point
sculpt color attribute and a byte vertex color
attribute with the same name).
Note: this commit does not include vertex paint mode,
which is a separate patch, see:
https://developer.blender.org/D14179
Differential Revision: https://developer.blender.org/D12587
Ref D12587
This patch adds channel region to VSE timeline area for drawing channel
headers. It is synchronizedwith timeline region. 3 basic features are
implemented - channel visibility, locking and name.
Channel data is stored in `SeqTimelineChannel` which can be top-level
owned by `Editing`, or it is owned by meta strip to support nesting.
Strip properties are completely independent and channel properties are
applied on top of particular strip property, thus overriding it.
Implementation is separate from channel regions in other editors. This
is mainly because style and topology is quite different in VSE. But
also code seems to be much more readable this way.
Currently channels use functions similar to VSE timeline to draw
background to provide illusion of transparency, but only for background
and sfra/efra regions.
Great portion of this patch is change from using strip visibility and
lock status to include channel state - this is facilitated by functions
`SEQ_transform_is_locked` and `SEQ_render_is_muted`
Originally this included changes in D14263, but patch was split for
easier review.
Reviewed By: fsiddi, Severin
Differential Revision: https://developer.blender.org/D13836
When creating with hierarchies, core code only generates system
overrides, responsibility to define 'user overrides' is then for the
higher-level calling code (Editor/Operator-level).
do_version code uses fairly basic euristics, should be good enough here
though in most cases. and can always be refined later if needed.
Ref: {T95707}.
This patch makes the grease pencil smooth operation symmetric.
It also increases the performance a lot if strong smoothing is
required. Additionally there is an option for the position smooth
operation to keep the shape closer to the original for more iterations.
Since the result differs from the previous algorithm, versioning is used
to change the iterations and factor to match the old result.
Differential Revision: http://developer.blender.org/D14325
There is a dedicated Library Override display mode now, and showing
these elsewhere just adds noise and makes the code problematic to
maintain (since the same element hierarchy will be used in two entirely
different contexts). The corresponding filter settings are removed too.
Part of T95802.
Reviewed by: Bastien Montagne
Differential Revision: https://developer.blender.org/D14411
This adds a new Add brush for the new curves object type in sculpt mode.
The brush is used to insert new curves (typically hair) on the surface object.
Supported features:
* Add single curve exactly at the cursor position when `Add Amount` is 1.
* Front faces only.
* Independent interpolate shape and interpolate length settings.
* Smooth and flat shading affects curve shape interpolation.
* Spherical and projection brush.
This also adds the `surface_triangle_index` and `surface_triangle_coordinate`
attributes. Those store information about what position on the surface each
added curve is attached to:
* `surface_triangle_index` (`int`): Index of the internal triangle that a curve
is attached to. `-1` when the curve is not attached to the surface.
* `surface_triangle_coordinate` (`float2`): First two numbers of a barycentric
coordinate that reference a specific position within the triangle.
Ref T96444.
Differential Revision: https://developer.blender.org/D14340
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
So far it was needed to declare a new RNA struct to `RNA_access.h` manually.
Since 9b298cf3db we generate a `RNA_prototypes.h` for RNA property
declarations. Now this also includes the RNA struct declarations, so they don't
have to be added manually anymore.
Differential Revision: https://developer.blender.org/D13862
Reviewed by: brecht, campbellbarton
This patch enables all 8 combinations of Nurbs modes: Cyclic,
Bezier and Endpoint. Also removes restriction on Bezier Nurbs order.
The most significant changes are mode combinations bringing new
meaning. In D13891 is a scheme showing NURBS with same control
points in a modes, and also further description of each possible case.
Differential Revision: https://developer.blender.org/D13891
`3DView`'s `use_snap` option has little or nothing to do with using
snapping in `UV`, `Nodes` or `Sequencer`.
So there are no real advantages to keeping these options in sync.
Therefore, individualize the option to use snap for each "spacetype".
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D13310
The flags overlapped ever since normalize was added, so this
requires versioning to copy the flag value. This needs to be
done both in Blender 3.1 and 3.2.
Differential Revision: https://developer.blender.org/D14165
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
